@subsection Contexts explained
When music is printed, a lot of notational elements must be added to the
-input. For example, compare the input and output of the following example:
+output. For example, compare the input and output of the following example:
@lilypond[quote,verbatim,relative=2,fragment]
cis4 cis2. g4
all stems are thickened.
Analogous to @code{\set}, the @var{context} argument may be left out,
-causing it to default to @context{Voice}, and adding @code{\once} applies
-the change during one timestep only
+causing the default context @context{Voice} to be used. Adding
+@code{\once} applies the change during one timestep only.
@lilypond[quote,fragment,verbatim,relative=2]
c4
@}
@end example
-Here @code{\Staff} takes the existing definition for context @context{Staff} from the
-identifier @code{\Staff}.
+The @code{\Staff} command brings in the existing definition of the
+staff context so that it can be modified.
The statements
@example
@}
@end example
-In the following discussion, the example input shown should go on the
-@dots{} in the previous fragment.
+In the following discussion, the example input shown should go in place
+of the @dots{} in the previous fragment.
-First the context's name is defined. Instead of @context{Voice} it
-will be called @context{ImproVoice},
+First it is necessary to define a name for the new context:
@example
\name ImproVoice
\alias Voice
@end example
-The context will print notes, and instructive texts
+The context will print notes and instructive texts, so we need to add
+the engravers which provide this functionality,
@example
\consists Note_heads_engraver
\consists Text_engraver
@end example
-but only on the center line,
+but we only need this on the center line,
@example
\consists Pitch_squash_engraver
In the previous section, we have already touched on a command that
changes layout details: the @code{\override} command. In this section,
-we will look in more detail at how to use the command in practice.
+we will look in more detail at how to use the command in practice. The
+general syntax of this command is:
+@example
+\override @var{context}.@var{layout_object} #'@var{layout_property} = #@var{value}
+@end example
+
+This will set the @var{layout_property} of the specified @var{layout_object},
+which is a member of the @var{context}, to the @var{value}.
@menu
* Constructing a tweak::
@end example
@noindent
-This means that we must determine these bits of information:
+To construct this tweak we must determine these bits of information:
@itemize
@item the context: here @context{Voice}.
manual.
@end ignore
+@ifnothtml
+The programmer's reference is available as an HTML document. It is
+highly recommended that you read it in HTML form, either online or
+by downloading the HTML documentation. This section will be much more
+difficult to understand if you are using the
+PDF manual.
+@end ifnothtml
+
Follow the link to @internalsref{Fingering}. At the top of the
page, you will see
@internalsref{New_fingering_engraver}.
@end quotation
-By clicking around in the program reference, we can follow the
-flow of information within the program, following links like this:
+By following related links inside the program reference, we can follow the
+flow of information within the program:
@itemize @bullet
@end quotation
@noindent
-which means that the number will be kept at a distance of at least 0.6
+which means that the number will be kept at a distance of at least 0.5
of the note head.
@menu
* File structure (introduction)::
-* Multiple scores in a book::
-* Extracting fragments of notation::
* File structure::
* A single music expression::
+* Multiple scores in a book::
+* Extracting fragments of notation::
* Including LilyPond files::
* Text encoding::
@end menu
@noindent
will result in a parsing error. Instead, music should be inside other
expressions, which may be put in a file by themselves. Such
-expressions are called toplevel expressions. The next section enumerates
-them all.
-
-
-@node Multiple scores in a book
-@subsection Multiple scores in a book
-
-@funindex \book
-@cindex movements, multiple
-
-A document may contain multiple pieces of music and texts. Examples
-of these are an etude book, or an orchestral part with multiple
-movements. Each movement is entered with a @code{\score} block,
-
-@example
-\score @{
- @var{..music..}
-@}
-@end example
-
-and texts are entered with a @code{\markup} block,
-
-@example
-\markup @{
- @var{..text..}
-@}
-@end example
-
-@funindex \book
-
-All the movements and texts which appear in the same @code{.ly} file
-will normally be typeset in the form of a single output file.
-
-@example
-\score @{
- @var{..}
-@}
-\markup @{
- @var{..}
-@}
-\score @{
- @var{..}
-@}
-@end example
-
-However, if you want multiple output files from the same @code{.ly}
-file, then you can add multiple @code{\book} blocks, where each such
-@code{\book} block will result in a separate output. If you do not
-specify any @code{\book} block in the file, LilyPond will implicitly
-treat the full file as a single @code{\book} block, see @ref{File
-structure}. One important exception is within lilypond-book documents,
-where you explicitly have to add a @code{\book} block, otherwise only
-the first @code{\score} or @code{\markup} will appear in the output.
-
-The header for each piece of music can be put inside the @code{\score}
-block. The @code{piece} name from the header will be printed before
-each movement. The title for the entire book can be put inside the
-@code{\book}, but if it is not present, the @code{\header} which is at
-the top of the file is inserted.
-
-@example
-\header @{
- title = "Eight miniatures"
- composer = "Igor Stravinsky"
-@}
-\score @{
- @dots{}
- \header @{ piece = "Romanze" @}
-@}
-\markup @{
- ..text of second verse..
-@}
-\markup @{
- ..text of third verse..
-@}
-\score @{
- @dots{}
- \header @{ piece = "Menuetto" @}
-@}
-@end example
-
-@node Extracting fragments of notation
-@subsection Extracting fragments of notation
-
-It is possible to quote small fragments of a large score directly from
-the output. This can be compared to clipping a piece of a paper score
-with scissors.
-
-This is done by definining the measures that need to be cut out
-separately. For example, including the following definition
-
-
-@verbatim
-\layout {
- clip-regions
- = #(list
- (cons
- (make-rhythmic-location 5 1 2)
- (make-rhythmic-location 7 3 4)))
-}
-@end verbatim
-
-@noindent
-will extract a fragment starting halfway the fifth measure, ending in
-the seventh measure. The meaning of @code{5 1 2} is: after a 1/2 note
-in measure 5, and @code{7 3 4} after 3 quarter notes in measure 7.
-
-More clip regions can be defined by adding more pairs of
-rhythmic-locations to the list.
-
-In order to use this feature, LilyPond must be invoked with
-@code{-dclip-systems}. The clips are output as EPS files, and are
-converted to PDF and PNG if these formats are switched on as well.
-
-For more information on output formats, see @ref{Invoking lilypond}.
-
-@seealso
-
-Examples: @inputfileref{input/regression/,clip-systems.ly}
+expressions are called toplevel expressions; see @ref{File structure} for
+a list of all such expressions.
@node File structure
@end example
+@node Multiple scores in a book
+@subsection Multiple scores in a book
+
+@funindex \book
+@cindex movements, multiple
+
+A document may contain multiple pieces of music and texts. Examples
+of these are an etude book, or an orchestral part with multiple
+movements. Each movement is entered with a @code{\score} block,
+
+@example
+\score @{
+ @var{..music..}
+@}
+@end example
+
+and texts are entered with a @code{\markup} block,
+
+@example
+\markup @{
+ @var{..text..}
+@}
+@end example
+
+@funindex \book
+
+All the movements and texts which appear in the same @code{.ly} file
+will normally be typeset in the form of a single output file.
+
+@example
+\score @{
+ @var{..}
+@}
+\markup @{
+ @var{..}
+@}
+\score @{
+ @var{..}
+@}
+@end example
+
+However, if you want multiple output files from the same @code{.ly}
+file, then you can add multiple @code{\book} blocks, where each such
+@code{\book} block will result in a separate output. If you do not
+specify any @code{\book} block in the file, LilyPond will implicitly
+treat the full file as a single @code{\book} block, see @ref{File
+structure}. One important exception is within lilypond-book documents,
+where you explicitly have to add a @code{\book} block, otherwise only
+the first @code{\score} or @code{\markup} will appear in the output.
+
+The header for each piece of music can be put inside the @code{\score}
+block. The @code{piece} name from the header will be printed before
+each movement. The title for the entire book can be put inside the
+@code{\book}, but if it is not present, the @code{\header} which is at
+the top of the file is inserted.
+
+@example
+\header @{
+ title = "Eight miniatures"
+ composer = "Igor Stravinsky"
+@}
+\score @{
+ @dots{}
+ \header @{ piece = "Romanze" @}
+@}
+\markup @{
+ ..text of second verse..
+@}
+\markup @{
+ ..text of third verse..
+@}
+\score @{
+ @dots{}
+ \header @{ piece = "Menuetto" @}
+@}
+@end example
+
+@node Extracting fragments of notation
+@subsection Extracting fragments of notation
+
+It is possible to quote small fragments of a large score directly from
+the output. This can be compared to clipping a piece of a paper score
+with scissors.
+
+This is done by definining the measures that need to be cut out
+separately. For example, including the following definition
+
+
+@verbatim
+\layout {
+ clip-regions
+ = #(list
+ (cons
+ (make-rhythmic-location 5 1 2)
+ (make-rhythmic-location 7 3 4)))
+}
+@end verbatim
+
+@noindent
+will extract a fragment starting halfway the fifth measure, ending in
+the seventh measure. The meaning of @code{5 1 2} is: after a 1/2 note
+in measure 5, and @code{7 3 4} after 3 quarter notes in measure 7.
+
+More clip regions can be defined by adding more pairs of
+rhythmic-locations to the list.
+
+In order to use this feature, LilyPond must be invoked with
+@code{-dclip-systems}. The clips are output as EPS files, and are
+converted to PDF and PNG if these formats are switched on as well.
+
+For more information on output formats, see @ref{Invoking lilypond}.
+
+@seealso
+
+Examples: @inputfileref{input/regression/,clip-systems.ly}
+
+
@node Including LilyPond files
@subsection Including LilyPond files
@node Creating titles
@subsection Creating titles
-Titles are created for each @code{\score} block, and for the full input
-file (or @code{\book} block).
+Titles are created for each @code{\score} block, as well as for the full
+input file (or @code{\book} block).
The contents of the titles are taken from the @code{\header} blocks.
The header block for a book supports the following
projects / lilypond.git / commitdiff