--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+#endif
--- /dev/null
+{
+ "keyboard_name": "Let's Split",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 13,
+ "height": 4,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}]
+ }
+ }
+}
--- /dev/null
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#endif
--- /dev/null
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _NUMPAD 1
+#define _RAISE 4
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ NUMPAD,
+ RAISE
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/*
+ * ,-----------------------------------------------------------.
+ * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
+ * |-----------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |
+ * |-----------------------------------------------------------|
+ * |FN | A| S| D| F| G| H| J| K| L| ;| '|Return |
+ * |-----------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift |
+ * |-----------------------------------------------------------|
+ * |Ctrl|Gui |Alt | NUM | Space | Space |Alt |FN |Menu |Ctrl |
+ * `-----------------------------------------------------------'
+ */
+ /* Layer 0: Qwerty */
+ [_QWERTY] = LAYOUT_split60( \
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ RAISE, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
+ KC_LCTL, KC_LGUI, KC_LALT, NUMPAD, KC_SPC, KC_SPC, KC_RALT, RAISE, KC_MENU, KC_RCTL \
+ ),
+
+/*
+ * ,-----------------------------------------------------------.
+ * | | | | | | | | | /| *| -| | | |
+ * |-----------------------------------------------------------|
+ * | | | | | | | | 7| 8| 9| +| | | |
+ * |-----------------------------------------------------------|
+ * | | | | | | | | 4| 5| 6|Bspc| |Return |
+ * |-----------------------------------------------------------|
+ * | | | | | | | | 1| 2| 3| .| |
+ * |-----------------------------------------------------------|
+ * | | | | QWE | | 0 | . | | | |
+ * `-----------------------------------------------------------'
+ */
+
+ /* Layer 1: Numpad */
+ [_NUMPAD] = LAYOUT_split60( \
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_PSLS, KC_PAST, KC_MINUS, _______, _______, KC_BSPC, \
+ _______, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, KC_PLUS, _______, _______, KC_BSLS, \
+ _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, KC_BSPC, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, KC_1, KC_2, KC_3, KC_DOT, _______, \
+ _______, _______, _______, QWERTY, KC_SPC, KC_0, KC_DOT, RAISE, _______, _______ \
+ ),
+
+/*
+ * ,-----------------------------------------------------------.
+ * | | | | | | | | | | | | | | |
+ * |-----------------------------------------------------------|
+ * | | | ^ | | | | |pUp| ^ |pDn| | | | |
+ * |-----------------------------------------------------------|
+ * | | < | v | > | | |Hom| < | v | > | | | |
+ * |-----------------------------------------------------------|
+ * | | | | | | |End| | | | | |
+ * |-----------------------------------------------------------|
+ * | | | | | | | | | | |
+ * `-----------------------------------------------------------'
+ */
+
+ /* Layer 2: RAISE */
+ [_RAISE] = LAYOUT_split60( \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+ )
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float tone_numpad[][2] = SONG(DVORAK_SOUND);
+#endif
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_qwerty);
+ #endif
+ default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case NUMPAD:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_numpad);
+ #endif
+ default_layer_set(1UL<<_NUMPAD);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ } else {
+ layer_off(_RAISE);
+ }
+ return false;
+ break;
+ }
+ return true;
+}
--- /dev/null
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+#include "lets_split.h"
--- /dev/null
+#ifndef LETS_SPLIT_H
+#define LETS_SPLIT_H
+
+#include "quantum.h"
+
+#ifdef KEYBOARD_lets_split_rev1
+ #include "rev1.h"
+#endif
+
+
+// Used to create a keymap using only KC_ prefixed keys
+#define LAYOUT_kc( \
+ L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \
+ L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \
+ L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27, \
+ L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37, \
+ L40, L41, L42, L43, L44, L45, L46, L47, R40, R41, R42, R43, R44, R45, R46, R47 \
+ ) \
+ LAYOUT( \
+ KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##L07, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, KC_##R07,\
+ KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##L17, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, KC_##R17,\
+ KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##L27, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, KC_##R27,\
+ KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##L37, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, KC_##R36, KC_##R37 \
+ )
+
+#define LAYOUT_XEAL LAYOUT_kc
+
+#endif
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+#include "timer.h"
+
+#ifdef USE_I2C
+# include "i2c.h"
+#else // USE_SERIAL
+# include "serial.h"
+#endif
+
+#ifndef DEBOUNCING_DELAY
+# define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+ static uint16_t debouncing_time;
+ static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+# define print_matrix_header() print("\nr/c 01234567\n")
+# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
+# define matrix_bitpop(i) bitpop(matrix[i])
+# define ROW_SHIFTER ((uint8_t)1)
+#else
+# error "Currently only supports 8 COLS"
+#endif
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#define ERROR_DISCONNECT_COUNT 5
+
+#define ROWS_PER_HAND (MATRIX_ROWS/2)
+
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#if (DIODE_DIRECTION == COL2ROW)
+ static void init_cols(void);
+ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+ static void unselect_rows(void);
+ static void select_row(uint8_t row);
+ static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+ static void init_rows(void);
+ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+ static void unselect_cols(void);
+ static void unselect_col(uint8_t col);
+ static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_slave_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+#ifdef DISABLE_JTAG
+ // JTAG disable for PORT F. write JTD bit twice within four cycles.
+ MCUCR |= (1<<JTD);
+ MCUCR |= (1<<JTD);
+#endif
+
+ debug_enable = true;
+ debug_matrix = true;
+ debug_mouse = true;
+ // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+ unselect_rows();
+ init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+ unselect_cols();
+ init_rows();
+#endif
+
+ TX_RX_LED_INIT;
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+
+ matrix_init_quantum();
+
+}
+
+uint8_t _matrix_scan(void)
+{
+ int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+#if (DIODE_DIRECTION == COL2ROW)
+ // Set row, read cols
+ for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
+# if (DEBOUNCING_DELAY > 0)
+ bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
+
+ if (matrix_changed) {
+ debouncing = true;
+ debouncing_time = timer_read();
+ }
+
+# else
+ read_cols_on_row(matrix+offset, current_row);
+# endif
+
+ }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+ // Set col, read rows
+ for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+# if (DEBOUNCING_DELAY > 0)
+ bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
+ if (matrix_changed) {
+ debouncing = true;
+ debouncing_time = timer_read();
+ }
+# else
+ read_rows_on_col(matrix+offset, current_col);
+# endif
+
+ }
+#endif
+
+# if (DEBOUNCING_DELAY > 0)
+ if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+ for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+ matrix[i+offset] = matrix_debouncing[i+offset];
+ }
+ debouncing = false;
+ }
+# endif
+
+ return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+ int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+ int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+ if (err) goto i2c_error;
+
+ // start of matrix stored at 0x00
+ err = i2c_master_write(0x00);
+ if (err) goto i2c_error;
+
+ // Start read
+ err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+ if (err) goto i2c_error;
+
+ if (!err) {
+ int i;
+ for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+ matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
+ }
+ matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
+ i2c_master_stop();
+ } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+ i2c_reset_state();
+ return err;
+ }
+
+ return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+ int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+ if (serial_update_buffers()) {
+ return 1;
+ }
+
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ matrix[slaveOffset+i] = serial_slave_buffer[i];
+ }
+ return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+ uint8_t ret = _matrix_scan();
+
+#ifdef USE_I2C
+ if( i2c_transaction() ) {
+#else // USE_SERIAL
+ if( serial_transaction() ) {
+#endif
+ // turn on the indicator led when halves are disconnected
+ TXLED1;
+
+ error_count++;
+
+ if (error_count > ERROR_DISCONNECT_COUNT) {
+ // reset other half if disconnected
+ int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ matrix[slaveOffset+i] = 0;
+ }
+ }
+ } else {
+ // turn off the indicator led on no error
+ TXLED0;
+ error_count = 0;
+ }
+ matrix_scan_quantum();
+ return ret;
+}
+
+void matrix_slave_scan(void) {
+ _matrix_scan();
+
+ int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#ifdef USE_I2C
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ i2c_slave_buffer[i] = matrix[offset+i];
+ }
+#else // USE_SERIAL
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ serial_slave_buffer[i] = matrix[offset+i];
+ }
+#endif
+ matrix_slave_scan_user();
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing) return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop16(matrix[i]);
+ }
+ return count;
+}
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+ for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+ uint8_t pin = col_pins[x];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+ }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+ // Store last value of row prior to reading
+ matrix_row_t last_row_value = current_matrix[current_row];
+
+ // Clear data in matrix row
+ current_matrix[current_row] = 0;
+
+ // Select row and wait for row selecton to stabilize
+ select_row(current_row);
+ wait_us(30);
+
+ // For each col...
+ for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+ // Select the col pin to read (active low)
+ uint8_t pin = col_pins[col_index];
+ uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+ // Populate the matrix row with the state of the col pin
+ current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
+ }
+
+ // Unselect row
+ unselect_row(current_row);
+
+ return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+ uint8_t pin = row_pins[row];
+ _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
+ _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+ uint8_t pin = row_pins[row];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+ for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+ uint8_t pin = row_pins[x];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+ }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+ for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+ uint8_t pin = row_pins[x];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+ }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+ bool matrix_changed = false;
+
+ // Select col and wait for col selecton to stabilize
+ select_col(current_col);
+ wait_us(30);
+
+ // For each row...
+ for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
+ {
+
+ // Store last value of row prior to reading
+ matrix_row_t last_row_value = current_matrix[row_index];
+
+ // Check row pin state
+ if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+ {
+ // Pin LO, set col bit
+ current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+ }
+ else
+ {
+ // Pin HI, clear col bit
+ current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+ }
+
+ // Determine if the matrix changed state
+ if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+ {
+ matrix_changed = true;
+ }
+ }
+
+ // Unselect col
+ unselect_col(current_col);
+
+ return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+ uint8_t pin = col_pins[col];
+ _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
+ _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+ uint8_t pin = col_pins[col];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+ for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+ uint8_t pin = col_pins[x];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+ }
+}
+
+#endif
--- /dev/null
+Let's Split
+======
+
+This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/
+
+Split keyboard firmware for Arduino Pro Micro or other ATmega32u4
+based boards.
+
+**Hardware files for the Let's Split are now stored at http://qmk.fm/lets_split/**
+**Hardware files for the sockets version can be found at https://github.com/dumle29/let-s-Split-v2/tree/socket-reverseable**
+
+## Build Guide
+
+A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide)
+
+There is additional information there about flashing and adding RGB underglow.
+
+A build guide for putting together the sockets version can be found here: *Guide will be made and linked here when the PCBs have been received and tested*
+
+## First Time Setup
+
+Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:
+
+```
+$ make lets_split/rev2:default
+```
+
+You will see a lot of output and if everything worked correctly you will see the built hex file:
+
+```
+lets_split_rev2_default.hex
+```
+
+If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so:
+
+
+```
+$ make lets_split/rev2:YOUR_KEYMAP_NAME
+```
+
+If everything worked correctly you will see a file:
+
+```
+lets_split_rev2_YOUR_KEYMAP_NAME.hex
+```
+
+For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md.
+
+### Let's split 1.0
+If you have a first generation Let's Split you will need to use the revision 1 code. To do so, use `rev1` in all your commands instead.
+
+Features
+--------
+
+For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md).
+
+Some features supported by the firmware:
+
+* Either half can connect to the computer via USB, or both halves can be used
+ independently.
+* You only need 3 wires to connect the two halves. Two for VCC and GND and one
+ for serial communication.
+* Optional support for I2C connection between the two halves if for some
+ reason you require a faster connection between the two halves. Note this
+ requires an extra wire between halves and pull-up resistors on the data lines.
+
+Required Hardware
+-----------------
+
+Apart from diodes and key switches for the keyboard matrix in each half, you
+will need:
+
+* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each.
+* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable
+
+Alternatively, you can use any sort of cable and socket that has at least 3
+wires. If you want to use I2C to communicate between halves, you will need a
+cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
+
+Optional Hardware
+-----------------
+
+A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
+
+Wiring
+------
+
+The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
+PD0 on the ATmega32u4) between the two Pro Micros.
+
+Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro
+and modify the `matrix.c` accordingly.
+
+The wiring for serial:
+
+
+
+The wiring for i2c:
+
+
+
+The pull-up resistors may be placed on either half. It is also possible
+to use 4 resistors and have the pull-ups in both halves, but this is
+unnecessary in simple use cases.
+
+You can change your configuration between serial and i2c by modifying your `config.h` file.
+
+Notes on Software Configuration
+-------------------------------
+
+Configuring the firmware is similar to any other QMK project. One thing
+to note is that `MATRIX_ROWS` in `config.h` is the total number of rows between
+the two halves, i.e. if your split keyboard has 4 rows in each half, then use
+`MATRIX_ROWS=8`.
+
+Also, the current implementation assumes a maximum of 8 columns, but it would
+not be very difficult to adapt it to support more if required.
+
+Flashing
+-------
+From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing.
+Example: `make lets_split/rev2:default:avrdude`
+
+
+Choosing which board to plug the USB cable into (choosing Master)
+--------
+Because the two boards are identical, the firmware has logic to differentiate the left and right board.
+
+It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable.
+
+The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side.
+
+The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
+
+### Setting the left hand as master
+If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
+
+### Setting the right hand as master
+If you always plug the usb cable into the right board, add an extra flag to your `config.h`
+```
+ #define MASTER_RIGHT
+```
+
+### Setting EE_hands to use either hands as master
+If you define `EE_HANDS` in your `config.h`, you will need to set the
+EEPROM for the left and right halves.
+
+The EEPROM is used to store whether the
+half is left handed or right handed. This makes it so that the same firmware
+file will run on both hands instead of having to flash left and right handed
+versions of the firmware to each half. To flash the EEPROM file for the left
+half run:
+```
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
+// or the equivalent in dfu-programmer
+
+```
+and similarly for right half
+```
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
+// or the equivalent in dfu-programmer
+```
+
+NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
+
+After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
+
+Note that you need to program both halves, but you have the option of using
+different keymaps for each half. You could program the left half with a QWERTY
+layout and the right half with a Colemak layout using bootmagic's default layout option.
+Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
+right half is connected.
+
+
+Notes on Using Pro Micro 3.3V
+-----------------------------
+
+Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
+the frequency on the 3.3V board.
+
+Also, if the slave board is producing weird characters in certain columns,
+update the following line in `matrix.c` to the following:
+
+```
+// _delay_us(30); // without this wait read unstable value.
+_delay_us(300); // without this wait read unstable value.
+```
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4131
+#define PRODUCT_ID 0x5141
+#define DEVICE_VER 0x0001
+#define MANUFACTURER XeaLouS
+#define PRODUCT XeaL60
+#define DESCRIPTION A split keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// wiring of each half
+//ascii art of pro micro
+// PORT
+//PD3 TX0 RAW
+//PD2 RX1 GND
+// GND RESET
+// GND VCC
+//PD1 2 A3 PF4
+//PD0 3 A2 PF5
+//PD4 4 A1 PF6
+//PC6 5 A0 PF7
+//PD7 6 15 PB1
+//PE6 7 14 PB3
+//PB4 8 13 PB2
+//PB5 9 10 PB6
+
+#define MATRIX_ROW_PINS { B5, B4, E6, D7, C6 }
+#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5 }
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- /dev/null
+#include "lets_split.h"
+
+void matrix_init_kb(void) {
+
+ // // green led on
+ // DDRD |= (1<<5);
+ // PORTD &= ~(1<<5);
+
+ // // orange led on
+ // DDRB |= (1<<0);
+ // PORTB &= ~(1<<0);
+
+ matrix_init_user();
+};
+
--- /dev/null
+#ifndef REV1_H
+#define REV1_H
+
+#include "lets_split.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+//void promicro_bootloader_jmp(bool program);
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+ L10, L11, L12, L13, L14, L15, L16, L17, R11, R12, R13, R14, R15, R16, \
+ L20, L21, L22, L23, L24, L25, L26, R21, R22, R23, R24, R25, R26, \
+ L30, L31, L32, L33, L34, L35, R31, R32, R33, R34, R35, R36, \
+ L40, L41, L42, L43, L44, R42, R43, R44, R45, R46 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05, L06 }, \
+ { L10, L11, L12, L13, L14, L15, L16, L17 }, \
+ { L20, L21, L22, L23, L24, L25, L26 }, \
+ { L30, L31, L32, L33, L34, L35 }, \
+ { L40, L41, L42, L43, L44 }, \
+ { R00, R01, R02, R03, R04, R05, R06}, \
+ { R11, R12, R13, R14, R15, R16 }, \
+ { R21, R22, R23, R24, R25, R26 }, \
+ { R31, R32, R33, R34, R35, R36 }, \
+ { R42, R43, R44, R45, R46 } \
+ }
+
+#define LAYOUT_split60 LAYOUT
+
+#endif
--- /dev/null
+BACKLIGHT_ENABLE = no
\ No newline at end of file
--- /dev/null
+SRC += matrix.c \
+ split_util.c \
+ serial.c \
+ ssd1306.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SUBPROJECT_rev1 = yes
+USE_I2C = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
+
+LAYOUTS = ortho_4x12
+
+DEFAULT_FOLDER = lets_split/rev2
--- /dev/null
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifndef USE_I2C
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+ _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+ SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+ SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
+ SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+uint8_t serial_read_pin(void) {
+ return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+ SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+ SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+ serial_output();
+ serial_high();
+}
+
+void serial_slave_init(void) {
+ serial_input();
+
+ // Enable INT0
+ EIMSK |= _BV(INT0);
+ // Trigger on falling edge of INT0
+ EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+ serial_input();
+ // This shouldn't hang if the slave disconnects because the
+ // serial line will float to high if the slave does disconnect.
+ while (!serial_read_pin());
+ serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+ serial_output();
+
+ serial_low();
+ serial_delay();
+
+ serial_high();
+}
+
+// Reads a byte from the serial line
+static
+uint8_t serial_read_byte(void) {
+ uint8_t byte = 0;
+ serial_input();
+ for ( uint8_t i = 0; i < 8; ++i) {
+ byte = (byte << 1) | serial_read_pin();
+ serial_delay();
+ _delay_us(1);
+ }
+
+ return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(uint8_t data) {
+ uint8_t b = 8;
+ serial_output();
+ while( b-- ) {
+ if(data & (1 << b)) {
+ serial_high();
+ } else {
+ serial_low();
+ }
+ serial_delay();
+ }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+ sync_send();
+
+ uint8_t checksum = 0;
+ for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+ serial_write_byte(serial_slave_buffer[i]);
+ sync_send();
+ checksum += serial_slave_buffer[i];
+ }
+ serial_write_byte(checksum);
+ sync_send();
+
+ // wait for the sync to finish sending
+ serial_delay();
+
+ // read the middle of pulses
+ _delay_us(SERIAL_DELAY/2);
+
+ uint8_t checksum_computed = 0;
+ for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+ serial_master_buffer[i] = serial_read_byte();
+ sync_send();
+ checksum_computed += serial_master_buffer[i];
+ }
+ uint8_t checksum_received = serial_read_byte();
+ sync_send();
+
+ serial_input(); // end transaction
+
+ if ( checksum_computed != checksum_received ) {
+ status |= SLAVE_DATA_CORRUPT;
+ } else {
+ status &= ~SLAVE_DATA_CORRUPT;
+ }
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+ return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+ // this code is very time dependent, so we need to disable interrupts
+ cli();
+
+ // signal to the slave that we want to start a transaction
+ serial_output();
+ serial_low();
+ _delay_us(1);
+
+ // wait for the slaves response
+ serial_input();
+ serial_high();
+ _delay_us(SERIAL_DELAY);
+
+ // check if the slave is present
+ if (serial_read_pin()) {
+ // slave failed to pull the line low, assume not present
+ sei();
+ return 1;
+ }
+
+ // if the slave is present syncronize with it
+ sync_recv();
+
+ uint8_t checksum_computed = 0;
+ // receive data from the slave
+ for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+ serial_slave_buffer[i] = serial_read_byte();
+ sync_recv();
+ checksum_computed += serial_slave_buffer[i];
+ }
+ uint8_t checksum_received = serial_read_byte();
+ sync_recv();
+
+ if (checksum_computed != checksum_received) {
+ sei();
+ return 1;
+ }
+
+ uint8_t checksum = 0;
+ // send data to the slave
+ for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+ serial_write_byte(serial_master_buffer[i]);
+ sync_recv();
+ checksum += serial_master_buffer[i];
+ }
+ serial_write_byte(checksum);
+ sync_recv();
+
+ // always, release the line when not in use
+ serial_output();
+ serial_high();
+
+ sei();
+ return 0;
+}
+
+#endif
--- /dev/null
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include <stdbool.h>
+
+/* TODO: some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif
--- /dev/null
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+#include "timer.h"
+
+#ifdef USE_I2C
+# include "i2c.h"
+#else
+# include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+ #ifdef EE_HANDS
+ isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+ #else
+ // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+ #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+ isLeftHand = !has_usb();
+ #else
+ isLeftHand = has_usb();
+ #endif
+ #endif
+}
+
+static void keyboard_master_setup(void) {
+#ifdef USE_I2C
+ i2c_master_init();
+#ifdef SSD1306OLED
+ matrix_master_OLED_init ();
+#endif
+#else
+ serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+ timer_init();
+#ifdef USE_I2C
+ i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+ serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+ USBCON |= (1 << OTGPADE); //enables VBUS pad
+ _delay_us(5);
+ return (USBSTA & (1<<VBUS)); //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+ setup_handedness();
+
+ if (has_usb()) {
+ keyboard_master_setup();
+ } else {
+ keyboard_slave_setup();
+ }
+ sei();
+}
+
+void keyboard_slave_loop(void) {
+ matrix_init();
+
+ while (1) {
+ matrix_slave_scan();
+ }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+ split_keyboard_setup();
+
+ if (!has_usb()) {
+ keyboard_slave_loop();
+ }
+}
--- /dev/null
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+#include "eeconfig.h"
+
+#define SLAVE_I2C_ADDRESS 0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+void keyboard_slave_loop(void);
+
+void matrix_master_OLED_init (void);
+
+#endif
projects / qmk_firmware.git / commitdiff