--- /dev/null
+#include QMK_KEYBOARD_H
+#include "hvp.c"
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 3
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ LOWER,
+ RAISE,
+ ADJUST
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_QWERTY] = LAYOUT( \
+ //,-----------------------------------------. ,-----------------------------------------.
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_BSPC,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LT(_ADJUST, KC_ESC), KC_A, KC_S, KC_D, LT(_RAISE,KC_F), MT(MOD_LCTL,KC_G), KC_H, KC_J, KC_K, KC_L,TD(TD1),TD(TD2),\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM,KC_DOT,TD(TD3),KC_SFTENT,\
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC), LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+ //`--------------------' `--------------------'
+ ),
+
+ [_RAISE] = LAYOUT( \
+ //,-----------------------------------------. ,-----------------------------------------.
+ KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_BSPC,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT,KC_NO, KC_DEL,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_NO, KC_NO,\
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC), LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+ //`--------------------' `--------------------'
+ ),
+
+ [_LOWER] = LAYOUT( \
+ //,-----------------------------------------. ,-----------------------------------------.
+ KC_TAB,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MINS,KC_EQL,KC_LCBR,KC_RCBR,KC_PIPE,KC_GRV,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UNDS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS,KC_TILD,\
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC), LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+ //`--------------------' `--------------------'
+ ),
+
+ [_ADJUST] = LAYOUT( \
+ //,-----------------------------------------. ,-----------------------------------------.
+ KC_F1,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ RESET,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_MPLY, KC_MNXT, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,\
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC), LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+ //`--------------------' `--------------------'
+ )
+};
+
+int RGB_current_mode;
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+ if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+ layer_on(layer3);
+ } else {
+ layer_off(layer3);
+ }
+}
+
+void matrix_init_user(void) {
+ #ifdef RGBLIGHT_ENABLE
+ RGB_current_mode = rgblight_config.mode;
+ #endif
+ //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+ #ifdef SSD1306OLED
+ iota_gfx_init(!has_usb()); // turns on the display
+ #endif
+}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_layer_state(void);
+const char *read_logo(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+
+// const char *read_mode_icon(bool swap);
+// const char *read_host_led_state(void);
+// void set_timelog(void);
+// const char *read_timelog(void);
+
+void matrix_scan_user(void) {
+ iota_gfx_task();
+}
+
+void matrix_render_user(struct CharacterMatrix *matrix) {
+ if (is_master) {
+ // If you want to change the display of OLED, you need to change here
+ matrix_write_ln(matrix, read_layer_state());
+ matrix_write_ln(matrix, read_keylog());
+ //matrix_write_ln(matrix, read_keylogs());
+ //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
+ //matrix_write_ln(matrix, read_host_led_state());
+ //matrix_write_ln(matrix, read_timelog());
+ } else {
+ matrix_write(matrix, read_logo());
+ }
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+ if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+ memcpy(dest->display, source->display, sizeof(dest->display));
+ dest->dirty = true;
+ }
+}
+
+void iota_gfx_task_user(void) {
+ struct CharacterMatrix matrix;
+ matrix_clear(&matrix);
+ matrix_render_user(&matrix);
+ matrix_update(&display, &matrix);
+}
+#endif//SSD1306OLED
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ if (record->event.pressed) {
+#ifdef SSD1306OLED
+ set_keylog(keycode, record);
+#endif
+ // set_timelog();
+ }
+
+ switch (keycode) {
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ break;
+ }
+ return true;
+}
\ No newline at end of file
--- /dev/null
+#include "tap_dances.h"
+
+// Tap dance function for enable swedish characters on first layer. Unregister to not let tap bleed over to next keypress.
+// Tap dance 1
+void dance_1_finished(qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 2) {
+ tap_code(KC_SCLN);
+ } else {
+ register_code(KC_RALT);
+ register_code(KC_O);
+ unregister_code(KC_RALT);
+ unregister_code(KC_O);
+ }
+}
+
+void dance_1_reset(qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 2) {
+ unregister_code(KC_SCLN);
+ } else {
+ unregister_code(KC_RALT);
+ unregister_code(KC_O);
+ }
+}
+
+// Tap dance 2
+void dance_2_finished(qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 2) {
+ tap_code(KC_QUOT);
+ } else {
+ register_code(KC_RALT);
+ register_code(KC_A);
+ unregister_code(KC_RALT);
+ unregister_code(KC_A);
+ }
+}
+
+void dance_2_reset(qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 2) {
+ unregister_code(KC_QUOT);
+ } else {
+ unregister_code(KC_RALT);
+ unregister_code(KC_A);
+ }
+}
+
+// Tap dance 3
+void dance_3_finished(qk_tap_dance_state_t *state, void *user_data) {
+ // if (state->count == 2)
+ if (state->count == 2) {
+ tap_code(KC_SLSH);
+ } else {
+ register_code(KC_RALT);
+ register_code(KC_W);
+ unregister_code(KC_RALT);
+ unregister_code(KC_W);
+ }
+}
+
+void dance_3_reset(qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 2) {
+ unregister_code(KC_SLSH);
+ } else {
+ unregister_code(KC_RALT);
+ unregister_code(KC_W);
+ }
+}
+
+// Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+ // simple tap dance
+ [TD1] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, dance_1_finished, dance_1_reset),
+
+ [TD2] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, dance_2_finished, dance_2_reset),
+
+ [TD3] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, dance_3_finished, dance_3_reset)};
\ No newline at end of file
projects / qmk_firmware.git / commitdiff