--- /dev/null
+/*
+Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x1337
+#define DEVICE_VER 0x0001
+#define MANUFACTURER BathroomEpiphanies
+#define PRODUCT Unloved Bastard
+#define DESCRIPTION Unloved Bastard controller for CM Masterkeys S
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif
--- /dev/null
+/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+// place overrides here
+
+#endif
--- /dev/null
+/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "unloved_bastard.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
+ KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
+ KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT )
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- /dev/null
+# The default keymap for unloved_bastard
--- /dev/null
+/*
+ Copyright 2017 Gabriel Young <gabeplaysdrums@live.com>
+ Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+#ifndef DEBOUNCING_DELAY
+# define DEBOUNCING_DELAY 5
+#endif
+static uint8_t debouncing = DEBOUNCING_DELAY;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t scan_col(void) {
+ return (
+ (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<0)) |
+ (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<1)) |
+ (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<2)) |
+ (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<3)) |
+ (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<4)) |
+ (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<5)) |
+ (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<6)) |
+ (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<7))
+ );
+}
+
+static void select_col(uint8_t col) {
+ switch (col) {
+ case 0: PORTD = (PORTD & ~0b00111111) | 0b00110011; break;
+ case 1: PORTD = (PORTD & ~0b00111111) | 0b00100011; break;
+ case 2: PORTD = (PORTD & ~0b00111111) | 0b00010111; break;
+ case 3: PORTD = (PORTD & ~0b00111111) | 0b00110011; break;
+ case 4: PORTD = (PORTD & ~0b00111111) | 0b00010011; break;
+ case 5: PORTD = (PORTD & ~0b00111111) | 0b00011011; break;
+ case 6: PORTD = (PORTD & ~0b00111111) | 0b00110100; break;
+ case 7: PORTD = (PORTD & ~0b00111111) | 0b00111010; break;
+ case 8: PORTD = (PORTD & ~0b00111111) | 0b00111000; break;
+ case 9: PORTD = (PORTD & ~0b00111111) | 0b00111100; break;
+ case 10: PORTD = (PORTD & ~0b00111111) | 0b00110010; break;
+ case 11: PORTD = (PORTD & ~0b00111111) | 0b00011111; break;
+ case 12: PORTD = (PORTD & ~0b00111111) | 0b00001111; break;
+ case 13: PORTD = (PORTD & ~0b00111111) | 0b00100111; break;
+ case 14: PORTD = (PORTD & ~0b00111111) | 0b00000111; break;
+ case 15: PORTD = (PORTD & ~0b00111111) | 0b00110110; break;
+ case 16: PORTD = (PORTD & ~0b00111111) | 0b00001011; break;
+ case 17: PORTD = (PORTD & ~0b00111111) | 0b00000011; break;
+ }
+}
+
+void matrix_init(void) {
+ /* Row output pins */
+ DDRD |= 0b00111111;
+ /* Column input pins */
+ DDRC &= ~0b10000000;
+ DDRB &= ~0b01111111;
+ PORTC |= 0b10000000;
+ PORTB |= 0b01111111;
+
+ for (uint8_t i=0; i < MATRIX_ROWS; i++)
+ matrix[i] = matrix_debouncing[i] = 0;
+
+ matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ select_col(col);
+ _delay_us(3);
+ matrix_row_t col_scan = scan_col();
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+ bool curr_bit = col_scan & (1<<row);
+ if (prev_bit != curr_bit) {
+ matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+ debouncing = DEBOUNCING_DELAY;
+ }
+ }
+ }
+
+ if (debouncing) {
+ if (--debouncing)
+ _delay_ms(1);
+ else
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++)
+ matrix[i] = matrix_debouncing[i];
+ }
+
+ matrix_scan_quantum();
+ return 1;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+ return matrix[row];
+}
+
+void matrix_print(void) {
+#ifndef NO_PRINT
+ print("\nr\\c ABCDEFGHIJKLMNOPQR\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ matrix_row_t matrix_row = matrix_get_row(row);
+ xprintf("%02X: ", row);
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ bool curr_bit = matrix_row & (1<<col);
+ xprintf("%c", curr_bit ? '*' : '.');
+ }
+ print("\n");
+ }
+#endif
+}
+
+uint8_t matrix_key_count(void) {
+ uint8_t count = 0;
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++)
+ count += bitpop32(matrix[row]);
+ return count;
+}
--- /dev/null
+# unloved_bastard
+
+
+
+A short description of the keyboard/project
+
+Keyboard Maintainer: [Alexander Fougner](https://github.com/fougner)
+Hardware Supported: CoolerMaster Masterkeys S PBT (Not the Pro versions with backlighting etc)
+Hardware Availability: Pretty much anywhere
+
+Make example for this keyboard (after setting up your build environment):
+
+ make unloved_bastard:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- /dev/null
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u2
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c
--- /dev/null
+/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "unloved_bastard.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ led_init_ports();
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+ return process_record_user(keycode, record);
+}
+
+// C5 left
+// C6 middle led
+// B7 right led
+void led_init_ports(void) {
+ DDRB |= (1<<7);
+ DDRC |= (1<<5);
+ DDRC |= (1<<6);
+
+ PORTB |= (1<<7);
+ PORTC |= (1<<5);
+ PORTC |= (1<<6);
+}
+
+
+void led_set_kb(uint8_t usb_led) {
+
+ if (usb_led & (1<<USB_LED_CAPS_LOCK))
+ PORTC &= ~(1<<5);
+ else
+ PORTC |= (1<<5);
+
+ if (usb_led & (1<<USB_LED_NUM_LOCK))
+ PORTB &= ~(1<<7);
+ else
+ PORTB |= (1<<7);
+
+ if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+ PORTC &= ~(1<<6);
+ else
+ PORTC |= (1<<6);
+
+ led_set_user(usb_led);
+}
--- /dev/null
+/* Copyright 2017 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef UNLOVED_BASTARD_H
+#define UNLOVED_BASTARD_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+ KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \
+ KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \
+ KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \
+ KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \
+ KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \
+ KP4, KN2, KN6, KQ6, KN0, KN3, KM0, KP1, KC0, KQ0, KR0 \
+) \
+{ \
+/* Columns and rows need to be swapped in the below definition */ \
+/* A B C D E F G H I J K L M N O P Q R */ \
+/* 0 */ { KC_NO, KC_NO, KC0, KC_NO, KC_NO, KF0, KC_NO, KC_NO, KC_NO, KJ0, KK0, KC_NO, KM0, KN0, KO0, KC_NO, KQ0, KR0 }, \
+/* 1 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KG1, KH1, KI1, KJ1, KK1, KL1, KM1, KC_NO, KO1, KP1, KC_NO, KC_NO }, \
+/* 2 */ { KC_NO, KB2, KC_NO, KC_NO, KC_NO, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KM2, KN2, KO2, KC_NO, KC_NO, KC_NO }, \
+/* 3 */ { KC_NO, KB3, KC_NO, KC_NO, KC_NO, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KC_NO, KC_NO }, \
+/* 4 */ { KC_NO, KC_NO, KC4, KC_NO, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KM4, KC_NO, KO4, KP4, KQ4, KR4 }, \
+/* 5 */ { KC_NO, KC_NO, KC5, KC_NO, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KM5, KN5, KO5, KP5, KC_NO, KC_NO }, \
+/* 6 */ { KC_NO, KC_NO, KC6, KC_NO, KC_NO, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO,KN6, KO6, KC_NO, KQ6, KC_NO }, \
+/* 7 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KF7, KG7, KH7, KI7, KJ7, KK7, KL7, KM7, KN7, KC_NO, KP7, KC_NO, KC_NO } \
+}
+
+#endif
projects / qmk_firmware.git / commitdiff