--- /dev/null
+/*
+Copyright 2018 Ayden <aydenvis@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xCEEB
+#define PRODUCT_ID 0x1256
+#define DEVICE_VER 0x0100
+#define MANUFACTURER AYDENandDAD Youtube
+#define PRODUCT QWERTYYdox
+#define DESCRIPTION Split 45 percent ergonomic keyboard with two Y keys
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
+
+// wiring of each half
+#define MATRIX_ROW_PINS { B6, B2, B3, B1 }
+#define MATRIX_COL_PINS { F7, F6, F5, C6, D7, D4, D1 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define BACKLIGHT_PIN E6
+#define BACKLIGHT_LEVELS 5
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D6
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 12 // Number of LEDs
+#define ws2812_PORTREG PORTD
+#define ws2812_DDRREG DDRD
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- /dev/null
+{
+ "keyboard_name": "QWERTYYdox",
+ "manufacturer": "aydenvis",
+ "identifier": "0x1256",
+ "url": "",
+ "maintainer": "qmk",
+ "processor": "atmega32u4",
+ "width": 14,
+ "height": 4,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 53,
+ "layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.25}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.5}, {"label":"R00", "x":9, "y":0.5}, {"label":"R01", "x":10, "y":0.25}, {"label":"R02", "x":11, "y":0.125}, {"label":"R03", "x":12, "y":0}, {"label":"R04", "x":13, "y":0.125}, {"label":"R05", "x":14, "y":0.25}, {"label":"R06", "x":15, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.25}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.5}, {"label":"R10", "x":9, "y":1.5}, {"label":"R11", "x":10, "y":1.25}, {"label":"R12", "x":11, "y":1.125}, {"label":"R13", "x":12, "y":1}, {"label":"R14", "x":13, "y":1.125}, {"label":"R15", "x":14, "y":1.25}, {"label":"R16", "x":15, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.25}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6.5, "y":3}, {"label":"R20", "x":8.5, "y":3}, {"label":"R21", "x":10, "y":2.25}, {"label":"R22", "x":11, "y":2.125}, {"label":"R23", "x":12, "y":2}, {"label":"R24", "x":13, "y":2.125}, {"label":"R25", "x":14, "y":2.25}, {"label":"R26", "x":15, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.25}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":5.5, "y":4}, {"label":"L35", "x":6.5, "y":4}, {"label":"R30", "x":8.5, "y":4}, {"label":"R31", "x":9.5, "y":4}, {"label":"R32", "x":12, "y":3}, {"label":"R33", "x":13, "y":3.125}, {"label":"R34", "x":14, "y":3.25}, {"label":"R35", "x":15, "y":3.375}]
+ }
+ }
+}
--- /dev/null
+/*
+Copyright 2018 Ayden <aydenvis@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+// #define MASTER_LEFT
+#define MASTER_RIGHT
+// #define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#define MOUSEKEY_DELAY 150
+#define MOUSEKEY_INTERVAL 20
+#define MOUSEKEY_MAX_SPEED 10
+#define MOUSEKEY_TIME_TO_MAX 10
+#define MOUSEKEY_WHEEL_MAX_SPEED 8
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 40
\ No newline at end of file
--- /dev/null
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _NUM 1
+#define _NAV 2
+enum custom_keycodes {
+ qwerty = SAFE_RANGE,
+ nav,
+ num,
+ EQL
+};
+
+// #define KC_ KC_TRNS
+#define __ KC_NO
+#define NAV TO(2)
+#define NUM TO(1)
+#define ALPHA TO(0)
+#define NPLUS KC_KP_PLUS
+#define NMINUS KC_KP_MINUS
+#define NSTAR KC_KP_ASTERISK
+#define NSLASH KC_KP_SLASH
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_QWERTY] = LAYOUT(
+ //,--------+--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------+--------.
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
+ //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS,
+ //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
+ KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, __, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC,
+ //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
+ KC_LCTL, KC_LGUI, KC_LALT, qwerty, KC_ENT, KC_DEL, NUM, NAV, KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL
+ //`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------'
+ ),
+
+ [_NUM] = LAYOUT(
+ //,--------+--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------+--------.
+ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NO,
+ //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO,
+ //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
+ KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, __, KC_NO, KC_PPLS, KC_PMNS, EQL, KC_PAST, KC_PSLS,
+ //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
+ KC_LCTL, KC_ESC, KC_NO, num, KC_ENT, KC_LSFT, NAV, ALPHA, KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL
+ //`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------'
+ ),
+
+ [_NAV] = LAYOUT(
+ //,--------+--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------+--------.
+ KC_ESC, KC_NO, KC_ACL0, KC_ACL1, KC_ACL2, KC_WH_L, KC_WH_R, KC_ESC, KC_NO, KC_UP, NSLASH, NSTAR, NMINUS, NPLUS,
+ //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
+ KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_WH_U, KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_NO,
+ //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
+ KC_INS, KC_HOME, KC_PGUP, KC_BTN1, KC_BTN2, KC_WH_D, __, KC_MS_L, KC_MS_U, KC_MS_D, KC_MS_R, KC_NO, KC_NO,
+ //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
+ KC_DEL, KC_END, KC_PGDN, nav, KC_LCTL, KC_SPC, ALPHA, NUM, KC_LSFT, KC_BSPC, KC_NO, KC_NO, KC_NO, RESET
+ //`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------'
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ if (record->event.pressed) {
+ switch(keycode) {
+ case qwerty:
+ SEND_STRING("-QWERTY");
+ return false;
+ case nav:
+ SEND_STRING("-NAV"); // selects all and copies
+ return false;
+ case num:
+ SEND_STRING("-NUM"); // selects all and copies
+ return false;
+ case EQL:
+ SEND_STRING("="); // selects all and copies
+ return false;
+ }
+ }
+ return true;
+};
--- /dev/null
+#include "qwertyydox.h"
--- /dev/null
+#ifndef QWERTYYDOX_H
+#define QWERTYYDOX_H
+
+#ifdef KEYBOARD_qwertyydox_rev1
+ #include "rev1.h"
+#endif
+
+#include "quantum.h"
+
+// Used to create a keymap using only KC_ prefixed keys
+#define LAYOUT_kc( \
+ L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+ L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+ L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+ ) \
+ LAYOUT( \
+ KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
+ KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
+ KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
+ KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
+ )
+
+#endif
\ No newline at end of file
--- /dev/null
+QWERTYYdox
+====
+
+
+
+
+A split ergo 4x7 keyboard with 3 thumb keys and 2 Y keys.
+
+**Status** The QWERTYYdox is a personal project, however it is completely functional.
+
+Keyboard Maintainer: /u/aydenvis
+
+Hardware Supported: Pro Micro (ATmega32U4)
+
+Hardware Availability: The whole thing is handwired with plates cut by [/u/JOlimon](stratakb.com)
+
+
+Make example for this keyboard (after setting up your build environment):
+
+ make qwertyydox/rev1:default
+
+Example of flashing this keyboard:
+
+ make qwertyydox/rev1:default:avrdude
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
--- /dev/null
+/*
+Copyright 2018 Ayden <aydenvis@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+#include QMK_KEYBOARD_CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xCEEB
+#define PRODUCT_ID 0x1256
+#define DEVICE_VER 0x0100
+#define MANUFACTURER AYDENandDAD
+#define PRODUCT QWERTYdox Keyboard
+#define DESCRIPTION Split 40 percent keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
+
+// wiring of each half
+#define MATRIX_ROW_PINS { B6, B2, B3, B1 }
+#define MATRIX_COL_PINS { F7, F6, F5, C6, D7, D4, D1 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define BACKLIGHT_PIN E6
+#define BACKLIGHT_LEVELS 5
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D6
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 12 // Number of LEDs
+#define ws2812_PORTREG PORTD
+#define ws2812_DDRREG DDRD
+
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- /dev/null
+#include "rev1.h"
+
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+ led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+
+ // // green led on
+ // DDRD |= (1<<5);
+ // PORTD &= ~(1<<5);
+
+ // // orange led on
+ // DDRB |= (1<<0);
+ // PORTB &= ~(1<<0);
+
+ matrix_init_user();
+};
--- /dev/null
+#ifndef REV1_H
+#define REV1_H
+
+#include "qwertyydox.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, R16, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, R26, \
+ L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05, L06 }, \
+ { L10, L11, L12, L13, L14, L15, KC_NO }, \
+ { L20, L21, L22, L23, L24, L25, KC_NO }, \
+ { L30, L31, L32, L33, L34, L35, L36 }, \
+ { R06, R05, R04, R03, R02, R01, R00 }, \
+ { R16, R15, R14, R13, R12, R11, R10 }, \
+ { R26, R25, R24, R23, R22, R21, R20, }, \
+ { R36, R35, R34, R33, R32, R31, R30 } \
+ }
+
+#endif
--- /dev/null
+BACKLIGHT_ENABLE = no
--- /dev/null
+# MCU name\r
+#MCU = at90usb1287\r
+MCU = atmega32u4\r
+\r
+# Processor frequency.\r
+# This will define a symbol, F_CPU, in all source code files equal to the\r
+# processor frequency in Hz. You can then use this symbol in your source code to\r
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
+# automatically to create a 32-bit value in your source code.\r
+#\r
+# This will be an integer division of F_USB below, as it is sourced by\r
+# F_USB after it has run through any CPU prescalers. Note that this value\r
+# does not *change* the processor frequency - it should merely be updated to\r
+# reflect the processor speed set externally so that the code can use accurate\r
+# software delays.\r
+F_CPU = 16000000\r
+\r
+#\r
+# LUFA specific\r
+#\r
+# Target architecture (see library "Board Types" documentation).\r
+ARCH = AVR8\r
+\r
+# Input clock frequency.\r
+# This will define a symbol, F_USB, in all source code files equal to the\r
+# input clock frequency (before any prescaling is performed) in Hz. This value may\r
+# differ from F_CPU if prescaling is used on the latter, and is required as the\r
+# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
+# at the end, this will be done automatically to create a 32-bit value in your\r
+# source code.\r
+#\r
+# If no clock division is performed on the input clock inside the AVR (via the\r
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.\r
+F_USB = $(F_CPU)\r
+\r
+# Bootloader\r
+# This definition is optional, and if your keyboard supports multiple bootloaders of\r
+# different sizes, comment this out, and the correct address will be loaded \r
+# automatically (+60). See bootloader.mk for all options.\r
+BOOTLOADER = caterina\r
+\r
+# Interrupt driven control endpoint task(+60)\r
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT\r
+\r
+# Build Options\r
+# change to "no" to disable the options, or define them in the Makefile in\r
+# the appropriate keymap folder that will get included automatically\r
+#\r
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)\r
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)\r
+EXTRAKEY_ENABLE = no # Audio control and System control(+450)\r
+CONSOLE_ENABLE = no # Console for debug(+400)\r
+COMMAND_ENABLE = no # Commands for debug and configuration\r
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work\r
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality\r
+MIDI_ENABLE = no # MIDI controls\r
+AUDIO_ENABLE = no # Audio output on port C6\r
+UNICODE_ENABLE = no # Unicode\r
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID\r
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.\r
+SUBPROJECT_rev1 = yes\r
+USE_I2C = yes # I2C is used between the sides\r
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE\r
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend\r
+\r
+SPLIT_KEYBOARD = yes\r
+\r
+DEFAULT_FOLDER = qwertyydox/rev1\r
projects / qmk_firmware.git / commitdiff