// See page comment above, control alternates CA matrix/CB matrix
// IC60 pcb uses only CA matrix.
// Each byte is a control pin for 8 leds ordered 8-1
-const uint8_t is31_ic60_leds_mask[0x12] = {
+const uint8_t all_on_leds_mask[0x12] = {
0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF,
0x00, 0xFF, 0x00, 0xFF, 0x00, 0x7F, 0x00, 0x00, 0x00
};
chRegSetThreadName("LEDthread");
uint8_t i, page;
+ uint8_t control_register_word[2] = {0};
+ uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes
//persistent status variables
- uint8_t backlight_status, lock_status, led_step_status, layer_status;
- uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes
+ uint8_t backlight_status, led_step_status, layer_status;
//mailbox variables
uint8_t temp, msg_type, msg_led;
// initialize persistent variables
backlight_status = 0;
-lock_status = 0;//TODO: does keyboard remember locks?
led_step_status = 4; //full brightness
layer_status = 0;
//TODO: lighting key led on keypress
break;
+ //turn on/off/toggle single led, msg_led = row/col of led
+ case OFF_LED:
+ xprintf("OFF_LED\n");
+ set_led_bit(7, control_register_word, msg_led, 0);
+ is31_write_data (7, control_register_word, 0x02);
+ if (layer_status > 0) {//check current led page to prevent double blink
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
+ }
+ layer_status = 7;
+ break;
+ case ON_LED:
+ xprintf("ON_LED\n");
+ set_led_bit(7, control_register_word, msg_led, 1);
+ is31_write_data (7, control_register_word, 0x02);
+ if (layer_status > 7) {
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
+ }
+ layer_status = 7;
+ break;
case TOGGLE_LED:
- //TODO: toggle existing indicator off, or let user do this, but write frame 7 for every led change
- //turn on single led, msg_led = row/col of led
xprintf("TOGGLE_LED\n");
- set_led_bit(led_control_reg, msg_led, 1);
+ set_led_bit(7, control_register_word, msg_led, 2);
- is31_write_data (7, led_control_reg, 0x12+1);
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
+ is31_write_data (7, control_register_word, 0x02);
+ if (layer_status > 7) {
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
+ }
layer_status = 7;
break;
case TOGGLE_ALL:
xprintf("TOGGLE_ALL\n");
//msg_led = unused, TODO: consider using msg_led to toggle layer display
- is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
- //if LED_ALL is on then toggle off, any other layer, turn on LED_ALL
- if(temp == 1) {
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
+ is31_read_register(0, 0x00, &temp);//if first byte is on, then toggle frame 1 off
+
+ led_control_reg[0] = 0;
+ if (temp==0) {
+ xprintf("all leds on");
+ __builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
} else {
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 1);
+ xprintf("all leds off");
+ __builtin_memset(led_control_reg+1, 0, 0x12);
}
- is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
+
+ is31_write_data(0, led_control_reg, 0x13);
+ if (layer_status > 0) {
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
+ }
+ layer_status=0;
+ //TODO: Double blink when all on
break;
case TOGGLE_BACKLIGHT:
//msg_led = unused
//TODO: consider Frame 0 as on/off layer and toggle led control register here
+ //TODO: need to test tracking of active layer with layer_state from qmk
xprintf("TOGGLE_BACKLIGHT\n");
backlight_status ^= 1;
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
case MODE_BREATH:
break;
case STEP_BRIGHTNESS:
+ //TEST: Step brightness code
//pwm_levels[] bounds checking, loop through array
//TODO: find a cleaner way to walk through this logic
if (msg_led == 0 && led_step_status == 0) {
}
-/* ========================
- * led bit processing
- * ======================== */
-void set_led_bit (uint8_t *led_control_reg, uint8_t msg_led, uint8_t toggle_on) {
- uint8_t row_byte, column_bit;
- //msg_led tens column is pin#
- //ones column is bit position in 8-bit mask
- //first byte is register address 0x00
- row_byte = ((msg_led / 10) % 10 - 1 ) * 2 + 1;// A register is every other 8 bits
- column_bit = 1<<(msg_led % 10 - 1);
-
- if (toggle_on) {
- led_control_reg[row_byte] |= 1<<(column_bit);
- } else {
- led_control_reg[row_byte] &= ~1<<(column_bit);
+/* ==============================
+ * led processing functions
+ * ============================== */
+
+void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action) {
+ //returns 2 bytes led control register address and byte mask to write
+
+ uint8_t control_reg_addr, column_bit, column_byte, temp;
+ //first byte is led control register address 0x00
+ //msg_led tens column is pin#, ones column is bit position in 8-bit mask
+ control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-register is every other byte
+ column_bit = 1<<(led_addr % 10 - 1);
+
+ is31_read_register(page,control_reg_addr,&temp);//need to maintain status of leds in this row (1 byte)
+ column_byte = temp;
+
+ switch(action) {
+ case 0:
+ column_byte &= ~1<<(column_bit);
+ break;
+ case 1:
+ column_byte |= 1<<(column_bit);
+ break;
+ case 2:
+ column_byte ^= 1<<(column_bit);
+ break;
}
+
+ led_control_reg[0] = control_reg_addr;
+ led_control_reg[1] = column_byte;
}
-//TODO: not toggling off correctly
-//TODO: confirm led_off page still has FF pwm for all
-void set_lock_leds(uint8_t lock_type, uint8_t lock_status) {
- uint8_t page;
- uint8_t led_addr, temp;
- uint8_t control_reg[2] = {0};//register address and led bits
+void set_lock_leds(uint8_t lock_type, uint8_t led_on) {
+ uint8_t page, led_addr;
+ uint8_t led_control_write[2] = {0};
+ //TODO: consolidate control register to top level array vs. three scattered around
switch(lock_type) {
case USB_LED_NUM_LOCK:
break;
#endif
}
- xprintf("led_addr: %X\n", led_addr);
- chThdSleepMilliseconds(30);
- control_reg[0] = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-register is every other byte
- xprintf("control_reg: %X\n", control_reg[0]);
- chThdSleepMilliseconds(30);
for(page=BACKLIGHT_OFF_LOCK_LED_OFF; page<8; page++) { //set in led_controller.h
- is31_read_register(page,control_reg[0],&temp);//need to maintain status of leds in this row (1 byte)
- chThdSleepMilliseconds(30);
- xprintf("1lock byte: %X\n", temp);
- chThdSleepMilliseconds(30);
- if (lock_status) {
- temp |= 1<<(led_addr % 10 - 1);
- } else {
- temp &= ~1<<(led_addr % 10 - 1);
- }
- chThdSleepMilliseconds(30);
- xprintf("2lock byte: %X\n", temp);
- chThdSleepMilliseconds(30);
- control_reg[1] = temp;
- is31_write_data (page, control_reg, 0x02);
+ //TODO: check if frame2 (or frame1, first byte all on), and ignore if true
+ //also if BACKLIGHT_OFF_LOCK_LED_OFF set
+ set_led_bit(page,led_control_write,led_addr,led_on);
+ is31_write_data (page, led_control_write, 0x02);
}
}
void write_led_page (uint8_t page, const uint8_t *led_array, uint8_t led_count) {
uint8_t i;
uint8_t row, col;
- uint8_t temp_control_reg[0x13] = {0};//led control register start address + 0x12 bytes
+ uint8_t led_control_register[0x13] = {0};//led control register start address + 0x12 bytes
for(i=0;i<led_count;i++){
row = ((led_array[i] / 10) % 10 - 1 ) * 2 + 1;//includes 1 byte shift for led register 0x00 address
col = led_array[i] % 10 - 1;
- temp_control_reg[row] |= 1<<(col);
+ led_control_register[row] |= 1<<(col);
}
- is31_write_data(page, temp_control_reg, 0x13);
+ is31_write_data(page, led_control_register, 0x13);
}
+
/* =====================
* hook into user keymap
* ===================== */
}
//set all led bits on for Frame 2 LEDS_ALL
+ //TODO: set all off in init
full_page[0] = 0;
- __builtin_memcpy(full_page+1, is31_ic60_leds_mask, 0x12);
+ __builtin_memset(full_page+1, 0, 0x12);
is31_write_data(1, full_page, 1+0x12);
/* enable breathing when the displayed page changes */
projects / qmk_firmware.git / commitdiff