--- /dev/null
+/*
+Copyright 2018 Rasmus Schults <rasmusx@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6050
+#define DEVICE_VER 0x0100
+#define MANUFACTURER LeeKu
+#define PRODUCT L3
+#define DESCRIPTION QMK keyboard firmware for L3
+
+#define RGBLED_NUM 12
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B3, B4, B5, B6, B7 }
+#define MATRIX_ROW_PINS { C3, C4, C5, C6, C7 }
+#define UNUSED_PINS
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 1
+
--- /dev/null
+/* Copyright 2018 Rasmus Schults <rasmusx@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+ K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, \
+ K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, \
+ K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, K2P, \
+ K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1O, K1P, \
+ K0A, K0B, K0C, K0D, K0G, K0I, K0J, K0M, K0N, K0O, K0P \
+) { \
+ { K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P }, \
+ { K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, KC_NO, K3P }, \
+ { K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, KC_NO, K2P }, \
+ { K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, KC_NO, K1O, K1P }, \
+ { K0A, K0B, K0C, K0D, KC_NO, KC_NO, K0G, KC_NO, K0I, K0J, KC_NO, KC_NO, K0M, K0N, K0O, K0P } \
+}
+
+#define LAYOUT_65_ansi( \
+ K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4O, K4P, \
+ K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, \
+ K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2N, K2P, \
+ K1A, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1O, K1P, \
+ K0A, K0B, K0C, K0G, K0J, K0M, K0N, K0O, K0P \
+) { \
+ { K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, KC_NO, K4O, K4P }, \
+ { K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, KC_NO, K3P }, \
+ { K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, KC_NO, K2N, KC_NO, K2P }, \
+ { K1A, KC_NO, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, KC_NO, K1O, K1P }, \
+ { K0A, K0B, K0C, KC_NO, KC_NO, KC_NO, K0G, KC_NO, KC_NO, K0J, KC_NO, KC_NO, K0M, K0N, K0O, K0P } \
+}
+
+#define LAYOUT_65_ansi_split_bs( \
+ K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, \
+ K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, \
+ K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2N, K2P, \
+ K1A, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1O, K1P, \
+ K0A, K0B, K0C, K0G, K0J, K0M, K0N, K0O, K0P \
+) { \
+ { K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P }, \
+ { K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, KC_NO, K3P }, \
+ { K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, KC_NO, K2N, KC_NO, K2P }, \
+ { K1A, KC_NO, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, KC_NO, K1O, K1P }, \
+ { K0A, K0B, K0C, KC_NO, KC_NO, KC_NO, K0G, KC_NO, KC_NO, K0J, KC_NO, KC_NO, K0M, K0N, K0O, K0P } \
+}
--- /dev/null
+{
+ "keyboard_name": "Leeku Finger65",
+ "url": "",
+ "maintainer": "sidcarter",
+ "width": 16,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [
+ {
+ "label": "K4A",
+ "x": 0,
+ "y": 0
+ },
+ {
+ "label": "K4B",
+ "x": 1,
+ "y": 0
+ },
+ {
+ "label": "K4C",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "K4D",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "K4E",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "K4F",
+ "x": 5,
+ "y": 0
+ },
+ {
+ "label": "K4G",
+ "x": 6,
+ "y": 0
+ },
+ {
+ "label": "K4H",
+ "x": 7,
+ "y": 0
+ },
+ {
+ "label": "K4I",
+ "x": 8,
+ "y": 0
+ },
+ {
+ "label": "K4J",
+ "x": 9,
+ "y": 0
+ },
+ {
+ "label": "K4K",
+ "x": 10,
+ "y": 0
+ },
+ {
+ "label": "K4L",
+ "x": 11,
+ "y": 0
+ },
+ {
+ "label": "K4M",
+ "x": 12,
+ "y": 0
+ },
+ {
+ "label": "K4N",
+ "x": 13,
+ "y": 0
+ },
+ {
+ "label": "K4O",
+ "x": 14,
+ "y": 0
+ },
+ {
+ "label": "K4P",
+ "x": 15,
+ "y": 0
+ },
+ {
+ "label": "K3A",
+ "x": 0,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "K3B",
+ "x": 1.5,
+ "y": 1
+ },
+ {
+ "label": "K3C",
+ "x": 2.5,
+ "y": 1
+ },
+ {
+ "label": "K3D",
+ "x": 3.5,
+ "y": 1
+ },
+ {
+ "label": "K3E",
+ "x": 4.5,
+ "y": 1
+ },
+ {
+ "label": "K3F",
+ "x": 5.5,
+ "y": 1
+ },
+ {
+ "label": "K3G",
+ "x": 6.5,
+ "y": 1
+ },
+ {
+ "label": "K3H",
+ "x": 7.5,
+ "y": 1
+ },
+ {
+ "label": "K3I",
+ "x": 8.5,
+ "y": 1
+ },
+ {
+ "label": "K3J",
+ "x": 9.5,
+ "y": 1
+ },
+ {
+ "label": "K3K",
+ "x": 10.5,
+ "y": 1
+ },
+ {
+ "label": "K3L",
+ "x": 11.5,
+ "y": 1
+ },
+ {
+ "label": "K3M",
+ "x": 12.5,
+ "y": 1
+ },
+ {
+ "label": "K3N",
+ "x": 13.5,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "K3P",
+ "x": 15,
+ "y": 1
+ },
+ {
+ "label": "K2A",
+ "x": 0,
+ "y": 2,
+ "w": 1.75
+ },
+ {
+ "label": "K2B",
+ "x": 1.75,
+ "y": 2
+ },
+ {
+ "label": "K2C",
+ "x": 2.75,
+ "y": 2
+ },
+ {
+ "label": "K2D",
+ "x": 3.75,
+ "y": 2
+ },
+ {
+ "label": "K2E",
+ "x": 4.75,
+ "y": 2
+ },
+ {
+ "label": "K2F",
+ "x": 5.75,
+ "y": 2
+ },
+ {
+ "label": "K2G",
+ "x": 6.75,
+ "y": 2
+ },
+ {
+ "label": "K2H",
+ "x": 7.75,
+ "y": 2
+ },
+ {
+ "label": "K2I",
+ "x": 8.75,
+ "y": 2
+ },
+ {
+ "label": "K2J",
+ "x": 9.75,
+ "y": 2
+ },
+ {
+ "label": "K2K",
+ "x": 10.75,
+ "y": 2
+ },
+ {
+ "label": "K2L",
+ "x": 11.75,
+ "y": 2
+ },
+ {
+ "label": "K2M",
+ "x": 12.75,
+ "y": 2
+ },
+ {
+ "label": "K2N",
+ "x": 13.75,
+ "y": 2,
+ "w": 1.25
+ },
+ {
+ "label": "K2P",
+ "x": 15,
+ "y": 2
+ },
+ {
+ "label": "K1A",
+ "x": 0,
+ "y": 3,
+ "w": 1.25
+ },
+ {
+ "label": "K1B",
+ "x": 1.25,
+ "y": 3
+ },
+ {
+ "label": "K1C",
+ "x": 2.25,
+ "y": 3
+ },
+ {
+ "label": "K1D",
+ "x": 3.25,
+ "y": 3
+ },
+ {
+ "label": "K1E",
+ "x": 4.25,
+ "y": 3
+ },
+ {
+ "label": "K1F",
+ "x": 5.25,
+ "y": 3
+ },
+ {
+ "label": "K1G",
+ "x": 6.25,
+ "y": 3
+ },
+ {
+ "label": "K1H",
+ "x": 7.25,
+ "y": 3
+ },
+ {
+ "label": "K1I",
+ "x": 8.25,
+ "y": 3
+ },
+ {
+ "label": "K1J",
+ "x": 9.25,
+ "y": 3
+ },
+ {
+ "label": "K1K",
+ "x": 10.25,
+ "y": 3
+ },
+ {
+ "label": "K1L",
+ "x": 11.25,
+ "y": 3
+ },
+ {
+ "label": "K1M",
+ "x": 12.25,
+ "y": 3,
+ "w": 1.75
+ },
+ {
+ "label": "K1O",
+ "x": 14,
+ "y": 3
+ },
+ {
+ "label": "K1P",
+ "x": 15,
+ "y": 3
+ },
+ {
+ "label": "K0A",
+ "x": 0,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "K0B",
+ "x": 1.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "K0C",
+ "x": 2.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "K0D",
+ "x": 3.75,
+ "y": 4,
+ "w": 2.25
+ },
+ {
+ "label": "K0G",
+ "x": 6,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "K0I",
+ "x": 7.25,
+ "y": 4,
+ "w": 2.75
+ },
+ {
+ "label": "K0J",
+ "x": 10,
+ "y": 4,
+ "w": 1.5
+ },
+ {
+ "label": "K0M",
+ "x": 11.5,
+ "y": 4,
+ "w": 1.5
+ },
+ {
+ "label": "K0N",
+ "x": 13,
+ "y": 4
+ },
+ {
+ "label": "K0O",
+ "x": 14,
+ "y": 4
+ },
+ {
+ "label": "K0P",
+ "x": 15,
+ "y": 4
+ }
+ ]
+ },
+ "LAYOUT_65_ansi": {
+ "layout": [
+ {
+ "label": "K4A",
+ "x": 0,
+ "y": 0
+ },
+ {
+ "label": "K4B",
+ "x": 1,
+ "y": 0
+ },
+ {
+ "label": "K4C",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "K4D",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "K4E",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "K4F",
+ "x": 5,
+ "y": 0
+ },
+ {
+ "label": "K4G",
+ "x": 6,
+ "y": 0
+ },
+ {
+ "label": "K4H",
+ "x": 7,
+ "y": 0
+ },
+ {
+ "label": "K4I",
+ "x": 8,
+ "y": 0
+ },
+ {
+ "label": "K4J",
+ "x": 9,
+ "y": 0
+ },
+ {
+ "label": "K4K",
+ "x": 10,
+ "y": 0
+ },
+ {
+ "label": "K4L",
+ "x": 11,
+ "y": 0
+ },
+ {
+ "label": "K4M",
+ "x": 12,
+ "y": 0
+ },
+ {
+ "label": "K4O",
+ "x": 13,
+ "y": 0,
+ "w": 2
+ },
+ {
+ "label": "K4P",
+ "x": 15,
+ "y": 0
+ },
+ {
+ "label": "K3A",
+ "x": 0,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "K3B",
+ "x": 1.5,
+ "y": 1
+ },
+ {
+ "label": "K3C",
+ "x": 2.5,
+ "y": 1
+ },
+ {
+ "label": "K3D",
+ "x": 3.5,
+ "y": 1
+ },
+ {
+ "label": "K3E",
+ "x": 4.5,
+ "y": 1
+ },
+ {
+ "label": "K3F",
+ "x": 5.5,
+ "y": 1
+ },
+ {
+ "label": "K3G",
+ "x": 6.5,
+ "y": 1
+ },
+ {
+ "label": "K3H",
+ "x": 7.5,
+ "y": 1
+ },
+ {
+ "label": "K3I",
+ "x": 8.5,
+ "y": 1
+ },
+ {
+ "label": "K3J",
+ "x": 9.5,
+ "y": 1
+ },
+ {
+ "label": "K3K",
+ "x": 10.5,
+ "y": 1
+ },
+ {
+ "label": "K3L",
+ "x": 11.5,
+ "y": 1
+ },
+ {
+ "label": "K3M",
+ "x": 12.5,
+ "y": 1
+ },
+ {
+ "label": "K4N",
+ "x": 13.5,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "K3P",
+ "x": 15,
+ "y": 1
+ },
+ {
+ "label": "K2A",
+ "x": 0,
+ "y": 2,
+ "w": 1.75
+ },
+ {
+ "label": "K2B",
+ "x": 1.75,
+ "y": 2
+ },
+ {
+ "label": "K2C",
+ "x": 2.75,
+ "y": 2
+ },
+ {
+ "label": "K2D",
+ "x": 3.75,
+ "y": 2
+ },
+ {
+ "label": "K2E",
+ "x": 4.75,
+ "y": 2
+ },
+ {
+ "label": "K2F",
+ "x": 5.75,
+ "y": 2
+ },
+ {
+ "label": "K2G",
+ "x": 6.75,
+ "y": 2
+ },
+ {
+ "label": "K2H",
+ "x": 7.75,
+ "y": 2
+ },
+ {
+ "label": "K2I",
+ "x": 8.75,
+ "y": 2
+ },
+ {
+ "label": "K2J",
+ "x": 9.75,
+ "y": 2
+ },
+ {
+ "label": "K2K",
+ "x": 10.75,
+ "y": 2
+ },
+ {
+ "label": "K2L",
+ "x": 11.75,
+ "y": 2
+ },
+ {
+ "label": "K2N",
+ "x": 12.75,
+ "y": 2,
+ "w": 2.25
+ },
+ {
+ "label": "K2P",
+ "x": 15,
+ "y": 2
+ },
+ {
+ "label": "K1A",
+ "x": 0,
+ "y": 3,
+ "w": 2.25
+ },
+ {
+ "label": "K1B",
+ "x": 2.25,
+ "y": 3
+ },
+ {
+ "label": "K1C",
+ "x": 3.25,
+ "y": 3
+ },
+ {
+ "label": "K1D",
+ "x": 4.25,
+ "y": 3
+ },
+ {
+ "label": "K1E",
+ "x": 5.25,
+ "y": 3
+ },
+ {
+ "label": "K1F",
+ "x": 6.25,
+ "y": 3
+ },
+ {
+ "label": "K1G",
+ "x": 7.25,
+ "y": 3
+ },
+ {
+ "label": "K1H",
+ "x": 8.25,
+ "y": 3
+ },
+ {
+ "label": "K1J",
+ "x": 9.25,
+ "y": 3
+ },
+ {
+ "label": "K1K",
+ "x": 10.25,
+ "y": 3
+ },
+ {
+ "label": "K1L",
+ "x": 11.25,
+ "y": 3
+ },
+ {
+ "label": "K1M",
+ "x": 12.25,
+ "y": 3,
+ "w": 1.75
+ },
+ {
+ "label": "K1O",
+ "x": 14,
+ "y": 3
+ },
+ {
+ "label": "K1P",
+ "x": 15,
+ "y": 3
+ },
+ {
+ "label": "K0A",
+ "x": 0,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "K0B",
+ "x": 1.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "K0C",
+ "x": 2.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "K0G",
+ "x": 3.75,
+ "y": 4,
+ "w": 6.25
+ },
+ {
+ "label": "K0J",
+ "x": 10,
+ "y": 4,
+ "w": 1.5
+ },
+ {
+ "label": "K0M",
+ "x": 11.5,
+ "y": 4,
+ "w": 1.5
+ },
+ {
+ "label": "K0N",
+ "x": 13,
+ "y": 4
+ },
+ {
+ "label": "K0O",
+ "x": 14,
+ "y": 4
+ },
+ {
+ "label": "K0P",
+ "x": 15,
+ "y": 4
+ }
+ ]
+ },
+ "LAYOUT_65_ansi_split_bs": {
+ "layout": [
+ {
+ "label": "K4A",
+ "x": 0,
+ "y": 0
+ },
+ {
+ "label": "K4B",
+ "x": 1,
+ "y": 0
+ },
+ {
+ "label": "K4C",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "K4D",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "K4E",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "K4F",
+ "x": 5,
+ "y": 0
+ },
+ {
+ "label": "K4G",
+ "x": 6,
+ "y": 0
+ },
+ {
+ "label": "K4H",
+ "x": 7,
+ "y": 0
+ },
+ {
+ "label": "K4I",
+ "x": 8,
+ "y": 0
+ },
+ {
+ "label": "K4J",
+ "x": 9,
+ "y": 0
+ },
+ {
+ "label": "K4K",
+ "x": 10,
+ "y": 0
+ },
+ {
+ "label": "K4L",
+ "x": 11,
+ "y": 0
+ },
+ {
+ "label": "K4M",
+ "x": 12,
+ "y": 0
+ },
+ {
+ "label": "K4N",
+ "x": 13,
+ "y": 0
+ },
+ {
+ "label": "K4O",
+ "x": 14,
+ "y": 0
+ },
+ {
+ "label": "K4P",
+ "x": 15,
+ "y": 0
+ },
+ {
+ "label": "K3A",
+ "x": 0,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "K3B",
+ "x": 1.5,
+ "y": 1
+ },
+ {
+ "label": "K3C",
+ "x": 2.5,
+ "y": 1
+ },
+ {
+ "label": "K3D",
+ "x": 3.5,
+ "y": 1
+ },
+ {
+ "label": "K3E",
+ "x": 4.5,
+ "y": 1
+ },
+ {
+ "label": "K3F",
+ "x": 5.5,
+ "y": 1
+ },
+ {
+ "label": "K3G",
+ "x": 6.5,
+ "y": 1
+ },
+ {
+ "label": "K3H",
+ "x": 7.5,
+ "y": 1
+ },
+ {
+ "label": "K3I",
+ "x": 8.5,
+ "y": 1
+ },
+ {
+ "label": "K3J",
+ "x": 9.5,
+ "y": 1
+ },
+ {
+ "label": "K3K",
+ "x": 10.5,
+ "y": 1
+ },
+ {
+ "label": "K3L",
+ "x": 11.5,
+ "y": 1
+ },
+ {
+ "label": "K3M",
+ "x": 12.5,
+ "y": 1
+ },
+ {
+ "label": "K4N",
+ "x": 13.5,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "K3P",
+ "x": 15,
+ "y": 1
+ },
+ {
+ "label": "K2A",
+ "x": 0,
+ "y": 2,
+ "w": 1.75
+ },
+ {
+ "label": "K2B",
+ "x": 1.75,
+ "y": 2
+ },
+ {
+ "label": "K2C",
+ "x": 2.75,
+ "y": 2
+ },
+ {
+ "label": "K2D",
+ "x": 3.75,
+ "y": 2
+ },
+ {
+ "label": "K2E",
+ "x": 4.75,
+ "y": 2
+ },
+ {
+ "label": "K2F",
+ "x": 5.75,
+ "y": 2
+ },
+ {
+ "label": "K2G",
+ "x": 6.75,
+ "y": 2
+ },
+ {
+ "label": "K2H",
+ "x": 7.75,
+ "y": 2
+ },
+ {
+ "label": "K2I",
+ "x": 8.75,
+ "y": 2
+ },
+ {
+ "label": "K2J",
+ "x": 9.75,
+ "y": 2
+ },
+ {
+ "label": "K2K",
+ "x": 10.75,
+ "y": 2
+ },
+ {
+ "label": "K2L",
+ "x": 11.75,
+ "y": 2
+ },
+ {
+ "label": "K2N",
+ "x": 12.75,
+ "y": 2,
+ "w": 2.25
+ },
+ {
+ "label": "K2P",
+ "x": 15,
+ "y": 2
+ },
+ {
+ "label": "K1A",
+ "x": 0,
+ "y": 3,
+ "w": 2.25
+ },
+ {
+ "label": "K1B",
+ "x": 2.25,
+ "y": 3
+ },
+ {
+ "label": "K1C",
+ "x": 3.25,
+ "y": 3
+ },
+ {
+ "label": "K1D",
+ "x": 4.25,
+ "y": 3
+ },
+ {
+ "label": "K1E",
+ "x": 5.25,
+ "y": 3
+ },
+ {
+ "label": "K1F",
+ "x": 6.25,
+ "y": 3
+ },
+ {
+ "label": "K1G",
+ "x": 7.25,
+ "y": 3
+ },
+ {
+ "label": "K1H",
+ "x": 8.25,
+ "y": 3
+ },
+ {
+ "label": "K1J",
+ "x": 9.25,
+ "y": 3
+ },
+ {
+ "label": "K1K",
+ "x": 10.25,
+ "y": 3
+ },
+ {
+ "label": "K1L",
+ "x": 11.25,
+ "y": 3
+ },
+ {
+ "label": "K1M",
+ "x": 12.25,
+ "y": 3,
+ "w": 1.75
+ },
+ {
+ "label": "K1O",
+ "x": 14,
+ "y": 3
+ },
+ {
+ "label": "K1P",
+ "x": 15,
+ "y": 3
+ },
+ {
+ "label": "K0A",
+ "x": 0,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "K0B",
+ "x": 1.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "K0C",
+ "x": 2.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "K0G",
+ "x": 3.75,
+ "y": 4,
+ "w": 6.25
+ },
+ {
+ "label": "K0J",
+ "x": 10,
+ "y": 4,
+ "w": 1.5
+ },
+ {
+ "label": "K0M",
+ "x": 11.5,
+ "y": 4,
+ "w": 1.5
+ },
+ {
+ "label": "K0N",
+ "x": 13,
+ "y": 4
+ },
+ {
+ "label": "K0O",
+ "x": 14,
+ "y": 4
+ },
+ {
+ "label": "K0P",
+ "x": 15,
+ "y": 4
+ }
+ ]
+ }
+ }
+}
--- /dev/null
+#include QMK_KEYBOARD_H
+
+enum layers {
+ _BASE,
+ _FN,
+};
+
+/*
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │ESC│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ ( │ ) │ ` │BS │HOM│
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
+ * │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │PGU│
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┼───┤
+ * │ FUNC │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │ENT │PGD│
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤
+ * │ SHIFT │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │SHIFT │UP │END│
+ * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴──┬───┼───┼───┤
+ * │CTRL│GUI │ALT │ SPACE (6.25u) │ ALT │CTRL │LFT│DWN│RGT│
+ * └────┴────┴────┴────────────────────────┴─────┴─────┴───┴───┴───┘
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BASE] = LAYOUT_all(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+ TG(_FN), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN,
+ KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+ KC_LCTL, KC_LGUI, KC_LALT, _______, KC_SPC, _______, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+
+ [_FN] = LAYOUT_all(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_DEL,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, KC_INS,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_PAUS,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END),
+};
--- /dev/null
+#include QMK_KEYBOARD_H
+
+enum layers {
+ _QWERTY,
+ _FNMS,
+};
+
+#define FNMS MO(_FNMS)
+
+/*
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │ESC│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ ( │ ) │ \ │ \ │HOM│
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┼───┼───┤
+ * │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │BKSPC│PGU│
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+ * │ ` │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ ENTER │PGD│
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+ * │ SHIFT │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │SHIFT │UP │END│
+ * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴──┬───┼───┼───┤
+ * │CTRL │GUI│ ALT │ SPACE (6.25u) │ ALT │CTRL │LFT│DWN│RGT│
+ * └─────┴───┴─────┴───────────────────────┴─────┴─────┴───┴───┴───┘
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_QWERTY] = LAYOUT_65_ansi_split_bs(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSLS, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP,
+ KC_GRV, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+ KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, FNMS, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [_FNMS] = LAYOUT_65_ansi_split_bs(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, KC_MPLY,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, KC_VOLU,
+ AG_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, KC_VOLD,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BTN1, KC_MS_U,KC_MNXT,
+ _______, _______, _______, _______, _______, _______, KC_MS_L,KC_MS_D, KC_MS_R
+ ),
+};
+
+// uint32_t layer_state_set_user(uint32_t state) {
+// switch(biton32(state)) {
+// case _FNMS:
+// led_off();
+// rgb_on();
+// break;
+// default:
+// led_off();
+// rgb_off();
+// break;
+// }
+// return state;
+// }
--- /dev/null
+MOUSEKEY_ENABLE = yes
--- /dev/null
+# Leeku Finger65 PCB
+
+* Keyboard Maintainer: [sidcarter](https://github.com/sidcarter)
+* Hardware Supported: LeeKu Finger65 PCB, atmega32a
+
+* Make example for this keyboard (after setting up your build environment):
+
+ make leeku/finger65:default
+
+* This PCB is not QMK ready by default. If you want to use your Leeku Finger65 PCB with QMK, you must:
+
+ * ISP Flash the Leeku PCB using the bootloader for the atmega32a that resides in the `util/` folder
+ * Build and install [bootloadHID](https://www.obdev.at/products/vusb/bootloadhid.html) on your system
+ * You can then do a `make leeku/finger65:default:flash` to flash your PCB with QMK
+
+* See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32a
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = bootloadHID
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = no # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no # USB Nkey Rollover
+MIDI_ENABLE = no # MIDI support
--- /dev/null
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT 3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT 2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC 0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT 4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER 3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT 0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE 0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_IS_SELF_POWERED 0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE 1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ 0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL 0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE 0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS 0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF 0
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ * in YL, TCNT0
+ * sts timer0Snapshot, YL
+ * endm
+ * #endif
+ * #define USB_SOF_HOOK myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING 0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC 0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME 'L', 'e', 'e', 'k', 'u'
+#define USB_CFG_VENDOR_NAME_LEN 5
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME 'F', 'i', 'n', 'g', 'e', 'r', '6', '5'
+#define USB_CFG_DEVICE_NAME_LEN 8
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS 0
+#define USB_CFG_DEVICE_SUBCLASS 0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS 3 /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ * you want RAM pointers.
+ * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ * in static memory is in RAM, not in flash memory.
+ * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ * the driver must know the descriptor's length. The descriptor itself is
+ * found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ * char usbDescriptorDevice[];
+ * char usbDescriptorConfiguration[];
+ * char usbDescriptorHidReport[];
+ * char usbDescriptorString0[];
+ * int usbDescriptorStringVendor[];
+ * int usbDescriptorStringDevice[];
+ * int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ * USB_CFG_DESCR_PROPS_DEVICE
+ * USB_CFG_DESCR_PROPS_CONFIGURATION
+ * USB_CFG_DESCR_PROPS_STRINGS
+ * USB_CFG_DESCR_PROPS_STRING_0
+ * USB_CFG_DESCR_PROPS_STRING_VENDOR
+ * USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ * USB_CFG_DESCR_PROPS_HID
+ * USB_CFG_DESCR_PROPS_HID_REPORT
+ * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int serialNumberDescriptor[] = {
+ * USB_STRING_DESCRIPTOR_HEADER(6),
+ * 'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE 0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRINGS 0
+#define USB_CFG_DESCR_PROPS_STRING_0 0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_UNKNOWN 0
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG MCUCR */
+/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR 0 */
+/* #define USB_INTR_ENABLE GIMSK */
+/* #define USB_INTR_ENABLE_BIT INT0 */
+/* #define USB_INTR_PENDING GIFR */
+/* #define USB_INTR_PENDING_BIT INTF0 */
+/* #define USB_INTR_VECTOR INT0_vect */
+
+#endif /* __usbconfig_h_included__ */
projects / qmk_firmware.git / commitdiff