Delete FUSE.txt

diff --git a/docs/FUSE.txt b/docs/FUSE.txt
deleted file mode 100644 (file)
index 99ddd2d..0000000
--- a/docs/FUSE.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Atmega32u4 Fuse/Lock Bits for Planck/Atomic/Preonic
-=========================
-
-       Low Fuse: 0x5E
-       High Fuse: 0x99
-       Extended Fuse: 0xF3
-       Lock Byte: 0xFF
-
-
-ATMega168P Fuse/Lock Bits
-=========================
-This configuration is from usbasploader's Makefile.
-
-    HFUSE   0xD6
-    LFUSE   0xDF
-    EFUSE   0x00
-    LOCK    0x3F(intact)
-
-#---------------------------------------------------------------------
-# ATMega168P
-#---------------------------------------------------------------------
-# Fuse extended byte:
-# 0x00 = 0 0 0 0   0 0 0 0 <-- BOOTRST (boot reset vector at 0x1800)
-#                    \+/
-#                     +------- BOOTSZ (00 = 2k bytes)
-# Fuse high byte:
-# 0xd6 = 1 1 0 1   0 1 1 0
-#        ^ ^ ^ ^   ^ \-+-/
-#        | | | |   |   +------ BODLEVEL 0..2 (110 = 1.8 V)
-#        | | | |   + --------- EESAVE (preserve EEPROM over chip erase)
-#        | | | +-------------- WDTON (if 0: watchdog always on)
-#        | | +---------------- SPIEN (allow serial programming)
-#        | +------------------ DWEN (debug wire enable)
-#        +-------------------- RSTDISBL (reset pin is enabled)
-# Fuse low byte:
-# 0xdf = 1 1 0 1   1 1 1 1
-#        ^ ^ \ /   \--+--/
-#        | |  |       +------- CKSEL 3..0 (external >8M crystal)
-#        | |  +--------------- SUT 1..0 (crystal osc, BOD enabled)
-#        | +------------------ CKOUT (if 0: Clock output enabled)
-#        +-------------------- CKDIV8 (if 0: divide by 8)
-
-
-# Lock Bits
-# 0x3f = - - 1 1   1 1 1 1
-#            \ /   \-/ \-/
-#             |     |   +----- LB 2..1 (No memory lock features enabled)
-#             |     +--------- BLB0 2..1 (No restrictions for SPM or LPM accessing the Application section)
-#             +--------------- BLB1 2..1 (No restrictions for SPM or LPM accessing the Boot Loader section)
-