+++ /dev/null
-#include QMK_KEYBOARD_H
-
-// These are all aliases for the function layers.
-#define _L0 0
-#define _L1 1
-#define _L2 2
-#define _L3 3
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_L0] = LAYOUT(
- KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \
- KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_L1), \
- KC_LCTL, KC_LGUI, KC_LALT, TG(_L3), KC_SPC, KC_SPC, MO(_L2), KC_RALT, KC_APP, KC_RCTRL), \
-
-[_L2] = LAYOUT(
- _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \
- KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \
- _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
-
-[_L1] = LAYOUT(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
- KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
- _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
-
-[_L3] = LAYOUT(
- _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, KC_0, KC_DOT, _______, _______, _______, RESET), \
-};
+++ /dev/null
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-#define _MA 0 //Main layer
-#define _FN 1 //Fn
-#define _FN1 2 //Fn1
-#define _PN 3 //Pn
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_MA] = LAYOUT(
- KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \
- KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_FN1), \
- KC_LCTL, KC_LGUI, KC_LALT, MO(_PN), KC_SPC, KC_SPC, MO(_FN), KC_RALT, KC_APP, KC_RCTRL), \
-
-[_FN] = LAYOUT(
- _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \
- KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \
- _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
-
-[_FN1] = LAYOUT(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
- KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
- _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
-
-[_PN] = LAYOUT(
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, \
- RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
-};
-
-void led_set_user(uint8_t usb_led) {
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
- // Turn capslock on
- PORTE &= ~(1 << 6);
-
-
- } else {
- // Turn capslock off
- PORTE |= (1 << 6);
- }
-}
-
+++ /dev/null
-This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-#define _MA 0 //Main layer
-#define _LO 1 //FN1
-#define _RA 2 //FN
-
-enum custom_keycodes {
- CTRLZ = SAFE_RANGE,
- CTRLX,
- CTRLC,
- CTRLV
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_MA] = LAYOUT(
- KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \
- KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
- KC_LCTL, KC_LGUI, KC_LALT, MO(_LO), KC_SPC, KC_SPC, MO(_RA), KC_RALT, KC_APP, KC_RCTRL), \
-
-[_LO] = LAYOUT(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
- KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
- _______, CTRLZ, CTRLX, CTRLC, CTRLV, _______, _______, KC_QUOT, KC_LBRC, KC_RBRC, KC_BSLS, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), \
-
-[_RA] = LAYOUT(
- _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, _______, _______, _______, \
- KC_CAPS, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_PSCR, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
-
-};
-
-void led_set_user(uint8_t usb_led) {
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
- // Turn capslock on
- PORTE &= ~(1 << 6);
- } else {
- // Turn capslock off
- PORTE |= (1 << 6);
- }
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- if (record->event.pressed) {
- switch(keycode) {
- case CTRLZ:
- SEND_STRING(SS_LCTRL("z"));
- return false;
- case CTRLX:
- SEND_STRING(SS_LCTRL("x"));
- return false;
- case CTRLC:
- SEND_STRING(SS_LCTRL("c"));
- return false;
- case CTRLV:
- SEND_STRING(SS_LCTRL("v"));
- return false;
- }
- }
- return true;
-};
+++ /dev/null
-This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.
+++ /dev/null
-# Atom47
-
-
-
-## Support
-Keyboard Maintainer: [Maarten Dekkers](https://github.com/maartenwut)
-Hardware Supported: Atom47 rev2/rev3
-Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221)
-
-
-## Features (rev3 and up)
-- QMK Firmware
-- 6 Underglow RGB leds
-- In-switch leds
-- Through-hole micro usb connector (less likely to break off!)
-- South facing leds for the QMX/Zealencio users
-- Multiple layouts
-- Easily reachable reset button under the spacebar
-- CapsLock indicator
-
-## Build
-To build the default keymap for the latest revision, simply run `make atom47:default`. Specifiy the revision like so: `make atom47/rev3:default`.
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
-
-
+++ /dev/null
-/*
-Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef REV2_CONFIG_H
-#define REV2_CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0003
-#define MANUFACTURER Vortex
-#define PRODUCT Core
-#define DESCRIPTION Atom47 PCB for the Vortex Core Rev.2
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 13
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS {B1,B2,B3,B7}
-#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
-#define UNUSED_PINS
-
-#define BACKLIGHT_PIN B6
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* Backlight configuration
- */
-#define BACKLIGHT_LEVELS 4
-
-#define RGB_DI_PIN D0 // The pin the LED strip is connected to
-#define RGBLED_NUM 1 // Number of LEDs in your strip
-
-#define QMK_ESC_OUTPUT D7 // usually COL
-#define QMK_ESC_INPUT B1 // usually ROW
-#define QMK_LED B6
-
-#endif
+++ /dev/null
-{
- "keyboard_name": "Atom47",
- "url": "https://atomkb.eu/atom47",
- "maintainer": "Maarten Dekkers",
- "width": 13,
- "height": 4,
- "layouts": {
- "LAYOUT": {
- "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}]
- }
- }
-}
+++ /dev/null
-# Atom47 rev2
-
-This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it.
-
-## Support
-Keyboard Maintainer: [Matthew Kerfoot](https://github.com/mkerfoot)
-Hardware Supported: Atom47 rev2
-Hardware Availability: None
-
-
-## Features
-- QMK Firmware
-- In-switch leds
-- Through-hole micro usb connector (less likely to break off!)
-- Easily reachable reset button under the spacebar
-- In-switch CapsLock indicator
-
-## Build
-To build the default keymap, simply run `make atom47/rev2:default`.
-
-For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`.
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+++ /dev/null
-#include "rev2.h"
-#include "led.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- matrix_init_user();
- led_init_ports();
-};
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
- matrix_scan_user();
-};
-
-void led_init_ports(void) {
- // * Set our LED pins as output
- DDRB &= ~(1<<5);
-
- //Set output high, so the capslock led is off
- PORTB |= (1 << 5);
-}
-
-void led_set_kb(uint8_t usb_led) {
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
- // Turn capslock on
- PORTF |= (1<<5);
- } else {
- // Turn capslock off
- PORTF &= ~(1<<5);
- }
- led_set_user(usb_led);
-}
+++ /dev/null
-#ifndef ATOM47_H
-#define ATOM47_H
-
-#include "quantum.h"
-
-// readability
-#define XXX KC_NO
-
-#define LAYOUT( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2c, \
- k30, k31, k32, k33, k34, k36, k38, k39, k3a, k3c \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
- {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
- {k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c} \
-}
-
-void matrix_init_user(void);
-void matrix_scan_user(void);
-
-#endif
+++ /dev/null
-
-NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
+++ /dev/null
-/*
-Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef REV3_CONFIG_H
-#define REV3_CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0003
-#define MANUFACTURER Vortex
-#define PRODUCT Core
-#define DESCRIPTION Atom47 PCB for the Vortex Core Rev.3
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 13
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS {B3,B2,B1,B0}
-#define MATRIX_COL_PINS {B7,F0,F1,F4,F6,D4,D6,D7,B4,B5,C6,C7,F7}
-#define UNUSED_PINS
-
-#define BACKLIGHT_PIN B6
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Backlight configuration
- */
-#define BACKLIGHT_LEVELS 4
-
-#define RGB_DI_PIN F5 // The pin the LED strip is connected to
-#define RGBLED_NUM 6 // Number of LEDs in your strip
-#define RGBLIGHT_ANIMATIONS
-#define QMK_ESC_OUTPUT B7 // usually COL
-#define QMK_ESC_INPUT B3 // usually ROW
-#define QMK_LED E6
-
-#endif
+++ /dev/null
-{
- "keyboard_name": "Atom47",
- "url": "https://atomkb.eu/atom47",
- "maintainer": "Maarten Dekkers",
- "width": 13,
- "height": 4,
- "layouts": {
- "LAYOUT": {
- "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}]
- }
- }
-}
+++ /dev/null
-#include "rev3.h"
-#include "led.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- matrix_init_user();
- led_init_ports();
-};
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
- matrix_scan_user();
-};
-
-void led_init_ports(void) {
- // * Set our LED pins as output
- DDRE |= (1 << 6);
-
- //Set output high, so the capslock led is off
- PORTE |= (1 << 6);
-}
-
-void led_set_kb(uint8_t usb_led) {
- led_set_user(usb_led);
-}
+++ /dev/null
-#ifndef ATOM47_REV3_H
-#define ATOM47_REV3_H
-
-#include "quantum.h"
-
-// readability
-#define XXX KC_NO
-
-#define LAYOUT( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \
- k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
- k30, k31, k32, k33, k35, k37, k39, k3a, k3b, k3c \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
- {k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \
- {k30, k31, k32, k33, XXX, k35, XXX, k37, XXX, k39, k3a, k3b, k3c} \
-}
-
-
-#endif
+++ /dev/null
-NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870)
+++ /dev/null
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-BOOTLOADER= qmk-dfu
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-
-DEFAULT_FOLDER = atom47/rev3
-
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// These are all aliases for the function layers.
+#define _L0 0
+#define _L1 1
+#define _L2 2
+#define _L3 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_L0] = LAYOUT(
+ KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_L1), \
+ KC_LCTL, KC_LGUI, KC_LALT, TG(_L3), KC_SPC, KC_SPC, MO(_L2), KC_RALT, KC_APP, KC_RCTRL), \
+
+[_L2] = LAYOUT(
+ _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \
+ KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \
+ _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
+
+[_L1] = LAYOUT(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
+ _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
+
+[_L3] = LAYOUT(
+ _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, KC_0, KC_DOT, _______, _______, _______, RESET), \
+};
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _MA 0 //Main layer
+#define _FN 1 //Fn
+#define _FN1 2 //Fn1
+#define _PN 3 //Pn
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = LAYOUT(
+ KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_FN1), \
+ KC_LCTL, KC_LGUI, KC_LALT, MO(_PN), KC_SPC, KC_SPC, MO(_FN), KC_RALT, KC_APP, KC_RCTRL), \
+
+[_FN] = LAYOUT(
+ _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \
+ KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \
+ _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
+
+[_FN1] = LAYOUT(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
+ _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
+
+[_PN] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, \
+ RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
+};
+
+void led_set_user(uint8_t usb_led) {
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // Turn capslock on
+ PORTE &= ~(1 << 6);
+
+
+ } else {
+ // Turn capslock off
+ PORTE |= (1 << 6);
+ }
+}
+
--- /dev/null
+This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _MA 0 //Main layer
+#define _LO 1 //FN1
+#define _RA 2 //FN
+
+enum custom_keycodes {
+ CTRLZ = SAFE_RANGE,
+ CTRLX,
+ CTRLC,
+ CTRLV
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = LAYOUT(
+ KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
+ KC_LCTL, KC_LGUI, KC_LALT, MO(_LO), KC_SPC, KC_SPC, MO(_RA), KC_RALT, KC_APP, KC_RCTRL), \
+
+[_LO] = LAYOUT(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
+ _______, CTRLZ, CTRLX, CTRLC, CTRLV, _______, _______, KC_QUOT, KC_LBRC, KC_RBRC, KC_BSLS, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), \
+
+[_RA] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, _______, _______, _______, \
+ KC_CAPS, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_PSCR, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
+
+};
+
+void led_set_user(uint8_t usb_led) {
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // Turn capslock on
+ PORTE &= ~(1 << 6);
+ } else {
+ // Turn capslock off
+ PORTE |= (1 << 6);
+ }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ if (record->event.pressed) {
+ switch(keycode) {
+ case CTRLZ:
+ SEND_STRING(SS_LCTRL("z"));
+ return false;
+ case CTRLX:
+ SEND_STRING(SS_LCTRL("x"));
+ return false;
+ case CTRLC:
+ SEND_STRING(SS_LCTRL("c"));
+ return false;
+ case CTRLV:
+ SEND_STRING(SS_LCTRL("v"));
+ return false;
+ }
+ }
+ return true;
+};
--- /dev/null
+This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.
--- /dev/null
+# Atom47
+
+
+
+## Support
+Keyboard Maintainer: [Maarten Dekkers](https://github.com/maartenwut)
+Hardware Supported: Atom47 rev2/rev3
+Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221)
+
+
+## Features (rev3 and up)
+- QMK Firmware
+- 6 Underglow RGB leds
+- In-switch leds
+- Through-hole micro usb connector (less likely to break off!)
+- South facing leds for the QMX/Zealencio users
+- Multiple layouts
+- Easily reachable reset button under the spacebar
+- CapsLock indicator
+
+## Build
+To build the default keymap for the latest revision, simply run `make atom47:default`. Specifiy the revision like so: `make atom47/rev3:default`.
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+
+
--- /dev/null
+/*
+Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV2_CONFIG_H
+#define REV2_CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0003
+#define MANUFACTURER Vortex
+#define PRODUCT Core
+#define DESCRIPTION Atom47 PCB for the Vortex Core Rev.2
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B1,B2,B3,B7}
+#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+#define RGB_DI_PIN D0 // The pin the LED strip is connected to
+#define RGBLED_NUM 1 // Number of LEDs in your strip
+
+#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_INPUT B1 // usually ROW
+#define QMK_LED B6
+
+#endif
--- /dev/null
+{
+ "keyboard_name": "Atom47",
+ "url": "https://atomkb.eu/atom47",
+ "maintainer": "Maarten Dekkers",
+ "width": 13,
+ "height": 4,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}]
+ }
+ }
+}
--- /dev/null
+# Atom47 rev2
+
+This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it.
+
+## Support
+Keyboard Maintainer: [Matthew Kerfoot](https://github.com/mkerfoot)
+Hardware Supported: Atom47 rev2
+Hardware Availability: None
+
+
+## Features
+- QMK Firmware
+- In-switch leds
+- Through-hole micro usb connector (less likely to break off!)
+- Easily reachable reset button under the spacebar
+- In-switch CapsLock indicator
+
+## Build
+To build the default keymap, simply run `make atom47/rev2:default`.
+
+For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`.
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
--- /dev/null
+#include "rev2.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ matrix_init_user();
+ led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+ matrix_scan_user();
+};
+
+void led_init_ports(void) {
+ // * Set our LED pins as output
+ DDRB &= ~(1<<5);
+
+ //Set output high, so the capslock led is off
+ PORTB |= (1 << 5);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // Turn capslock on
+ PORTF |= (1<<5);
+ } else {
+ // Turn capslock off
+ PORTF &= ~(1<<5);
+ }
+ led_set_user(usb_led);
+}
--- /dev/null
+#ifndef ATOM47_H
+#define ATOM47_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define LAYOUT( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2c, \
+ k30, k31, k32, k33, k34, k36, k38, k39, k3a, k3c \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
+ {k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c} \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
--- /dev/null
+
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
--- /dev/null
+/*
+Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV3_CONFIG_H
+#define REV3_CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0003
+#define MANUFACTURER Vortex
+#define PRODUCT Core
+#define DESCRIPTION Atom47 PCB for the Vortex Core Rev.3
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B3,B2,B1,B0}
+#define MATRIX_COL_PINS {B7,F0,F1,F4,F6,D4,D6,D7,B4,B5,C6,C7,F7}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+#define RGB_DI_PIN F5 // The pin the LED strip is connected to
+#define RGBLED_NUM 6 // Number of LEDs in your strip
+#define RGBLIGHT_ANIMATIONS
+#define QMK_ESC_OUTPUT B7 // usually COL
+#define QMK_ESC_INPUT B3 // usually ROW
+#define QMK_LED E6
+
+#endif
--- /dev/null
+{
+ "keyboard_name": "Atom47",
+ "url": "https://atomkb.eu/atom47",
+ "maintainer": "Maarten Dekkers",
+ "width": 13,
+ "height": 4,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}]
+ }
+ }
+}
--- /dev/null
+#include "rev3.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ matrix_init_user();
+ led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+ matrix_scan_user();
+};
+
+void led_init_ports(void) {
+ // * Set our LED pins as output
+ DDRE |= (1 << 6);
+
+ //Set output high, so the capslock led is off
+ PORTE |= (1 << 6);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ led_set_user(usb_led);
+}
--- /dev/null
+#ifndef ATOM47_REV3_H
+#define ATOM47_REV3_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define LAYOUT( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \
+ k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
+ k30, k31, k32, k33, k35, k37, k39, k3a, k3b, k3c \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
+ {k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \
+ {k30, k31, k32, k33, XXX, k35, XXX, k37, XXX, k39, k3a, k3b, k3c} \
+}
+
+
+#endif
--- /dev/null
+NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870)
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+BOOTLOADER= qmk-dfu
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+
+DEFAULT_FOLDER = atom47/rev3
+
--- /dev/null
+/*
+Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4705
+#define PRODUCT_ID 0x0160
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Maartenwut
+#define PRODUCT Plain60
+#define DESCRIPTION A plain 60% PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B4,D7,D6,D4,E6}
+#define MATRIX_COL_PINS {D2,D1,D0,D3,D5,B5,F0,B6,C6,C7,F1,F4,F5,F6,F7}
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+#define QMK_ESC_OUTPUT D2 // usually COL
+#define QMK_ESC_INPUT B4 // usually ROW
+
+//VIA
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Dynamic keymap starts after EEPROM version
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 635
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 389 // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
--- /dev/null
+{
+ "keyboard_name": "Plain60",
+ "url": "",
+ "maintainer": "maartenwut",
+ "width": 15,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 65,
+ "layout": [
+ {"label":"k00", "x":0, "y":0},
+ {"label":"k01", "x":1, "y":0},
+ {"label":"k02", "x":2, "y":0},
+ {"label":"k03", "x":3, "y":0},
+ {"label":"k04", "x":4, "y":0},
+ {"label":"k05", "x":5, "y":0},
+ {"label":"k06", "x":6, "y":0},
+ {"label":"k07", "x":7, "y":0},
+ {"label":"k08", "x":8, "y":0},
+ {"label":"k09", "x":9, "y":0},
+ {"label":"k0a", "x":10, "y":0},
+ {"label":"k0b", "x":11, "y":0},
+ {"label":"k0c", "x":12, "y":0},
+ {"label":"k0d", "x":13, "y":0},
+ {"label":"k0e", "x":14, "y":0},
+ {"label":"k10", "x":0, "y":1, "w":1.5},
+ {"label":"k11", "x":1.5, "y":1},
+ {"label":"k12", "x":2.5, "y":1},
+ {"label":"k13", "x":3.5, "y":1},
+ {"label":"k14", "x":4.5, "y":1},
+ {"label":"k15", "x":5.5, "y":1},
+ {"label":"k16", "x":6.5, "y":1},
+ {"label":"k17", "x":7.5, "y":1},
+ {"label":"k18", "x":8.5, "y":1},
+ {"label":"k19", "x":9.5, "y":1},
+ {"label":"k1a", "x":10.5, "y":1},
+ {"label":"k1b", "x":11.5, "y":1},
+ {"label":"k1c", "x":12.5, "y":1},
+ {"label":"k1d", "x":13.5, "y":1, "w":1.5},
+ {"label":"k20", "x":0, "y":2, "w":1.75},
+ {"label":"k21", "x":1.75, "y":2},
+ {"label":"k22", "x":2.75, "y":2},
+ {"label":"k23", "x":3.75, "y":2},
+ {"label":"k24", "x":4.75, "y":2},
+ {"label":"k25", "x":5.75, "y":2},
+ {"label":"k26", "x":6.75, "y":2},
+ {"label":"k27", "x":7.75, "y":2},
+ {"label":"k28", "x":8.75, "y":2},
+ {"label":"k29", "x":9.75, "y":2},
+ {"label":"k2a", "x":10.75, "y":2},
+ {"label":"k2b", "x":11.75, "y":2},
+ {"label":"k2c", "x":12.75, "y":2},
+ {"label":"k2d", "x":13.75, "y":2, "w":1.25},
+ {"label":"k30", "x":0, "y":3, "w":1.25},
+ {"label":"k31", "x":1.25, "y":3},
+ {"label":"k32", "x":2.25, "y":3},
+ {"label":"k33", "x":3.25, "y":3},
+ {"label":"k34", "x":4.25, "y":3},
+ {"label":"k35", "x":5.25, "y":3},
+ {"label":"k36", "x":6.25, "y":3},
+ {"label":"k37", "x":7.25, "y":3},
+ {"label":"k38", "x":8.25, "y":3},
+ {"label":"k39", "x":9.25, "y":3},
+ {"label":"k3a", "x":10.25, "y":3},
+ {"label":"k3b", "x":11.25, "y":3},
+ {"label":"k3c", "x":12.25, "y":3, "w":1.75},
+ {"label":"k3d", "x":14, "y":3},
+ {"label":"k40", "x":0, "y":4, "w":1.25},
+ {"label":"k41", "x":1.25, "y":4, "w":1.25},
+ {"label":"k42", "x":2.5, "y":4, "w":1.25},
+ {"label":"k46", "x":3.75, "y":4, "w":6.25},
+ {"label":"k4a", "x":10, "y":4, "w":1.25},
+ {"label":"k4b", "x":11.25, "y":4, "w":1.25},
+ {"label":"k4c", "x":12.5, "y":4, "w":1.25},
+ {"label":"k4d", "x":13.75, "y":4, "w":1.25}
+ ]
+ },
+ "LAYOUT_60_ansi": {
+ "key_count": 61,
+ "layout": [
+ {"label":"k00", "x":0, "y":0},
+ {"label":"k01", "x":1, "y":0},
+ {"label":"k02", "x":2, "y":0},
+ {"label":"k03", "x":3, "y":0},
+ {"label":"k04", "x":4, "y":0},
+ {"label":"k05", "x":5, "y":0},
+ {"label":"k06", "x":6, "y":0},
+ {"label":"k07", "x":7, "y":0},
+ {"label":"k08", "x":8, "y":0},
+ {"label":"k09", "x":9, "y":0},
+ {"label":"k0a", "x":10, "y":0},
+ {"label":"k0b", "x":11, "y":0},
+ {"label":"k0c", "x":12, "y":0},
+ {"label":"k0e", "x":13, "y":0, "w":2},
+ {"label":"k10", "x":0, "y":1, "w":1.5},
+ {"label":"k11", "x":1.5, "y":1},
+ {"label":"k12", "x":2.5, "y":1},
+ {"label":"k13", "x":3.5, "y":1},
+ {"label":"k14", "x":4.5, "y":1},
+ {"label":"k15", "x":5.5, "y":1},
+ {"label":"k16", "x":6.5, "y":1},
+ {"label":"k17", "x":7.5, "y":1},
+ {"label":"k18", "x":8.5, "y":1},
+ {"label":"k19", "x":9.5, "y":1},
+ {"label":"k1a", "x":10.5, "y":1},
+ {"label":"k1b", "x":11.5, "y":1},
+ {"label":"k1c", "x":12.5, "y":1},
+ {"label":"k1d", "x":13.5, "y":1, "w":1.5},
+ {"label":"k20", "x":0, "y":2, "w":1.75},
+ {"label":"k21", "x":1.75, "y":2},
+ {"label":"k22", "x":2.75, "y":2},
+ {"label":"k23", "x":3.75, "y":2},
+ {"label":"k24", "x":4.75, "y":2},
+ {"label":"k25", "x":5.75, "y":2},
+ {"label":"k26", "x":6.75, "y":2},
+ {"label":"k27", "x":7.75, "y":2},
+ {"label":"k28", "x":8.75, "y":2},
+ {"label":"k29", "x":9.75, "y":2},
+ {"label":"k2a", "x":10.75, "y":2},
+ {"label":"k2b", "x":11.75, "y":2},
+ {"label":"k2d", "x":12.75, "y":2, "w":2.25},
+ {"label":"k30", "x":0, "y":3, "w":2.25},
+ {"label":"k32", "x":2.25, "y":3},
+ {"label":"k33", "x":3.25, "y":3},
+ {"label":"k34", "x":4.25, "y":3},
+ {"label":"k35", "x":5.25, "y":3},
+ {"label":"k36", "x":6.25, "y":3},
+ {"label":"k37", "x":7.25, "y":3},
+ {"label":"k38", "x":8.25, "y":3},
+ {"label":"k39", "x":9.25, "y":3},
+ {"label":"k3a", "x":10.25, "y":3},
+ {"label":"k3b", "x":11.25, "y":3},
+ {"label":"k3c", "x":12.25, "y":3, "w":2.75},
+ {"label":"k40", "x":0, "y":4, "w":1.25},
+ {"label":"k41", "x":1.25, "y":4, "w":1.25},
+ {"label":"k42", "x":2.5, "y":4, "w":1.25},
+ {"label":"k46", "x":3.75, "y":4, "w":6.25},
+ {"label":"k4a", "x":10, "y":4, "w":1.25},
+ {"label":"k4b", "x":11.25, "y":4, "w":1.25},
+ {"label":"k4c", "x":12.5, "y":4, "w":1.25},
+ {"label":"k4d", "x":13.75, "y":4, "w":1.25}
+ ]
+ },
+ "LAYOUT_60_ansi_split_bs_rshift": {
+ "key_count": 63,
+ "layout": [
+ {"label":"k00", "x":0, "y":0},
+ {"label":"k01", "x":1, "y":0},
+ {"label":"k02", "x":2, "y":0},
+ {"label":"k03", "x":3, "y":0},
+ {"label":"k04", "x":4, "y":0},
+ {"label":"k05", "x":5, "y":0},
+ {"label":"k06", "x":6, "y":0},
+ {"label":"k07", "x":7, "y":0},
+ {"label":"k08", "x":8, "y":0},
+ {"label":"k09", "x":9, "y":0},
+ {"label":"k0a", "x":10, "y":0},
+ {"label":"k0b", "x":11, "y":0},
+ {"label":"k0c", "x":12, "y":0},
+ {"label":"k0d", "x":13, "y":0},
+ {"label":"k0e", "x":14, "y":0},
+ {"label":"k10", "x":0, "y":1, "w":1.5},
+ {"label":"k11", "x":1.5, "y":1},
+ {"label":"k12", "x":2.5, "y":1},
+ {"label":"k13", "x":3.5, "y":1},
+ {"label":"k14", "x":4.5, "y":1},
+ {"label":"k15", "x":5.5, "y":1},
+ {"label":"k16", "x":6.5, "y":1},
+ {"label":"k17", "x":7.5, "y":1},
+ {"label":"k18", "x":8.5, "y":1},
+ {"label":"k19", "x":9.5, "y":1},
+ {"label":"k1a", "x":10.5, "y":1},
+ {"label":"k1b", "x":11.5, "y":1},
+ {"label":"k1c", "x":12.5, "y":1},
+ {"label":"k1d", "x":13.5, "y":1, "w":1.5},
+ {"label":"k20", "x":0, "y":2, "w":1.75},
+ {"label":"k21", "x":1.75, "y":2},
+ {"label":"k22", "x":2.75, "y":2},
+ {"label":"k23", "x":3.75, "y":2},
+ {"label":"k24", "x":4.75, "y":2},
+ {"label":"k25", "x":5.75, "y":2},
+ {"label":"k26", "x":6.75, "y":2},
+ {"label":"k27", "x":7.75, "y":2},
+ {"label":"k28", "x":8.75, "y":2},
+ {"label":"k29", "x":9.75, "y":2},
+ {"label":"k2a", "x":10.75, "y":2},
+ {"label":"k2b", "x":11.75, "y":2},
+ {"label":"k2d", "x":12.75, "y":2, "w":2.25},
+ {"label":"k30", "x":0, "y":3, "w":2.25},
+ {"label":"k32", "x":2.25, "y":3},
+ {"label":"k33", "x":3.25, "y":3},
+ {"label":"k34", "x":4.25, "y":3},
+ {"label":"k35", "x":5.25, "y":3},
+ {"label":"k36", "x":6.25, "y":3},
+ {"label":"k37", "x":7.25, "y":3},
+ {"label":"k38", "x":8.25, "y":3},
+ {"label":"k39", "x":9.25, "y":3},
+ {"label":"k3a", "x":10.25, "y":3},
+ {"label":"k3b", "x":11.25, "y":3},
+ {"label":"k3c", "x":12.25, "y":3, "w":1.75},
+ {"label":"k3d", "x":14, "y":3},
+ {"label":"k40", "x":0, "y":4, "w":1.25},
+ {"label":"k41", "x":1.25, "y":4, "w":1.25},
+ {"label":"k42", "x":2.5, "y":4, "w":1.25},
+ {"label":"k46", "x":3.75, "y":4, "w":6.25},
+ {"label":"k4a", "x":10, "y":4, "w":1.25},
+ {"label":"k4b", "x":11.25, "y":4, "w":1.25},
+ {"label":"k4c", "x":12.5, "y":4, "w":1.25},
+ {"label":"k4d", "x":13.75, "y":4, "w":1.25}
+ ]
+ },
+ "LAYOUT_60_hhkb": {
+ "key_count": 60,
+ "layout": [
+ {"label":"k00", "x":0, "y":0},
+ {"label":"k01", "x":1, "y":0},
+ {"label":"k02", "x":2, "y":0},
+ {"label":"k03", "x":3, "y":0},
+ {"label":"k04", "x":4, "y":0},
+ {"label":"k05", "x":5, "y":0},
+ {"label":"k06", "x":6, "y":0},
+ {"label":"k07", "x":7, "y":0},
+ {"label":"k08", "x":8, "y":0},
+ {"label":"k09", "x":9, "y":0},
+ {"label":"k0a", "x":10, "y":0},
+ {"label":"k0b", "x":11, "y":0},
+ {"label":"k0c", "x":12, "y":0},
+ {"label":"k0d", "x":13, "y":0},
+ {"label":"k0e", "x":14, "y":0},
+ {"label":"k10", "x":0, "y":1, "w":1.5},
+ {"label":"k11", "x":1.5, "y":1},
+ {"label":"k12", "x":2.5, "y":1},
+ {"label":"k13", "x":3.5, "y":1},
+ {"label":"k14", "x":4.5, "y":1},
+ {"label":"k15", "x":5.5, "y":1},
+ {"label":"k16", "x":6.5, "y":1},
+ {"label":"k17", "x":7.5, "y":1},
+ {"label":"k18", "x":8.5, "y":1},
+ {"label":"k19", "x":9.5, "y":1},
+ {"label":"k1a", "x":10.5, "y":1},
+ {"label":"k1b", "x":11.5, "y":1},
+ {"label":"k1c", "x":12.5, "y":1},
+ {"label":"k1d", "x":13.5, "y":1, "w":1.5},
+ {"label":"k20", "x":0, "y":2, "w":1.75},
+ {"label":"k21", "x":1.75, "y":2},
+ {"label":"k22", "x":2.75, "y":2},
+ {"label":"k23", "x":3.75, "y":2},
+ {"label":"k24", "x":4.75, "y":2},
+ {"label":"k25", "x":5.75, "y":2},
+ {"label":"k26", "x":6.75, "y":2},
+ {"label":"k27", "x":7.75, "y":2},
+ {"label":"k28", "x":8.75, "y":2},
+ {"label":"k29", "x":9.75, "y":2},
+ {"label":"k2a", "x":10.75, "y":2},
+ {"label":"k2b", "x":11.75, "y":2},
+ {"label":"k2d", "x":12.75, "y":2, "w":2.25},
+ {"label":"k30", "x":0, "y":3, "w":2.25},
+ {"label":"k32", "x":2.25, "y":3},
+ {"label":"k33", "x":3.25, "y":3},
+ {"label":"k34", "x":4.25, "y":3},
+ {"label":"k35", "x":5.25, "y":3},
+ {"label":"k36", "x":6.25, "y":3},
+ {"label":"k37", "x":7.25, "y":3},
+ {"label":"k38", "x":8.25, "y":3},
+ {"label":"k39", "x":9.25, "y":3},
+ {"label":"k3a", "x":10.25, "y":3},
+ {"label":"k3b", "x":11.25, "y":3},
+ {"label":"k3c", "x":12.25, "y":3, "w":1.75},
+ {"label":"k3d", "x":14, "y":3},
+ {"label":"k41", "x":1.5, "y":4},
+ {"label":"k42", "x":2.5, "y":4, "w":1.5},
+ {"label":"k46", "x":4, "y":4, "w":7},
+ {"label":"k4b", "x":11, "y":4, "w":1.5},
+ {"label":"k4c", "x":12.5, "y":4}
+ ]
+ },
+ "LAYOUT_60_iso": {
+ "key_count": 62,
+ "layout": [
+ {"label":"k00", "x":0, "y":0},
+ {"label":"k01", "x":1, "y":0},
+ {"label":"k02", "x":2, "y":0},
+ {"label":"k03", "x":3, "y":0},
+ {"label":"k04", "x":4, "y":0},
+ {"label":"k05", "x":5, "y":0},
+ {"label":"k06", "x":6, "y":0},
+ {"label":"k07", "x":7, "y":0},
+ {"label":"k08", "x":8, "y":0},
+ {"label":"k09", "x":9, "y":0},
+ {"label":"k0a", "x":10, "y":0},
+ {"label":"k0b", "x":11, "y":0},
+ {"label":"k0c", "x":12, "y":0},
+ {"label":"k0e", "x":13, "y":0, "w":2},
+ {"label":"k10", "x":0, "y":1, "w":1.5},
+ {"label":"k11", "x":1.5, "y":1},
+ {"label":"k12", "x":2.5, "y":1},
+ {"label":"k13", "x":3.5, "y":1},
+ {"label":"k14", "x":4.5, "y":1},
+ {"label":"k15", "x":5.5, "y":1},
+ {"label":"k16", "x":6.5, "y":1},
+ {"label":"k17", "x":7.5, "y":1},
+ {"label":"k18", "x":8.5, "y":1},
+ {"label":"k19", "x":9.5, "y":1},
+ {"label":"k1a", "x":10.5, "y":1},
+ {"label":"k1b", "x":11.5, "y":1},
+ {"label":"k1c", "x":12.5, "y":1},
+ {"label":"k20", "x":0, "y":2, "w":1.75},
+ {"label":"k21", "x":1.75, "y":2},
+ {"label":"k22", "x":2.75, "y":2},
+ {"label":"k23", "x":3.75, "y":2},
+ {"label":"k24", "x":4.75, "y":2},
+ {"label":"k25", "x":5.75, "y":2},
+ {"label":"k26", "x":6.75, "y":2},
+ {"label":"k27", "x":7.75, "y":2},
+ {"label":"k28", "x":8.75, "y":2},
+ {"label":"k29", "x":9.75, "y":2},
+ {"label":"k2a", "x":10.75, "y":2},
+ {"label":"k2b", "x":11.75, "y":2},
+ {"label":"k2c", "x":12.75, "y":2},
+ {"label":"k2d", "x":13.75, "y":1, "w":1.25, "h":2},
+ {"label":"k30", "x":0, "y":3, "w":1.25},
+ {"label":"k31", "x":1.25, "y":3},
+ {"label":"k32", "x":2.25, "y":3},
+ {"label":"k33", "x":3.25, "y":3},
+ {"label":"k34", "x":4.25, "y":3},
+ {"label":"k35", "x":5.25, "y":3},
+ {"label":"k36", "x":6.25, "y":3},
+ {"label":"k37", "x":7.25, "y":3},
+ {"label":"k38", "x":8.25, "y":3},
+ {"label":"k39", "x":9.25, "y":3},
+ {"label":"k3a", "x":10.25, "y":3},
+ {"label":"k3b", "x":11.25, "y":3},
+ {"label":"k3c", "x":12.25, "y":3, "w":2.75},
+ {"label":"k40", "x":0, "y":4, "w":1.25},
+ {"label":"k41", "x":1.25, "y":4, "w":1.25},
+ {"label":"k42", "x":2.5, "y":4, "w":1.25},
+ {"label":"k46", "x":3.75, "y":4, "w":6.25},
+ {"label":"k4a", "x":10, "y":4, "w":1.25},
+ {"label":"k4b", "x":11.25, "y":4, "w":1.25},
+ {"label":"k4c", "x":12.5, "y":4, "w":1.25},
+ {"label":"k4d", "x":13.75, "y":4, "w":1.25}
+ ]
+ },
+ "LAYOUT_60_iso_split_bs_rshift": {
+ "key_count": 64,
+ "layout": [
+ {"label":"k00", "x":0, "y":0},
+ {"label":"k01", "x":1, "y":0},
+ {"label":"k02", "x":2, "y":0},
+ {"label":"k03", "x":3, "y":0},
+ {"label":"k04", "x":4, "y":0},
+ {"label":"k05", "x":5, "y":0},
+ {"label":"k06", "x":6, "y":0},
+ {"label":"k07", "x":7, "y":0},
+ {"label":"k08", "x":8, "y":0},
+ {"label":"k09", "x":9, "y":0},
+ {"label":"k0a", "x":10, "y":0},
+ {"label":"k0b", "x":11, "y":0},
+ {"label":"k0c", "x":12, "y":0},
+ {"label":"k0d", "x":13, "y":0},
+ {"label":"k0e", "x":14, "y":0},
+ {"label":"k10", "x":0, "y":1, "w":1.5},
+ {"label":"k11", "x":1.5, "y":1},
+ {"label":"k12", "x":2.5, "y":1},
+ {"label":"k13", "x":3.5, "y":1},
+ {"label":"k14", "x":4.5, "y":1},
+ {"label":"k15", "x":5.5, "y":1},
+ {"label":"k16", "x":6.5, "y":1},
+ {"label":"k17", "x":7.5, "y":1},
+ {"label":"k18", "x":8.5, "y":1},
+ {"label":"k19", "x":9.5, "y":1},
+ {"label":"k1a", "x":10.5, "y":1},
+ {"label":"k1b", "x":11.5, "y":1},
+ {"label":"k1c", "x":12.5, "y":1},
+ {"label":"k20", "x":0, "y":2, "w":1.75},
+ {"label":"k21", "x":1.75, "y":2},
+ {"label":"k22", "x":2.75, "y":2},
+ {"label":"k23", "x":3.75, "y":2},
+ {"label":"k24", "x":4.75, "y":2},
+ {"label":"k25", "x":5.75, "y":2},
+ {"label":"k26", "x":6.75, "y":2},
+ {"label":"k27", "x":7.75, "y":2},
+ {"label":"k28", "x":8.75, "y":2},
+ {"label":"k29", "x":9.75, "y":2},
+ {"label":"k2a", "x":10.75, "y":2},
+ {"label":"k2b", "x":11.75, "y":2},
+ {"label":"k2c", "x":12.75, "y":2},
+ {"label":"k2d", "x":13.75, "y":1, "w":1.25, "h":2},
+ {"label":"k30", "x":0, "y":3, "w":1.25},
+ {"label":"k31", "x":1.25, "y":3},
+ {"label":"k32", "x":2.25, "y":3},
+ {"label":"k33", "x":3.25, "y":3},
+ {"label":"k34", "x":4.25, "y":3},
+ {"label":"k35", "x":5.25, "y":3},
+ {"label":"k36", "x":6.25, "y":3},
+ {"label":"k37", "x":7.25, "y":3},
+ {"label":"k38", "x":8.25, "y":3},
+ {"label":"k39", "x":9.25, "y":3},
+ {"label":"k3a", "x":10.25, "y":3},
+ {"label":"k3b", "x":11.25, "y":3},
+ {"label":"k3c", "x":12.25, "y":3, "w":1.75},
+ {"label":"k3d", "x":14, "y":3},
+ {"label":"k40", "x":0, "y":4, "w":1.25},
+ {"label":"k41", "x":1.25, "y":4, "w":1.25},
+ {"label":"k42", "x":2.5, "y":4, "w":1.25},
+ {"label":"k46", "x":3.75, "y":4, "w":6.25},
+ {"label":"k4a", "x":10, "y":4, "w":1.25},
+ {"label":"k4b", "x":11.25, "y":4, "w":1.25},
+ {"label":"k4c", "x":12.5, "y":4, "w":1.25},
+ {"label":"k4d", "x":13.75, "y":4, "w":1.25}
+ ]
+ }
+ }
+}
--- /dev/null
+/*
+Copyright 2019 Sebastian Spindler <sebastian.spindler@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* RGB Underglow */
+#define RGB_DI_PIN B7
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 30 // Number of LEDs
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
--- /dev/null
+/*
+Copyright 2019 Sebastian Spindler <sebastian.spindler@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+#include "keymap_extras/keymap_german.h"
+
+//Layer renaming
+#define _DL 0 //default
+#define _FUN 1 //function layer
+#define _LED 2 //LED configurations
+
+//Keymapping renaming
+#define ______ KC_TRNS //renaming KC_TRNS for readability in keymaps
+#define RGB_MI RGB_MODE_FORWARD //increase RGB mode
+#define RGB_MD RGB_MODE_REVERSE //decrease RGB mode
+#define RGB_ST RGB_M_P //rgb static
+#define MONKEY LCTL(LALT(KC_DEL)) //ctrl+alt+del == monkey grip
+#define SPECIAL LT(_FUN, DE_CIRC) //
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_DL] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, DE_SS, DE_ACUT, ______, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, DE_Z, KC_U, KC_I, KC_O, KC_P, DE_UE, DE_PLUS, ______, \
+ SPECIAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, DE_OE, DE_AE, DE_HASH, KC_ENT, \
+ KC_LSFT, DE_LESS, DE_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, DE_MINS, KC_RSFT, MONKEY, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC , ______, KC_ALGR, TG(_LED), KC_RCTL ),
+
+ [_FUN] = LAYOUT(
+ ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ______, KC_DEL, \
+ ______, KC_PGUP, KC_UP, KC_PGDN, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, KC_LEFT, KC_DOWN, KC_RIGHT, KC_HOME, ______, ______, KC_END, ______, ______, ______, ______, ______, ______, \
+ ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_UP, ______, \
+ ______, ______, ______, ______ , ______, KC_LEFT, KC_DOWN, KC_RIGHT ),
+
+ [_LED] = LAYOUT(
+ ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, RESET, \
+ ______, RGB_TOG, RGB_MI, RGB_MD, RGB_ST, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, ______, RGB_VAI, RGB_VAD, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
+ ______, ______, ______, ______ , ______, ______, TG(_LED), ______ ),
+};
--- /dev/null
+#Copyright 2019 Sebastian Spindler <sebastian.spindler@gmail.com>
+
+#This program is free software: you can redistribute it and/or modify
+#it under the terms of the GNU General Public License as published by
+#the Free Software Foundation, either version 2 of the License, or
+#(at your option) any later version.
+
+#This program is distributed in the hope that it will be useful,
+#but WITHOUT ANY WARRANTY; without even the implied warranty of
+#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#GNU General Public License for more details.
+
+#You should have received a copy of the GNU General Public License
+#along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870)
+RAW_ENABLE = no
+DYNAMIC_KEYMAP_ENABLE = no
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _MA 0
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL)
+};
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _MA 0
+#define _FN 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_FN] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, \
+ _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, \
+ KC_CAPS, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______),
+
+[_MA] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ LCTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \
+ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN) , \
+ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_RGUI, KC_RALT, KC_RCTRL)
+};
--- /dev/null
+- Disable VIA
+- Tsangan bottom row
+- Split Backspace
+- Split Right shift
+- RESET, F keys, and Cursors (WASD), DEL, Capslock on layer
+- Capslock -> LCTL_T(KC_ESC)
+- Bootmagic lite
+- Command enabled
+- Console enabled
--- /dev/null
+BOOTMAGIC = lite
+DYNAMIC_KEYMAP_ENABLE = no
+CONSOLE_ENABLE = yes
+COMMAND_ENABLE = yes
--- /dev/null
+#include "plain60.h"
--- /dev/null
+#pragma once
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define LAYOUT( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+ k40, k41, k42, k46, k4a, k4b, k4c, k4d \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX}, \
+ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX}, \
+ {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \
+}
+
+#define LAYOUT_60_ansi( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
+ k40, k41, k42, k46, k4a, k4b, k4c, k4d \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, XXX}, \
+ {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX, XXX}, \
+ {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \
+}
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+ k40, k41, k42, k46, k4a, k4b, k4c, k4d \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, XXX}, \
+ {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX, XXX}, \
+ {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \
+}
+
+#define LAYOUT_60_hhkb( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+ k41, k42, k46, k4b, k4c \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, XXX}, \
+ {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX, XXX}, \
+ {XXX, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4b, k4c, XXX, XXX} \
+}
+
+#define LAYOUT_60_iso( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
+ k40, k41, k42, k46, k4a, k4b, k4c, k4d \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, XXX}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX}, \
+ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX, XXX}, \
+ {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \
+}
+
+#define LAYOUT_60_iso_split_bs_rshift( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+ k40, k41, k42, k46, k4a, k4b, k4c, k4d \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, XXX}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX}, \
+ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX}, \
+ {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
--- /dev/null
+Plain60-C and Plain60-B
+======
+
+A plain 60% PCB with USB-C.
+
+Keyboard Maintainer: Maartenwut
+Hardware Supported: Plain60-C and Plain60-B
+Hardware Availability: https://github.com/Maartenwut/plain60-c
+
+Make example for this keyboard (after setting up your build environment):
+
+ make plain60:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+SRC += keyboards/wilba_tech/wt_main.c
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+
+LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_iso
--- /dev/null
+/*
+Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4705
+#define PRODUCT_ID 0x7465
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Maartenwut
+#define PRODUCT TA-65
+#define DESCRIPTION A universal 65% PCB with underglow.
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B4,D7,D6,D4,B3}
+#define MATRIX_COL_PINS {D2,D1,D0,D3,D5,C7,C6,B6,B5,F0,F1,F4,F5,F6,F7,B0}
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Backlight configuration
+ */
+#define RGB_DI_PIN E6
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 8
+
+#define QMK_ESC_OUTPUT D2 // usually COL
+#define QMK_ESC_INPUT B4 // usually ROW
+#define QMK_LED E6
--- /dev/null
+{
+ "keyboard_name": "ta65",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 16,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [
+ {"label":"Esc", "x":0, "y":0},
+ {"label":"!", "x":1, "y":0},
+ {"label":"@", "x":2, "y":0},
+ {"label":"#", "x":3, "y":0},
+ {"label":"$", "x":4, "y":0},
+ {"label":"%", "x":5, "y":0},
+ {"label":"^", "x":6, "y":0},
+ {"label":"&", "x":7, "y":0},
+ {"label":"*", "x":8, "y":0},
+ {"label":"(", "x":9, "y":0},
+ {"label":")", "x":10, "y":0},
+ {"label":"_", "x":11, "y":0},
+ {"label":"+", "x":12, "y":0},
+ {"label":"|", "x":13, "y":0},
+ {"label":"Backspace", "x":14, "y":0},
+ {"label":"~", "x":15, "y":0},
+ {"label":"Tab", "x":0, "y":1, "w":1.5},
+ {"label":"Q", "x":1.5, "y":1},
+ {"label":"W", "x":2.5, "y":1},
+ {"label":"E", "x":3.5, "y":1},
+ {"label":"R", "x":4.5, "y":1},
+ {"label":"T", "x":5.5, "y":1},
+ {"label":"Y", "x":6.5, "y":1},
+ {"label":"U", "x":7.5, "y":1},
+ {"label":"I", "x":8.5, "y":1},
+ {"label":"O", "x":9.5, "y":1},
+ {"label":"P", "x":10.5, "y":1},
+ {"label":"{", "x":11.5, "y":1},
+ {"label":"}", "x":12.5, "y":1},
+ {"label":"|", "x":13.5, "y":1, "w":1.5},
+ {"label":"Delete", "x":15, "y":1},
+ {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+ {"label":"A", "x":1.75, "y":2},
+ {"label":"S", "x":2.75, "y":2},
+ {"label":"D", "x":3.75, "y":2},
+ {"label":"F", "x":4.75, "y":2},
+ {"label":"G", "x":5.75, "y":2},
+ {"label":"H", "x":6.75, "y":2},
+ {"label":"J", "x":7.75, "y":2},
+ {"label":"K", "x":8.75, "y":2},
+ {"label":"L", "x":9.75, "y":2},
+ {"label":":", "x":10.75, "y":2},
+ {"label":"\"", "x":11.75, "y":2},
+ {"label":"Non-US Hash", "x":12.75, "y":2},
+ {"label":"Enter", "x":13.75, "y":2, "w":1.25},
+ {"label":"PgUp", "x":15, "y":2},
+ {"label":"Shift", "x":0, "y":3, "w":1.25},
+ {"label":"Non-US Backslash", "x":1.25, "y":3},
+ {"label":"Z", "x":2.25, "y":3},
+ {"label":"X", "x":3.25, "y":3},
+ {"label":"C", "x":4.25, "y":3},
+ {"label":"V", "x":5.25, "y":3},
+ {"label":"B", "x":6.25, "y":3},
+ {"label":"N", "x":7.25, "y":3},
+ {"label":"M", "x":8.25, "y":3},
+ {"label":"<", "x":9.25, "y":3},
+ {"label":">", "x":10.25, "y":3},
+ {"label":"?", "x":11.25, "y":3},
+ {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+ {"label":"Up", "x":14, "y":3},
+ {"label":"PgDn", "x":15, "y":3},
+ {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+ {"label":"Win", "x":1.25, "y":4, "w":1.25},
+ {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+ {"label":"Space", "x":3.75, "y":4, "w":6.25},
+ {"label":"Alt", "x":10, "y":4},
+ {"label":"Win", "x":11, "y":4},
+ {"label":"Ctrl", "x":12, "y":4},
+ {"label":"Left", "x":13, "y":4},
+ {"label":"Down", "x":14, "y":4},
+ {"label":"Right", "x":15, "y":4}
+ ]
+ },
+ "LAYOUT_65_ansi": {
+ "layout": [
+ {"label":"Esc", "x":0, "y":0},
+ {"label":"!", "x":1, "y":0},
+ {"label":"@", "x":2, "y":0},
+ {"label":"#", "x":3, "y":0},
+ {"label":"$", "x":4, "y":0},
+ {"label":"%", "x":5, "y":0},
+ {"label":"^", "x":6, "y":0},
+ {"label":"&", "x":7, "y":0},
+ {"label":"*", "x":8, "y":0},
+ {"label":"(", "x":9, "y":0},
+ {"label":")", "x":10, "y":0},
+ {"label":"_", "x":11, "y":0},
+ {"label":"+", "x":12, "y":0},
+ {"label":"Backspace", "x":13, "y":0, "w":2},
+ {"label":"~", "x":15, "y":0},
+ {"label":"Tab", "x":0, "y":1, "w":1.5},
+ {"label":"Q", "x":1.5, "y":1},
+ {"label":"W", "x":2.5, "y":1},
+ {"label":"E", "x":3.5, "y":1},
+ {"label":"R", "x":4.5, "y":1},
+ {"label":"T", "x":5.5, "y":1},
+ {"label":"Y", "x":6.5, "y":1},
+ {"label":"U", "x":7.5, "y":1},
+ {"label":"I", "x":8.5, "y":1},
+ {"label":"O", "x":9.5, "y":1},
+ {"label":"P", "x":10.5, "y":1},
+ {"label":"{", "x":11.5, "y":1},
+ {"label":"}", "x":12.5, "y":1},
+ {"label":"|", "x":13.5, "y":1, "w":1.5},
+ {"label":"Delete", "x":15, "y":1},
+ {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+ {"label":"A", "x":1.75, "y":2},
+ {"label":"S", "x":2.75, "y":2},
+ {"label":"D", "x":3.75, "y":2},
+ {"label":"F", "x":4.75, "y":2},
+ {"label":"G", "x":5.75, "y":2},
+ {"label":"H", "x":6.75, "y":2},
+ {"label":"J", "x":7.75, "y":2},
+ {"label":"K", "x":8.75, "y":2},
+ {"label":"L", "x":9.75, "y":2},
+ {"label":":", "x":10.75, "y":2},
+ {"label":"\"", "x":11.75, "y":2},
+ {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+ {"label":"PgUp", "x":15, "y":2},
+ {"label":"Shift", "x":0, "y":3, "w":2.25},
+ {"label":"Z", "x":2.25, "y":3},
+ {"label":"X", "x":3.25, "y":3},
+ {"label":"C", "x":4.25, "y":3},
+ {"label":"V", "x":5.25, "y":3},
+ {"label":"B", "x":6.25, "y":3},
+ {"label":"N", "x":7.25, "y":3},
+ {"label":"M", "x":8.25, "y":3},
+ {"label":"<", "x":9.25, "y":3},
+ {"label":">", "x":10.25, "y":3},
+ {"label":"?", "x":11.25, "y":3},
+ {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+ {"label":"Up", "x":14, "y":3},
+ {"label":"PgDn", "x":15, "y":3},
+ {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+ {"label":"Win", "x":1.25, "y":4, "w":1.25},
+ {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+ {"label":"Space", "x":3.75, "y":4, "w":6.25},
+ {"label":"Alt", "x":10, "y":4},
+ {"label":"Win", "x":11, "y":4},
+ {"label":"Ctrl", "x":12, "y":4},
+ {"label":"Left", "x":13, "y":4},
+ {"label":"Down", "x":14, "y":4},
+ {"label":"Right", "x":15, "y":4}
+ ]
+ },
+ "LAYOUT_ansi_tsangan": {
+ "layout": [
+ {"label":"Esc", "x":0, "y":0},
+ {"label":"!", "x":1, "y":0},
+ {"label":"@", "x":2, "y":0},
+ {"label":"#", "x":3, "y":0},
+ {"label":"$", "x":4, "y":0},
+ {"label":"%", "x":5, "y":0},
+ {"label":"^", "x":6, "y":0},
+ {"label":"&", "x":7, "y":0},
+ {"label":"*", "x":8, "y":0},
+ {"label":"(", "x":9, "y":0},
+ {"label":")", "x":10, "y":0},
+ {"label":"_", "x":11, "y":0},
+ {"label":"+", "x":12, "y":0},
+ {"label":"|", "x":13, "y":0},
+ {"label":"Backspace", "x":14, "y":0},
+ {"label":"~", "x":15, "y":0},
+ {"label":"Tab", "x":0, "y":1, "w":1.5},
+ {"label":"Q", "x":1.5, "y":1},
+ {"label":"W", "x":2.5, "y":1},
+ {"label":"E", "x":3.5, "y":1},
+ {"label":"R", "x":4.5, "y":1},
+ {"label":"T", "x":5.5, "y":1},
+ {"label":"Y", "x":6.5, "y":1},
+ {"label":"U", "x":7.5, "y":1},
+ {"label":"I", "x":8.5, "y":1},
+ {"label":"O", "x":9.5, "y":1},
+ {"label":"P", "x":10.5, "y":1},
+ {"label":"{", "x":11.5, "y":1},
+ {"label":"}", "x":12.5, "y":1},
+ {"label":"|", "x":13.5, "y":1, "w":1.5},
+ {"label":"Delete", "x":15, "y":1},
+ {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+ {"label":"A", "x":1.75, "y":2},
+ {"label":"S", "x":2.75, "y":2},
+ {"label":"D", "x":3.75, "y":2},
+ {"label":"F", "x":4.75, "y":2},
+ {"label":"G", "x":5.75, "y":2},
+ {"label":"H", "x":6.75, "y":2},
+ {"label":"J", "x":7.75, "y":2},
+ {"label":"K", "x":8.75, "y":2},
+ {"label":"L", "x":9.75, "y":2},
+ {"label":":", "x":10.75, "y":2},
+ {"label":"\"", "x":11.75, "y":2},
+ {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+ {"label":"PgUp", "x":15, "y":2},
+ {"label":"Shift", "x":0, "y":3, "w":2.25},
+ {"label":"Z", "x":2.25, "y":3},
+ {"label":"X", "x":3.25, "y":3},
+ {"label":"C", "x":4.25, "y":3},
+ {"label":"V", "x":5.25, "y":3},
+ {"label":"B", "x":6.25, "y":3},
+ {"label":"N", "x":7.25, "y":3},
+ {"label":"M", "x":8.25, "y":3},
+ {"label":"<", "x":9.25, "y":3},
+ {"label":">", "x":10.25, "y":3},
+ {"label":"?", "x":11.25, "y":3},
+ {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+ {"label":"Up", "x":14, "y":3},
+ {"label":"PgDn", "x":15, "y":3},
+ {"label":"Ctrl", "x":0, "y":4, "w":1.5},
+ {"label":"Win", "x":1.5, "y":4},
+ {"label":"Alt", "x":2.5, "y":4, "w":1.5},
+ {"label":"Space", "x":4, "y":4, "w":7},
+ {"label":"Alt", "x":11, "y":4, "w":1.5},
+ {"label":"Left", "x":13, "y":4},
+ {"label":"Down", "x":14, "y":4},
+ {"label":"Right", "x":15, "y":4}
+ ]
+ },
+ "LAYOUT_65_iso": {
+ "layout": [
+ {"label":"Esc", "x":0, "y":0},
+ {"label":"!", "x":1, "y":0},
+ {"label":"\"", "x":2, "y":0},
+ {"label":"\u00a3", "x":3, "y":0},
+ {"label":"$", "x":4, "y":0},
+ {"label":"%", "x":5, "y":0},
+ {"label":"^", "x":6, "y":0},
+ {"label":"&", "x":7, "y":0},
+ {"label":"*", "x":8, "y":0},
+ {"label":"(", "x":9, "y":0},
+ {"label":")", "x":10, "y":0},
+ {"label":"_", "x":11, "y":0},
+ {"label":"+", "x":12, "y":0},
+ {"label":"Backspace", "x":13, "y":0, "w":2},
+ {"label":"\u00ac", "x":15, "y":0},
+ {"label":"Tab", "x":0, "y":1, "w":1.5},
+ {"label":"Q", "x":1.5, "y":1},
+ {"label":"W", "x":2.5, "y":1},
+ {"label":"E", "x":3.5, "y":1},
+ {"label":"R", "x":4.5, "y":1},
+ {"label":"T", "x":5.5, "y":1},
+ {"label":"Y", "x":6.5, "y":1},
+ {"label":"U", "x":7.5, "y":1},
+ {"label":"I", "x":8.5, "y":1},
+ {"label":"O", "x":9.5, "y":1},
+ {"label":"P", "x":10.5, "y":1},
+ {"label":"{", "x":11.5, "y":1},
+ {"label":"}", "x":12.5, "y":1},
+ {"label":"Delete", "x":15, "y":1},
+ {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+ {"label":"A", "x":1.75, "y":2},
+ {"label":"S", "x":2.75, "y":2},
+ {"label":"D", "x":3.75, "y":2},
+ {"label":"F", "x":4.75, "y":2},
+ {"label":"G", "x":5.75, "y":2},
+ {"label":"H", "x":6.75, "y":2},
+ {"label":"J", "x":7.75, "y":2},
+ {"label":"K", "x":8.75, "y":2},
+ {"label":"L", "x":9.75, "y":2},
+ {"label":":", "x":10.75, "y":2},
+ {"label":"@", "x":11.75, "y":2},
+ {"label":"~", "x":12.75, "y":2},
+ {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
+ {"label":"PgUp", "x":15, "y":2},
+ {"label":"Shift", "x":0, "y":3, "w":1.25},
+ {"label":"|", "x":1.25, "y":3},
+ {"label":"Z", "x":2.25, "y":3},
+ {"label":"X", "x":3.25, "y":3},
+ {"label":"C", "x":4.25, "y":3},
+ {"label":"V", "x":5.25, "y":3},
+ {"label":"B", "x":6.25, "y":3},
+ {"label":"N", "x":7.25, "y":3},
+ {"label":"M", "x":8.25, "y":3},
+ {"label":"<", "x":9.25, "y":3},
+ {"label":">", "x":10.25, "y":3},
+ {"label":"?", "x":11.25, "y":3},
+ {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+ {"label":"Up", "x":14, "y":3},
+ {"label":"PgDn", "x":15, "y":3},
+ {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+ {"label":"Win", "x":1.25, "y":4, "w":1.25},
+ {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+ {"label":"Space", "x":3.75, "y":4, "w":6.25},
+ {"label":"AltGr", "x":10, "y":4},
+ {"label":"Win", "x":11, "y":4},
+ {"label":"Ctrl", "x":12, "y":4},
+ {"label":"Left", "x":13, "y":4},
+ {"label":"Down", "x":14, "y":4},
+ {"label":"Right", "x":15, "y":4}
+ ]
+ },
+ "LAYOUT_iso_tsangan": {
+ "layout": [
+ {"label":"Esc", "x":0, "y":0},
+ {"label":"!", "x":1, "y":0},
+ {"label":"\"", "x":2, "y":0},
+ {"label":"\u00a3", "x":3, "y":0},
+ {"label":"$", "x":4, "y":0},
+ {"label":"%", "x":5, "y":0},
+ {"label":"^", "x":6, "y":0},
+ {"label":"&", "x":7, "y":0},
+ {"label":"*", "x":8, "y":0},
+ {"label":"(", "x":9, "y":0},
+ {"label":")", "x":10, "y":0},
+ {"label":"_", "x":11, "y":0},
+ {"label":"+", "x":12, "y":0},
+ {"label":"~", "x":13, "y":0},
+ {"label":"Backspace", "x":14, "y":0},
+ {"label":"\u00ac", "x":15, "y":0},
+ {"label":"Tab", "x":0, "y":1, "w":1.5},
+ {"label":"Q", "x":1.5, "y":1},
+ {"label":"W", "x":2.5, "y":1},
+ {"label":"E", "x":3.5, "y":1},
+ {"label":"R", "x":4.5, "y":1},
+ {"label":"T", "x":5.5, "y":1},
+ {"label":"Y", "x":6.5, "y":1},
+ {"label":"U", "x":7.5, "y":1},
+ {"label":"I", "x":8.5, "y":1},
+ {"label":"O", "x":9.5, "y":1},
+ {"label":"P", "x":10.5, "y":1},
+ {"label":"{", "x":11.5, "y":1},
+ {"label":"}", "x":12.5, "y":1},
+ {"label":"Delete", "x":15, "y":1},
+ {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+ {"label":"A", "x":1.75, "y":2},
+ {"label":"S", "x":2.75, "y":2},
+ {"label":"D", "x":3.75, "y":2},
+ {"label":"F", "x":4.75, "y":2},
+ {"label":"G", "x":5.75, "y":2},
+ {"label":"H", "x":6.75, "y":2},
+ {"label":"J", "x":7.75, "y":2},
+ {"label":"K", "x":8.75, "y":2},
+ {"label":"L", "x":9.75, "y":2},
+ {"label":":", "x":10.75, "y":2},
+ {"label":"@", "x":11.75, "y":2},
+ {"label":"~", "x":12.75, "y":2},
+ {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
+ {"label":"PgUp", "x":15, "y":2},
+ {"label":"Shift", "x":0, "y":3, "w":1.25},
+ {"label":"|", "x":1.25, "y":3},
+ {"label":"Z", "x":2.25, "y":3},
+ {"label":"X", "x":3.25, "y":3},
+ {"label":"C", "x":4.25, "y":3},
+ {"label":"V", "x":5.25, "y":3},
+ {"label":"B", "x":6.25, "y":3},
+ {"label":"N", "x":7.25, "y":3},
+ {"label":"M", "x":8.25, "y":3},
+ {"label":"<", "x":9.25, "y":3},
+ {"label":">", "x":10.25, "y":3},
+ {"label":"?", "x":11.25, "y":3},
+ {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+ {"label":"Up", "x":14, "y":3},
+ {"label":"PgDn", "x":15, "y":3},
+ {"label":"Ctrl", "x":0, "y":4, "w":1.5},
+ {"label":"Win", "x":1.5, "y":4},
+ {"label":"Alt", "x":2.5, "y":4, "w":1.5},
+ {"label":"Space", "x":4, "y":4, "w":7},
+ {"label":"AltGr", "x":11, "y":4, "w":1.5},
+ {"label":"Left", "x":13, "y":4},
+ {"label":"Down", "x":14, "y":4},
+ {"label":"Right", "x":15, "y":4}
+ ]
+ }
+ }
+}
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _MA 0
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT_all(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT)
+};
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _MA 0
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT_65_ansi(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT)
+};
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _MA 0
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT_ansi_tsangan(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT)
+};
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _MA 0
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT_65_iso(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT)
+};
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _MA 0
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT_iso_tsangan(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT)
+};
--- /dev/null
+#pragma once
+
+#define RETRO_TAPPING
--- /dev/null
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum {
+ _MA,
+ _GA,
+ _FL,
+ _SP
+};
+
+#define SPACE LT(_SP, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT_65_ansi(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MPLY,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ KC_CAPS, KC_LGUI, KC_LALT, SPACE, KC_RALT, KC_RCTRL,MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
+
+[_GA] = LAYOUT_65_ansi(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______, _______),
+
+[_FL] = LAYOUT_65_ansi(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RESET, KC_PSCR,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS,
+ _______, _______, _______, _______, _______, TG(_GA), _______, _______, _______, _______, _______, _______, _______, KC_HOME,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_END,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+
+[_SP] = LAYOUT_65_ansi(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+};
--- /dev/null
+TA-65
+=====
+
+A 65% PCB designed to fit the TADA68, Kayak and others by [maartenwut](https://maartenwut.com).
+
+
+
+Keyboard Maintainer: QMK Community<br>
+Hardware Supported: TA-65 PCB<br>
+Hardware Availability: [maartenwut.com](https://maartenwut.com/product/ta-65/)<br>
+
+Make example for this keyboard (after setting up your build environment):
+
+ make ta65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+BOOTLOADER = qmk-dfu
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+
+LAYOUTS = 65_ansi 65_iso
--- /dev/null
+#include "ta65.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ matrix_init_user();
+};
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+ matrix_scan_user();
+};
--- /dev/null
+#pragma once
+#include "quantum.h"
+
+// readability
+#define ___ KC_NO
+#define LAYOUT_all( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, ___}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, ___}, \
+ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \
+ {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, k4a, k4b, k4c, k4d, k4e, ___} \
+}
+
+#define LAYOUT_65_ansi( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, ___}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, ___}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, ___, k2d, k2e, ___}, \
+ {k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \
+ {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, k4a, k4b, k4c, k4d, k4e, ___} \
+}
+
+#define LAYOUT_ansi_tsangan( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k40, k41, k42, k46, k49, k4c, k4d, k4e \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, ___}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, ___, k2d, k2e, ___}, \
+ {k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \
+ {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, ___, ___, k4c, k4d, k4e, ___} \
+}
+
+#define LAYOUT_iso_tsangan( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k40, k41, k42, k46, k49, k4c, k4d, k4e \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, ___, k1e, ___}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, ___}, \
+ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \
+ {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, ___, ___, k4c, k4d, k4e, ___} \
+}
+
+#define LAYOUT_65_iso( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, ___}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, ___}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, ___}, \
+ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \
+ {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, k4a, k4b, k4c, k4d, k4e, ___} \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
--- /dev/null
+/*
+Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Maartenwut
+#define PRODUCT Wasdat
+#define DESCRIPTION Custom controller for the WASD v2 TKL and 104
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D6, D4, F6, F7, F4, F5, F0, F1 }
+#define MATRIX_COL_PINS { }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION ROW2COL
+
+// For QMK DFU
+#define QMK_ESC_OUTPUT D6
+#define QMK_ESC_INPUT D7
+#define QMK_LED B0
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+// #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+// /*==== use exp() and sin() ====*/
+// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP H
+//#define MAGIC_KEY_HELP_ALT SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER0_ALT GRAVE
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
--- /dev/null
+{
+ "keyboard_name": "Wasdat",
+ "url": "https://maartenwut.com/product/wasdat/",
+ "maintainer": "Maartenwut",
+ "width": 22.5,
+ "height": 6.5,
+ "layouts": {
+ "LAYOUT_fullsize_ansi": {
+ "layout": [
+ {"label":"Esc", "x":0, "y":0},
+ {"label":"F1", "x":2, "y":0},
+ {"label":"F2", "x":3, "y":0},
+ {"label":"F3", "x":4, "y":0},
+ {"label":"F4", "x":5, "y":0},
+ {"label":"F5", "x":6.5, "y":0},
+ {"label":"F6", "x":7.5, "y":0},
+ {"label":"F7", "x":8.5, "y":0},
+ {"label":"F8", "x":9.5, "y":0},
+ {"label":"F9", "x":11, "y":0},
+ {"label":"F10", "x":12, "y":0},
+ {"label":"F11", "x":13, "y":0},
+ {"label":"F12", "x":14, "y":0},
+
+ {"label":"PrtSc", "x":15.25, "y":0},
+ {"label":"Scroll Lock", "x":16.25, "y":0},
+ {"label":"Pause", "x":17.25, "y":0},
+
+ {"label":"~", "x":0, "y":1.5},
+ {"label":"1", "x":1, "y":1.5},
+ {"label":"2", "x":2, "y":1.5},
+ {"label":"3", "x":3, "y":1.5},
+ {"label":"4", "x":4, "y":1.5},
+ {"label":"5", "x":5, "y":1.5},
+ {"label":"6", "x":6, "y":1.5},
+ {"label":"7", "x":7, "y":1.5},
+ {"label":"8", "x":8, "y":1.5},
+ {"label":"9", "x":9, "y":1.5},
+ {"label":"0", "x":10, "y":1.5},
+ {"label":"_", "x":11, "y":1.5},
+ {"label":"+", "x":12, "y":1.5},
+ {"label":"Backspace", "x":13, "y":1.5, "w":2},
+
+ {"label":"Insert", "x":15.25, "y":1.5},
+ {"label":"Home", "x":16.25, "y":1.5},
+ {"label":"PgUp", "x":17.25, "y":1.5},
+
+ {"label":"Num Lock", "x":18.5, "y":1.5},
+ {"label":"/", "x":19.5, "y":1.5},
+ {"label":"*", "x":20.5, "y":1.5},
+ {"label":"-", "x":21.5, "y":1.5},
+
+ {"label":"Tab", "x":0, "y":2.5, "w":1.5},
+ {"label":"Q", "x":1.5, "y":2.5},
+ {"label":"W", "x":2.5, "y":2.5},
+ {"label":"E", "x":3.5, "y":2.5},
+ {"label":"R", "x":4.5, "y":2.5},
+ {"label":"T", "x":5.5, "y":2.5},
+ {"label":"Y", "x":6.5, "y":2.5},
+ {"label":"U", "x":7.5, "y":2.5},
+ {"label":"I", "x":8.5, "y":2.5},
+ {"label":"O", "x":9.5, "y":2.5},
+ {"label":"P", "x":10.5, "y":2.5},
+ {"label":"{", "x":11.5, "y":2.5},
+ {"label":"}", "x":12.5, "y":2.5},
+ {"label":"|", "x":13.5, "y":2.5, "w":1.5},
+
+ {"label":"Delete", "x":15.25, "y":2.5},
+ {"label":"End", "x":16.25, "y":2.5},
+ {"label":"PgDn", "x":17.25, "y":2.5},
+
+ {"label":"7", "x":18.5, "y":2.5},
+ {"label":"8", "x":19.5, "y":2.5},
+ {"label":"9", "x":20.5, "y":2.5},
+ {"label":"+", "x":21.5, "y":2.5, "h":2},
+
+ {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+ {"label":"A", "x":1.75, "y":3.5},
+ {"label":"S", "x":2.75, "y":3.5},
+ {"label":"D", "x":3.75, "y":3.5},
+ {"label":"F", "x":4.75, "y":3.5},
+ {"label":"G", "x":5.75, "y":3.5},
+ {"label":"H", "x":6.75, "y":3.5},
+ {"label":"J", "x":7.75, "y":3.5},
+ {"label":"K", "x":8.75, "y":3.5},
+ {"label":"L", "x":9.75, "y":3.5},
+ {"label":":", "x":10.75, "y":3.5},
+ {"label":"\"", "x":11.75, "y":3.5},
+ {"label":"Enter", "x":12.75, "y":3.5, "w":2.25},
+
+ {"label":"4", "x":18.5, "y":3.5},
+ {"label":"5", "x":19.5, "y":3.5},
+ {"label":"6", "x":20.5, "y":3.5},
+
+ {"label":"Shift", "x":0, "y":4.5, "w":2.25},
+ {"label":"Z", "x":2.25, "y":4.5},
+ {"label":"X", "x":3.25, "y":4.5},
+ {"label":"C", "x":4.25, "y":4.5},
+ {"label":"V", "x":5.25, "y":4.5},
+ {"label":"B", "x":6.25, "y":4.5},
+ {"label":"N", "x":7.25, "y":4.5},
+ {"label":"M", "x":8.25, "y":4.5},
+ {"label":"<", "x":9.25, "y":4.5},
+ {"label":">", "x":10.25, "y":4.5},
+ {"label":"?", "x":11.25, "y":4.5},
+ {"label":"Shift", "x":12.25, "y":4.5, "w":2.75},
+
+ {"label":"\u2191", "x":16.25, "y":4.5},
+
+ {"label":"1", "x":18.5, "y":4.5},
+ {"label":"2", "x":19.5, "y":4.5},
+ {"label":"3", "x":20.5, "y":4.5},
+ {"label":"Enter", "x":21.5, "y":4.5, "h":2},
+
+ {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
+ {"label":"Win", "x":1.25, "y":5.5, "w":1.25},
+ {"label":"Alt", "x":2.5, "y":5.5, "w":1.25},
+ {"x":3.75, "y":5.5, "w":6.25},
+ {"label":"Alt", "x":10, "y":5.5, "w":1.25},
+ {"label":"Win", "x":11.25, "y":5.5, "w":1.25},
+ {"label":"Menu", "x":12.5, "y":5.5, "w":1.25},
+ {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25},
+
+ {"label":"\u2190", "x":15.25, "y":5.5},
+ {"label":"\u2193", "x":16.25, "y":5.5},
+ {"label":"\u2192", "x":17.25, "y":5.5},
+
+ {"label":"0", "x":18.5, "y":5.5, "w":2},
+ {"label":".", "x":20.5, "y":5.5}
+ ]
+ },
+ "LAYOUT_fullsize_iso": {
+ "layout": [
+ {"label":"Esc", "x":0, "y":0},
+ {"label":"F1", "x":2, "y":0},
+ {"label":"F2", "x":3, "y":0},
+ {"label":"F3", "x":4, "y":0},
+ {"label":"F4", "x":5, "y":0},
+ {"label":"F5", "x":6.5, "y":0},
+ {"label":"F6", "x":7.5, "y":0},
+ {"label":"F7", "x":8.5, "y":0},
+ {"label":"F8", "x":9.5, "y":0},
+ {"label":"F9", "x":11, "y":0},
+ {"label":"F10", "x":12, "y":0},
+ {"label":"F11", "x":13, "y":0},
+ {"label":"F12", "x":14, "y":0},
+
+ {"label":"PrtSc", "x":15.25, "y":0},
+ {"label":"Scroll Lock", "x":16.25, "y":0},
+ {"label":"Pause", "x":17.25, "y":0},
+
+ {"label":"\u00ac", "x":0, "y":1.5},
+ {"label":"!", "x":1, "y":1.5},
+ {"label":"\"", "x":2, "y":1.5},
+ {"label":"\u00a3", "x":3, "y":1.5},
+ {"label":"$", "x":4, "y":1.5},
+ {"label":"%", "x":5, "y":1.5},
+ {"label":"^", "x":6, "y":1.5},
+ {"label":"&", "x":7, "y":1.5},
+ {"label":"*", "x":8, "y":1.5},
+ {"label":"(", "x":9, "y":1.5},
+ {"label":")", "x":10, "y":1.5},
+ {"label":"_", "x":11, "y":1.5},
+ {"label":"+", "x":12, "y":1.5},
+ {"label":"Backspace", "x":13, "y":1.5, "w":2},
+
+ {"label":"Insert", "x":15.25, "y":1.5},
+ {"label":"Home", "x":16.25, "y":1.5},
+ {"label":"PgUp", "x":17.25, "y":1.5},
+
+ {"label":"Num Lock", "x":18.5, "y":1.5},
+ {"label":"/", "x":19.5, "y":1.5},
+ {"label":"*", "x":20.5, "y":1.5},
+ {"label":"-", "x":21.5, "y":1.5},
+
+ {"label":"Tab", "x":0, "y":2.5, "w":1.5},
+ {"label":"Q", "x":1.5, "y":2.5},
+ {"label":"W", "x":2.5, "y":2.5},
+ {"label":"E", "x":3.5, "y":2.5},
+ {"label":"R", "x":4.5, "y":2.5},
+ {"label":"T", "x":5.5, "y":2.5},
+ {"label":"Y", "x":6.5, "y":2.5},
+ {"label":"U", "x":7.5, "y":2.5},
+ {"label":"I", "x":8.5, "y":2.5},
+ {"label":"O", "x":9.5, "y":2.5},
+ {"label":"P", "x":10.5, "y":2.5},
+ {"label":"{", "x":11.5, "y":2.5},
+ {"label":"}", "x":12.5, "y":2.5},
+ {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2},
+
+ {"label":"Delete", "x":15.25, "y":2.5},
+ {"label":"End", "x":16.25, "y":2.5},
+ {"label":"PgDn", "x":17.25, "y":2.5},
+
+ {"label":"7", "x":18.5, "y":2.5},
+ {"label":"8", "x":19.5, "y":2.5},
+ {"label":"9", "x":20.5, "y":2.5},
+ {"label":"+", "x":21.5, "y":2.5, "h":2},
+
+ {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+ {"label":"A", "x":1.75, "y":3.5},
+ {"label":"S", "x":2.75, "y":3.5},
+ {"label":"D", "x":3.75, "y":3.5},
+ {"label":"F", "x":4.75, "y":3.5},
+ {"label":"G", "x":5.75, "y":3.5},
+ {"label":"H", "x":6.75, "y":3.5},
+ {"label":"J", "x":7.75, "y":3.5},
+ {"label":"K", "x":8.75, "y":3.5},
+ {"label":"L", "x":9.75, "y":3.5},
+ {"label":":", "x":10.75, "y":3.5},
+ {"label":"@", "x":11.75, "y":3.5},
+ {"label":"~", "x":12.75, "y":3.5},
+
+ {"label":"4", "x":18.5, "y":3.5},
+ {"label":"5", "x":19.5, "y":3.5},
+ {"label":"6", "x":20.5, "y":3.5},
+
+ {"label":"Shift", "x":0, "y":4.5, "w":1.25},
+ {"label":"|", "x":1.25, "y":4.5},
+ {"label":"Z", "x":2.25, "y":4.5},
+ {"label":"X", "x":3.25, "y":4.5},
+ {"label":"C", "x":4.25, "y":4.5},
+ {"label":"V", "x":5.25, "y":4.5},
+ {"label":"B", "x":6.25, "y":4.5},
+ {"label":"N", "x":7.25, "y":4.5},
+ {"label":"M", "x":8.25, "y":4.5},
+ {"label":"<", "x":9.25, "y":4.5},
+ {"label":">", "x":10.25, "y":4.5},
+ {"label":"?", "x":11.25, "y":4.5},
+ {"label":"Shift", "x":12.25, "y":4.5, "w":2.75},
+
+ {"label":"\u2191", "x":16.25, "y":4.5},
+
+ {"label":"1", "x":18.5, "y":4.5},
+ {"label":"2", "x":19.5, "y":4.5},
+ {"label":"3", "x":20.5, "y":4.5},
+ {"label":"Enter", "x":21.5, "y":4.5, "h":2},
+
+ {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
+ {"label":"Win", "x":1.25, "y":5.5, "w":1.25},
+ {"label":"Alt", "x":2.5, "y":5.5, "w":1.25},
+ {"x":3.75, "y":5.5, "w":6.25},
+ {"label":"AltGr", "x":10, "y":5.5, "w":1.25},
+ {"label":"Win", "x":11.25, "y":5.5, "w":1.25},
+ {"label":"Menu", "x":12.5, "y":5.5, "w":1.25},
+ {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25},
+
+ {"label":"\u2190", "x":15.25, "y":5.5},
+ {"label":"\u2193", "x":16.25, "y":5.5},
+ {"label":"\u2192", "x":17.25, "y":5.5},
+
+ {"label":"0", "x":18.5, "y":5.5, "w":2},
+ {"label":".", "x":20.5, "y":5.5}
+ ]
+ },
+ "LAYOUT_tkl_ansi": {
+ "layout": [
+ {"label":"Esc", "x":0, "y":0},
+ {"label":"F1", "x":2, "y":0},
+ {"label":"F2", "x":3, "y":0},
+ {"label":"F3", "x":4, "y":0},
+ {"label":"F4", "x":5, "y":0},
+ {"label":"F5", "x":6.5, "y":0},
+ {"label":"F6", "x":7.5, "y":0},
+ {"label":"F7", "x":8.5, "y":0},
+ {"label":"F8", "x":9.5, "y":0},
+ {"label":"F9", "x":11, "y":0},
+ {"label":"F10", "x":12, "y":0},
+ {"label":"F11", "x":13, "y":0},
+ {"label":"F12", "x":14, "y":0},
+
+ {"label":"PrtSc", "x":15.25, "y":0},
+ {"label":"Scroll Lock", "x":16.25, "y":0},
+ {"label":"Pause", "x":17.25, "y":0},
+
+ {"label":"~", "x":0, "y":1.5},
+ {"label":"1", "x":1, "y":1.5},
+ {"label":"2", "x":2, "y":1.5},
+ {"label":"3", "x":3, "y":1.5},
+ {"label":"4", "x":4, "y":1.5},
+ {"label":"5", "x":5, "y":1.5},
+ {"label":"6", "x":6, "y":1.5},
+ {"label":"7", "x":7, "y":1.5},
+ {"label":"8", "x":8, "y":1.5},
+ {"label":"9", "x":9, "y":1.5},
+ {"label":"0", "x":10, "y":1.5},
+ {"label":"_", "x":11, "y":1.5},
+ {"label":"+", "x":12, "y":1.5},
+ {"label":"Backspace", "x":13, "y":1.5, "w":2},
+
+ {"label":"Insert", "x":15.25, "y":1.5},
+ {"label":"Home", "x":16.25, "y":1.5},
+ {"label":"Page Up", "x":17.25, "y":1.5},
+
+ {"label":"Tab", "x":0, "y":2.5, "w":1.5},
+ {"label":"Q", "x":1.5, "y":2.5},
+ {"label":"W", "x":2.5, "y":2.5},
+ {"label":"E", "x":3.5, "y":2.5},
+ {"label":"R", "x":4.5, "y":2.5},
+ {"label":"T", "x":5.5, "y":2.5},
+ {"label":"Y", "x":6.5, "y":2.5},
+ {"label":"U", "x":7.5, "y":2.5},
+ {"label":"I", "x":8.5, "y":2.5},
+ {"label":"O", "x":9.5, "y":2.5},
+ {"label":"P", "x":10.5, "y":2.5},
+ {"label":"{", "x":11.5, "y":2.5},
+ {"label":"}", "x":12.5, "y":2.5},
+ {"label":"|", "x":13.5, "y":2.5, "w":1.5},
+
+ {"label":"Delete", "x":15.25, "y":2.5},
+ {"label":"End", "x":16.25, "y":2.5},
+ {"label":"PgDn", "x":17.25, "y":2.5},
+
+ {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+ {"label":"A", "x":1.75, "y":3.5},
+ {"label":"S", "x":2.75, "y":3.5},
+ {"label":"D", "x":3.75, "y":3.5},
+ {"label":"F", "x":4.75, "y":3.5},
+ {"label":"G", "x":5.75, "y":3.5},
+ {"label":"H", "x":6.75, "y":3.5},
+ {"label":"J", "x":7.75, "y":3.5},
+ {"label":"K", "x":8.75, "y":3.5},
+ {"label":"L", "x":9.75, "y":3.5},
+ {"label":":", "x":10.75, "y":3.5},
+ {"label":"\"", "x":11.75, "y":3.5},
+ {"label":"Enter", "x":12.75, "y":3.5, "w":2.25},
+
+ {"label":"Shift", "x":0, "y":4.5, "w":2.25},
+ {"label":"Z", "x":2.25, "y":4.5},
+ {"label":"X", "x":3.25, "y":4.5},
+ {"label":"C", "x":4.25, "y":4.5},
+ {"label":"V", "x":5.25, "y":4.5},
+ {"label":"B", "x":6.25, "y":4.5},
+ {"label":"N", "x":7.25, "y":4.5},
+ {"label":"M", "x":8.25, "y":4.5},
+ {"label":"<", "x":9.25, "y":4.5},
+ {"label":">", "x":10.25, "y":4.5},
+ {"label":"?", "x":11.25, "y":4.5},
+ {"label":"Shift", "x":12.25, "y":4.5, "w":2.75},
+
+ {"label":"\u2191", "x":16.25, "y":4.5},
+
+ {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
+ {"label":"Win", "x":1.25, "y":5.5, "w":1.25},
+ {"label":"Alt", "x":2.5, "y":5.5, "w":1.25},
+ {"x":3.75, "y":5.5, "w":6.25},
+ {"label":"Alt", "x":10, "y":5.5, "w":1.25},
+ {"label":"Win", "x":11.25, "y":5.5, "w":1.25},
+ {"label":"Menu", "x":12.5, "y":5.5, "w":1.25},
+ {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25},
+
+ {"label":"\u2190", "x":15.25, "y":5.5},
+ {"label":"\u2193", "x":16.25, "y":5.5},
+ {"label":"\u2192", "x":17.25, "y":5.5}
+ ]
+ },
+ "LAYOUT_tkl_iso": {
+ "layout": [
+ {"label":"Esc", "x":0, "y":0},
+ {"label":"F1", "x":2, "y":0},
+ {"label":"F2", "x":3, "y":0},
+ {"label":"F3", "x":4, "y":0},
+ {"label":"F4", "x":5, "y":0},
+ {"label":"F5", "x":6.5, "y":0},
+ {"label":"F6", "x":7.5, "y":0},
+ {"label":"F7", "x":8.5, "y":0},
+ {"label":"F8", "x":9.5, "y":0},
+ {"label":"F9", "x":11, "y":0},
+ {"label":"F10", "x":12, "y":0},
+ {"label":"F11", "x":13, "y":0},
+ {"label":"F12", "x":14, "y":0},
+
+ {"label":"PrtSc", "x":15.25, "y":0},
+ {"label":"Scroll Lock", "x":16.25, "y":0},
+ {"label":"Pause", "x":17.25, "y":0},
+
+ {"label":"\u00ac", "x":0, "y":1.5},
+ {"label":"!", "x":1, "y":1.5},
+ {"label":"\"", "x":2, "y":1.5},
+ {"label":"\u00a3", "x":3, "y":1.5},
+ {"label":"$", "x":4, "y":1.5},
+ {"label":"%", "x":5, "y":1.5},
+ {"label":"^", "x":6, "y":1.5},
+ {"label":"&", "x":7, "y":1.5},
+ {"label":"*", "x":8, "y":1.5},
+ {"label":"(", "x":9, "y":1.5},
+ {"label":")", "x":10, "y":1.5},
+ {"label":"_", "x":11, "y":1.5},
+ {"label":"+", "x":12, "y":1.5},
+ {"label":"Backspace", "x":13, "y":1.5, "w":2},
+
+ {"label":"Insert", "x":15.25, "y":1.5},
+ {"label":"Home", "x":16.25, "y":1.5},
+ {"label":"PgUp", "x":17.25, "y":1.5},
+
+ {"label":"Tab", "x":0, "y":2.5, "w":1.5},
+ {"label":"Q", "x":1.5, "y":2.5},
+ {"label":"W", "x":2.5, "y":2.5},
+ {"label":"E", "x":3.5, "y":2.5},
+ {"label":"R", "x":4.5, "y":2.5},
+ {"label":"T", "x":5.5, "y":2.5},
+ {"label":"Y", "x":6.5, "y":2.5},
+ {"label":"U", "x":7.5, "y":2.5},
+ {"label":"I", "x":8.5, "y":2.5},
+ {"label":"O", "x":9.5, "y":2.5},
+ {"label":"P", "x":10.5, "y":2.5},
+ {"label":"{", "x":11.5, "y":2.5},
+ {"label":"}", "x":12.5, "y":2.5},
+ {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2},
+
+ {"label":"Delete", "x":15.25, "y":2.5},
+ {"label":"End", "x":16.25, "y":2.5},
+ {"label":"PgDn", "x":17.25, "y":2.5},
+
+ {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+ {"label":"A", "x":1.75, "y":3.5},
+ {"label":"S", "x":2.75, "y":3.5},
+ {"label":"D", "x":3.75, "y":3.5},
+ {"label":"F", "x":4.75, "y":3.5},
+ {"label":"G", "x":5.75, "y":3.5},
+ {"label":"H", "x":6.75, "y":3.5},
+ {"label":"J", "x":7.75, "y":3.5},
+ {"label":"K", "x":8.75, "y":3.5},
+ {"label":"L", "x":9.75, "y":3.5},
+ {"label":":", "x":10.75, "y":3.5},
+ {"label":"@", "x":11.75, "y":3.5},
+ {"label":"~", "x":12.75, "y":3.5},
+
+ {"label":"Shift", "x":0, "y":4.5, "w":1.25},
+ {"label":"|", "x":1.25, "y":4.5},
+ {"label":"Z", "x":2.25, "y":4.5},
+ {"label":"X", "x":3.25, "y":4.5},
+ {"label":"C", "x":4.25, "y":4.5},
+ {"label":"V", "x":5.25, "y":4.5},
+ {"label":"B", "x":6.25, "y":4.5},
+ {"label":"N", "x":7.25, "y":4.5},
+ {"label":"M", "x":8.25, "y":4.5},
+ {"label":"<", "x":9.25, "y":4.5},
+ {"label":">", "x":10.25, "y":4.5},
+ {"label":"?", "x":11.25, "y":4.5},
+ {"label":"Shift", "x":12.25, "y":4.5, "w":2.75},
+
+ {"label":"\u2191", "x":16.25, "y":4.5},
+
+ {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
+ {"label":"Win", "x":1.25, "y":5.5, "w":1.25},
+ {"label":"Alt", "x":2.5, "y":5.5, "w":1.25},
+ {"x":3.75, "y":5.5, "w":6.25},
+ {"label":"AltGr", "x":10, "y":5.5, "w":1.25},
+ {"label":"Win", "x":11.25, "y":5.5, "w":1.25},
+ {"label":"Menu", "x":12.5, "y":5.5, "w":1.25},
+ {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25},
+
+ {"label":"\u2190", "x":15.25, "y":5.5},
+ {"label":"\u2193", "x":16.25, "y":5.5},
+ {"label":"\u2192", "x":17.25, "y":5.5}
+ ]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /*
+ * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐
+ * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Slk│Pse│
+ * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐
+ * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp| |Ins|Hom|PgU| |Num| / | * | - |
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤
+ * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │ |Del|End|PgD| │ 7 │ 8 │ 9 │ │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ ├───┼───┼───┤ + │
+ * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │ │ 4 │ 5 │ 6 │ │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ ┌───┐ ├───┼───┼───┼───┤
+ * │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ │ 1 │ 2 │ 3 │ │
+ * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│
+ * │Ctrl│GUI │Alt │ │ Alt│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ │ 0 │ . │ │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘
+ */
+ LAYOUT_fullsize_ansi(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
+
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT
+ )
+};
--- /dev/null
+# The default ANSI keymap for the Wasdat
--- /dev/null
+/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /*
+ * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐
+ * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Slk│Pse│
+ * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐
+ * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp| |Ins|Hom|PgU| |Num| / | * | - |
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤
+ * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ │ |Del|End|PgD| │ 7 │ 8 │ 9 │ │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ Ent│ └───┴───┴───┘ ├───┼───┼───┤ + │
+ * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │ │ │ 4 │ 5 │ 6 │ │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐ ├───┼───┼───┼───┤
+ * │Shft│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ │ 1 │ 2 │ 3 │ │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│
+ * │Ctrl│GUI │Alt │ │AlGr│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ │ 0 │ . │ │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘
+ */
+ LAYOUT_fullsize_iso(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
+
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT
+ )
+};
--- /dev/null
+# The default ISO keymap for the Wasdat
--- /dev/null
+#pragma once
+
+#define LAYER_FN
+#define LAYER_NUMPAD
--- /dev/null
+#include QMK_KEYBOARD_H
+#include "konstantin.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Base layer
+ * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐
+ * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12││PSc│SLk│Pau│
+ * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐
+ * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace ││Ins│Hom│PgU│
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤
+ * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ ││Del│End│PgD│
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐Ent │└───┴───┴───┘
+ * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ \ │ │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐
+ * │LSft│RAG│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ RShift │ │ ↑ │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐
+ * │LCtl│LGui│LAlt│ Space │RAlt│RGui│FnLk│RCtl││ ← │ ↓ │ → │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘
+ */
+ [L_BASE] = LAYOUT_tkl_iso(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN,
+ FN_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+ KC_LSFT, RAL_RGU, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, FN_FNLK, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ /* Function layer
+ * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐
+ * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ││ │Num│ │
+ * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐
+ * │ │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ Clear ││ │ │ │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤
+ * │ M4 │M2 │M↑ │M1 │M3 │M5 │ │UCM│ │Stp│Ply│Prv│Nxt│ ││ │ │ │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │└───┴───┴───┘
+ * │ │M← │M↓ │M→ │MW↑│ │ │ │ │ │ │ │ │ │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐
+ * │ │ │MA0│MA2│MW←│MW→│ │ │App│Vo-│Vo+│Mut│ │ │PgU│
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐
+ * │ │DtPR│DtNA│ MW↓ │ │ │ │ ││Hom│PgD│End│
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘
+ */
+ [L_FN] = LAYOUT_tkl_iso(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD, _______,
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, CLEAR, _______, _______, _______,
+ KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, _______, _______, _______,
+ _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP, KC_VOLD, KC_VOLU, KC_MUTE, _______, KC_PGUP,
+ _______, DST_P_R, DST_N_A, KC_WH_D, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END
+ ),
+
+ /* Numpad layer
+ * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐
+ * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ││ │Num│ │
+ * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐
+ * │ │ │ │ │ │ │ │P7 │P8 │P9 │P- │ − │ = │ ││ │ │ │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤
+ * │ │ │ │ │ │ │ │P4 │P5 │P6 │P+ │ ( │ ) │ ││ │ │ │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐PEnt│└───┴───┴───┘
+ * │ │ │ │ │ │ │ │P1 │P2 │P3 │P* │ × │ │ │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐
+ * │ │ │ │ │ │ │ │P0 │P0 │ , │P. │P/ │ ÷ │ │ │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐
+ * │ │ │ │ │ │ │ │ ││ │ │ │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘
+ */
+ [L_NUMPAD] = LAYOUT_tkl_iso(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD, _______,
+ _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, MINUS, EQUALS, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, L_PAREN, R_PAREN, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PAST, TIMES, _______, KC_PENT,
+ _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_P0, COMMA, KC_PDOT, KC_PSLS, DIVIDE, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+};
--- /dev/null
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = no
+COMMAND_ENABLE = yes
+CONSOLE_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+MOUSEKEY_ENABLE = yes
+NKRO_ENABLE = yes
+SPACE_CADET_ENABLE = no
+TAP_DANCE_ENABLE = yes
+UNICODEMAP_ENABLE = yes
--- /dev/null
+/*
+Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "debounce.h"
+#include "quantum.h"
+
+#if (MATRIX_COLS <= 8)
+# define print_matrix_header() print("\nr/c 01234567\n")
+# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
+# define matrix_bitpop(i) bitpop(matrix[i])
+# define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
+# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
+# define matrix_bitpop(i) bitpop16(matrix[i])
+# define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
+# define matrix_bitpop(i) bitpop32(matrix[i])
+# define ROW_SHIFTER ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+ extern const matrix_row_t matrix_mask[];
+#endif
+
+#ifdef DIRECT_PINS
+static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS;
+#elif (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+//static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t raw_matrix[MATRIX_ROWS]; //raw values
+static matrix_row_t matrix[MATRIX_ROWS]; //debounced values
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+ matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+ matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+ return MATRIX_COLS;
+}
+
+//Deprecated.
+bool matrix_is_modified(void)
+{
+ if (debounce_active()) return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+ // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+ return matrix[row] & matrix_mask[row];
+#else
+ return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+ print_matrix_header();
+
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ print_matrix_row(row);
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += matrix_bitpop(i);
+ }
+ return count;
+}
+
+
+#ifdef DIRECT_PINS
+
+static void init_pins(void) {
+ for (int row = 0; row < MATRIX_ROWS; row++) {
+ for (int col = 0; col < MATRIX_COLS; col++) {
+ pin_t pin = direct_pins[row][col];
+ if (pin != NO_PIN) {
+ setPinInputHigh(pin);
+ }
+ }
+ }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
+ matrix_row_t last_row_value = current_matrix[current_row];
+ current_matrix[current_row] = 0;
+
+ for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+ pin_t pin = direct_pins[current_row][col_index];
+ if (pin != NO_PIN) {
+ current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index);
+ }
+ }
+
+ return (last_row_value != current_matrix[current_row]);
+}
+
+#elif (DIODE_DIRECTION == COL2ROW)
+
+static void select_row(uint8_t row)
+{
+ setPinOutput(row_pins[row]);
+ writePinLow(row_pins[row]);
+}
+
+static void unselect_row(uint8_t row)
+{
+ setPinInputHigh(row_pins[row]);
+}
+
+static void unselect_rows(void)
+{
+ for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+ setPinInputHigh(row_pins[x]);
+ }
+}
+
+static void init_pins(void) {
+ unselect_rows();
+ for (uint8_t x = 0; x < MATRIX_COLS; x++) {
+ setPinInputHigh(col_pins[x]);
+ }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+ // Store last value of row prior to reading
+ matrix_row_t last_row_value = current_matrix[current_row];
+
+ // Clear data in matrix row
+ current_matrix[current_row] = 0;
+
+ // Select row and wait for row selecton to stabilize
+ select_row(current_row);
+ wait_us(30);
+
+ // For each col...
+ for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+ // Select the col pin to read (active low)
+ uint8_t pin_state = readPin(col_pins[col_index]);
+
+ // Populate the matrix row with the state of the col pin
+ current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
+ }
+
+ // Unselect row
+ unselect_row(current_row);
+
+ return (last_row_value != current_matrix[current_row]);
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+/* Cols 0 - 15
+ * col 0: C7
+ * col 1: B6
+ * col 2: C6
+ * col 3: B4
+ * col 4: B5
+ * col 5: D7
+ * These columns use a 74HC237D 3 to 8 bit demultiplexer.
+ * A0 A1 A2
+ * col / pin: PD2 PD1 PD0
+ * 6: 1 1 1
+ * 7: 0 1 1
+ * 8: 1 0 1
+ * 9: 0 0 1
+ * 10: 1 1 0
+ * 11: 0 1 0
+ * 12: 1 0 0
+ * col 13: D3
+ * col 14: B7
+ * col 15: B3
+ */
+static void select_col(uint8_t col)
+{
+ switch (col) {
+ case 0:
+ writePinLow(C7);
+ break;
+ case 1:
+ writePinLow(B6);
+ break;
+ case 2:
+ writePinLow(C6);
+ break;
+ case 3:
+ writePinLow(B4);
+ break;
+ case 4:
+ writePinLow(B5);
+ break;
+ case 5:
+ writePinLow(D7);
+ break;
+ case 6:
+ writePinHigh(D0);
+ writePinHigh(D1);
+ writePinHigh(D2);
+ break;
+ case 7:
+ writePinHigh(D0);
+ writePinHigh(D1);
+ break;
+ case 8:
+ writePinHigh(D0);
+ writePinHigh(D2);
+ break;
+ case 9:
+ writePinHigh(D0);
+ break;
+ case 10:
+ writePinHigh(D1);
+ writePinHigh(D2);
+ break;
+ case 11:
+ writePinHigh(D1);
+ break;
+ case 12:
+ writePinHigh(D2);
+ break;
+ case 13:
+ writePinLow(D3);
+ break;
+ case 14:
+ writePinLow(B7);
+ break;
+ case 15:
+ writePinLow(B3);
+ break;
+ }
+}
+
+static void unselect_col(uint8_t col)
+{
+ switch (col) {
+ case 0:
+ writePinHigh(C7);
+ break;
+ case 1:
+ writePinHigh(B6);
+ break;
+ case 2:
+ writePinHigh(C6);
+ break;
+ case 3:
+ writePinHigh(B4);
+ break;
+ case 4:
+ writePinHigh(B5);
+ break;
+ case 5:
+ writePinHigh(D7);
+ break;
+ case 6:
+ writePinLow(D0);
+ writePinLow(D1);
+ writePinLow(D2);
+ break;
+ case 7:
+ writePinLow(D0);
+ writePinLow(D1);
+ break;
+ case 8:
+ writePinLow(D0);
+ writePinLow(D2);
+ break;
+ case 9:
+ writePinLow(D0);
+ break;
+ case 10:
+ writePinLow(D1);
+ writePinLow(D2);
+ break;
+ case 11:
+ writePinLow(D1);
+ break;
+ case 12:
+ writePinLow(D2);
+ break;
+ case 13:
+ writePinHigh(D3);
+ break;
+ case 14:
+ writePinHigh(B7);
+ break;
+ case 15:
+ writePinHigh(B3);
+ break;
+ }
+}
+
+static void unselect_cols(void)
+{
+ //Native
+ setPinOutput(D3);
+ setPinOutput(D7);
+ writePinHigh(D3);
+ writePinHigh(D7);
+
+ setPinOutput(C6);
+ setPinOutput(C7);
+ writePinHigh(C6);
+ writePinHigh(C7);
+
+ setPinOutput(B3);
+ setPinOutput(B4);
+ setPinOutput(B5);
+ setPinOutput(B6);
+ setPinOutput(B7);
+ writePinHigh(B3);
+ writePinHigh(B4);
+ writePinHigh(B5);
+ writePinHigh(B6);
+ writePinHigh(B7);
+
+ //Demultiplexer
+ setPinOutput(D0);
+ setPinOutput(D1);
+ setPinOutput(D2);
+ writePinLow(D0);
+ writePinLow(D1);
+ writePinLow(D2);
+}
+
+static void init_pins(void) {
+ unselect_cols();
+ for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+ setPinInputHigh(row_pins[x]);
+ }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+ bool matrix_changed = false;
+
+ // Select col and wait for col selecton to stabilize
+ select_col(current_col);
+ wait_us(30);
+
+ // For each row...
+ for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
+ {
+
+ // Store last value of row prior to reading
+ matrix_row_t last_row_value = current_matrix[row_index];
+
+ // Check row pin state
+ if (readPin(row_pins[row_index]) == 0)
+ {
+ // Pin LO, set col bit
+ current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+ }
+ else
+ {
+ // Pin HI, clear col bit
+ current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+ }
+
+ // Determine if the matrix changed state
+ if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+ {
+ matrix_changed = true;
+ }
+ }
+
+ // Unselect col
+ unselect_col(current_col);
+
+ return matrix_changed;
+}
+
+#endif
+
+void matrix_init(void) {
+
+ // initialize key pins
+ init_pins();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ raw_matrix[i] = 0;
+ matrix[i] = 0;
+ }
+
+ debounce_init(MATRIX_ROWS);
+
+ matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+ bool changed = false;
+
+#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW)
+ // Set row, read cols
+ for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+ changed |= read_cols_on_row(raw_matrix, current_row);
+ }
+#elif (DIODE_DIRECTION == ROW2COL)
+ // Set col, read rows
+ for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+ changed |= read_rows_on_col(raw_matrix, current_col);
+ }
+#endif
+
+ debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
+
+ matrix_scan_quantum();
+ return (uint8_t)changed;
+}
--- /dev/null
+# Wasdat
+
+
+
+A drop-in replacement controller for the WASD v2 TKL and fullsize models.
+
+Keyboard Maintainer: [Maartenwut](https://github.com/Maartenwut)
+Hardware Supported: WASD v2 TKL/Fullsize ANSI & ISO with Wasdat controller
+Hardware Availability: [maartenwut.com](https://maartenwut.com/product/wasdat/)
+
+## Flashing
+
+The WASD has no reset button, but it does have a bank of DIP switches on the bottom, so to enter the bootloader on this board, simply toggle the first one on and off.
+
+---
+
+Make example for this keyboard (after setting up your build environment):
+
+ make wasdat:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = qmk-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c
+LAYOUTS = fullsize_ansi fullsize_iso tkl_ansi tkl_iso
--- /dev/null
+/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "wasdat.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+ led_init_ports();
+}
+
+void led_init_ports(void) {
+ setPinOutput(B0);
+ setPinOutput(B1);
+ setPinOutput(B2);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+ writePinLow(B0);
+ } else {
+ writePinHigh(B0);
+ }
+
+ if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+ writePinLow(B1);
+ } else {
+ writePinHigh(B1);
+ }
+
+ if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+ writePinLow(B2);
+ } else {
+ writePinHigh(B2);
+ }
+
+ led_set_user(usb_led);
+}
--- /dev/null
+/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_fullsize_ansi( \
+ K05, K44, K42, K32, K02, K21, K0A, K3E, K4E, K4D, K2D, K0D, K7D, K23, K53, K51, \
+ K45, K25, K24, K22, K20, K40, K48, K28, K2A, K2E, K2F, K4F, K4A, K3D, K47, K4C, K46, K69, K67, K66, K76, \
+ K35, K55, K54, K52, K50, K30, K38, K58, K5A, K5E, K5F, K3F, K3A, K1D, K49, K2C, K26, K59, K57, K56, K5C, \
+ K34, K15, K14, K12, K10, K00, K08, K18, K1A, K1E, K1F, K0F, K6D, K39, K37, K36, \
+ K3B, K65, K64, K62, K60, K70, K78, K68, K6A, K6E, K7F, K1B, K0C, K19, K17, K16, K1C, \
+ K41, K31, K03, K09, K73, K11, K33, K61, K7C, K79, K77, K07, K06 \
+) \
+{ \
+ { K00, XXX, K02, K03, XXX, K05, K06, K07, K08, K09, K0A, XXX, K0C, K0D, XXX, K0F }, \
+ { K10, K11, K12, XXX, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
+ { K20, K21, K22, K23, K24, K25, K26, XXX, K28, XXX, K2A, XXX, K2C, K2D, K2E, K2F }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E, K3F }, \
+ { K40, K41, K42, XXX, K44, K45, K46, K47, K48, K49, K4A, XXX, K4C, K4D, K4E, K4F }, \
+ { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, XXX, K5C, XXX, K5E, K5F }, \
+ { K60, K61, K62, XXX, K64, K65, K66, K67, K68, K69, K6A, XXX, XXX, K6D, K6E, XXX }, \
+ { K70, XXX, XXX, K73, XXX, XXX, K76, K77, K78, K79, XXX, XXX, K7C, K7D, XXX, K7F } \
+}
+
+#define LAYOUT_fullsize_iso( \
+ K05, K44, K42, K32, K02, K21, K0A, K3E, K4E, K4D, K2D, K0D, K7D, K23, K53, K51, \
+ K45, K25, K24, K22, K20, K40, K48, K28, K2A, K2E, K2F, K4F, K4A, K3D, K47, K4C, K46, K69, K67, K66, K76, \
+ K35, K55, K54, K52, K50, K30, K38, K58, K5A, K5E, K5F, K3F, K3A, K49, K2C, K26, K59, K57, K56, K5C, \
+ K34, K15, K14, K12, K10, K00, K08, K18, K1A, K1E, K1F, K0F, K1D, K6D, K39, K37, K36, \
+ K3B, K04, K65, K64, K62, K60, K70, K78, K68, K6A, K6E, K7F, K1B, K0C, K19, K17, K16, K1C, \
+ K41, K31, K03, K09, K73, K11, K33, K61, K7C, K79, K77, K07, K06 \
+) \
+{ \
+ { K00, XXX, K02, K03, K04, K05, K06, K07, K08, K09, K0A, XXX, K0C, K0D, XXX, K0F }, \
+ { K10, K11, K12, XXX, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
+ { K20, K21, K22, K23, K24, K25, K26, XXX, K28, XXX, K2A, XXX, K2C, K2D, K2E, K2F }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E, K3F }, \
+ { K40, K41, K42, XXX, K44, K45, K46, K47, K48, K49, K4A, XXX, K4C, K4D, K4E, K4F }, \
+ { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, XXX, K5C, XXX, K5E, K5F }, \
+ { K60, K61, K62, XXX, K64, K65, K66, K67, K68, K69, K6A, XXX, XXX, K6D, K6E, XXX }, \
+ { K70, XXX, XXX, K73, XXX, XXX, K76, K77, K78, K79, XXX, XXX, K7C, K7D, XXX, K7F } \
+}
+
+#define LAYOUT_tkl_ansi( \
+ K05, K44, K42, K32, K02, K21, K0A, K3E, K4E, K4D, K2D, K0D, K7D, K23, K53, K51, \
+ K45, K25, K24, K22, K20, K40, K48, K28, K2A, K2E, K2F, K4F, K4A, K3D, K47, K4C, K46, \
+ K35, K55, K54, K52, K50, K30, K38, K58, K5A, K5E, K5F, K3F, K3A, K1D, K49, K2C, K26, \
+ K34, K15, K14, K12, K10, K00, K08, K18, K1A, K1E, K1F, K0F, K6D, \
+ K3B, K65, K64, K62, K60, K70, K78, K68, K6A, K6E, K7F, K1B, K0C, \
+ K41, K31, K03, K09, K73, K11, K33, K61, K7C, K79, K77 \
+) \
+{ \
+ { K00, XXX, K02, K03, XXX, K05, XXX, XXX, K08, K09, K0A, XXX, K0C, K0D, XXX, K0F }, \
+ { K10, K11, K12, XXX, K14, K15, XXX, XXX, K18, XXX, K1A, K1B, XXX, K1D, K1E, K1F }, \
+ { K20, K21, K22, K23, K24, K25, K26, XXX, K28, XXX, K2A, XXX, K2C, K2D, K2E, K2F }, \
+ { K30, K31, K32, K33, K34, K35, XXX, XXX, K38, XXX, K3A, K3B, XXX, K3D, K3E, K3F }, \
+ { K40, K41, K42, XXX, K44, K45, K46, K47, K48, K49, K4A, XXX, K4C, K4D, K4E, K4F }, \
+ { K50, K51, K52, K53, K54, K55, XXX, XXX, K58, XXX, K5A, XXX, XXX, XXX, K5E, K5F }, \
+ { K60, K61, K62, XXX, K64, K65, XXX, XXX, K68, XXX, K6A, XXX, XXX, K6D, K6E, XXX }, \
+ { K70, XXX, XXX, K73, XXX, XXX, XXX, K77, K78, K79, XXX, XXX, K7C, K7D, XXX, K7F } \
+}
+
+#define LAYOUT_tkl_iso( \
+ K05, K44, K42, K32, K02, K21, K0A, K3E, K4E, K4D, K2D, K0D, K7D, K23, K53, K51, \
+ K45, K25, K24, K22, K20, K40, K48, K28, K2A, K2E, K2F, K4F, K4A, K3D, K47, K4C, K46, \
+ K35, K55, K54, K52, K50, K30, K38, K58, K5A, K5E, K5F, K3F, K3A, K49, K2C, K26, \
+ K34, K15, K14, K12, K10, K00, K08, K18, K1A, K1E, K1F, K0F, K1D, K6D, \
+ K3B, K04, K65, K64, K62, K60, K70, K78, K68, K6A, K6E, K7F, K1B, K0C, \
+ K41, K31, K03, K09, K73, K11, K33, K61, K7C, K79, K77 \
+) \
+{ \
+ { K00, XXX, K02, K03, K04, K05, XXX, XXX, K08, K09, K0A, XXX, K0C, K0D, XXX, K0F }, \
+ { K10, K11, K12, XXX, K14, K15, XXX, XXX, K18, XXX, K1A, K1B, XXX, K1D, K1E, K1F }, \
+ { K20, K21, K22, K23, K24, K25, K26, XXX, K28, XXX, K2A, XXX, K2C, K2D, K2E, K2F }, \
+ { K30, K31, K32, K33, K34, K35, XXX, XXX, K38, XXX, K3A, K3B, XXX, K3D, K3E, K3F }, \
+ { K40, K41, K42, XXX, K44, K45, K46, K47, K48, K49, K4A, XXX, K4C, K4D, K4E, K4F }, \
+ { K50, K51, K52, K53, K54, K55, XXX, XXX, K58, XXX, K5A, XXX, XXX, XXX, K5E, K5F }, \
+ { K60, K61, K62, XXX, K64, K65, XXX, XXX, K68, XXX, K6A, XXX, XXX, K6D, K6E, XXX }, \
+ { K70, XXX, XXX, K73, XXX, XXX, XXX, K77, K78, K79, XXX, XXX, K7C, K7D, XXX, K7F } \
+}
+++ /dev/null
-/*
-Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x4705
-#define PRODUCT_ID 0x0160
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Maartenwut
-#define PRODUCT Plain60
-#define DESCRIPTION A plain 60% PCB
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS {B4,D7,D6,D4,E6}
-#define MATRIX_COL_PINS {D2,D1,D0,D3,D5,B5,F0,B6,C6,C7,F1,F4,F5,F6,F7}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-#define QMK_ESC_OUTPUT D2 // usually COL
-#define QMK_ESC_INPUT B4 // usually ROW
-
-//VIA
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
-
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
-// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 635
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 389 // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+++ /dev/null
-{
- "keyboard_name": "Plain60",
- "url": "",
- "maintainer": "maartenwut",
- "width": 15,
- "height": 5,
- "layouts": {
- "LAYOUT": {
- "key_count": 65,
- "layout": [
- {"label":"k00", "x":0, "y":0},
- {"label":"k01", "x":1, "y":0},
- {"label":"k02", "x":2, "y":0},
- {"label":"k03", "x":3, "y":0},
- {"label":"k04", "x":4, "y":0},
- {"label":"k05", "x":5, "y":0},
- {"label":"k06", "x":6, "y":0},
- {"label":"k07", "x":7, "y":0},
- {"label":"k08", "x":8, "y":0},
- {"label":"k09", "x":9, "y":0},
- {"label":"k0a", "x":10, "y":0},
- {"label":"k0b", "x":11, "y":0},
- {"label":"k0c", "x":12, "y":0},
- {"label":"k0d", "x":13, "y":0},
- {"label":"k0e", "x":14, "y":0},
- {"label":"k10", "x":0, "y":1, "w":1.5},
- {"label":"k11", "x":1.5, "y":1},
- {"label":"k12", "x":2.5, "y":1},
- {"label":"k13", "x":3.5, "y":1},
- {"label":"k14", "x":4.5, "y":1},
- {"label":"k15", "x":5.5, "y":1},
- {"label":"k16", "x":6.5, "y":1},
- {"label":"k17", "x":7.5, "y":1},
- {"label":"k18", "x":8.5, "y":1},
- {"label":"k19", "x":9.5, "y":1},
- {"label":"k1a", "x":10.5, "y":1},
- {"label":"k1b", "x":11.5, "y":1},
- {"label":"k1c", "x":12.5, "y":1},
- {"label":"k1d", "x":13.5, "y":1, "w":1.5},
- {"label":"k20", "x":0, "y":2, "w":1.75},
- {"label":"k21", "x":1.75, "y":2},
- {"label":"k22", "x":2.75, "y":2},
- {"label":"k23", "x":3.75, "y":2},
- {"label":"k24", "x":4.75, "y":2},
- {"label":"k25", "x":5.75, "y":2},
- {"label":"k26", "x":6.75, "y":2},
- {"label":"k27", "x":7.75, "y":2},
- {"label":"k28", "x":8.75, "y":2},
- {"label":"k29", "x":9.75, "y":2},
- {"label":"k2a", "x":10.75, "y":2},
- {"label":"k2b", "x":11.75, "y":2},
- {"label":"k2c", "x":12.75, "y":2},
- {"label":"k2d", "x":13.75, "y":2, "w":1.25},
- {"label":"k30", "x":0, "y":3, "w":1.25},
- {"label":"k31", "x":1.25, "y":3},
- {"label":"k32", "x":2.25, "y":3},
- {"label":"k33", "x":3.25, "y":3},
- {"label":"k34", "x":4.25, "y":3},
- {"label":"k35", "x":5.25, "y":3},
- {"label":"k36", "x":6.25, "y":3},
- {"label":"k37", "x":7.25, "y":3},
- {"label":"k38", "x":8.25, "y":3},
- {"label":"k39", "x":9.25, "y":3},
- {"label":"k3a", "x":10.25, "y":3},
- {"label":"k3b", "x":11.25, "y":3},
- {"label":"k3c", "x":12.25, "y":3, "w":1.75},
- {"label":"k3d", "x":14, "y":3},
- {"label":"k40", "x":0, "y":4, "w":1.25},
- {"label":"k41", "x":1.25, "y":4, "w":1.25},
- {"label":"k42", "x":2.5, "y":4, "w":1.25},
- {"label":"k46", "x":3.75, "y":4, "w":6.25},
- {"label":"k4a", "x":10, "y":4, "w":1.25},
- {"label":"k4b", "x":11.25, "y":4, "w":1.25},
- {"label":"k4c", "x":12.5, "y":4, "w":1.25},
- {"label":"k4d", "x":13.75, "y":4, "w":1.25}
- ]
- },
- "LAYOUT_60_ansi": {
- "key_count": 61,
- "layout": [
- {"label":"k00", "x":0, "y":0},
- {"label":"k01", "x":1, "y":0},
- {"label":"k02", "x":2, "y":0},
- {"label":"k03", "x":3, "y":0},
- {"label":"k04", "x":4, "y":0},
- {"label":"k05", "x":5, "y":0},
- {"label":"k06", "x":6, "y":0},
- {"label":"k07", "x":7, "y":0},
- {"label":"k08", "x":8, "y":0},
- {"label":"k09", "x":9, "y":0},
- {"label":"k0a", "x":10, "y":0},
- {"label":"k0b", "x":11, "y":0},
- {"label":"k0c", "x":12, "y":0},
- {"label":"k0e", "x":13, "y":0, "w":2},
- {"label":"k10", "x":0, "y":1, "w":1.5},
- {"label":"k11", "x":1.5, "y":1},
- {"label":"k12", "x":2.5, "y":1},
- {"label":"k13", "x":3.5, "y":1},
- {"label":"k14", "x":4.5, "y":1},
- {"label":"k15", "x":5.5, "y":1},
- {"label":"k16", "x":6.5, "y":1},
- {"label":"k17", "x":7.5, "y":1},
- {"label":"k18", "x":8.5, "y":1},
- {"label":"k19", "x":9.5, "y":1},
- {"label":"k1a", "x":10.5, "y":1},
- {"label":"k1b", "x":11.5, "y":1},
- {"label":"k1c", "x":12.5, "y":1},
- {"label":"k1d", "x":13.5, "y":1, "w":1.5},
- {"label":"k20", "x":0, "y":2, "w":1.75},
- {"label":"k21", "x":1.75, "y":2},
- {"label":"k22", "x":2.75, "y":2},
- {"label":"k23", "x":3.75, "y":2},
- {"label":"k24", "x":4.75, "y":2},
- {"label":"k25", "x":5.75, "y":2},
- {"label":"k26", "x":6.75, "y":2},
- {"label":"k27", "x":7.75, "y":2},
- {"label":"k28", "x":8.75, "y":2},
- {"label":"k29", "x":9.75, "y":2},
- {"label":"k2a", "x":10.75, "y":2},
- {"label":"k2b", "x":11.75, "y":2},
- {"label":"k2d", "x":12.75, "y":2, "w":2.25},
- {"label":"k30", "x":0, "y":3, "w":2.25},
- {"label":"k32", "x":2.25, "y":3},
- {"label":"k33", "x":3.25, "y":3},
- {"label":"k34", "x":4.25, "y":3},
- {"label":"k35", "x":5.25, "y":3},
- {"label":"k36", "x":6.25, "y":3},
- {"label":"k37", "x":7.25, "y":3},
- {"label":"k38", "x":8.25, "y":3},
- {"label":"k39", "x":9.25, "y":3},
- {"label":"k3a", "x":10.25, "y":3},
- {"label":"k3b", "x":11.25, "y":3},
- {"label":"k3c", "x":12.25, "y":3, "w":2.75},
- {"label":"k40", "x":0, "y":4, "w":1.25},
- {"label":"k41", "x":1.25, "y":4, "w":1.25},
- {"label":"k42", "x":2.5, "y":4, "w":1.25},
- {"label":"k46", "x":3.75, "y":4, "w":6.25},
- {"label":"k4a", "x":10, "y":4, "w":1.25},
- {"label":"k4b", "x":11.25, "y":4, "w":1.25},
- {"label":"k4c", "x":12.5, "y":4, "w":1.25},
- {"label":"k4d", "x":13.75, "y":4, "w":1.25}
- ]
- },
- "LAYOUT_60_ansi_split_bs_rshift": {
- "key_count": 63,
- "layout": [
- {"label":"k00", "x":0, "y":0},
- {"label":"k01", "x":1, "y":0},
- {"label":"k02", "x":2, "y":0},
- {"label":"k03", "x":3, "y":0},
- {"label":"k04", "x":4, "y":0},
- {"label":"k05", "x":5, "y":0},
- {"label":"k06", "x":6, "y":0},
- {"label":"k07", "x":7, "y":0},
- {"label":"k08", "x":8, "y":0},
- {"label":"k09", "x":9, "y":0},
- {"label":"k0a", "x":10, "y":0},
- {"label":"k0b", "x":11, "y":0},
- {"label":"k0c", "x":12, "y":0},
- {"label":"k0d", "x":13, "y":0},
- {"label":"k0e", "x":14, "y":0},
- {"label":"k10", "x":0, "y":1, "w":1.5},
- {"label":"k11", "x":1.5, "y":1},
- {"label":"k12", "x":2.5, "y":1},
- {"label":"k13", "x":3.5, "y":1},
- {"label":"k14", "x":4.5, "y":1},
- {"label":"k15", "x":5.5, "y":1},
- {"label":"k16", "x":6.5, "y":1},
- {"label":"k17", "x":7.5, "y":1},
- {"label":"k18", "x":8.5, "y":1},
- {"label":"k19", "x":9.5, "y":1},
- {"label":"k1a", "x":10.5, "y":1},
- {"label":"k1b", "x":11.5, "y":1},
- {"label":"k1c", "x":12.5, "y":1},
- {"label":"k1d", "x":13.5, "y":1, "w":1.5},
- {"label":"k20", "x":0, "y":2, "w":1.75},
- {"label":"k21", "x":1.75, "y":2},
- {"label":"k22", "x":2.75, "y":2},
- {"label":"k23", "x":3.75, "y":2},
- {"label":"k24", "x":4.75, "y":2},
- {"label":"k25", "x":5.75, "y":2},
- {"label":"k26", "x":6.75, "y":2},
- {"label":"k27", "x":7.75, "y":2},
- {"label":"k28", "x":8.75, "y":2},
- {"label":"k29", "x":9.75, "y":2},
- {"label":"k2a", "x":10.75, "y":2},
- {"label":"k2b", "x":11.75, "y":2},
- {"label":"k2d", "x":12.75, "y":2, "w":2.25},
- {"label":"k30", "x":0, "y":3, "w":2.25},
- {"label":"k32", "x":2.25, "y":3},
- {"label":"k33", "x":3.25, "y":3},
- {"label":"k34", "x":4.25, "y":3},
- {"label":"k35", "x":5.25, "y":3},
- {"label":"k36", "x":6.25, "y":3},
- {"label":"k37", "x":7.25, "y":3},
- {"label":"k38", "x":8.25, "y":3},
- {"label":"k39", "x":9.25, "y":3},
- {"label":"k3a", "x":10.25, "y":3},
- {"label":"k3b", "x":11.25, "y":3},
- {"label":"k3c", "x":12.25, "y":3, "w":1.75},
- {"label":"k3d", "x":14, "y":3},
- {"label":"k40", "x":0, "y":4, "w":1.25},
- {"label":"k41", "x":1.25, "y":4, "w":1.25},
- {"label":"k42", "x":2.5, "y":4, "w":1.25},
- {"label":"k46", "x":3.75, "y":4, "w":6.25},
- {"label":"k4a", "x":10, "y":4, "w":1.25},
- {"label":"k4b", "x":11.25, "y":4, "w":1.25},
- {"label":"k4c", "x":12.5, "y":4, "w":1.25},
- {"label":"k4d", "x":13.75, "y":4, "w":1.25}
- ]
- },
- "LAYOUT_60_hhkb": {
- "key_count": 60,
- "layout": [
- {"label":"k00", "x":0, "y":0},
- {"label":"k01", "x":1, "y":0},
- {"label":"k02", "x":2, "y":0},
- {"label":"k03", "x":3, "y":0},
- {"label":"k04", "x":4, "y":0},
- {"label":"k05", "x":5, "y":0},
- {"label":"k06", "x":6, "y":0},
- {"label":"k07", "x":7, "y":0},
- {"label":"k08", "x":8, "y":0},
- {"label":"k09", "x":9, "y":0},
- {"label":"k0a", "x":10, "y":0},
- {"label":"k0b", "x":11, "y":0},
- {"label":"k0c", "x":12, "y":0},
- {"label":"k0d", "x":13, "y":0},
- {"label":"k0e", "x":14, "y":0},
- {"label":"k10", "x":0, "y":1, "w":1.5},
- {"label":"k11", "x":1.5, "y":1},
- {"label":"k12", "x":2.5, "y":1},
- {"label":"k13", "x":3.5, "y":1},
- {"label":"k14", "x":4.5, "y":1},
- {"label":"k15", "x":5.5, "y":1},
- {"label":"k16", "x":6.5, "y":1},
- {"label":"k17", "x":7.5, "y":1},
- {"label":"k18", "x":8.5, "y":1},
- {"label":"k19", "x":9.5, "y":1},
- {"label":"k1a", "x":10.5, "y":1},
- {"label":"k1b", "x":11.5, "y":1},
- {"label":"k1c", "x":12.5, "y":1},
- {"label":"k1d", "x":13.5, "y":1, "w":1.5},
- {"label":"k20", "x":0, "y":2, "w":1.75},
- {"label":"k21", "x":1.75, "y":2},
- {"label":"k22", "x":2.75, "y":2},
- {"label":"k23", "x":3.75, "y":2},
- {"label":"k24", "x":4.75, "y":2},
- {"label":"k25", "x":5.75, "y":2},
- {"label":"k26", "x":6.75, "y":2},
- {"label":"k27", "x":7.75, "y":2},
- {"label":"k28", "x":8.75, "y":2},
- {"label":"k29", "x":9.75, "y":2},
- {"label":"k2a", "x":10.75, "y":2},
- {"label":"k2b", "x":11.75, "y":2},
- {"label":"k2d", "x":12.75, "y":2, "w":2.25},
- {"label":"k30", "x":0, "y":3, "w":2.25},
- {"label":"k32", "x":2.25, "y":3},
- {"label":"k33", "x":3.25, "y":3},
- {"label":"k34", "x":4.25, "y":3},
- {"label":"k35", "x":5.25, "y":3},
- {"label":"k36", "x":6.25, "y":3},
- {"label":"k37", "x":7.25, "y":3},
- {"label":"k38", "x":8.25, "y":3},
- {"label":"k39", "x":9.25, "y":3},
- {"label":"k3a", "x":10.25, "y":3},
- {"label":"k3b", "x":11.25, "y":3},
- {"label":"k3c", "x":12.25, "y":3, "w":1.75},
- {"label":"k3d", "x":14, "y":3},
- {"label":"k41", "x":1.5, "y":4},
- {"label":"k42", "x":2.5, "y":4, "w":1.5},
- {"label":"k46", "x":4, "y":4, "w":7},
- {"label":"k4b", "x":11, "y":4, "w":1.5},
- {"label":"k4c", "x":12.5, "y":4}
- ]
- },
- "LAYOUT_60_iso": {
- "key_count": 62,
- "layout": [
- {"label":"k00", "x":0, "y":0},
- {"label":"k01", "x":1, "y":0},
- {"label":"k02", "x":2, "y":0},
- {"label":"k03", "x":3, "y":0},
- {"label":"k04", "x":4, "y":0},
- {"label":"k05", "x":5, "y":0},
- {"label":"k06", "x":6, "y":0},
- {"label":"k07", "x":7, "y":0},
- {"label":"k08", "x":8, "y":0},
- {"label":"k09", "x":9, "y":0},
- {"label":"k0a", "x":10, "y":0},
- {"label":"k0b", "x":11, "y":0},
- {"label":"k0c", "x":12, "y":0},
- {"label":"k0e", "x":13, "y":0, "w":2},
- {"label":"k10", "x":0, "y":1, "w":1.5},
- {"label":"k11", "x":1.5, "y":1},
- {"label":"k12", "x":2.5, "y":1},
- {"label":"k13", "x":3.5, "y":1},
- {"label":"k14", "x":4.5, "y":1},
- {"label":"k15", "x":5.5, "y":1},
- {"label":"k16", "x":6.5, "y":1},
- {"label":"k17", "x":7.5, "y":1},
- {"label":"k18", "x":8.5, "y":1},
- {"label":"k19", "x":9.5, "y":1},
- {"label":"k1a", "x":10.5, "y":1},
- {"label":"k1b", "x":11.5, "y":1},
- {"label":"k1c", "x":12.5, "y":1},
- {"label":"k20", "x":0, "y":2, "w":1.75},
- {"label":"k21", "x":1.75, "y":2},
- {"label":"k22", "x":2.75, "y":2},
- {"label":"k23", "x":3.75, "y":2},
- {"label":"k24", "x":4.75, "y":2},
- {"label":"k25", "x":5.75, "y":2},
- {"label":"k26", "x":6.75, "y":2},
- {"label":"k27", "x":7.75, "y":2},
- {"label":"k28", "x":8.75, "y":2},
- {"label":"k29", "x":9.75, "y":2},
- {"label":"k2a", "x":10.75, "y":2},
- {"label":"k2b", "x":11.75, "y":2},
- {"label":"k2c", "x":12.75, "y":2},
- {"label":"k2d", "x":13.75, "y":1, "w":1.25, "h":2},
- {"label":"k30", "x":0, "y":3, "w":1.25},
- {"label":"k31", "x":1.25, "y":3},
- {"label":"k32", "x":2.25, "y":3},
- {"label":"k33", "x":3.25, "y":3},
- {"label":"k34", "x":4.25, "y":3},
- {"label":"k35", "x":5.25, "y":3},
- {"label":"k36", "x":6.25, "y":3},
- {"label":"k37", "x":7.25, "y":3},
- {"label":"k38", "x":8.25, "y":3},
- {"label":"k39", "x":9.25, "y":3},
- {"label":"k3a", "x":10.25, "y":3},
- {"label":"k3b", "x":11.25, "y":3},
- {"label":"k3c", "x":12.25, "y":3, "w":2.75},
- {"label":"k40", "x":0, "y":4, "w":1.25},
- {"label":"k41", "x":1.25, "y":4, "w":1.25},
- {"label":"k42", "x":2.5, "y":4, "w":1.25},
- {"label":"k46", "x":3.75, "y":4, "w":6.25},
- {"label":"k4a", "x":10, "y":4, "w":1.25},
- {"label":"k4b", "x":11.25, "y":4, "w":1.25},
- {"label":"k4c", "x":12.5, "y":4, "w":1.25},
- {"label":"k4d", "x":13.75, "y":4, "w":1.25}
- ]
- },
- "LAYOUT_60_iso_split_bs_rshift": {
- "key_count": 64,
- "layout": [
- {"label":"k00", "x":0, "y":0},
- {"label":"k01", "x":1, "y":0},
- {"label":"k02", "x":2, "y":0},
- {"label":"k03", "x":3, "y":0},
- {"label":"k04", "x":4, "y":0},
- {"label":"k05", "x":5, "y":0},
- {"label":"k06", "x":6, "y":0},
- {"label":"k07", "x":7, "y":0},
- {"label":"k08", "x":8, "y":0},
- {"label":"k09", "x":9, "y":0},
- {"label":"k0a", "x":10, "y":0},
- {"label":"k0b", "x":11, "y":0},
- {"label":"k0c", "x":12, "y":0},
- {"label":"k0d", "x":13, "y":0},
- {"label":"k0e", "x":14, "y":0},
- {"label":"k10", "x":0, "y":1, "w":1.5},
- {"label":"k11", "x":1.5, "y":1},
- {"label":"k12", "x":2.5, "y":1},
- {"label":"k13", "x":3.5, "y":1},
- {"label":"k14", "x":4.5, "y":1},
- {"label":"k15", "x":5.5, "y":1},
- {"label":"k16", "x":6.5, "y":1},
- {"label":"k17", "x":7.5, "y":1},
- {"label":"k18", "x":8.5, "y":1},
- {"label":"k19", "x":9.5, "y":1},
- {"label":"k1a", "x":10.5, "y":1},
- {"label":"k1b", "x":11.5, "y":1},
- {"label":"k1c", "x":12.5, "y":1},
- {"label":"k20", "x":0, "y":2, "w":1.75},
- {"label":"k21", "x":1.75, "y":2},
- {"label":"k22", "x":2.75, "y":2},
- {"label":"k23", "x":3.75, "y":2},
- {"label":"k24", "x":4.75, "y":2},
- {"label":"k25", "x":5.75, "y":2},
- {"label":"k26", "x":6.75, "y":2},
- {"label":"k27", "x":7.75, "y":2},
- {"label":"k28", "x":8.75, "y":2},
- {"label":"k29", "x":9.75, "y":2},
- {"label":"k2a", "x":10.75, "y":2},
- {"label":"k2b", "x":11.75, "y":2},
- {"label":"k2c", "x":12.75, "y":2},
- {"label":"k2d", "x":13.75, "y":1, "w":1.25, "h":2},
- {"label":"k30", "x":0, "y":3, "w":1.25},
- {"label":"k31", "x":1.25, "y":3},
- {"label":"k32", "x":2.25, "y":3},
- {"label":"k33", "x":3.25, "y":3},
- {"label":"k34", "x":4.25, "y":3},
- {"label":"k35", "x":5.25, "y":3},
- {"label":"k36", "x":6.25, "y":3},
- {"label":"k37", "x":7.25, "y":3},
- {"label":"k38", "x":8.25, "y":3},
- {"label":"k39", "x":9.25, "y":3},
- {"label":"k3a", "x":10.25, "y":3},
- {"label":"k3b", "x":11.25, "y":3},
- {"label":"k3c", "x":12.25, "y":3, "w":1.75},
- {"label":"k3d", "x":14, "y":3},
- {"label":"k40", "x":0, "y":4, "w":1.25},
- {"label":"k41", "x":1.25, "y":4, "w":1.25},
- {"label":"k42", "x":2.5, "y":4, "w":1.25},
- {"label":"k46", "x":3.75, "y":4, "w":6.25},
- {"label":"k4a", "x":10, "y":4, "w":1.25},
- {"label":"k4b", "x":11.25, "y":4, "w":1.25},
- {"label":"k4c", "x":12.5, "y":4, "w":1.25},
- {"label":"k4d", "x":13.75, "y":4, "w":1.25}
- ]
- }
- }
-}
+++ /dev/null
-/*
-Copyright 2019 Sebastian Spindler <sebastian.spindler@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* RGB Underglow */
-#define RGB_DI_PIN B7
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 30 // Number of LEDs
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
+++ /dev/null
-/*
-Copyright 2019 Sebastian Spindler <sebastian.spindler@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-#include "keymap_extras/keymap_german.h"
-
-//Layer renaming
-#define _DL 0 //default
-#define _FUN 1 //function layer
-#define _LED 2 //LED configurations
-
-//Keymapping renaming
-#define ______ KC_TRNS //renaming KC_TRNS for readability in keymaps
-#define RGB_MI RGB_MODE_FORWARD //increase RGB mode
-#define RGB_MD RGB_MODE_REVERSE //decrease RGB mode
-#define RGB_ST RGB_M_P //rgb static
-#define MONKEY LCTL(LALT(KC_DEL)) //ctrl+alt+del == monkey grip
-#define SPECIAL LT(_FUN, DE_CIRC) //
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- [_DL] = LAYOUT(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, DE_SS, DE_ACUT, ______, KC_BSPC, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, DE_Z, KC_U, KC_I, KC_O, KC_P, DE_UE, DE_PLUS, ______, \
- SPECIAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, DE_OE, DE_AE, DE_HASH, KC_ENT, \
- KC_LSFT, DE_LESS, DE_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, DE_MINS, KC_RSFT, MONKEY, \
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC , ______, KC_ALGR, TG(_LED), KC_RCTL ),
-
- [_FUN] = LAYOUT(
- ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ______, KC_DEL, \
- ______, KC_PGUP, KC_UP, KC_PGDN, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
- ______, KC_LEFT, KC_DOWN, KC_RIGHT, KC_HOME, ______, ______, KC_END, ______, ______, ______, ______, ______, ______, \
- ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_UP, ______, \
- ______, ______, ______, ______ , ______, KC_LEFT, KC_DOWN, KC_RIGHT ),
-
- [_LED] = LAYOUT(
- ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, RESET, \
- ______, RGB_TOG, RGB_MI, RGB_MD, RGB_ST, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
- ______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
- ______, ______, RGB_VAI, RGB_VAD, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
- ______, ______, ______, ______ , ______, ______, TG(_LED), ______ ),
-};
+++ /dev/null
-#Copyright 2019 Sebastian Spindler <sebastian.spindler@gmail.com>
-
-#This program is free software: you can redistribute it and/or modify
-#it under the terms of the GNU General Public License as published by
-#the Free Software Foundation, either version 2 of the License, or
-#(at your option) any later version.
-
-#This program is distributed in the hope that it will be useful,
-#but WITHOUT ANY WARRANTY; without even the implied warranty of
-#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#GNU General Public License for more details.
-
-#You should have received a copy of the GNU General Public License
-#along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870)
-RAW_ENABLE = no
-DYNAMIC_KEYMAP_ENABLE = no
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _MA 0
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[_MA] = LAYOUT(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \
- KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL)
-};
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _MA 0
-#define _FN 1
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[_FN] = LAYOUT(
- _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, \
- _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, \
- KC_CAPS, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______),
-
-[_MA] = LAYOUT(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
- LCTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \
- KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN) , \
- KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_RGUI, KC_RALT, KC_RCTRL)
-};
+++ /dev/null
-- Disable VIA
-- Tsangan bottom row
-- Split Backspace
-- Split Right shift
-- RESET, F keys, and Cursors (WASD), DEL, Capslock on layer
-- Capslock -> LCTL_T(KC_ESC)
-- Bootmagic lite
-- Command enabled
-- Console enabled
+++ /dev/null
-BOOTMAGIC = lite
-DYNAMIC_KEYMAP_ENABLE = no
-CONSOLE_ENABLE = yes
-COMMAND_ENABLE = yes
+++ /dev/null
-#include "plain60.h"
+++ /dev/null
-#pragma once
-
-#include "quantum.h"
-
-// readability
-#define XXX KC_NO
-
-#define LAYOUT( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
- k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
- k40, k41, k42, k46, k4a, k4b, k4c, k4d \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \
- {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX}, \
- {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX}, \
- {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \
-}
-
-#define LAYOUT_60_ansi( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
- k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
- k40, k41, k42, k46, k4a, k4b, k4c, k4d \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX, k0e}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \
- {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, XXX}, \
- {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX, XXX}, \
- {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \
-}
-
-#define LAYOUT_60_ansi_split_bs_rshift( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
- k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
- k40, k41, k42, k46, k4a, k4b, k4c, k4d \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \
- {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, XXX}, \
- {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX, XXX}, \
- {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \
-}
-
-#define LAYOUT_60_hhkb( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
- k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
- k41, k42, k46, k4b, k4c \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \
- {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, XXX}, \
- {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX, XXX}, \
- {XXX, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4b, k4c, XXX, XXX} \
-}
-
-#define LAYOUT_60_iso( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
- k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
- k40, k41, k42, k46, k4a, k4b, k4c, k4d \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX, k0e}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, XXX}, \
- {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX}, \
- {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX, XXX}, \
- {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \
-}
-
-#define LAYOUT_60_iso_split_bs_rshift( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
- k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
- k40, k41, k42, k46, k4a, k4b, k4c, k4d \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, XXX}, \
- {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX}, \
- {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX}, \
- {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \
-}
-
-void matrix_init_user(void);
-void matrix_scan_user(void);
+++ /dev/null
-Plain60-C and Plain60-B
-======
-
-A plain 60% PCB with USB-C.
-
-Keyboard Maintainer: Maartenwut
-Hardware Supported: Plain60-C and Plain60-B
-Hardware Availability: https://github.com/Maartenwut/plain60-c
-
-Make example for this keyboard (after setting up your build environment):
-
- make plain60:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+++ /dev/null
-SRC += keyboards/wilba_tech/wt_main.c
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-
-LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_iso
+++ /dev/null
-/*
-Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x4705
-#define PRODUCT_ID 0x7465
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Maartenwut
-#define PRODUCT TA-65
-#define DESCRIPTION A universal 65% PCB with underglow.
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 16
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS {B4,D7,D6,D4,B3}
-#define MATRIX_COL_PINS {D2,D1,D0,D3,D5,C7,C6,B6,B5,F0,F1,F4,F5,F6,F7,B0}
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* Backlight configuration
- */
-#define RGB_DI_PIN E6
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 8
-
-#define QMK_ESC_OUTPUT D2 // usually COL
-#define QMK_ESC_INPUT B4 // usually ROW
-#define QMK_LED E6
+++ /dev/null
-{
- "keyboard_name": "ta65",
- "url": "",
- "maintainer": "qmk",
- "width": 16,
- "height": 5,
- "layouts": {
- "LAYOUT_all": {
- "layout": [
- {"label":"Esc", "x":0, "y":0},
- {"label":"!", "x":1, "y":0},
- {"label":"@", "x":2, "y":0},
- {"label":"#", "x":3, "y":0},
- {"label":"$", "x":4, "y":0},
- {"label":"%", "x":5, "y":0},
- {"label":"^", "x":6, "y":0},
- {"label":"&", "x":7, "y":0},
- {"label":"*", "x":8, "y":0},
- {"label":"(", "x":9, "y":0},
- {"label":")", "x":10, "y":0},
- {"label":"_", "x":11, "y":0},
- {"label":"+", "x":12, "y":0},
- {"label":"|", "x":13, "y":0},
- {"label":"Backspace", "x":14, "y":0},
- {"label":"~", "x":15, "y":0},
- {"label":"Tab", "x":0, "y":1, "w":1.5},
- {"label":"Q", "x":1.5, "y":1},
- {"label":"W", "x":2.5, "y":1},
- {"label":"E", "x":3.5, "y":1},
- {"label":"R", "x":4.5, "y":1},
- {"label":"T", "x":5.5, "y":1},
- {"label":"Y", "x":6.5, "y":1},
- {"label":"U", "x":7.5, "y":1},
- {"label":"I", "x":8.5, "y":1},
- {"label":"O", "x":9.5, "y":1},
- {"label":"P", "x":10.5, "y":1},
- {"label":"{", "x":11.5, "y":1},
- {"label":"}", "x":12.5, "y":1},
- {"label":"|", "x":13.5, "y":1, "w":1.5},
- {"label":"Delete", "x":15, "y":1},
- {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
- {"label":"A", "x":1.75, "y":2},
- {"label":"S", "x":2.75, "y":2},
- {"label":"D", "x":3.75, "y":2},
- {"label":"F", "x":4.75, "y":2},
- {"label":"G", "x":5.75, "y":2},
- {"label":"H", "x":6.75, "y":2},
- {"label":"J", "x":7.75, "y":2},
- {"label":"K", "x":8.75, "y":2},
- {"label":"L", "x":9.75, "y":2},
- {"label":":", "x":10.75, "y":2},
- {"label":"\"", "x":11.75, "y":2},
- {"label":"Non-US Hash", "x":12.75, "y":2},
- {"label":"Enter", "x":13.75, "y":2, "w":1.25},
- {"label":"PgUp", "x":15, "y":2},
- {"label":"Shift", "x":0, "y":3, "w":1.25},
- {"label":"Non-US Backslash", "x":1.25, "y":3},
- {"label":"Z", "x":2.25, "y":3},
- {"label":"X", "x":3.25, "y":3},
- {"label":"C", "x":4.25, "y":3},
- {"label":"V", "x":5.25, "y":3},
- {"label":"B", "x":6.25, "y":3},
- {"label":"N", "x":7.25, "y":3},
- {"label":"M", "x":8.25, "y":3},
- {"label":"<", "x":9.25, "y":3},
- {"label":">", "x":10.25, "y":3},
- {"label":"?", "x":11.25, "y":3},
- {"label":"Shift", "x":12.25, "y":3, "w":1.75},
- {"label":"Up", "x":14, "y":3},
- {"label":"PgDn", "x":15, "y":3},
- {"label":"Ctrl", "x":0, "y":4, "w":1.25},
- {"label":"Win", "x":1.25, "y":4, "w":1.25},
- {"label":"Alt", "x":2.5, "y":4, "w":1.25},
- {"label":"Space", "x":3.75, "y":4, "w":6.25},
- {"label":"Alt", "x":10, "y":4},
- {"label":"Win", "x":11, "y":4},
- {"label":"Ctrl", "x":12, "y":4},
- {"label":"Left", "x":13, "y":4},
- {"label":"Down", "x":14, "y":4},
- {"label":"Right", "x":15, "y":4}
- ]
- },
- "LAYOUT_65_ansi": {
- "layout": [
- {"label":"Esc", "x":0, "y":0},
- {"label":"!", "x":1, "y":0},
- {"label":"@", "x":2, "y":0},
- {"label":"#", "x":3, "y":0},
- {"label":"$", "x":4, "y":0},
- {"label":"%", "x":5, "y":0},
- {"label":"^", "x":6, "y":0},
- {"label":"&", "x":7, "y":0},
- {"label":"*", "x":8, "y":0},
- {"label":"(", "x":9, "y":0},
- {"label":")", "x":10, "y":0},
- {"label":"_", "x":11, "y":0},
- {"label":"+", "x":12, "y":0},
- {"label":"Backspace", "x":13, "y":0, "w":2},
- {"label":"~", "x":15, "y":0},
- {"label":"Tab", "x":0, "y":1, "w":1.5},
- {"label":"Q", "x":1.5, "y":1},
- {"label":"W", "x":2.5, "y":1},
- {"label":"E", "x":3.5, "y":1},
- {"label":"R", "x":4.5, "y":1},
- {"label":"T", "x":5.5, "y":1},
- {"label":"Y", "x":6.5, "y":1},
- {"label":"U", "x":7.5, "y":1},
- {"label":"I", "x":8.5, "y":1},
- {"label":"O", "x":9.5, "y":1},
- {"label":"P", "x":10.5, "y":1},
- {"label":"{", "x":11.5, "y":1},
- {"label":"}", "x":12.5, "y":1},
- {"label":"|", "x":13.5, "y":1, "w":1.5},
- {"label":"Delete", "x":15, "y":1},
- {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
- {"label":"A", "x":1.75, "y":2},
- {"label":"S", "x":2.75, "y":2},
- {"label":"D", "x":3.75, "y":2},
- {"label":"F", "x":4.75, "y":2},
- {"label":"G", "x":5.75, "y":2},
- {"label":"H", "x":6.75, "y":2},
- {"label":"J", "x":7.75, "y":2},
- {"label":"K", "x":8.75, "y":2},
- {"label":"L", "x":9.75, "y":2},
- {"label":":", "x":10.75, "y":2},
- {"label":"\"", "x":11.75, "y":2},
- {"label":"Enter", "x":12.75, "y":2, "w":2.25},
- {"label":"PgUp", "x":15, "y":2},
- {"label":"Shift", "x":0, "y":3, "w":2.25},
- {"label":"Z", "x":2.25, "y":3},
- {"label":"X", "x":3.25, "y":3},
- {"label":"C", "x":4.25, "y":3},
- {"label":"V", "x":5.25, "y":3},
- {"label":"B", "x":6.25, "y":3},
- {"label":"N", "x":7.25, "y":3},
- {"label":"M", "x":8.25, "y":3},
- {"label":"<", "x":9.25, "y":3},
- {"label":">", "x":10.25, "y":3},
- {"label":"?", "x":11.25, "y":3},
- {"label":"Shift", "x":12.25, "y":3, "w":1.75},
- {"label":"Up", "x":14, "y":3},
- {"label":"PgDn", "x":15, "y":3},
- {"label":"Ctrl", "x":0, "y":4, "w":1.25},
- {"label":"Win", "x":1.25, "y":4, "w":1.25},
- {"label":"Alt", "x":2.5, "y":4, "w":1.25},
- {"label":"Space", "x":3.75, "y":4, "w":6.25},
- {"label":"Alt", "x":10, "y":4},
- {"label":"Win", "x":11, "y":4},
- {"label":"Ctrl", "x":12, "y":4},
- {"label":"Left", "x":13, "y":4},
- {"label":"Down", "x":14, "y":4},
- {"label":"Right", "x":15, "y":4}
- ]
- },
- "LAYOUT_ansi_tsangan": {
- "layout": [
- {"label":"Esc", "x":0, "y":0},
- {"label":"!", "x":1, "y":0},
- {"label":"@", "x":2, "y":0},
- {"label":"#", "x":3, "y":0},
- {"label":"$", "x":4, "y":0},
- {"label":"%", "x":5, "y":0},
- {"label":"^", "x":6, "y":0},
- {"label":"&", "x":7, "y":0},
- {"label":"*", "x":8, "y":0},
- {"label":"(", "x":9, "y":0},
- {"label":")", "x":10, "y":0},
- {"label":"_", "x":11, "y":0},
- {"label":"+", "x":12, "y":0},
- {"label":"|", "x":13, "y":0},
- {"label":"Backspace", "x":14, "y":0},
- {"label":"~", "x":15, "y":0},
- {"label":"Tab", "x":0, "y":1, "w":1.5},
- {"label":"Q", "x":1.5, "y":1},
- {"label":"W", "x":2.5, "y":1},
- {"label":"E", "x":3.5, "y":1},
- {"label":"R", "x":4.5, "y":1},
- {"label":"T", "x":5.5, "y":1},
- {"label":"Y", "x":6.5, "y":1},
- {"label":"U", "x":7.5, "y":1},
- {"label":"I", "x":8.5, "y":1},
- {"label":"O", "x":9.5, "y":1},
- {"label":"P", "x":10.5, "y":1},
- {"label":"{", "x":11.5, "y":1},
- {"label":"}", "x":12.5, "y":1},
- {"label":"|", "x":13.5, "y":1, "w":1.5},
- {"label":"Delete", "x":15, "y":1},
- {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
- {"label":"A", "x":1.75, "y":2},
- {"label":"S", "x":2.75, "y":2},
- {"label":"D", "x":3.75, "y":2},
- {"label":"F", "x":4.75, "y":2},
- {"label":"G", "x":5.75, "y":2},
- {"label":"H", "x":6.75, "y":2},
- {"label":"J", "x":7.75, "y":2},
- {"label":"K", "x":8.75, "y":2},
- {"label":"L", "x":9.75, "y":2},
- {"label":":", "x":10.75, "y":2},
- {"label":"\"", "x":11.75, "y":2},
- {"label":"Enter", "x":12.75, "y":2, "w":2.25},
- {"label":"PgUp", "x":15, "y":2},
- {"label":"Shift", "x":0, "y":3, "w":2.25},
- {"label":"Z", "x":2.25, "y":3},
- {"label":"X", "x":3.25, "y":3},
- {"label":"C", "x":4.25, "y":3},
- {"label":"V", "x":5.25, "y":3},
- {"label":"B", "x":6.25, "y":3},
- {"label":"N", "x":7.25, "y":3},
- {"label":"M", "x":8.25, "y":3},
- {"label":"<", "x":9.25, "y":3},
- {"label":">", "x":10.25, "y":3},
- {"label":"?", "x":11.25, "y":3},
- {"label":"Shift", "x":12.25, "y":3, "w":1.75},
- {"label":"Up", "x":14, "y":3},
- {"label":"PgDn", "x":15, "y":3},
- {"label":"Ctrl", "x":0, "y":4, "w":1.5},
- {"label":"Win", "x":1.5, "y":4},
- {"label":"Alt", "x":2.5, "y":4, "w":1.5},
- {"label":"Space", "x":4, "y":4, "w":7},
- {"label":"Alt", "x":11, "y":4, "w":1.5},
- {"label":"Left", "x":13, "y":4},
- {"label":"Down", "x":14, "y":4},
- {"label":"Right", "x":15, "y":4}
- ]
- },
- "LAYOUT_65_iso": {
- "layout": [
- {"label":"Esc", "x":0, "y":0},
- {"label":"!", "x":1, "y":0},
- {"label":"\"", "x":2, "y":0},
- {"label":"\u00a3", "x":3, "y":0},
- {"label":"$", "x":4, "y":0},
- {"label":"%", "x":5, "y":0},
- {"label":"^", "x":6, "y":0},
- {"label":"&", "x":7, "y":0},
- {"label":"*", "x":8, "y":0},
- {"label":"(", "x":9, "y":0},
- {"label":")", "x":10, "y":0},
- {"label":"_", "x":11, "y":0},
- {"label":"+", "x":12, "y":0},
- {"label":"Backspace", "x":13, "y":0, "w":2},
- {"label":"\u00ac", "x":15, "y":0},
- {"label":"Tab", "x":0, "y":1, "w":1.5},
- {"label":"Q", "x":1.5, "y":1},
- {"label":"W", "x":2.5, "y":1},
- {"label":"E", "x":3.5, "y":1},
- {"label":"R", "x":4.5, "y":1},
- {"label":"T", "x":5.5, "y":1},
- {"label":"Y", "x":6.5, "y":1},
- {"label":"U", "x":7.5, "y":1},
- {"label":"I", "x":8.5, "y":1},
- {"label":"O", "x":9.5, "y":1},
- {"label":"P", "x":10.5, "y":1},
- {"label":"{", "x":11.5, "y":1},
- {"label":"}", "x":12.5, "y":1},
- {"label":"Delete", "x":15, "y":1},
- {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
- {"label":"A", "x":1.75, "y":2},
- {"label":"S", "x":2.75, "y":2},
- {"label":"D", "x":3.75, "y":2},
- {"label":"F", "x":4.75, "y":2},
- {"label":"G", "x":5.75, "y":2},
- {"label":"H", "x":6.75, "y":2},
- {"label":"J", "x":7.75, "y":2},
- {"label":"K", "x":8.75, "y":2},
- {"label":"L", "x":9.75, "y":2},
- {"label":":", "x":10.75, "y":2},
- {"label":"@", "x":11.75, "y":2},
- {"label":"~", "x":12.75, "y":2},
- {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
- {"label":"PgUp", "x":15, "y":2},
- {"label":"Shift", "x":0, "y":3, "w":1.25},
- {"label":"|", "x":1.25, "y":3},
- {"label":"Z", "x":2.25, "y":3},
- {"label":"X", "x":3.25, "y":3},
- {"label":"C", "x":4.25, "y":3},
- {"label":"V", "x":5.25, "y":3},
- {"label":"B", "x":6.25, "y":3},
- {"label":"N", "x":7.25, "y":3},
- {"label":"M", "x":8.25, "y":3},
- {"label":"<", "x":9.25, "y":3},
- {"label":">", "x":10.25, "y":3},
- {"label":"?", "x":11.25, "y":3},
- {"label":"Shift", "x":12.25, "y":3, "w":1.75},
- {"label":"Up", "x":14, "y":3},
- {"label":"PgDn", "x":15, "y":3},
- {"label":"Ctrl", "x":0, "y":4, "w":1.25},
- {"label":"Win", "x":1.25, "y":4, "w":1.25},
- {"label":"Alt", "x":2.5, "y":4, "w":1.25},
- {"label":"Space", "x":3.75, "y":4, "w":6.25},
- {"label":"AltGr", "x":10, "y":4},
- {"label":"Win", "x":11, "y":4},
- {"label":"Ctrl", "x":12, "y":4},
- {"label":"Left", "x":13, "y":4},
- {"label":"Down", "x":14, "y":4},
- {"label":"Right", "x":15, "y":4}
- ]
- },
- "LAYOUT_iso_tsangan": {
- "layout": [
- {"label":"Esc", "x":0, "y":0},
- {"label":"!", "x":1, "y":0},
- {"label":"\"", "x":2, "y":0},
- {"label":"\u00a3", "x":3, "y":0},
- {"label":"$", "x":4, "y":0},
- {"label":"%", "x":5, "y":0},
- {"label":"^", "x":6, "y":0},
- {"label":"&", "x":7, "y":0},
- {"label":"*", "x":8, "y":0},
- {"label":"(", "x":9, "y":0},
- {"label":")", "x":10, "y":0},
- {"label":"_", "x":11, "y":0},
- {"label":"+", "x":12, "y":0},
- {"label":"~", "x":13, "y":0},
- {"label":"Backspace", "x":14, "y":0},
- {"label":"\u00ac", "x":15, "y":0},
- {"label":"Tab", "x":0, "y":1, "w":1.5},
- {"label":"Q", "x":1.5, "y":1},
- {"label":"W", "x":2.5, "y":1},
- {"label":"E", "x":3.5, "y":1},
- {"label":"R", "x":4.5, "y":1},
- {"label":"T", "x":5.5, "y":1},
- {"label":"Y", "x":6.5, "y":1},
- {"label":"U", "x":7.5, "y":1},
- {"label":"I", "x":8.5, "y":1},
- {"label":"O", "x":9.5, "y":1},
- {"label":"P", "x":10.5, "y":1},
- {"label":"{", "x":11.5, "y":1},
- {"label":"}", "x":12.5, "y":1},
- {"label":"Delete", "x":15, "y":1},
- {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
- {"label":"A", "x":1.75, "y":2},
- {"label":"S", "x":2.75, "y":2},
- {"label":"D", "x":3.75, "y":2},
- {"label":"F", "x":4.75, "y":2},
- {"label":"G", "x":5.75, "y":2},
- {"label":"H", "x":6.75, "y":2},
- {"label":"J", "x":7.75, "y":2},
- {"label":"K", "x":8.75, "y":2},
- {"label":"L", "x":9.75, "y":2},
- {"label":":", "x":10.75, "y":2},
- {"label":"@", "x":11.75, "y":2},
- {"label":"~", "x":12.75, "y":2},
- {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
- {"label":"PgUp", "x":15, "y":2},
- {"label":"Shift", "x":0, "y":3, "w":1.25},
- {"label":"|", "x":1.25, "y":3},
- {"label":"Z", "x":2.25, "y":3},
- {"label":"X", "x":3.25, "y":3},
- {"label":"C", "x":4.25, "y":3},
- {"label":"V", "x":5.25, "y":3},
- {"label":"B", "x":6.25, "y":3},
- {"label":"N", "x":7.25, "y":3},
- {"label":"M", "x":8.25, "y":3},
- {"label":"<", "x":9.25, "y":3},
- {"label":">", "x":10.25, "y":3},
- {"label":"?", "x":11.25, "y":3},
- {"label":"Shift", "x":12.25, "y":3, "w":1.75},
- {"label":"Up", "x":14, "y":3},
- {"label":"PgDn", "x":15, "y":3},
- {"label":"Ctrl", "x":0, "y":4, "w":1.5},
- {"label":"Win", "x":1.5, "y":4},
- {"label":"Alt", "x":2.5, "y":4, "w":1.5},
- {"label":"Space", "x":4, "y":4, "w":7},
- {"label":"AltGr", "x":11, "y":4, "w":1.5},
- {"label":"Left", "x":13, "y":4},
- {"label":"Down", "x":14, "y":4},
- {"label":"Right", "x":15, "y":4}
- ]
- }
- }
-}
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _MA 0
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[_MA] = LAYOUT_all(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_GRV,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP,
- KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT)
-};
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _MA 0
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[_MA] = LAYOUT_65_ansi(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT)
-};
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _MA 0
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[_MA] = LAYOUT_ansi_tsangan(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_GRV,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT)
-};
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _MA 0
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[_MA] = LAYOUT_65_iso(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP,
- KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT)
-};
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _MA 0
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[_MA] = LAYOUT_iso_tsangan(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_GRV,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP,
- KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT)
-};
+++ /dev/null
-#pragma once
-
-#define RETRO_TAPPING
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-enum {
- _MA,
- _GA,
- _FL,
- _SP
-};
-
-#define SPACE LT(_SP, KC_SPC)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[_MA] = LAYOUT_65_ansi(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MPLY,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
- KC_CAPS, KC_LGUI, KC_LALT, SPACE, KC_RALT, KC_RCTRL,MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
-
-[_GA] = LAYOUT_65_ansi(
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______, _______),
-
-[_FL] = LAYOUT_65_ansi(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RESET, KC_PSCR,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS,
- _______, _______, _______, _______, _______, TG(_GA), _______, _______, _______, _______, _______, _______, _______, KC_HOME,
- _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_END,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
-
-[_SP] = LAYOUT_65_ansi(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
-};
+++ /dev/null
-TA-65
-=====
-
-A 65% PCB designed to fit the TADA68, Kayak and others by [maartenwut](https://maartenwut.com).
-
-
-
-Keyboard Maintainer: QMK Community<br>
-Hardware Supported: TA-65 PCB<br>
-Hardware Availability: [maartenwut.com](https://maartenwut.com/product/ta-65/)<br>
-
-Make example for this keyboard (after setting up your build environment):
-
- make ta65:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
+++ /dev/null
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-BOOTLOADER = qmk-dfu
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-
-LAYOUTS = 65_ansi 65_iso
+++ /dev/null
-#include "ta65.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- matrix_init_user();
-};
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
- matrix_scan_user();
-};
+++ /dev/null
-#pragma once
-#include "quantum.h"
-
-// readability
-#define ___ KC_NO
-#define LAYOUT_all( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, k0e, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
- k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
- k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, ___}, \
- {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, ___}, \
- {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \
- {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, k4a, k4b, k4c, k4d, k4e, ___} \
-}
-
-#define LAYOUT_65_ansi( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
- k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
- k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, ___}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, ___}, \
- {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, ___, k2d, k2e, ___}, \
- {k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \
- {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, k4a, k4b, k4c, k4d, k4e, ___} \
-}
-
-#define LAYOUT_ansi_tsangan( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, k0e, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
- k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
- k40, k41, k42, k46, k49, k4c, k4d, k4e \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, ___}, \
- {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, ___, k2d, k2e, ___}, \
- {k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \
- {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, ___, ___, k4c, k4d, k4e, ___} \
-}
-
-#define LAYOUT_iso_tsangan( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, k0e, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
- k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
- k40, k41, k42, k46, k49, k4c, k4d, k4e \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, ___, k1e, ___}, \
- {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, ___}, \
- {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \
- {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, ___, ___, k4c, k4d, k4e, ___} \
-}
-
-#define LAYOUT_65_iso( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
- k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
- k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \
-) \
-{ \
- {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, ___}, \
- {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, ___}, \
- {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, ___}, \
- {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \
- {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, k4a, k4b, k4c, k4d, k4e, ___} \
-}
-
-void matrix_init_user(void);
-void matrix_scan_user(void);
+++ /dev/null
-/*
-Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x0000
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Maartenwut
-#define PRODUCT Wasdat
-#define DESCRIPTION Custom controller for the WASD v2 TKL and 104
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 16
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D6, D4, F6, F7, F4, F5, F0, F1 }
-#define MATRIX_COL_PINS { }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
-// For QMK DFU
-#define QMK_ESC_OUTPUT D6
-#define QMK_ESC_INPUT D7
-#define QMK_LED B0
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-// #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-// #define RGBLIGHT_EFFECT_BREATHING
-// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-// #define RGBLIGHT_EFFECT_SNAKE
-// #define RGBLIGHT_EFFECT_KNIGHT
-// #define RGBLIGHT_EFFECT_CHRISTMAS
-// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-// #define RGBLIGHT_EFFECT_RGB_TEST
-// #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP H
-//#define MAGIC_KEY_HELP_ALT SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER0_ALT GRAVE
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER B
-//#define MAGIC_KEY_BOOTLOADER_ALT ESC
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
- - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
- - MIDI notes can be added to the keymap
- - Octave shift and transpose
- - Virtual sustain, portamento, and modulation wheel
- - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
+++ /dev/null
-{
- "keyboard_name": "Wasdat",
- "url": "https://maartenwut.com/product/wasdat/",
- "maintainer": "Maartenwut",
- "width": 22.5,
- "height": 6.5,
- "layouts": {
- "LAYOUT_fullsize_ansi": {
- "layout": [
- {"label":"Esc", "x":0, "y":0},
- {"label":"F1", "x":2, "y":0},
- {"label":"F2", "x":3, "y":0},
- {"label":"F3", "x":4, "y":0},
- {"label":"F4", "x":5, "y":0},
- {"label":"F5", "x":6.5, "y":0},
- {"label":"F6", "x":7.5, "y":0},
- {"label":"F7", "x":8.5, "y":0},
- {"label":"F8", "x":9.5, "y":0},
- {"label":"F9", "x":11, "y":0},
- {"label":"F10", "x":12, "y":0},
- {"label":"F11", "x":13, "y":0},
- {"label":"F12", "x":14, "y":0},
-
- {"label":"PrtSc", "x":15.25, "y":0},
- {"label":"Scroll Lock", "x":16.25, "y":0},
- {"label":"Pause", "x":17.25, "y":0},
-
- {"label":"~", "x":0, "y":1.5},
- {"label":"1", "x":1, "y":1.5},
- {"label":"2", "x":2, "y":1.5},
- {"label":"3", "x":3, "y":1.5},
- {"label":"4", "x":4, "y":1.5},
- {"label":"5", "x":5, "y":1.5},
- {"label":"6", "x":6, "y":1.5},
- {"label":"7", "x":7, "y":1.5},
- {"label":"8", "x":8, "y":1.5},
- {"label":"9", "x":9, "y":1.5},
- {"label":"0", "x":10, "y":1.5},
- {"label":"_", "x":11, "y":1.5},
- {"label":"+", "x":12, "y":1.5},
- {"label":"Backspace", "x":13, "y":1.5, "w":2},
-
- {"label":"Insert", "x":15.25, "y":1.5},
- {"label":"Home", "x":16.25, "y":1.5},
- {"label":"PgUp", "x":17.25, "y":1.5},
-
- {"label":"Num Lock", "x":18.5, "y":1.5},
- {"label":"/", "x":19.5, "y":1.5},
- {"label":"*", "x":20.5, "y":1.5},
- {"label":"-", "x":21.5, "y":1.5},
-
- {"label":"Tab", "x":0, "y":2.5, "w":1.5},
- {"label":"Q", "x":1.5, "y":2.5},
- {"label":"W", "x":2.5, "y":2.5},
- {"label":"E", "x":3.5, "y":2.5},
- {"label":"R", "x":4.5, "y":2.5},
- {"label":"T", "x":5.5, "y":2.5},
- {"label":"Y", "x":6.5, "y":2.5},
- {"label":"U", "x":7.5, "y":2.5},
- {"label":"I", "x":8.5, "y":2.5},
- {"label":"O", "x":9.5, "y":2.5},
- {"label":"P", "x":10.5, "y":2.5},
- {"label":"{", "x":11.5, "y":2.5},
- {"label":"}", "x":12.5, "y":2.5},
- {"label":"|", "x":13.5, "y":2.5, "w":1.5},
-
- {"label":"Delete", "x":15.25, "y":2.5},
- {"label":"End", "x":16.25, "y":2.5},
- {"label":"PgDn", "x":17.25, "y":2.5},
-
- {"label":"7", "x":18.5, "y":2.5},
- {"label":"8", "x":19.5, "y":2.5},
- {"label":"9", "x":20.5, "y":2.5},
- {"label":"+", "x":21.5, "y":2.5, "h":2},
-
- {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
- {"label":"A", "x":1.75, "y":3.5},
- {"label":"S", "x":2.75, "y":3.5},
- {"label":"D", "x":3.75, "y":3.5},
- {"label":"F", "x":4.75, "y":3.5},
- {"label":"G", "x":5.75, "y":3.5},
- {"label":"H", "x":6.75, "y":3.5},
- {"label":"J", "x":7.75, "y":3.5},
- {"label":"K", "x":8.75, "y":3.5},
- {"label":"L", "x":9.75, "y":3.5},
- {"label":":", "x":10.75, "y":3.5},
- {"label":"\"", "x":11.75, "y":3.5},
- {"label":"Enter", "x":12.75, "y":3.5, "w":2.25},
-
- {"label":"4", "x":18.5, "y":3.5},
- {"label":"5", "x":19.5, "y":3.5},
- {"label":"6", "x":20.5, "y":3.5},
-
- {"label":"Shift", "x":0, "y":4.5, "w":2.25},
- {"label":"Z", "x":2.25, "y":4.5},
- {"label":"X", "x":3.25, "y":4.5},
- {"label":"C", "x":4.25, "y":4.5},
- {"label":"V", "x":5.25, "y":4.5},
- {"label":"B", "x":6.25, "y":4.5},
- {"label":"N", "x":7.25, "y":4.5},
- {"label":"M", "x":8.25, "y":4.5},
- {"label":"<", "x":9.25, "y":4.5},
- {"label":">", "x":10.25, "y":4.5},
- {"label":"?", "x":11.25, "y":4.5},
- {"label":"Shift", "x":12.25, "y":4.5, "w":2.75},
-
- {"label":"\u2191", "x":16.25, "y":4.5},
-
- {"label":"1", "x":18.5, "y":4.5},
- {"label":"2", "x":19.5, "y":4.5},
- {"label":"3", "x":20.5, "y":4.5},
- {"label":"Enter", "x":21.5, "y":4.5, "h":2},
-
- {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
- {"label":"Win", "x":1.25, "y":5.5, "w":1.25},
- {"label":"Alt", "x":2.5, "y":5.5, "w":1.25},
- {"x":3.75, "y":5.5, "w":6.25},
- {"label":"Alt", "x":10, "y":5.5, "w":1.25},
- {"label":"Win", "x":11.25, "y":5.5, "w":1.25},
- {"label":"Menu", "x":12.5, "y":5.5, "w":1.25},
- {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25},
-
- {"label":"\u2190", "x":15.25, "y":5.5},
- {"label":"\u2193", "x":16.25, "y":5.5},
- {"label":"\u2192", "x":17.25, "y":5.5},
-
- {"label":"0", "x":18.5, "y":5.5, "w":2},
- {"label":".", "x":20.5, "y":5.5}
- ]
- },
- "LAYOUT_fullsize_iso": {
- "layout": [
- {"label":"Esc", "x":0, "y":0},
- {"label":"F1", "x":2, "y":0},
- {"label":"F2", "x":3, "y":0},
- {"label":"F3", "x":4, "y":0},
- {"label":"F4", "x":5, "y":0},
- {"label":"F5", "x":6.5, "y":0},
- {"label":"F6", "x":7.5, "y":0},
- {"label":"F7", "x":8.5, "y":0},
- {"label":"F8", "x":9.5, "y":0},
- {"label":"F9", "x":11, "y":0},
- {"label":"F10", "x":12, "y":0},
- {"label":"F11", "x":13, "y":0},
- {"label":"F12", "x":14, "y":0},
-
- {"label":"PrtSc", "x":15.25, "y":0},
- {"label":"Scroll Lock", "x":16.25, "y":0},
- {"label":"Pause", "x":17.25, "y":0},
-
- {"label":"\u00ac", "x":0, "y":1.5},
- {"label":"!", "x":1, "y":1.5},
- {"label":"\"", "x":2, "y":1.5},
- {"label":"\u00a3", "x":3, "y":1.5},
- {"label":"$", "x":4, "y":1.5},
- {"label":"%", "x":5, "y":1.5},
- {"label":"^", "x":6, "y":1.5},
- {"label":"&", "x":7, "y":1.5},
- {"label":"*", "x":8, "y":1.5},
- {"label":"(", "x":9, "y":1.5},
- {"label":")", "x":10, "y":1.5},
- {"label":"_", "x":11, "y":1.5},
- {"label":"+", "x":12, "y":1.5},
- {"label":"Backspace", "x":13, "y":1.5, "w":2},
-
- {"label":"Insert", "x":15.25, "y":1.5},
- {"label":"Home", "x":16.25, "y":1.5},
- {"label":"PgUp", "x":17.25, "y":1.5},
-
- {"label":"Num Lock", "x":18.5, "y":1.5},
- {"label":"/", "x":19.5, "y":1.5},
- {"label":"*", "x":20.5, "y":1.5},
- {"label":"-", "x":21.5, "y":1.5},
-
- {"label":"Tab", "x":0, "y":2.5, "w":1.5},
- {"label":"Q", "x":1.5, "y":2.5},
- {"label":"W", "x":2.5, "y":2.5},
- {"label":"E", "x":3.5, "y":2.5},
- {"label":"R", "x":4.5, "y":2.5},
- {"label":"T", "x":5.5, "y":2.5},
- {"label":"Y", "x":6.5, "y":2.5},
- {"label":"U", "x":7.5, "y":2.5},
- {"label":"I", "x":8.5, "y":2.5},
- {"label":"O", "x":9.5, "y":2.5},
- {"label":"P", "x":10.5, "y":2.5},
- {"label":"{", "x":11.5, "y":2.5},
- {"label":"}", "x":12.5, "y":2.5},
- {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2},
-
- {"label":"Delete", "x":15.25, "y":2.5},
- {"label":"End", "x":16.25, "y":2.5},
- {"label":"PgDn", "x":17.25, "y":2.5},
-
- {"label":"7", "x":18.5, "y":2.5},
- {"label":"8", "x":19.5, "y":2.5},
- {"label":"9", "x":20.5, "y":2.5},
- {"label":"+", "x":21.5, "y":2.5, "h":2},
-
- {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
- {"label":"A", "x":1.75, "y":3.5},
- {"label":"S", "x":2.75, "y":3.5},
- {"label":"D", "x":3.75, "y":3.5},
- {"label":"F", "x":4.75, "y":3.5},
- {"label":"G", "x":5.75, "y":3.5},
- {"label":"H", "x":6.75, "y":3.5},
- {"label":"J", "x":7.75, "y":3.5},
- {"label":"K", "x":8.75, "y":3.5},
- {"label":"L", "x":9.75, "y":3.5},
- {"label":":", "x":10.75, "y":3.5},
- {"label":"@", "x":11.75, "y":3.5},
- {"label":"~", "x":12.75, "y":3.5},
-
- {"label":"4", "x":18.5, "y":3.5},
- {"label":"5", "x":19.5, "y":3.5},
- {"label":"6", "x":20.5, "y":3.5},
-
- {"label":"Shift", "x":0, "y":4.5, "w":1.25},
- {"label":"|", "x":1.25, "y":4.5},
- {"label":"Z", "x":2.25, "y":4.5},
- {"label":"X", "x":3.25, "y":4.5},
- {"label":"C", "x":4.25, "y":4.5},
- {"label":"V", "x":5.25, "y":4.5},
- {"label":"B", "x":6.25, "y":4.5},
- {"label":"N", "x":7.25, "y":4.5},
- {"label":"M", "x":8.25, "y":4.5},
- {"label":"<", "x":9.25, "y":4.5},
- {"label":">", "x":10.25, "y":4.5},
- {"label":"?", "x":11.25, "y":4.5},
- {"label":"Shift", "x":12.25, "y":4.5, "w":2.75},
-
- {"label":"\u2191", "x":16.25, "y":4.5},
-
- {"label":"1", "x":18.5, "y":4.5},
- {"label":"2", "x":19.5, "y":4.5},
- {"label":"3", "x":20.5, "y":4.5},
- {"label":"Enter", "x":21.5, "y":4.5, "h":2},
-
- {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
- {"label":"Win", "x":1.25, "y":5.5, "w":1.25},
- {"label":"Alt", "x":2.5, "y":5.5, "w":1.25},
- {"x":3.75, "y":5.5, "w":6.25},
- {"label":"AltGr", "x":10, "y":5.5, "w":1.25},
- {"label":"Win", "x":11.25, "y":5.5, "w":1.25},
- {"label":"Menu", "x":12.5, "y":5.5, "w":1.25},
- {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25},
-
- {"label":"\u2190", "x":15.25, "y":5.5},
- {"label":"\u2193", "x":16.25, "y":5.5},
- {"label":"\u2192", "x":17.25, "y":5.5},
-
- {"label":"0", "x":18.5, "y":5.5, "w":2},
- {"label":".", "x":20.5, "y":5.5}
- ]
- },
- "LAYOUT_tkl_ansi": {
- "layout": [
- {"label":"Esc", "x":0, "y":0},
- {"label":"F1", "x":2, "y":0},
- {"label":"F2", "x":3, "y":0},
- {"label":"F3", "x":4, "y":0},
- {"label":"F4", "x":5, "y":0},
- {"label":"F5", "x":6.5, "y":0},
- {"label":"F6", "x":7.5, "y":0},
- {"label":"F7", "x":8.5, "y":0},
- {"label":"F8", "x":9.5, "y":0},
- {"label":"F9", "x":11, "y":0},
- {"label":"F10", "x":12, "y":0},
- {"label":"F11", "x":13, "y":0},
- {"label":"F12", "x":14, "y":0},
-
- {"label":"PrtSc", "x":15.25, "y":0},
- {"label":"Scroll Lock", "x":16.25, "y":0},
- {"label":"Pause", "x":17.25, "y":0},
-
- {"label":"~", "x":0, "y":1.5},
- {"label":"1", "x":1, "y":1.5},
- {"label":"2", "x":2, "y":1.5},
- {"label":"3", "x":3, "y":1.5},
- {"label":"4", "x":4, "y":1.5},
- {"label":"5", "x":5, "y":1.5},
- {"label":"6", "x":6, "y":1.5},
- {"label":"7", "x":7, "y":1.5},
- {"label":"8", "x":8, "y":1.5},
- {"label":"9", "x":9, "y":1.5},
- {"label":"0", "x":10, "y":1.5},
- {"label":"_", "x":11, "y":1.5},
- {"label":"+", "x":12, "y":1.5},
- {"label":"Backspace", "x":13, "y":1.5, "w":2},
-
- {"label":"Insert", "x":15.25, "y":1.5},
- {"label":"Home", "x":16.25, "y":1.5},
- {"label":"Page Up", "x":17.25, "y":1.5},
-
- {"label":"Tab", "x":0, "y":2.5, "w":1.5},
- {"label":"Q", "x":1.5, "y":2.5},
- {"label":"W", "x":2.5, "y":2.5},
- {"label":"E", "x":3.5, "y":2.5},
- {"label":"R", "x":4.5, "y":2.5},
- {"label":"T", "x":5.5, "y":2.5},
- {"label":"Y", "x":6.5, "y":2.5},
- {"label":"U", "x":7.5, "y":2.5},
- {"label":"I", "x":8.5, "y":2.5},
- {"label":"O", "x":9.5, "y":2.5},
- {"label":"P", "x":10.5, "y":2.5},
- {"label":"{", "x":11.5, "y":2.5},
- {"label":"}", "x":12.5, "y":2.5},
- {"label":"|", "x":13.5, "y":2.5, "w":1.5},
-
- {"label":"Delete", "x":15.25, "y":2.5},
- {"label":"End", "x":16.25, "y":2.5},
- {"label":"PgDn", "x":17.25, "y":2.5},
-
- {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
- {"label":"A", "x":1.75, "y":3.5},
- {"label":"S", "x":2.75, "y":3.5},
- {"label":"D", "x":3.75, "y":3.5},
- {"label":"F", "x":4.75, "y":3.5},
- {"label":"G", "x":5.75, "y":3.5},
- {"label":"H", "x":6.75, "y":3.5},
- {"label":"J", "x":7.75, "y":3.5},
- {"label":"K", "x":8.75, "y":3.5},
- {"label":"L", "x":9.75, "y":3.5},
- {"label":":", "x":10.75, "y":3.5},
- {"label":"\"", "x":11.75, "y":3.5},
- {"label":"Enter", "x":12.75, "y":3.5, "w":2.25},
-
- {"label":"Shift", "x":0, "y":4.5, "w":2.25},
- {"label":"Z", "x":2.25, "y":4.5},
- {"label":"X", "x":3.25, "y":4.5},
- {"label":"C", "x":4.25, "y":4.5},
- {"label":"V", "x":5.25, "y":4.5},
- {"label":"B", "x":6.25, "y":4.5},
- {"label":"N", "x":7.25, "y":4.5},
- {"label":"M", "x":8.25, "y":4.5},
- {"label":"<", "x":9.25, "y":4.5},
- {"label":">", "x":10.25, "y":4.5},
- {"label":"?", "x":11.25, "y":4.5},
- {"label":"Shift", "x":12.25, "y":4.5, "w":2.75},
-
- {"label":"\u2191", "x":16.25, "y":4.5},
-
- {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
- {"label":"Win", "x":1.25, "y":5.5, "w":1.25},
- {"label":"Alt", "x":2.5, "y":5.5, "w":1.25},
- {"x":3.75, "y":5.5, "w":6.25},
- {"label":"Alt", "x":10, "y":5.5, "w":1.25},
- {"label":"Win", "x":11.25, "y":5.5, "w":1.25},
- {"label":"Menu", "x":12.5, "y":5.5, "w":1.25},
- {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25},
-
- {"label":"\u2190", "x":15.25, "y":5.5},
- {"label":"\u2193", "x":16.25, "y":5.5},
- {"label":"\u2192", "x":17.25, "y":5.5}
- ]
- },
- "LAYOUT_tkl_iso": {
- "layout": [
- {"label":"Esc", "x":0, "y":0},
- {"label":"F1", "x":2, "y":0},
- {"label":"F2", "x":3, "y":0},
- {"label":"F3", "x":4, "y":0},
- {"label":"F4", "x":5, "y":0},
- {"label":"F5", "x":6.5, "y":0},
- {"label":"F6", "x":7.5, "y":0},
- {"label":"F7", "x":8.5, "y":0},
- {"label":"F8", "x":9.5, "y":0},
- {"label":"F9", "x":11, "y":0},
- {"label":"F10", "x":12, "y":0},
- {"label":"F11", "x":13, "y":0},
- {"label":"F12", "x":14, "y":0},
-
- {"label":"PrtSc", "x":15.25, "y":0},
- {"label":"Scroll Lock", "x":16.25, "y":0},
- {"label":"Pause", "x":17.25, "y":0},
-
- {"label":"\u00ac", "x":0, "y":1.5},
- {"label":"!", "x":1, "y":1.5},
- {"label":"\"", "x":2, "y":1.5},
- {"label":"\u00a3", "x":3, "y":1.5},
- {"label":"$", "x":4, "y":1.5},
- {"label":"%", "x":5, "y":1.5},
- {"label":"^", "x":6, "y":1.5},
- {"label":"&", "x":7, "y":1.5},
- {"label":"*", "x":8, "y":1.5},
- {"label":"(", "x":9, "y":1.5},
- {"label":")", "x":10, "y":1.5},
- {"label":"_", "x":11, "y":1.5},
- {"label":"+", "x":12, "y":1.5},
- {"label":"Backspace", "x":13, "y":1.5, "w":2},
-
- {"label":"Insert", "x":15.25, "y":1.5},
- {"label":"Home", "x":16.25, "y":1.5},
- {"label":"PgUp", "x":17.25, "y":1.5},
-
- {"label":"Tab", "x":0, "y":2.5, "w":1.5},
- {"label":"Q", "x":1.5, "y":2.5},
- {"label":"W", "x":2.5, "y":2.5},
- {"label":"E", "x":3.5, "y":2.5},
- {"label":"R", "x":4.5, "y":2.5},
- {"label":"T", "x":5.5, "y":2.5},
- {"label":"Y", "x":6.5, "y":2.5},
- {"label":"U", "x":7.5, "y":2.5},
- {"label":"I", "x":8.5, "y":2.5},
- {"label":"O", "x":9.5, "y":2.5},
- {"label":"P", "x":10.5, "y":2.5},
- {"label":"{", "x":11.5, "y":2.5},
- {"label":"}", "x":12.5, "y":2.5},
- {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2},
-
- {"label":"Delete", "x":15.25, "y":2.5},
- {"label":"End", "x":16.25, "y":2.5},
- {"label":"PgDn", "x":17.25, "y":2.5},
-
- {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
- {"label":"A", "x":1.75, "y":3.5},
- {"label":"S", "x":2.75, "y":3.5},
- {"label":"D", "x":3.75, "y":3.5},
- {"label":"F", "x":4.75, "y":3.5},
- {"label":"G", "x":5.75, "y":3.5},
- {"label":"H", "x":6.75, "y":3.5},
- {"label":"J", "x":7.75, "y":3.5},
- {"label":"K", "x":8.75, "y":3.5},
- {"label":"L", "x":9.75, "y":3.5},
- {"label":":", "x":10.75, "y":3.5},
- {"label":"@", "x":11.75, "y":3.5},
- {"label":"~", "x":12.75, "y":3.5},
-
- {"label":"Shift", "x":0, "y":4.5, "w":1.25},
- {"label":"|", "x":1.25, "y":4.5},
- {"label":"Z", "x":2.25, "y":4.5},
- {"label":"X", "x":3.25, "y":4.5},
- {"label":"C", "x":4.25, "y":4.5},
- {"label":"V", "x":5.25, "y":4.5},
- {"label":"B", "x":6.25, "y":4.5},
- {"label":"N", "x":7.25, "y":4.5},
- {"label":"M", "x":8.25, "y":4.5},
- {"label":"<", "x":9.25, "y":4.5},
- {"label":">", "x":10.25, "y":4.5},
- {"label":"?", "x":11.25, "y":4.5},
- {"label":"Shift", "x":12.25, "y":4.5, "w":2.75},
-
- {"label":"\u2191", "x":16.25, "y":4.5},
-
- {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
- {"label":"Win", "x":1.25, "y":5.5, "w":1.25},
- {"label":"Alt", "x":2.5, "y":5.5, "w":1.25},
- {"x":3.75, "y":5.5, "w":6.25},
- {"label":"AltGr", "x":10, "y":5.5, "w":1.25},
- {"label":"Win", "x":11.25, "y":5.5, "w":1.25},
- {"label":"Menu", "x":12.5, "y":5.5, "w":1.25},
- {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25},
-
- {"label":"\u2190", "x":15.25, "y":5.5},
- {"label":"\u2193", "x":16.25, "y":5.5},
- {"label":"\u2192", "x":17.25, "y":5.5}
- ]
- }
- }
-}
+++ /dev/null
-/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /*
- * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐
- * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Slk│Pse│
- * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘
- * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐
- * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp| |Ins|Hom|PgU| |Num| / | * | - |
- * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤
- * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │ |Del|End|PgD| │ 7 │ 8 │ 9 │ │
- * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ ├───┼───┼───┤ + │
- * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │ │ 4 │ 5 │ 6 │ │
- * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ ┌───┐ ├───┼───┼───┼───┤
- * │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ │ 1 │ 2 │ 3 │ │
- * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│
- * │Ctrl│GUI │Alt │ │ Alt│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ │ 0 │ . │ │
- * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘
- */
- LAYOUT_fullsize_ansi(
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
-
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT
- )
-};
+++ /dev/null
-# The default ANSI keymap for the Wasdat
+++ /dev/null
-/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /*
- * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐
- * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Slk│Pse│
- * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘
- * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐
- * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp| |Ins|Hom|PgU| |Num| / | * | - |
- * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤
- * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ │ |Del|End|PgD| │ 7 │ 8 │ 9 │ │
- * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ Ent│ └───┴───┴───┘ ├───┼───┼───┤ + │
- * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │ │ │ 4 │ 5 │ 6 │ │
- * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐ ├───┼───┼───┼───┤
- * │Shft│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ │ 1 │ 2 │ 3 │ │
- * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│
- * │Ctrl│GUI │Alt │ │AlGr│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ │ 0 │ . │ │
- * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘
- */
- LAYOUT_fullsize_iso(
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
-
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6,
- KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT
- )
-};
+++ /dev/null
-# The default ISO keymap for the Wasdat
+++ /dev/null
-#pragma once
-
-#define LAYER_FN
-#define LAYER_NUMPAD
+++ /dev/null
-#include QMK_KEYBOARD_H
-#include "konstantin.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Base layer
- * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐
- * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12││PSc│SLk│Pau│
- * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘
- * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐
- * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace ││Ins│Hom│PgU│
- * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤
- * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ ││Del│End│PgD│
- * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐Ent │└───┴───┴───┘
- * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ \ │ │
- * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐
- * │LSft│RAG│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ RShift │ │ ↑ │
- * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐
- * │LCtl│LGui│LAlt│ Space │RAlt│RGui│FnLk│RCtl││ ← │ ↓ │ → │
- * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘
- */
- [L_BASE] = LAYOUT_tkl_iso(
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN,
- FN_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
- KC_LSFT, RAL_RGU, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, FN_FNLK, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
- ),
-
- /* Function layer
- * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐
- * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ││ │Num│ │
- * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘
- * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐
- * │ │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ Clear ││ │ │ │
- * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤
- * │ M4 │M2 │M↑ │M1 │M3 │M5 │ │UCM│ │Stp│Ply│Prv│Nxt│ ││ │ │ │
- * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │└───┴───┴───┘
- * │ │M← │M↓ │M→ │MW↑│ │ │ │ │ │ │ │ │ │
- * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐
- * │ │ │MA0│MA2│MW←│MW→│ │ │App│Vo-│Vo+│Mut│ │ │PgU│
- * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐
- * │ │DtPR│DtNA│ MW↓ │ │ │ │ ││Hom│PgD│End│
- * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘
- */
- [L_FN] = LAYOUT_tkl_iso(
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD, _______,
- _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, CLEAR, _______, _______, _______,
- KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, _______, _______, _______,
- _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP, KC_VOLD, KC_VOLU, KC_MUTE, _______, KC_PGUP,
- _______, DST_P_R, DST_N_A, KC_WH_D, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END
- ),
-
- /* Numpad layer
- * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐
- * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ││ │Num│ │
- * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘
- * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐
- * │ │ │ │ │ │ │ │P7 │P8 │P9 │P- │ − │ = │ ││ │ │ │
- * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤
- * │ │ │ │ │ │ │ │P4 │P5 │P6 │P+ │ ( │ ) │ ││ │ │ │
- * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐PEnt│└───┴───┴───┘
- * │ │ │ │ │ │ │ │P1 │P2 │P3 │P* │ × │ │ │
- * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐
- * │ │ │ │ │ │ │ │P0 │P0 │ , │P. │P/ │ ÷ │ │ │
- * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐
- * │ │ │ │ │ │ │ │ ││ │ │ │
- * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘
- */
- [L_NUMPAD] = LAYOUT_tkl_iso(
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD, _______,
- _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, MINUS, EQUALS, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, L_PAREN, R_PAREN, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PAST, TIMES, _______, KC_PENT,
- _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_P0, COMMA, KC_PDOT, KC_PSLS, DIVIDE, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
- ),
-};
+++ /dev/null
-BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = no
-COMMAND_ENABLE = yes
-CONSOLE_ENABLE = yes
-EXTRAKEY_ENABLE = yes
-MOUSEKEY_ENABLE = yes
-NKRO_ENABLE = yes
-SPACE_CADET_ENABLE = no
-TAP_DANCE_ENABLE = yes
-UNICODEMAP_ENABLE = yes
+++ /dev/null
-/*
-Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#include <stdint.h>
-#include <stdbool.h>
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "debounce.h"
-#include "quantum.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header() print("\nr/c 01234567\n")
-# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop(matrix[i])
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop16(matrix[i])
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop32(matrix[i])
-# define ROW_SHIFTER ((uint32_t)1)
-#endif
-
-#ifdef MATRIX_MASKED
- extern const matrix_row_t matrix_mask[];
-#endif
-
-#ifdef DIRECT_PINS
-static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS;
-#elif (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
-static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-//static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t raw_matrix[MATRIX_ROWS]; //raw values
-static matrix_row_t matrix[MATRIX_ROWS]; //debounced values
-
-__attribute__ ((weak))
-void matrix_init_quantum(void) {
- matrix_init_kb();
-}
-
-__attribute__ ((weak))
-void matrix_scan_quantum(void) {
- matrix_scan_kb();
-}
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void) {
- return MATRIX_COLS;
-}
-
-//Deprecated.
-bool matrix_is_modified(void)
-{
- if (debounce_active()) return false;
- return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
- // switch blocker installed and the switch is always pressed.
-#ifdef MATRIX_MASKED
- return matrix[row] & matrix_mask[row];
-#else
- return matrix[row];
-#endif
-}
-
-void matrix_print(void)
-{
- print_matrix_header();
-
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- phex(row); print(": ");
- print_matrix_row(row);
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += matrix_bitpop(i);
- }
- return count;
-}
-
-
-#ifdef DIRECT_PINS
-
-static void init_pins(void) {
- for (int row = 0; row < MATRIX_ROWS; row++) {
- for (int col = 0; col < MATRIX_COLS; col++) {
- pin_t pin = direct_pins[row][col];
- if (pin != NO_PIN) {
- setPinInputHigh(pin);
- }
- }
- }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
- matrix_row_t last_row_value = current_matrix[current_row];
- current_matrix[current_row] = 0;
-
- for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
- pin_t pin = direct_pins[current_row][col_index];
- if (pin != NO_PIN) {
- current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index);
- }
- }
-
- return (last_row_value != current_matrix[current_row]);
-}
-
-#elif (DIODE_DIRECTION == COL2ROW)
-
-static void select_row(uint8_t row)
-{
- setPinOutput(row_pins[row]);
- writePinLow(row_pins[row]);
-}
-
-static void unselect_row(uint8_t row)
-{
- setPinInputHigh(row_pins[row]);
-}
-
-static void unselect_rows(void)
-{
- for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
- setPinInputHigh(row_pins[x]);
- }
-}
-
-static void init_pins(void) {
- unselect_rows();
- for (uint8_t x = 0; x < MATRIX_COLS; x++) {
- setPinInputHigh(col_pins[x]);
- }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
-{
- // Store last value of row prior to reading
- matrix_row_t last_row_value = current_matrix[current_row];
-
- // Clear data in matrix row
- current_matrix[current_row] = 0;
-
- // Select row and wait for row selecton to stabilize
- select_row(current_row);
- wait_us(30);
-
- // For each col...
- for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
-
- // Select the col pin to read (active low)
- uint8_t pin_state = readPin(col_pins[col_index]);
-
- // Populate the matrix row with the state of the col pin
- current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
- }
-
- // Unselect row
- unselect_row(current_row);
-
- return (last_row_value != current_matrix[current_row]);
-}
-
-#elif (DIODE_DIRECTION == ROW2COL)
-
-/* Cols 0 - 15
- * col 0: C7
- * col 1: B6
- * col 2: C6
- * col 3: B4
- * col 4: B5
- * col 5: D7
- * These columns use a 74HC237D 3 to 8 bit demultiplexer.
- * A0 A1 A2
- * col / pin: PD2 PD1 PD0
- * 6: 1 1 1
- * 7: 0 1 1
- * 8: 1 0 1
- * 9: 0 0 1
- * 10: 1 1 0
- * 11: 0 1 0
- * 12: 1 0 0
- * col 13: D3
- * col 14: B7
- * col 15: B3
- */
-static void select_col(uint8_t col)
-{
- switch (col) {
- case 0:
- writePinLow(C7);
- break;
- case 1:
- writePinLow(B6);
- break;
- case 2:
- writePinLow(C6);
- break;
- case 3:
- writePinLow(B4);
- break;
- case 4:
- writePinLow(B5);
- break;
- case 5:
- writePinLow(D7);
- break;
- case 6:
- writePinHigh(D0);
- writePinHigh(D1);
- writePinHigh(D2);
- break;
- case 7:
- writePinHigh(D0);
- writePinHigh(D1);
- break;
- case 8:
- writePinHigh(D0);
- writePinHigh(D2);
- break;
- case 9:
- writePinHigh(D0);
- break;
- case 10:
- writePinHigh(D1);
- writePinHigh(D2);
- break;
- case 11:
- writePinHigh(D1);
- break;
- case 12:
- writePinHigh(D2);
- break;
- case 13:
- writePinLow(D3);
- break;
- case 14:
- writePinLow(B7);
- break;
- case 15:
- writePinLow(B3);
- break;
- }
-}
-
-static void unselect_col(uint8_t col)
-{
- switch (col) {
- case 0:
- writePinHigh(C7);
- break;
- case 1:
- writePinHigh(B6);
- break;
- case 2:
- writePinHigh(C6);
- break;
- case 3:
- writePinHigh(B4);
- break;
- case 4:
- writePinHigh(B5);
- break;
- case 5:
- writePinHigh(D7);
- break;
- case 6:
- writePinLow(D0);
- writePinLow(D1);
- writePinLow(D2);
- break;
- case 7:
- writePinLow(D0);
- writePinLow(D1);
- break;
- case 8:
- writePinLow(D0);
- writePinLow(D2);
- break;
- case 9:
- writePinLow(D0);
- break;
- case 10:
- writePinLow(D1);
- writePinLow(D2);
- break;
- case 11:
- writePinLow(D1);
- break;
- case 12:
- writePinLow(D2);
- break;
- case 13:
- writePinHigh(D3);
- break;
- case 14:
- writePinHigh(B7);
- break;
- case 15:
- writePinHigh(B3);
- break;
- }
-}
-
-static void unselect_cols(void)
-{
- //Native
- setPinOutput(D3);
- setPinOutput(D7);
- writePinHigh(D3);
- writePinHigh(D7);
-
- setPinOutput(C6);
- setPinOutput(C7);
- writePinHigh(C6);
- writePinHigh(C7);
-
- setPinOutput(B3);
- setPinOutput(B4);
- setPinOutput(B5);
- setPinOutput(B6);
- setPinOutput(B7);
- writePinHigh(B3);
- writePinHigh(B4);
- writePinHigh(B5);
- writePinHigh(B6);
- writePinHigh(B7);
-
- //Demultiplexer
- setPinOutput(D0);
- setPinOutput(D1);
- setPinOutput(D2);
- writePinLow(D0);
- writePinLow(D1);
- writePinLow(D2);
-}
-
-static void init_pins(void) {
- unselect_cols();
- for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
- setPinInputHigh(row_pins[x]);
- }
-}
-
-static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
-{
- bool matrix_changed = false;
-
- // Select col and wait for col selecton to stabilize
- select_col(current_col);
- wait_us(30);
-
- // For each row...
- for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
- {
-
- // Store last value of row prior to reading
- matrix_row_t last_row_value = current_matrix[row_index];
-
- // Check row pin state
- if (readPin(row_pins[row_index]) == 0)
- {
- // Pin LO, set col bit
- current_matrix[row_index] |= (ROW_SHIFTER << current_col);
- }
- else
- {
- // Pin HI, clear col bit
- current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
- }
-
- // Determine if the matrix changed state
- if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
- {
- matrix_changed = true;
- }
- }
-
- // Unselect col
- unselect_col(current_col);
-
- return matrix_changed;
-}
-
-#endif
-
-void matrix_init(void) {
-
- // initialize key pins
- init_pins();
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- raw_matrix[i] = 0;
- matrix[i] = 0;
- }
-
- debounce_init(MATRIX_ROWS);
-
- matrix_init_quantum();
-}
-
-uint8_t matrix_scan(void)
-{
- bool changed = false;
-
-#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW)
- // Set row, read cols
- for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
- changed |= read_cols_on_row(raw_matrix, current_row);
- }
-#elif (DIODE_DIRECTION == ROW2COL)
- // Set col, read rows
- for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
- changed |= read_rows_on_col(raw_matrix, current_col);
- }
-#endif
-
- debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
-
- matrix_scan_quantum();
- return (uint8_t)changed;
-}
+++ /dev/null
-# Wasdat
-
-
-
-A drop-in replacement controller for the WASD v2 TKL and fullsize models.
-
-Keyboard Maintainer: [Maartenwut](https://github.com/Maartenwut)
-Hardware Supported: WASD v2 TKL/Fullsize ANSI & ISO with Wasdat controller
-Hardware Availability: [maartenwut.com](https://maartenwut.com/product/wasdat/)
-
-## Flashing
-
-The WASD has no reset button, but it does have a bank of DIP switches on the bottom, so to enter the bootloader on this board, simply toggle the first one on and off.
-
----
-
-Make example for this keyboard (after setting up your build environment):
-
- make wasdat:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+++ /dev/null
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Bootloader selection
-# Teensy halfkay
-# Pro Micro caterina
-# Atmel DFU atmel-dfu
-# LUFA DFU lufa-dfu
-# QMK DFU qmk-dfu
-# atmega32a bootloadHID
-BOOTLOADER = qmk-dfu
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes # USB Nkey Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
-MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no # Audio output on port C6
-FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
-
-CUSTOM_MATRIX = yes
-SRC += matrix.c
-LAYOUTS = fullsize_ansi fullsize_iso tkl_ansi tkl_iso
+++ /dev/null
-/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include "wasdat.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- matrix_init_user();
- led_init_ports();
-}
-
-void led_init_ports(void) {
- setPinOutput(B0);
- setPinOutput(B1);
- setPinOutput(B2);
-}
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
- if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
- writePinLow(B0);
- } else {
- writePinHigh(B0);
- }
-
- if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
- writePinLow(B1);
- } else {
- writePinHigh(B1);
- }
-
- if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
- writePinLow(B2);
- } else {
- writePinHigh(B2);
- }
-
- led_set_user(usb_led);
-}
+++ /dev/null
-/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "quantum.h"
-
-#define XXX KC_NO
-
-/* This a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT_fullsize_ansi( \
- K05, K44, K42, K32, K02, K21, K0A, K3E, K4E, K4D, K2D, K0D, K7D, K23, K53, K51, \
- K45, K25, K24, K22, K20, K40, K48, K28, K2A, K2E, K2F, K4F, K4A, K3D, K47, K4C, K46, K69, K67, K66, K76, \
- K35, K55, K54, K52, K50, K30, K38, K58, K5A, K5E, K5F, K3F, K3A, K1D, K49, K2C, K26, K59, K57, K56, K5C, \
- K34, K15, K14, K12, K10, K00, K08, K18, K1A, K1E, K1F, K0F, K6D, K39, K37, K36, \
- K3B, K65, K64, K62, K60, K70, K78, K68, K6A, K6E, K7F, K1B, K0C, K19, K17, K16, K1C, \
- K41, K31, K03, K09, K73, K11, K33, K61, K7C, K79, K77, K07, K06 \
-) \
-{ \
- { K00, XXX, K02, K03, XXX, K05, K06, K07, K08, K09, K0A, XXX, K0C, K0D, XXX, K0F }, \
- { K10, K11, K12, XXX, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
- { K20, K21, K22, K23, K24, K25, K26, XXX, K28, XXX, K2A, XXX, K2C, K2D, K2E, K2F }, \
- { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E, K3F }, \
- { K40, K41, K42, XXX, K44, K45, K46, K47, K48, K49, K4A, XXX, K4C, K4D, K4E, K4F }, \
- { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, XXX, K5C, XXX, K5E, K5F }, \
- { K60, K61, K62, XXX, K64, K65, K66, K67, K68, K69, K6A, XXX, XXX, K6D, K6E, XXX }, \
- { K70, XXX, XXX, K73, XXX, XXX, K76, K77, K78, K79, XXX, XXX, K7C, K7D, XXX, K7F } \
-}
-
-#define LAYOUT_fullsize_iso( \
- K05, K44, K42, K32, K02, K21, K0A, K3E, K4E, K4D, K2D, K0D, K7D, K23, K53, K51, \
- K45, K25, K24, K22, K20, K40, K48, K28, K2A, K2E, K2F, K4F, K4A, K3D, K47, K4C, K46, K69, K67, K66, K76, \
- K35, K55, K54, K52, K50, K30, K38, K58, K5A, K5E, K5F, K3F, K3A, K49, K2C, K26, K59, K57, K56, K5C, \
- K34, K15, K14, K12, K10, K00, K08, K18, K1A, K1E, K1F, K0F, K1D, K6D, K39, K37, K36, \
- K3B, K04, K65, K64, K62, K60, K70, K78, K68, K6A, K6E, K7F, K1B, K0C, K19, K17, K16, K1C, \
- K41, K31, K03, K09, K73, K11, K33, K61, K7C, K79, K77, K07, K06 \
-) \
-{ \
- { K00, XXX, K02, K03, K04, K05, K06, K07, K08, K09, K0A, XXX, K0C, K0D, XXX, K0F }, \
- { K10, K11, K12, XXX, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
- { K20, K21, K22, K23, K24, K25, K26, XXX, K28, XXX, K2A, XXX, K2C, K2D, K2E, K2F }, \
- { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E, K3F }, \
- { K40, K41, K42, XXX, K44, K45, K46, K47, K48, K49, K4A, XXX, K4C, K4D, K4E, K4F }, \
- { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, XXX, K5C, XXX, K5E, K5F }, \
- { K60, K61, K62, XXX, K64, K65, K66, K67, K68, K69, K6A, XXX, XXX, K6D, K6E, XXX }, \
- { K70, XXX, XXX, K73, XXX, XXX, K76, K77, K78, K79, XXX, XXX, K7C, K7D, XXX, K7F } \
-}
-
-#define LAYOUT_tkl_ansi( \
- K05, K44, K42, K32, K02, K21, K0A, K3E, K4E, K4D, K2D, K0D, K7D, K23, K53, K51, \
- K45, K25, K24, K22, K20, K40, K48, K28, K2A, K2E, K2F, K4F, K4A, K3D, K47, K4C, K46, \
- K35, K55, K54, K52, K50, K30, K38, K58, K5A, K5E, K5F, K3F, K3A, K1D, K49, K2C, K26, \
- K34, K15, K14, K12, K10, K00, K08, K18, K1A, K1E, K1F, K0F, K6D, \
- K3B, K65, K64, K62, K60, K70, K78, K68, K6A, K6E, K7F, K1B, K0C, \
- K41, K31, K03, K09, K73, K11, K33, K61, K7C, K79, K77 \
-) \
-{ \
- { K00, XXX, K02, K03, XXX, K05, XXX, XXX, K08, K09, K0A, XXX, K0C, K0D, XXX, K0F }, \
- { K10, K11, K12, XXX, K14, K15, XXX, XXX, K18, XXX, K1A, K1B, XXX, K1D, K1E, K1F }, \
- { K20, K21, K22, K23, K24, K25, K26, XXX, K28, XXX, K2A, XXX, K2C, K2D, K2E, K2F }, \
- { K30, K31, K32, K33, K34, K35, XXX, XXX, K38, XXX, K3A, K3B, XXX, K3D, K3E, K3F }, \
- { K40, K41, K42, XXX, K44, K45, K46, K47, K48, K49, K4A, XXX, K4C, K4D, K4E, K4F }, \
- { K50, K51, K52, K53, K54, K55, XXX, XXX, K58, XXX, K5A, XXX, XXX, XXX, K5E, K5F }, \
- { K60, K61, K62, XXX, K64, K65, XXX, XXX, K68, XXX, K6A, XXX, XXX, K6D, K6E, XXX }, \
- { K70, XXX, XXX, K73, XXX, XXX, XXX, K77, K78, K79, XXX, XXX, K7C, K7D, XXX, K7F } \
-}
-
-#define LAYOUT_tkl_iso( \
- K05, K44, K42, K32, K02, K21, K0A, K3E, K4E, K4D, K2D, K0D, K7D, K23, K53, K51, \
- K45, K25, K24, K22, K20, K40, K48, K28, K2A, K2E, K2F, K4F, K4A, K3D, K47, K4C, K46, \
- K35, K55, K54, K52, K50, K30, K38, K58, K5A, K5E, K5F, K3F, K3A, K49, K2C, K26, \
- K34, K15, K14, K12, K10, K00, K08, K18, K1A, K1E, K1F, K0F, K1D, K6D, \
- K3B, K04, K65, K64, K62, K60, K70, K78, K68, K6A, K6E, K7F, K1B, K0C, \
- K41, K31, K03, K09, K73, K11, K33, K61, K7C, K79, K77 \
-) \
-{ \
- { K00, XXX, K02, K03, K04, K05, XXX, XXX, K08, K09, K0A, XXX, K0C, K0D, XXX, K0F }, \
- { K10, K11, K12, XXX, K14, K15, XXX, XXX, K18, XXX, K1A, K1B, XXX, K1D, K1E, K1F }, \
- { K20, K21, K22, K23, K24, K25, K26, XXX, K28, XXX, K2A, XXX, K2C, K2D, K2E, K2F }, \
- { K30, K31, K32, K33, K34, K35, XXX, XXX, K38, XXX, K3A, K3B, XXX, K3D, K3E, K3F }, \
- { K40, K41, K42, XXX, K44, K45, K46, K47, K48, K49, K4A, XXX, K4C, K4D, K4E, K4F }, \
- { K50, K51, K52, K53, K54, K55, XXX, XXX, K58, XXX, K5A, XXX, XXX, XXX, K5E, K5F }, \
- { K60, K61, K62, XXX, K64, K65, XXX, XXX, K68, XXX, K6A, XXX, XXX, K6D, K6E, XXX }, \
- { K70, XXX, XXX, K73, XXX, XXX, XXX, K77, K78, K79, XXX, XXX, K7C, K7D, XXX, K7F } \
-}
projects / qmk_firmware.git / commitdiff