#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER XIUDI
-#define PRODUCT XD60
-#define DESCRIPTION XD60 Keyboard by XIUDI
+#define PRODUCT XD60v2
+#define DESCRIPTION XD60 v2 Keyboard PCB by XIUDI
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
#define UNUSED_PINS
+/* Backlight Setup
+ * Only 1 level, since XD60's backlight implementation doesn't seem compatible with QMK for variable brightness
+ * Use BL_STEP to toggle LEDs instead, as BL_TOGG can be inconsistent (depending on current level)
+ */
+#define BACKLIGHT_PIN F5
+#define BACKLIGHT_LEVELS 1
+
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
+/* RGB Underglow
+ * F6 PIN for XD60v2 that has pre-soldered WS2812 LEDs
+ */
+#define RGB_DI_PIN F6
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 6 // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT),
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_LEFT, KC_DOWN, KC_RIGHT),
// 1: Function Layer
KEYMAP(
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \
KC_NO, KC_WH_U, KC_UP, KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \
KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \
- KC_LSFT, KC_NO, KC_NO, KC_APP, BL_TOGG,BL_DEC, BL_INC, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_PGDN, KC_RSFT, KC_PGUP, KC_NO, \
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, F(0), KC_HOME, KC_PGDOWN,KC_END),
+ KC_LSFT, KC_NO, KC_NO, KC_APP, BL_STEP,KC_NO, KC_NO, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_PGDN, KC_RSFT, KC_PGUP, KC_INS, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_HOME, KC_PGDOWN,KC_END),
};
+// Custom Actions
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
};
+// Macros
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
- // MACRODOWN only works in this function
+ // MACRODOWN only works in this function
switch(id) {
case 0:
- if (record->event.pressed) {
- register_code(KC_RSFT);
- } else {
- unregister_code(KC_RSFT);
- }
- break;
+ if (record->event.pressed) { register_code(KC_RSFT); }
+ else { unregister_code(KC_RSFT); }
+ break;
}
return MACRO_NONE;
};
+// Loop
void matrix_scan_user(void) {
-
- // Layer LED indicators
- uint32_t layer = layer_state;
-
- if (layer & (1<<1)) {
- xd60_esc_led_on();
- } else {
- xd60_esc_led_off();
- }
-
- /*
- if (layer & (1<<2)) {
- xd60_poker_leds_on();
- xd60_esc_led_on();
- } else {
- xd60_poker_leds_off();
- xd60_esc_led_off();
- }
- */
+ // Empty
};
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
F(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \
- KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \
+ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, F(1), KC_UP, KC_DEL, \
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT),
// 1: Function Layer
KEYMAP(
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \
- KC_CAPS, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_STEP, BL_TOGG, KC_DEL, \
+ KC_CAPS, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DEL, \
F(0), KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ENT, \
- KC_LSFT, KC_NO, KC_VOLD, KC_MUTE, KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSFT, KC_PGUP, KC_INS, \
+ KC_LSFT, KC_NO, KC_VOLD, KC_MUTE, KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PGUP, KC_INS, \
KC_LCTL, KC_LALT, KC_LGUI, KC_MPLY, KC_RGUI, KC_RALT, KC_HOME, KC_PGDOWN,KC_END),
+ // 2: RGB Layer
+ KEYMAP(
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
+ BL_STEP, RGB_TOG, RGB_MOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
+ KC_NO, RGB_HUI, RGB_SAI, RGB_VAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
+ KC_NO, KC_NO, RGB_HUD, RGB_SAD, RGB_VAD,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, F(1), KC_NO, KC_NO, \
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
+
};
+// Custom Actions
const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
+ [0] = ACTION_LAYER_MOMENTARY(1), // to Function Layer
+ [1] = ACTION_LAYER_MOMENTARY(2), // to RGB Layer
};
+// Macros
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
- // MACRODOWN only works in this function
+ // MACRODOWN only works in this function
switch(id) {
case 0:
- if (record->event.pressed) {
- register_code(KC_RSFT);
- } else {
- unregister_code(KC_RSFT);
- }
- break;
+ if (record->event.pressed) { register_code(KC_RSFT); }
+ else { unregister_code(KC_RSFT); }
+ break;
}
return MACRO_NONE;
};
+// Loop
void matrix_scan_user(void) {
-
- // Layer LED indicators
- uint32_t layer = layer_state;
-
- if (layer & (1<<1)) {
- xd60_wasd_leds_on();
- xd60_fn_led_on();
- xd60_esc_led_on();
- xd60_poker_leds_on();
- } else {
- xd60_wasd_leds_off();
- xd60_fn_led_off();
- xd60_esc_led_off();
- xd60_poker_leds_off();
- }
+ // Empty
};
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
/* XD60 LEDs
* GPIO pads
- * 0 F7 WASD LEDs
- * 1 F6 ESC LED
- * 2 F5 FN LED
- * 3 F4 POKER Arrow LEDs
+ * 0 F7 not connected
+ * 1 F6 RGB PWM Underglow
+ * 2 F5 Backlight LED
+ * 3 F4 not connected
* B2 Capslock LED
* B0 not connected
*/
inline void xd60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
-inline void xd60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); }
-inline void xd60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); }
-inline void xd60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); }
-inline void xd60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); }
+inline void xd60_bl_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); }
inline void xd60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
-inline void xd60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
-inline void xd60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
-inline void xd60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
-inline void xd60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
+inline void xd60_bl_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
/* XD60 Keymap Definition Macro */
#define KEYMAP( \
projects / qmk_firmware.git / commitdiff