+++ /dev/null
-\input texinfo @c -*-texinfo-*-
-@setfilename WINDOWS.info
-@settitle WINDOWS - compiling and installing GNU LilyPond on Windows
-
-@node Top
-@top
-
-@chapter WINDOWS - compiling and installing GNU LilyPond on Windows
-
-This document is a supplement to INSTALL.txt, you may want to read
-that too.
-
-@section Obtaining LilyPond
-
-You can get the latest version of LilyPond at
-@uref{ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/,
-ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/}.
-
-@section Windows build requirements
-You need the following packages to compile Lilypond on Windows.
-
-@table @code
-@item The GNU + Cygnus tools, 1.1.7 or newer.
-Check out the @uref{http://sources.redhat.com/cygwin,Cygwin webpage}.
-You can get the latest version of the GNU + Cygnus tools from cygnus
-@uref{http://sources.redhat.com/cygwin/mirrors.html,mirror site}.
-Install everything, including tetex.
-@item GUILE 1.4, or newer.
-Check out the @uref{http://www.gnu.org/software/guile.html,GUILE
-webpage}. You may need the patch @file{guile-1.4-gnu-windows.patch}
-included in LilyPond's source distribution.
-@end table
-
-@section Windows precompiled binaries
-
-@table @code
-@item LilyPond
-Click @uref{http://appel.lilypond.org/lilypond/gnu-windows/setup.exe,
-here} to install LilyPond, or visit @uref{http://appel.lilypond.org/lilypond/gnu-windows,
-LilyPond on Windows}.
-
-This will install the minimal set of cygwin tools needed to run
-LilyPond. If you already have cygwin installed, don't worry: nothing
-will be installed twice. To expand on this minimal set, click
-@uref{http://sources.redhat.com/cygwin/setup.exe,here},
-or visit a Cygwin
-@uref{http://sources.redhat.com/cygwin/mirrors.html,mirror site}.
-@end table
-
-Note that none of the developers uses Windows, of course. In fact, we
-recommend you to use GNU/Linux for running LilyPond. We provide these
-binaries anyway, because it saves us the trouble of helping Windows
-users trying to compile LilyPond themselves.
-
-These binaries are cross compiled for Windows on a GNU/Linux box. You
-may want to check out the
-@uref{http://appel.lilypond.org/lilypond/gnu-windows/cross-1.1.8.tar.gz,cross
-compilation scripts}.
-
-@section Windows running requirements
-
-GNU LilyPond does use a lot of resources. For operation you need the
-following software
-
-@table @code
-@item GUILE
-Included in binary installation.
-@item TeX
-A full TeX installation.
-Click
-@uref{http://prdownloads.sourceforge.net/miktex/miktex-2.0-lvl-1.zip,here}
-to install basic MiKTeX commands,
-or visit @uref{http://www.miktex.org,www.miktex.org}.
-@c See @file{/usr/doc/cygwin/tetex-beta-20001218.README} for details.
-@item PostScript tools
-@table @code
-@item GSView-2.6, or
-This old package has two advantages. It has gsview and ghostscript
-bundeled, and it doesn't popup @emph{Register Now|Cancel} windows all
-the time. It doesn't work together with Yap to display PostScript
-specials.
-
-Click @uref{ftp://ftp.cs.wisc.edu/ghost/ghostgum/gsv26w32.exe,here} to
-install GSView-2.6 (GhostView for Windows), or visit
-@uref{ftp://ftp.cs.wisc.edu/ghost/ghostgum,ftp.cs.wisc.edu}.
-
-@item GSView-3.6 and GhostScript-6.50
-If you install both these packages, Yap will display PostScript
-specials. You get annoying @emph{Register Now|Cancel} popups, though.
-
-Click @uref{ftp://ftp.cs.wisc.edu/ghost/ghostgum/gsv36w32.exe,here} for
-GSview and
-Click @uref{ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/AFPL/gs650/gs650w32.exe
-,here} for GhostScript.
-@uref{ftp://ftp.cs.wisc.edu/ghost/ghostgum,ftp.cs.wisc.edu}.
-or visit the
-@uref{http://www.cs.wisc.edu/~ghost/,Ghostscript, Ghostview and GSview site}.
-@end table
-
-@item Python
-Click @uref{http://www.python.org/ftp/python/win32/py152.exe,here} to
-install Python-1.5.2, or visit
-@uref{http://www.python.org,www.python.org}.
-
-Python > 1.5.2 has ugly licensing issues, so we only used and tested
-1.5.2.
-@end table
-
-
-@section Windows running setup
-
-If you're lucky, after running @file{setup.exe} you're all set up.
-
-Open a LilyPond shell (or any bash shell), and type
-@example
-lilypond --help
-@end example
-
-If you don't see something similar to
-@example
-Usage: lilypond [OPTION]... [FILE]...
-
-Typeset music and or play MIDI from FILE
-
-LilyPond is a music typesetter. It produces beautiful sheet music
-using a high level description file as input. LilyPond is part of
-the GNU Project.
-
-Options:
- -h,--help this help
-[..]
-@end example
-
-you should try adding @file{/usr/lilypond-x.y.z/bin} to your @var{PATH},
-do:
-@example
-PATH=/usr/lilypond-1.3.147/bin:$PATH
-@end example
-
-and try again.
-
-[TODO:
-
-* politely ask windows users not to complain but rather send instructive
-bug reports along with patches.
-
-* emacs-mode installation, figure out and describe proper
-emacs-on-cygwin setup.
-
-* talk about /etc/profile.d/lilypond-profile.sh
-
-* GUILE errors, simple guile test
-
-* (La)TEX errors, simple tex test
-
-
-]
-@ignore
-
- guile -v
- Guile 1.4.1
-
- guile -e %load-path
- ERROR: Wrong type to apply: ("/usr/share/guile/site" /usr/share/guile/1.4.1")
-
-
-
-Mats?
-
-Let's take this step by step.
-
-It should not be critical which MikTeX version you use.
-Let's first verify that your MikTeX works as it should.
-Open a DOS window. Run the commands
->> latex sample2e
- Should produce some lines of output
->> yap sample2e
- Should display a three page document.
-
-Next step; verify that the geometry package is in place.
-Save the attached file to the directory where you run
-your DOS window. Run the commands
->> latex geometrytest
->> yap geometrytest
-This one you should get a single page document with some text
-in each corner.
-]
-
-@end ignore
-
-
+++ /dev/null
-#!/bin/bash
-# /etc/profile.d/lily-tex.sh -- Check for TeX or try to setup MiKTeX
-
-texmf='//c/Program Files/MiKTeX'
-texmf_bin='//c/Program Files/MiKTeX/miktex'
-
-if [ ! -e /usr/share/texmf ]; then
- echo /usr/share/texmf not found
- if [ -e "$texmf" ]; then
- ln -s "$texmf" /usr/share/texmf
- echo MiKTeX found: linked to "$texmf"
- else
- echo setup /usr/share/texmf yourself
- fi
-fi
-if type -p tex; then
- echo no TeX in PATH
- if [ -e "$texmf_bin" ]; then
- echo MiKTeX found: added "$texmf_bin" to PATH
- PATH=`cygpath -u "$texmf/miktex"`:"$PATH"
- fi
-fi
-
+++ /dev/null
-#!/bin/bash
-# /etc/profile.d/lilypond-profile.z.sh -- profile additions for Windows
-# run after lilypond-profile.sh
-
-POSIX_GS_LIB="$(cygpath -apu $GS_LIB)"
-WINDOWS_GS_LIB="$(cygpath -apw $POSIX_GS_LIB)"
-
-POSIX_GS_FONTPATH="$(cygpath -apu $GS_FONTPATH)"
-WINDOWS_GS_FONTPATH="$(cygpath -apw $POSIX_GS_FONTPATH)"
-
-POSIX_TEXINPUTS="$(cygpath -apu $TEXINPUTS)"
-WINDOWS_TEXINPUTS="$(cygpath -apw $POSIX_TEXINPUTS)"
-
-POSIX_TFMFONTS="$(cygpath -apu $TFMFONTS)"
-WINDOWS_TFMFONTS="$(cygpath -apw $POSIX_TFMFONTS)"
-
-POSIX_MFINPUTS="$(cygpath -apu $MFINPUTS)"
-WINDOWS_MFINPUTS="$(cygpath -apw $POSIX_MFINPUTS)"
-
-# we assume running dos-based TeX, ie, MiKTeX
-# maybe move to /etc/profile.d/lily-tex.sh
-TEXINPUTS="$WINDOWS_TEXINPUTS"
-# TFMFONTS="$WINDOWS_TFMFONTS"
-
-rm -f /usr/lilypond
-# ugh
-# ln -s /usr/lilypond-@TOPLEVEL_VERSION@ /usr/lilypond
-lily=$(ls -utrd1 /usr/lilypond-* | tail -1)
-ln -s $lily /usr/lilypond
-
-PATH="/usr/lilypond/bin:$PATH"
-PATH="$lily/bin:$PATH"
-
-# gsv-2.7-gs-5.50
-PATH="//c/gstools/gsview://c/gstools/gs:$PATH"
-
-# gsv-3.6-gs-6.50
-PATH="//c/Ghostgum/gsview://c/gstools/gs:$PATH"
-
-# python-1.5.2
-PATH="//c/Program Files/Python:$PATH"
-PATH="//c/Program Files/MiKTeX/miktex:$PATH"
-
+++ /dev/null
-#!/bin/bash
-# ly2dvi.sh -- ly2dvi wrapper for Windows
-
-if echo | python - >/dev/null 2>&1; then
- echo
-else
- cat <<EOF
-Python not found. Install python-1.5.2 from www.python.org.
-Make sure python.exe in in your PATH
-EOF
- exit 1
-fi
-python $(cygpath -w /usr/lilypond/bin/ly2dvi.py) $*
+++ /dev/null
-\version "1.3.146"
-%{
-do a memory stress test.
-%}
-
-
-bla = \notes {
- c1(((( c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break c1 \break ))))c1}
-
-\score { \context Score <
- \bla \bla \bla \bla \bla \bla \bla
- >
- \paper { Gourlay_maxmeaures = 2. }
-}
-
-
+++ /dev/null
-\version "1.3.146"
-\score{
- \context Staff \notes\relative c''{
- \property Staff.instrument = "Toeters"
- c c c c(\break
- )c c c c ~\break
- c c c c\break
- }
- \paper{
- linewidth=60.0\mm
-% \translator { \HaraKiriStaffContext }
- \translator { \OrchestralScoreContext }
- \translator {
- \StaffContext
- \consists "Instrument_name_engraver"
- marginHangOnClef = 1
- }
- }
-}
-
-
-
+++ /dev/null
-
-% lines preceded by a percent sign are comments.
-\include "paper16.ly"
-\score {
- \notes
- \relative c''
- \sequential {
- \key g \major
- \time 3/4
-
- \repeat "volta" 2 \sequential {
- d4 g,8 a b c d4 g, g |
- e'4 c8 d e fis g4 g, g |
- c4 d8( )c b a( )b4 c8 b a g |
- a4 [b8 a] [g fis] g2. |
- }
-
- b'4 g8 a b g
- a4 d,8 e fis d |
- g4 e8 fis g d cis4 b8 cis a4 |
- a8-. b-. cis-. d-. e-. fis-.
- g4 fis e |
- fis a, r8 cis8
- d2.-\fermata
- \bar "|."
- }
- \paper {
- linewidth = 10.0 \cm % standard settings are too wide for a book
- }
-}
+++ /dev/null
-%!PS-Adobe-1.0: lily.ps
-%
-% Functions for direct and embedded PostScript
-
-% round cappings
-1 setlinecap
-
-/euclidean_length
-{
- 1 copy mul exch 1 copy mul add sqrt
-} bind def
-
-/draw_beam % width slope thick
-{
- 2 div /beam_thick exch def
- /beam_slope exch def
- /beam_wd exch def
- beam_slope beam_wd mul /beam_ht exch def
- 0 beam_thick neg moveto
- beam_wd beam_ht rlineto
- 0 beam_thick 2 mul rlineto
- 0 beam_thick lineto
- closepath fill
-} bind def
-
-/draw_repeat_slash % width slope thick
-{
- /beamthick exch def
- /slope exch def
- /width exch def
- beamthick beamthick slope div euclidean_length
- /xwid exch def
- 0 0 moveto
- xwid 0 rlineto
- width slope width mul rlineto
- xwid neg 0 rlineto
-% width neg width angle sin mul neg rlineto
- closepath fill
-} bind def
-
-/draw_hairpin % width start_h end_h thick
-{
- setlinewidth
- /end_h exch def
- /start_h exch def
- /wid exch def
- 0 start_h moveto
- wid end_h lineto
- stroke
- 0 start_h neg moveto
- wid end_h neg lineto
- stroke
-} bind def
-
-/draw_tuplet % height gap dx dy thick dir
-{
- /dir exch def
- setlinewidth
- 1 setlinecap
- 1 setlinejoin
- /tuplet_dy exch def
- /tuplet_dx exch def
- /tuplet_gapx exch def
- /tuplet_h exch def
- tuplet_dy tuplet_dx div tuplet_gapx mul /tuplet_gapy exch def
-
-
- 0 0 moveto
- 0 tuplet_h dir mul lineto
- tuplet_dx tuplet_gapx sub 2 div
- tuplet_dy tuplet_gapy sub 2 div tuplet_h dir mul add lineto
- tuplet_dx tuplet_gapx add 2 div
- tuplet_dy tuplet_gapy add 2 div tuplet_h dir mul add moveto
- tuplet_dx tuplet_dy tuplet_h dir mul add lineto
- tuplet_dx tuplet_dy lineto
- stroke
-} bind def
-
-/difficult_draw_ez_ball % ch letter_col ball_col font
-{
- % font
- findfont 0.7 scalefont setfont
- 0.1 setlinewidth
- 0 0 moveto
- 0 setgray
- 0.5 0 0.5 0 360 arc closepath fill stroke
- % ball_col
- 1 eq {
- 0.01 setlinewidth
- 1 setgray
- 0.5 0 0.4 0 360 arc closepath
- fill stroke
- } if
- % letter_col
- setgray
- % 0.25 is empiric centering. Change to taste
- 0.25 -0.25 moveto
- % ch
- show
-} bind def
-
-% Simple, but does it work everywhere?
-% The filled circles are drawn by setting the linewidth
-% to 2*radius and drawing a point. Is that (defined to be)
-% a nice filled circle?
-/draw_ez_ball % ch letter_col ball_col font
-{
- % font
- findfont 0.85 scalefont setfont
- /origin { 0.45 0 } def
- 0 setgray
- 1.1 setlinewidth
- origin moveto
- origin lineto stroke
- % ball_col
- setgray
- 0.9 setlinewidth
- origin moveto
- origin lineto stroke
- % letter_col
- setgray
- % 0.25 is empiric centering. Change to taste
- origin moveto
- -0.28 -0.30 rmoveto
- % ch
- show
-} bind def
-
-/draw_volta % h w thick vert_start vert_end
-{
- /vert_end exch def
- /vert_start exch def
- setlinewidth
- /volta_w exch def
- /volta_h exch def
- 1 setlinecap
- 1 setlinejoin
- vert_start 0 eq {
- 0 0 moveto
- 0 volta_h lineto
- } if
- 0 volta_h moveto
- volta_w volta_h lineto
- vert_end 0 eq {
- volta_w 0 lineto
- } if
- stroke
-} bind def
-
-% this is for drawing slurs.
-/draw_bezier_sandwich % thickness controls
-{
- setlinewidth
- moveto
- curveto
- lineto
- curveto
- gsave
- fill
- grestore
- stroke
-} bind def
-
-/draw_dashed_line % dash thickness dx dy
-{
- 1 setlinecap
- 1 setlinejoin
- setdash
- setlinewidth
- 0 0 moveto
- lineto
- stroke
-} bind def
-
-/draw_dashed_slur % dash thickness controls
-{
- 1 setlinecap
- 1 setlinejoin
- setdash
- setlinewidth
- 8 -2 roll
- moveto
- curveto
- stroke
-} bind def
-
-
-
-/bracket_traject
-{
- /traject_ds exch def
- /traject_alpha exch def
- traject_ds traject_alpha sin mul add
- exch
- traject_ds traject_alpha cos mul add
- exch
-} bind def
-
-
-
-/half_bracket
-{
-%6
- 0 0
-%5a
- bracket_thick arch_height add half_height arch_thick sub arch_width add
- arch_angle arch_height -0.15 mul bracket_traject
-%5b
- bracket_thick 0.5 mul half_height
- 0 arch_height 0.5 mul bracket_traject
-%5c
- 0 half_height
-%4a
- bracket_thick half_height arch_thick sub
- 0 arch_height 0.4 mul bracket_traject
-%4b
- bracket_thick arch_height add half_height arch_thick sub arch_width add
- arch_angle arch_height -0.25 mul bracket_traject
-%4c
- bracket_thick arch_height add half_height arch_thick sub arch_width add
-%3
- bracket_thick half_height arch_thick sub
-%2
- bracket_thick 0
-%1
- 0 0
-} bind def
-
-/draw_half_bracket {
- moveto
- lineto
- lineto
- curveto
- curveto
- lineto
- gsave
- fill
- grestore
-} bind def
-
-/draw_bracket % arch_angle arch_width arch_height bracket_height arch_thick bracket_thick
-{
- % urg
-
- /bracket_thick exch def
- /arch_thick exch def
- /bracket_height exch def
- /arch_height exch def
- /arch_width exch def
- /arch_angle exch def
-
- bracket_height 2 div bracket_thick add /half_height exch def
- bracket_thick 0.5 mul setlinewidth
- 1 setlinecap
- 1 setlinejoin
- half_bracket
- 20 copy
- 1 -1 scale
- draw_half_bracket
- stroke
- 1 -1 scale
- draw_half_bracket
- stroke
-} bind def
-
projects / lilypond.git / commitdiff