## How to activate N-rollover
-- Hold left `SHIFT` and right `SHIRT` and then tap `N`.
+- Hold left `SHIFT` and right `SHIFT` and then tap `N`.
## How to make and flash on OS X
#define randmul 181
#define randmod 167
+/* Filler to make layering a bit clearer *
+ * borrowed from basic keymap */
+
+#define _______ KC_TRNS
+
#endif
#include "planck.h"
#ifdef BACKLIGHT_ENABLE
- #include "backlight.h"
+#include "backlight.h"
#endif
#include "config.h"
#include "quantum.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QW] = { /* Qwerty */
{KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
- {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT},
+ {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MT(MOD_RSFT, KC_ENT)},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT },
{KC_TAB, M(M_LED), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+ /* Note that KC_SPC is recorded TWICE, so that either matrix position can activate it */
},
[_RS] = { /* RAISE */
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
- {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
- {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, KC_TRNS},
- {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+ {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
+ {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, _______},
+ {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
[_LW] = { /* LOWER */
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
- {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
- {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, KC_TRNS},
- {KC_TRNS, DF(_KP), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+ {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
+ {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, _______},
+ {_______, DF(_KP), _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
[_KP] = { /* Key Pad */
{KC_ESC, M(M_USERNAME), M(M_VERSION), KC_F10, KC_F11, KC_F12, KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC},
}
};
+/* What is fn_actions actually used for??? */
const uint16_t PROGMEM fn_actions[] = {
};
This was originally based on the default keyboard map, but I have been
doing sundry experimentation:
-1. Experiments
+1. Useful Experiments
----------------------------------------
- * To figure things out about the toolset
- * I'm an Emacs guy, so will be needing a fair bit of tuning
* It made sense to mess around some with keyboard maps.
- - I tried added Workman alongside Dvorak and Colemak
- - Boy, oh boy, these don't help!!!
- - I have done 30 years of learning of Emacs key mappings, and
- these alternative keyboards massively mess me up
- I added a keypad, originally based on keymaps/numpad.c, but
mighty substantially revised, as that one seems to be rotated 90
degrees from usual conventions for number pads
- Key [2][2] aka "a" uses a random number generator to select a digit 0-9 at random
- Key [3][2] aka "z" uses a random number generator to select a letter a-z at random
- Key [1][3] aka "e" spits out the keymap version number
+ * Minor use of Space Cadet Shift; my SHIFT key has switched to KC_LSP0, so that when I just hit SHIFT, I get a left parens: ( which is great for Lisping. I don't have a Right Shift, so I don't get an autoclose; I think I'll live with that until a Planck successor with more lines of keys :-)
2. Some code structure ideas
---------------------------------------------------
and shift ESC off the first column so KC_LCTL and KC_LALT can
be on the first column.
* I needed to swap ' and ENTER
+ * I tried added Workman alongside Dvorak and Colemak
+ - Boy, oh boy, these don't help!!!
+ - I have done 30 years of learning of Emacs key mappings, and
+ these alternative keyboards massively mess me up
+
+4. TODO
+---------------------------------------------------------
+
+ * I use tmux quite a lot; the mollat keymap seems to have some
+ interesting helpers. It might be interesting to add a "tmux
+ layer," or to have a few keys in a layer oriented towards that
+ * The mollat tmux layer also suggests some thoughts about Emacs
+ helpers.
+ * I do not presently have anything that handles X11 screen
+ switching, as with Control-Alt-various
+ * I ought to probably look into KC_LEAD, to have some key combos
+ that do not need to be concurrent
+ * The jeebak keymap seems to have some neat ideas:
+ - Number layer which is aggressive about having numbers in several places
+ - Touch layer seems interesting
+ * Trying out sgoodwin's "hold Enter down to get Shift"
\ No newline at end of file
# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
+# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
+CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
*/
/* disable debug print */
-//#define NO_DEBUG
+#ifndef NO_DEBUG
+# define NO_DEBUG
+#endif
/* disable print */
-//#define NO_PRINT
+// #ifndef NO_PRINT
+// # define NO_PRINT
+// #endif
+
+/* Only print user print statements */
+#define USER_PRINT
+
/* disable action features */
//#define NO_ACTION_LAYER
#define SC_ACLS LALT(KC_F4)
#define SC_CCLS LCTL(KC_F4)
+#define TG_NKRO MAGIC_TOGGLE_NKRO
#define OS_SHFT KC_FN0
#define _______ KC_TRNS
[LAYER_ADJUST] = {
{ XXXXXXX, M_BRTOG, M_BSPDU, M_BSPDD, M_BDFLT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MU_TOG , AU_TOG },
{ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX },
- { XXXXXXX, M_QWRTY, XXXXXXX, XXXXXXX, M_BACKL, RESET , XXXXXXX, M_MOUSE, XXXXXXX, XXXXXXX, MUV_IN , XXXXXXX },
+ { XXXXXXX, M_QWRTY, XXXXXXX, XXXXXXX, M_BACKL, RESET , TG_NKRO, M_MOUSE, XXXXXXX, XXXXXXX, MUV_IN , XXXXXXX },
{ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_UPPER, XXXXXXX, XXXXXXX, M_LOWER, XXXXXXX, TMPO_DN, MUV_DE , TMPO_UP }
},
}
const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_MODS_ONESHOT(MOD_LSFT),
+ [0] = ACTION_MODS_ONESHOT(MOD_RSFT),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
--- /dev/null
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+# Build Options
+# change to "no" to disable the options, or define them in the makefile.mk in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
\ No newline at end of file
--- /dev/null
+//Author: tong92 <tong92power@gmail.com>
+
+#include "planck.h"
+#ifdef BACKLIGHT_ENABLE
+ #include "backlight.h"
+#endif
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define LOWER M(1)
+#define RAISE M(2)
+#define GO_DEFT M(99)
+#
+
+//MIT Layout
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* 0: Qwerty layer (Default)
+* ,-----------------------------------------------------------------------.
+* |Tab | q | w | e | r | t | y | u | i | o | p | BS |
+* |-----------------------------------------------------------------------|
+* |Ctrl | a | s | d | f | g | h | j | k | l | ; |enter|
+* |-----------------------------------------------------------------------|
+* |Shift| z | x | c | v | b | n | m | , | . | / |Shift|
+* |-----------------------------------------------------------------------|
+* | Fn |Ctrl | Win | Alt |Lower| Space |Upper| ' | [ | ] | Alt |
+* `-----------------------------------------------------------------------'
+*/
+[0] ={
+{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
+{KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_ENT },
+{KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT},
+{MO(4), KC_RCTL,KC_LGUI,KC_LALT,LOWER,KC_SPC,KC_SPC,RAISE,KC_QUOT,KC_LBRC,KC_RBRC,KC_RALT}
+},
+/* 1: Lower layer
+* ,-----------------------------------------------------------------------.
+* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | BS |
+* |-----------------------------------------------------------------------|
+* | | F1 | F2 | F3 | F4 | F5 | F6 | - | + | [ | ] | \ |
+* |-----------------------------------------------------------------------|
+* | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo|
+* |-----------------------------------------------------------------------|
+* | | | | | | SPACE |mouse| END | LEFT| DOWN|RIGHT|
+* `-----------------------------------------------------------------------'
+*/
+[1] ={
+{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC },
+{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS },
+{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,KC_F12,_______,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN },
+{XXXXXXX,_______,_______,_______,_______,KC_SPC,KC_SPC,_______,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT}
+},
+/* 2: Upper layer
+* ,-----------------------------------------------------------------------.
+* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | BS |
+* |-----------------------------------------------------------------------|
+* | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | |
+* |-----------------------------------------------------------------------|
+* | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo|
+* |-----------------------------------------------------------------------|
+* | | | | |mouse| SPACE | | END | LEFT| DOWN|RIGHT|
+* `-----------------------------------------------------------------------'
+*/
+[2] ={
+{KC_TILD,KC_EXLM,KC_AT, KC_HASH,KC_DLR, KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC },
+{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS,KC_EQL, KC_LCBR,KC_RCBR,KC_PIPE },
+{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN },
+{XXXXXXX,_______,_______,_______,_______,KC_SPC, KC_SPC, _______,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT}
+},
+/* 4: fn layer (Window shortcuts)
+* ,-----------------------------------------------------------------------.
+* | ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DEL |
+* |-----------------------------------------------------------------------|
+* | |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | |
+* |-----------------------------------------------------------------------|
+* | |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | |
+* |-----------------------------------------------------------------------|
+* | |DeskL|DeskR|DeskX|Task | ChangeLang| | | | | LED |
+* `-----------------------------------------------------------------------'
+*/
+[4] ={
+{KC_ESC ,LALT(KC_F4) ,LGUI(KC_UP) ,XXXXXXX ,XXXXXXX ,S(KC_CAPS) ,XXXXXXX,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_DELT},
+{_______,LGUI(KC_LEFT) ,LGUI(KC_DOWN) ,LGUI(KC_RIGHT) ,XXXXXXX ,LALT(KC_CAPS),KC_CAPS,KC_LEFT,KC_DOWN,KC_RIGHT,XXXXXXX,XXXXXXX},
+{_______,LGUI(LSFT(KC_LEFT)),LGUI(LSFT(KC_RIGHT)),XXXXXXX ,XXXXXXX ,LCTL(KC_CAPS),KC_SLCK,KC_HOME,XXXXXXX,KC_END,XXXXXXX,XXXXXXX},
+{KC_TRNS,LGUI(LCTL(KC_LEFT)),LGUI(LCTL(KC_RIGHT)),LGUI(LCTL(KC_F4)),LCTL(LALT(KC_DELT)),LGUI(KC_SPC),LGUI(KC_SPC),XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,M(0)}
+},
+/* 10: mouse layer
+* ,-----------------------------------------------------------------------.
+* | | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| |RESET|
+* |-----------------------------------------------------------------------|
+* | | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | |
+* |-----------------------------------------------------------------------|
+* | | | | | | | |M_AC0|M_AC1|M_AC2| | |
+* |-----------------------------------------------------------------------|
+* | | | | | | GO_DEFT | | | | | |
+* `-----------------------------------------------------------------------'
+*/
+[10] ={
+{XXXXXXX,XXXXXXX,XXXXXXX,KC_MS_U,XXXXXXX,XXXXXXX,XXXXXXX,KC_WH_L,KC_WH_U,KC_WH_R,XXXXXXX,RESET},
+{XXXXXXX,XXXXXXX,KC_MS_L,KC_MS_D,KC_MS_R,XXXXXXX,XXXXXXX,KC_BTN1,KC_WH_D,KC_BTN2,XXXXXXX,XXXXXXX},
+{XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_ACL0,KC_ACL1,KC_ACL2,XXXXXXX,XXXXXXX},
+{XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,GO_DEFT,GO_DEFT,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX}
+}
+
+};
+//Layout END
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ #ifdef BACKLIGHT_ENABLE
+ backlight_step();
+ #endif
+ }
+ break;
+ case 1:
+ if (record->event.pressed) {
+ layer_on(1);
+ update_tri_layer(1, 2, 10);
+ } else {
+ layer_off(1);
+ update_tri_layer(1, 2, 10);
+ }
+ break;
+ case 2:
+ if (record->event.pressed) {
+ layer_on(2);
+ update_tri_layer(1, 2, 10);
+ } else {
+ layer_off(2);
+ update_tri_layer(1, 2, 10);
+ }
+ break;
+ case 99:
+ if (record->event.pressed) {
+ layer_off(10);
+ layer_off(1);
+ layer_off(2);
+ layer_on(0);
+ update_tri_layer(0 ,1 ,2);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
\ No newline at end of file
--- /dev/null
+# The Tong92 Layout
+- MIT Layout
+- my keymap for WIndow User
+- Lower && Upper Hold -> Mouse Layer
+- Mouse Layer : space -> Default Layer
+- No Audio
+
+## 1. Default Layer - Qwerty
+
+ ,-----------------------------------------------------------------------.
+ |Tab | q | w | e | r | t | y | u | i | o | p | BS |
+ |-----------------------------------------------------------------------|
+ |Ctrl | a | s | d | f | g | h | j | k | l | ; |enter|
+ |-----------------------------------------------------------------------|
+ |Shift| z | x | c | v | b | n | m | , | . | / |Shift|
+ |-----------------------------------------------------------------------|
+ | Fn |Ctrl | Win | Alt |Lower| Space |Upper| ' | [ | ] | Alt |
+ `-----------------------------------------------------------------------'
+
+## 2. Lower Layer
+
+ ,-----------------------------------------------------------------------.
+ | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | BS |
+ |-----------------------------------------------------------------------|
+ | | F1 | F2 | F3 | F4 | F5 | F6 | - | + | [ | ] | \ |
+ |-----------------------------------------------------------------------|
+ | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo|
+ |-----------------------------------------------------------------------|
+ | | | | | | SPACE |mouse| END | LEFT| DOWN|RIGHT|
+ `-----------------------------------------------------------------------'
+
+## 3. Upper Layer
+
+ ,-----------------------------------------------------------------------.
+ | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | BS |
+ |-----------------------------------------------------------------------|
+ | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | |
+ |-----------------------------------------------------------------------|
+ | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo|
+ |-----------------------------------------------------------------------|
+ | | | | |mouse| SPACE | | END | LEFT| DOWN|RIGHT|
+ `-----------------------------------------------------------------------'
+
+## 4. Fn Layer - Window Shortcuts
+
+ ,-----------------------------------------------------------------------.
+ | ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DEL |
+ |-----------------------------------------------------------------------|
+ | |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | |
+ |-----------------------------------------------------------------------|
+ | |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | |
+ |-----------------------------------------------------------------------|
+ | |DeskL|DeskR|DeskX|Task | ChangeLang| | | | | LED |
+ `-----------------------------------------------------------------------'
+
+## 5. Mouse Layer
+
+ ,-----------------------------------------------------------------------.
+ | | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| |RESET|
+ |-----------------------------------------------------------------------|
+ | | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | |
+ |-----------------------------------------------------------------------|
+ | | | | | | | |M_AC0|M_AC1|M_AC2| | |
+ |-----------------------------------------------------------------------|
+ | | | | | |GO_DEFAULT | | | | | |
+ `-----------------------------------------------------------------------'
\ No newline at end of file
#include "eeconfig.h"
#include "keycode.h"
+#ifndef KEYCODE_CONFIG_H
+#define KEYCODE_CONFIG_H
+
uint16_t keycode_config(uint16_t keycode);
/* NOTE: Not portable. Bit field order depends on implementation */
} keymap_config_t;
extern keymap_config_t keymap_config;
+
+#endif /* KEYCODE_CONFIG_H */
MAGIC_UNSWAP_BACKSLASH_BACKSPACE,
MAGIC_UNHOST_NKRO,
MAGIC_UNSWAP_ALT_GUI,
+ MAGIC_TOGGLE_NKRO,
// Leader key
#ifndef DISABLE_LEADER
return false;
break;
#endif
- case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_UNSWAP_ALT_GUI:
+ case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_TOGGLE_NKRO:
if (record->event.pressed) {
// MAGIC actions (BOOTMAGIC without the boot)
if (!eeconfig_is_enabled()) {
}
/* keymap config */
keymap_config.raw = eeconfig_read_keymap();
- if (keycode == MAGIC_SWAP_CONTROL_CAPSLOCK) {
- keymap_config.swap_control_capslock = 1;
- } else if (keycode == MAGIC_CAPSLOCK_TO_CONTROL) {
- keymap_config.capslock_to_control = 1;
- } else if (keycode == MAGIC_SWAP_LALT_LGUI) {
- keymap_config.swap_lalt_lgui = 1;
- } else if (keycode == MAGIC_SWAP_RALT_RGUI) {
- keymap_config.swap_ralt_rgui = 1;
- } else if (keycode == MAGIC_NO_GUI) {
- keymap_config.no_gui = 1;
- } else if (keycode == MAGIC_SWAP_GRAVE_ESC) {
- keymap_config.swap_grave_esc = 1;
- } else if (keycode == MAGIC_SWAP_BACKSLASH_BACKSPACE) {
- keymap_config.swap_backslash_backspace = 1;
- } else if (keycode == MAGIC_HOST_NKRO) {
- keymap_config.nkro = 1;
- } else if (keycode == MAGIC_SWAP_ALT_GUI) {
- keymap_config.swap_lalt_lgui = 1;
- keymap_config.swap_ralt_rgui = 1;
- }
- /* UNs */
- else if (keycode == MAGIC_UNSWAP_CONTROL_CAPSLOCK) {
- keymap_config.swap_control_capslock = 0;
- } else if (keycode == MAGIC_UNCAPSLOCK_TO_CONTROL) {
- keymap_config.capslock_to_control = 0;
- } else if (keycode == MAGIC_UNSWAP_LALT_LGUI) {
- keymap_config.swap_lalt_lgui = 0;
- } else if (keycode == MAGIC_UNSWAP_RALT_RGUI) {
- keymap_config.swap_ralt_rgui = 0;
- } else if (keycode == MAGIC_UNNO_GUI) {
- keymap_config.no_gui = 0;
- } else if (keycode == MAGIC_UNSWAP_GRAVE_ESC) {
- keymap_config.swap_grave_esc = 0;
- } else if (keycode == MAGIC_UNSWAP_BACKSLASH_BACKSPACE) {
- keymap_config.swap_backslash_backspace = 0;
- } else if (keycode == MAGIC_UNHOST_NKRO) {
- keymap_config.nkro = 0;
- } else if (keycode == MAGIC_UNSWAP_ALT_GUI) {
- keymap_config.swap_lalt_lgui = 0;
- keymap_config.swap_ralt_rgui = 0;
+ switch (keycode)
+ {
+ case MAGIC_SWAP_CONTROL_CAPSLOCK:
+ keymap_config.swap_control_capslock = true;
+ break;
+ case MAGIC_CAPSLOCK_TO_CONTROL:
+ keymap_config.capslock_to_control = true;
+ break;
+ case MAGIC_SWAP_LALT_LGUI:
+ keymap_config.swap_lalt_lgui = true;
+ break;
+ case MAGIC_SWAP_RALT_RGUI:
+ keymap_config.swap_ralt_rgui = true;
+ break;
+ case MAGIC_NO_GUI:
+ keymap_config.no_gui = true;
+ break;
+ case MAGIC_SWAP_GRAVE_ESC:
+ keymap_config.swap_grave_esc = true;
+ break;
+ case MAGIC_SWAP_BACKSLASH_BACKSPACE:
+ keymap_config.swap_backslash_backspace = true;
+ break;
+ case MAGIC_HOST_NKRO:
+ keymap_config.nkro = true;
+ break;
+ case MAGIC_SWAP_ALT_GUI:
+ keymap_config.swap_lalt_lgui = true;
+ keymap_config.swap_ralt_rgui = true;
+ break;
+ case MAGIC_UNSWAP_CONTROL_CAPSLOCK:
+ keymap_config.swap_control_capslock = false;
+ break;
+ case MAGIC_UNCAPSLOCK_TO_CONTROL:
+ keymap_config.capslock_to_control = false;
+ break;
+ case MAGIC_UNSWAP_LALT_LGUI:
+ keymap_config.swap_lalt_lgui = false;
+ break;
+ case MAGIC_UNSWAP_RALT_RGUI:
+ keymap_config.swap_ralt_rgui = false;
+ break;
+ case MAGIC_UNNO_GUI:
+ keymap_config.no_gui = false;
+ break;
+ case MAGIC_UNSWAP_GRAVE_ESC:
+ keymap_config.swap_grave_esc = false;
+ break;
+ case MAGIC_UNSWAP_BACKSLASH_BACKSPACE:
+ keymap_config.swap_backslash_backspace = false;
+ break;
+ case MAGIC_UNHOST_NKRO:
+ keymap_config.nkro = false;
+ break;
+ case MAGIC_UNSWAP_ALT_GUI:
+ keymap_config.swap_lalt_lgui = false;
+ keymap_config.swap_ralt_rgui = false;
+ break;
+ case MAGIC_TOGGLE_NKRO:
+ keymap_config.nkro = !keymap_config.nkro;
+ break;
+ default:
+ break;
}
eeconfig_update_keymap(keymap_config.raw);
+ clear_keyboard(); // clear to prevent stuck keys
+
return false;
}
break;
unregister_mods(MOD_BIT(KC_LSFT));
}
return false;
- break;
+ // break;
}
case KC_RSPC: {
unregister_mods(MOD_BIT(KC_RSFT));
}
return false;
- break;
+ // break;
}
default: {
shift_interrupted[0] = true;
#include "action_util.h"
#include "action_layer.h"
#include "timer.h"
+#include "keycode_config.h"
+
+extern keymap_config_t keymap_config;
+
static inline void add_key_byte(uint8_t code);
static inline void del_key_byte(uint8_t code);
void add_key(uint8_t key)
{
#ifdef NKRO_ENABLE
- if (keyboard_protocol && keyboard_nkro) {
+ if (keyboard_protocol && keymap_config.nkro) {
add_key_bit(key);
return;
}
void del_key(uint8_t key)
{
#ifdef NKRO_ENABLE
- if (keyboard_protocol && keyboard_nkro) {
+ if (keyboard_protocol && keymap_config.nkro) {
del_key_bit(key);
return;
}
uint8_t get_first_key(void)
{
#ifdef NKRO_ENABLE
- if (keyboard_protocol && keyboard_nkro) {
+ if (keyboard_protocol && keymap_config.nkro) {
uint8_t i = 0;
for (; i < KEYBOARD_REPORT_BITS && !keyboard_report->nkro.bits[i]; i++)
;
#define xfprintf(func, format, ...) __xfprintf(func, PSTR(format), ##__VA_ARGS__)
void __xprintf(const char *format_p, ...); /* Send formatted string to the registered device */
-void __xsprintf(char*, const char *format_p, ...); /* Put formatted string to the memory */
-void __xfprintf(void(*func)(uint8_t), const char *format_p, ...); /* Send formatted string to the specified device */
+// void __xsprintf(char*, const char *format_p, ...); /* Put formatted string to the memory */
+// void __xfprintf(void(*func)(uint8_t), const char *format_p, ...); /* Send formatted string to the specified device */
/* Format string is placed in the ROM. The format flags is similar to printf().
/*-----------------------------------------------------------------------------*/
char xatoi(char **str, long *ret);
-/* Get value of the numeral string.
+/* Get value of the numeral string.
str
Pointer to pointer to source string
}
eeconfig_update_keymap(keymap_config.raw);
-#ifdef NKRO_ENABLE
- keyboard_nkro = keymap_config.nkro;
-#endif
-
/* default layer */
uint8_t default_layer = 0;
if (bootmagic_scan_keycode(BOOTMAGIC_KEY_DEFAULT_LAYER_0)) { default_layer |= (1<<0); }
print_val_hex8(keyboard_protocol);
print_val_hex8(keyboard_idle);
#ifdef NKRO_ENABLE
- print_val_hex8(keyboard_nkro);
+ print_val_hex8(keymap_config.nkro);
#endif
print_val_hex32(timer_read32());
// NKRO toggle
case MAGIC_KC(MAGIC_KEY_NKRO):
clear_keyboard(); // clear to prevent stuck keys
- keyboard_nkro = !keyboard_nkro;
- if (keyboard_nkro) {
+ keymap_config.nkro = !keymap_config.nkro;
+ if (keymap_config.nkro) {
print("NKRO: on\n");
} else {
print("NKRO: off\n");
#include "util.h"
#include "debug.h"
-
-#ifdef NKRO_ENABLE
-bool keyboard_nkro = true;
-#endif
-
static host_driver_t *driver;
static uint16_t last_system_report = 0;
static uint16_t last_consumer_report = 0;
extern "C" {
#endif
-#ifdef NKRO_ENABLE
-extern bool keyboard_nkro;
-#endif
-
extern uint8_t keyboard_idle;
extern uint8_t keyboard_protocol;
# include "visualizer/visualizer.h"
#endif
+
+
#ifdef MATRIX_HAS_GHOST
static bool has_ghost_in_row(uint8_t row)
{
rgblight_init();
#endif
#if defined(NKRO_ENABLE) && defined(FORCE_NKRO)
- keyboard_nkro = true;
+ keymap_config.nkro = 1;
#endif
}
/* keymap config */
keymap_config.raw = eeconfig_read_keymap();
-#ifdef NKRO_ENABLE
- keyboard_nkro = keymap_config.nkro;
-#endif
-
uint8_t default_layer = 0;
default_layer = eeconfig_read_default_layer();
default_layer_set((uint32_t)default_layer);
#define STRING_STACK_LIMIT 120
//TODO
-int xprintf(const char* format, ...) { return 0; }
+int __xprintf(const char* format, ...) { return 0; }
#if 0
/* mbed Serial */
extern "C" {
#endif
-int xprintf(const char *format, ...);
+int __xprintf(const char *format, ...);
#ifdef __cplusplus
}
#ifndef NO_PRINT
+#if defined(__AVR__) /* __AVR__ */
-#if defined(__AVR__)
+# include "avr/xprintf.h"
-#include "avr/xprintf.h"
-#define print(s) xputs(PSTR(s))
-#define println(s) xputs(PSTR(s "\r\n"))
+# ifdef USER_PRINT /* USER_PRINT */
-#ifdef __cplusplus
+// Remove normal print defines
+# define print(s)
+# define println(s)
+# undef xprintf
+# define xprintf(fmt, ...)
+
+// Create user print defines
+# define uprint(s) xputs(PSTR(s))
+# define uprintln(s) xputs(PSTR(s "\r\n"))
+# define uprintf(fmt, ...) __xprintf(PSTR(fmt), ##__VA_ARGS__)
+
+# else /* NORMAL PRINT */
+
+// Create user & normal print defines
+# define print(s) xputs(PSTR(s))
+# define println(s) xputs(PSTR(s "\r\n"))
+# define uprint(s) print(s)
+# define uprintln(s) println(s)
+# define uprintf(fmt, ...) xprintf(fmt, ...)
+
+# endif /* USER_PRINT / NORMAL PRINT */
+
+# ifdef __cplusplus
extern "C"
-#endif
+# endif
+
/* function pointer of sendchar to be used by print utility */
void print_set_sendchar(int8_t (*print_sendchar_func)(uint8_t));
-#elif defined(PROTOCOL_CHIBIOS) /* __AVR__ */
+#elif defined(PROTOCOL_CHIBIOS) /* PROTOCOL_CHIBIOS */
+
+# include "chibios/printf.h"
+
+# ifdef USER_PRINT /* USER_PRINT */
+
+// Remove normal print defines
+# define print(s)
+# define println(s)
+# define xprintf(fmt, ...)
+
+// Create user print defines
+# define uprint(s) printf(s)
+# define uprintln(s) printf(s "\r\n")
+# define uprintf printf
+
+# else /* NORMAL PRINT */
+
+// Create user & normal print defines
+# define print(s) printf(s)
+# define println(s) printf(s "\r\n")
+# define xprintf printf
+# define uprint(s) printf(s)
+# define uprintln(s) printf(s "\r\n")
+# define uprintf printf
-#include "chibios/printf.h"
+# endif /* USER_PRINT / NORMAL PRINT */
-#define print(s) printf(s)
-#define println(s) printf(s "\r\n")
-#define xprintf printf
+#elif defined(__arm__) /* __arm__ */
-#elif defined(__arm__) /* __AVR__ */
+# include "mbed/xprintf.h"
-#include "mbed/xprintf.h"
+# ifdef USER_PRINT /* USER_PRINT */
-#define print(s) xprintf(s)
-#define println(s) xprintf(s "\r\n")
+// Remove normal print defines
+# define print(s)
+# define println(s)
+# define xprintf(fmt, ...)
+
+// Create user print defines
+# define uprintf(fmt, ...) __xprintf(fmt, ...)
+# define uprint(s) xprintf(s)
+# define uprintln(s) xprintf(s "\r\n")
+
+# else /* NORMAL PRINT */
+
+// Create user & normal print defines
+# define xprintf(fmt, ...) __xprintf(fmt, ...)
+# define print(s) xprintf(s)
+# define println(s) xprintf(s "\r\n")
+# define uprint(s) print(s)
+# define uprintln(s) println(s)
+# define uprintf(fmt, ...) xprintf(fmt, ...)
+
+# endif /* USER_PRINT / NORMAL PRINT */
/* TODO: to select output destinations: UART/USBSerial */
-#define print_set_sendchar(func)
+# define print_set_sendchar(func)
+
+#endif /* __AVR__ / PROTOCOL_CHIBIOS / __arm__ */
+
+// User print disables the normal print messages in the body of QMK/TMK code and
+// is meant as a lightweight alternative to NOPRINT. Use it when you only want to do
+// a spot of debugging but lack flash resources for allowing all of the codebase to
+// print (and store their wasteful strings).
+//
+// !!! DO NOT USE USER PRINT CALLS IN THE BODY OF QMK/TMK !!!
+//
+#ifdef USER_PRINT
-#endif /* __AVR__ */
+// Disable normal print
+#define print_dec(data)
+#define print_decs(data)
+#define print_hex4(data)
+#define print_hex8(data)
+#define print_hex16(data)
+#define print_hex32(data)
+#define print_bin4(data)
+#define print_bin8(data)
+#define print_bin16(data)
+#define print_bin32(data)
+#define print_bin_reverse8(data)
+#define print_bin_reverse16(data)
+#define print_bin_reverse32(data)
+#define print_val_dec(v)
+#define print_val_decs(v)
+#define print_val_hex8(v)
+#define print_val_hex16(v)
+#define print_val_hex32(v)
+#define print_val_bin8(v)
+#define print_val_bin16(v)
+#define print_val_bin32(v)
+#define print_val_bin_reverse8(v)
+#define print_val_bin_reverse16(v)
+#define print_val_bin_reverse32(v)
+#else /* NORMAL_PRINT */
+//Enable normal print
/* decimal */
#define print_dec(i) xprintf("%u", i)
#define print_decs(i) xprintf("%d", i)
#define print_val_bin_reverse16(v) xprintf(#v ": %016b\n", bitrev16(v))
#define print_val_bin_reverse32(v) xprintf(#v ": %032lb\n", bitrev32(v))
+#endif /* USER_PRINT / NORMAL_PRINT */
+
+// User Print
+
+/* decimal */
+#define uprint_dec(i) uprintf("%u", i)
+#define uprint_decs(i) uprintf("%d", i)
+/* hex */
+#define uprint_hex4(i) uprintf("%X", i)
+#define uprint_hex8(i) uprintf("%02X", i)
+#define uprint_hex16(i) uprintf("%04X", i)
+#define uprint_hex32(i) uprintf("%08lX", i)
+/* binary */
+#define uprint_bin4(i) uprintf("%04b", i)
+#define uprint_bin8(i) uprintf("%08b", i)
+#define uprint_bin16(i) uprintf("%016b", i)
+#define uprint_bin32(i) uprintf("%032lb", i)
+#define uprint_bin_reverse8(i) uprintf("%08b", bitrev(i))
+#define uprint_bin_reverse16(i) uprintf("%016b", bitrev16(i))
+#define uprint_bin_reverse32(i) uprintf("%032lb", bitrev32(i))
+/* print value utility */
+#define uprint_val_dec(v) uprintf(#v ": %u\n", v)
+#define uprint_val_decs(v) uprintf(#v ": %d\n", v)
+#define uprint_val_hex8(v) uprintf(#v ": %X\n", v)
+#define uprint_val_hex16(v) uprintf(#v ": %02X\n", v)
+#define uprint_val_hex32(v) uprintf(#v ": %04lX\n", v)
+#define uprint_val_bin8(v) uprintf(#v ": %08b\n", v)
+#define uprint_val_bin16(v) uprintf(#v ": %016b\n", v)
+#define uprint_val_bin32(v) uprintf(#v ": %032lb\n", v)
+#define uprint_val_bin_reverse8(v) uprintf(#v ": %08b\n", bitrev(v))
+#define uprint_val_bin_reverse16(v) uprintf(#v ": %016b\n", bitrev16(v))
+#define uprint_val_bin_reverse32(v) uprintf(#v ": %032lb\n", bitrev32(v))
+
#else /* NO_PRINT */
#define xprintf(fmt, ...)
#define pbin_reverse(data) print_bin_reverse8(data)
#define pbin_reverse16(data) print_bin_reverse16(data)
-
#endif
#include "led.h"
#endif
+#ifdef NKRO_ENABLE
+ #include "keycode_config.h"
+
+ extern keymap_config_t keymap_config;
+#endif
+
/* ---------------------------------------------------------
* Global interface variables and declarations
* ---------------------------------------------------------
volatile uint16_t keyboard_idle_count = 0;
static virtual_timer_t keyboard_idle_timer;
static void keyboard_idle_timer_cb(void *arg);
-#ifdef NKRO_ENABLE
-extern bool keyboard_nkro;
-#endif /* NKRO_ENABLE */
report_keyboard_t keyboard_report_sent = {{0}};
#ifdef MOUSE_ENABLE
if((usbp->setup[4] == KBD_INTERFACE) && (usbp->setup[5] == 0)) { /* wIndex */
keyboard_protocol = ((usbp->setup[2]) != 0x00); /* LSB(wValue) */
#ifdef NKRO_ENABLE
- keyboard_nkro = !!keyboard_protocol;
- if(!keyboard_nkro && keyboard_idle) {
+ keymap_config.nkro = !!keyboard_protocol;
+ if(!keymap_config.nkro && keyboard_idle) {
#else /* NKRO_ENABLE */
if(keyboard_idle) {
#endif /* NKRO_ENABLE */
keyboard_idle = usbp->setup[3]; /* MSB(wValue) */
/* arm the timer */
#ifdef NKRO_ENABLE
- if(!keyboard_nkro && keyboard_idle) {
+ if(!keymap_config.nkro && keyboard_idle) {
#else /* NKRO_ENABLE */
if(keyboard_idle) {
#endif /* NKRO_ENABLE */
}
#ifdef NKRO_ENABLE
- if(!keyboard_nkro && keyboard_idle) {
+ if(!keymap_config.nkro && keyboard_idle) {
#else /* NKRO_ENABLE */
if(keyboard_idle) {
#endif /* NKRO_ENABLE */
osalSysUnlock();
#ifdef NKRO_ENABLE
- if(keyboard_nkro) { /* NKRO protocol */
+ if(keymap_config.nkro) { /* NKRO protocol */
/* need to wait until the previous packet has made it through */
/* can rewrite this using the synchronous API, then would wait
* until *after* the packet has been transmitted. I think
-/*
+/*
* Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
* This file is based on:
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
# define MOUSE_INTERFACE (KEYBOARD_INTERFACE + 1)
#else
# define MOUSE_INTERFACE KEYBOARD_INTERFACE
-#endif
+#endif
#ifdef EXTRAKEY_ENABLE
# define EXTRAKEY_INTERFACE (MOUSE_INTERFACE + 1)
#else
# define EXTRAKEY_INTERFACE MOUSE_INTERFACE
-#endif
+#endif
#ifdef CONSOLE_ENABLE
# define CONSOLE_INTERFACE (EXTRAKEY_INTERFACE + 1)
#define KEYBOARD_IN_EPNUM 1
#ifdef MOUSE_ENABLE
-# define MOUSE_IN_EPNUM (KEYBOARD_IN_EPNUM + 1)
+# define MOUSE_IN_EPNUM (KEYBOARD_IN_EPNUM + 1)
#else
# define MOUSE_IN_EPNUM KEYBOARD_IN_EPNUM
#endif
#ifdef EXTRAKEY_ENABLE
# define EXTRAKEY_IN_EPNUM (MOUSE_IN_EPNUM + 1)
#else
-# define EXTRAKEY_IN_EPNUM MOUSE_IN_EPNUM
+# define EXTRAKEY_IN_EPNUM MOUSE_IN_EPNUM
#endif
#ifdef CONSOLE_ENABLE
#define MOUSE_EPSIZE 8
#define EXTRAKEY_EPSIZE 8
#define CONSOLE_EPSIZE 32
-#define NKRO_EPSIZE 16
+#define NKRO_EPSIZE 32
#define MIDI_STREAM_EPSIZE 64
#define CDC_NOTIFICATION_EPSIZE 8
#define CDC_EPSIZE 16
#include "descriptor.h"
#include "lufa.h"
+#ifdef NKRO_ENABLE
+ #include "keycode_config.h"
+
+ extern keymap_config_t keymap_config;
+#endif
+
+
#ifdef AUDIO_ENABLE
#include <audio.h>
#endif
/* Select the Keyboard Report Endpoint */
#ifdef NKRO_ENABLE
- if (keyboard_protocol && keyboard_nkro) {
+ if (keyboard_protocol && keymap_config.nkro) {
/* Report protocol - NKRO */
Endpoint_SelectEndpoint(NKRO_IN_EPNUM);
/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
* http://www.pjrc.com/teensy/usb_keyboard.html
* Copyright (c) 2009 PJRC.COM, LLC
- *
+ *
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
- *
+ *
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
- *
+ *
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
#include "action.h"
#include "action_util.h"
+#ifdef NKRO_ENABLE
+ #include "keycode_config.h"
+
+ extern keymap_config_t keymap_config;
+#endif
+
/**************************************************************************
*
}
/* TODO: should keep IDLE rate on each keyboard interface */
#ifdef NKRO_ENABLE
- if (!keyboard_nkro && keyboard_idle && (++div4 & 3) == 0) {
+ if (!keymap_config.nkro && keyboard_idle && (++div4 & 3) == 0) {
#else
if (keyboard_idle && (++div4 & 3) == 0) {
#endif
#endif
if (bmRequestType == 0x00 && wValue == DEVICE_REMOTE_WAKEUP) {
if (bRequest == SET_FEATURE) {
- remote_wakeup = true;
+ remote_wakeup = true;
} else {
remote_wakeup = false;
}
if (bRequest == HID_SET_PROTOCOL) {
keyboard_protocol = wValue;
#ifdef NKRO_ENABLE
- keyboard_nkro = !!keyboard_protocol;
+ keymap_config.nkro = !!keyboard_protocol;
#endif
clear_keyboard();
//usb_wait_in_ready();
#include "util.h"
#include "host.h"
+#ifdef NKRO_ENABLE
+ #include "keycode_config.h"
+
+ extern keymap_config_t keymap_config;
+#endif
+
// protocol setting from the host. We use exactly the same report
// either way, so this variable only stores the setting since we
int8_t result = 0;
#ifdef NKRO_ENABLE
- if (keyboard_nkro)
+ if (keymap_config.nkro)
result = send_report(report, KBD2_ENDPOINT, 0, KBD2_SIZE);
else
#endif
* Mouse key - Mouse control with keyboard
* System Control Key - Power Down, Sleep, Wake Up and USB Remote Wake up
* Media Control Key - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc
-* USB NKRO - 120 keys(+ 8 modifiers) simultaneously
+* USB NKRO - 240 keys(+ 8 modifiers) simultaneously
* PS/2 mouse support - PS/2 mouse(TrackPoint) as composite device
* Keyboard protocols - PS/2, ADB, M0110, Sun and other old keyboard protocols
* User Function - Customizable function of key with writing code
projects / qmk_firmware.git / commitdiff