* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
-#define CH_CFG_ST_FREQUENCY 100000
+#define CH_CFG_ST_FREQUENCY 1000
/**
* @brief Time delta constant for the tick-less mode.
* The value one is not valid, timeouts are rounded up to
* this value.
*/
-#define CH_CFG_ST_TIMEDELTA 2
+#define CH_CFG_ST_TIMEDELTA 0
/** @} */
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#undef MATRIX_ROW_PINS
+#undef MATRIX_COL_PINS
+
+#define MATRIX_ROW_PINS { C15, C14, A10, A9, A8 }
+#define MATRIX_COL_PINS { B8, B2, B10, A0, A1, A2, B0, A3, B1, A6, A7, B12, C13, B11, B9 }
+#define UNUSED_PINS
+
+#define NUMBER_OF_ENCODERS 1
+#define ENCODERS_PAD_A { B13 }
+#define ENCODERS_PAD_B { B14 }
+
+
//Audio
#undef AUDIO_VOICES
#undef C6_AUDIO
#define micro_oled_rotate_180
#endif
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 6
#define ZC_DET_TIME 0
#define AUTO_CAL_TIME 3
-//#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_ANIMATIONS
-//#define RGBLED_NUM 10
-//#define RGB_DI_PIN B5
-//#define DRIVER_LED_TOTAL RGBLED_NUM
+#define RGBLED_NUM 10
+#define RGB_DI_PIN B5
+#define DRIVER_LED_TOTAL RGBLED_NUM
-//#define RGB_MATRIX_KEYPRESSES
+// #define RGB_MATRIX_KEYPRESSES
#define SOLENOID_PIN A14
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
+#define HAL_USE_PWM TRUE
#endif
/**
/* Adjust (Lower + Raise)
* ,------+------+------+------+------+------------------------------------------------.
- * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - |
+ * | Reset|HPT TG|HPT FB|HPT M+|HPT M-|HPT RS| | | | | |EEP RS|
* |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del |
+ * | |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm| | | |AGswap|Qwerty|Colemk| | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | |Voice-|Voice+|Mus on|Musoff| | | | | | | | BL + |BL ST |BL TG |
+ * | |Voice-|Voice+|Mus on|Musoff| | | | | | |BL - | BL + |BL ST |BL TG |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | | | | | | | | | | | | | | | |
+ * | | | | | | | | | | | |CK RS |CK - |CK + |CK TG |
* `--------------------------------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT(
- RESET, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST , _______, _______, _______, _______, _______, _______, \
+ RESET, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST , _______, _______, _______, _______, _______, EEP_RST, \
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, _______, _______, _______, AG_SWAP, QWERTY, COLEMAK, _______, _______, _______, \
_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, \
/* Adjust (Lower + Raise)
* ,------+------+------+------+------+------------------------------------------------.
- * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - |
+ * | Reset|HPT TG|HPT FB|HPT M+|HPT M-|HPT RS| | | | | |EEP RS|
* |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del |
+ * | |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm| | | |AGswap|Qwerty|Colemk| | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | |Voice-|Voice+|Mus on|Musoff| | | | | | | | BL + |BL ST |BL TG |
+ * | |Voice-|Voice+|Mus on|Musoff| | | | | | |BL - | BL + |BL ST |BL TG |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | | | | | | | | | | | | | | | |
+ * | | | | | | | | | | | |CK RS |CK - |CK + |CK TG |
* `--------------------------------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT_wrapper(
- _______, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST, _______, _______, _______, _______, _______, _______, \
+ _______, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST, _______, _______, _______, _______, _______, EEP_RST, \
RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \
_______, MAGIC_TOGGLE_NKRO, _______, AU_ON, AU_OFF, AG_NORM, _______, _______, _______, AG_SWAP, QWERTY, COLEMAK, _______, _______, _______, \
_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, \
* **folder_name** description
-# List of Planck keymaps
+# List of Hadron keymaps
-* **default** default Planck layout
-* **cbbrowne** cbbrowne's Planck layout
\ No newline at end of file
+* **default** default Hadron layout
+* **ishtob** ishtob's Hadron layout
+* **sebaslayout** sebaslayout's Hadron layout
\ No newline at end of file
+++ /dev/null
-#include <string.h>
-#include "hal.h"
-#include "timer.h"
-#include "wait.h"
-#include "printf.h"
-#include "backlight.h"
-#include "matrix.h"
-#include "action.h"
-#include "keycode.h"
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_COLS];
-static bool debouncing = false;
-static uint16_t debouncing_time = 0;
-
-static uint8_t encoder_state = 0;
-static int8_t encoder_value = 0;
-static int8_t encoder_LUT[] = { 0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0 };
-
-__attribute__ ((weak))
-void matrix_init_user(void) {}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {}
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-void matrix_init(void) {
- printf("matrix init\n");
- //debug_matrix = true;
-
- // encoder setup
- palSetPadMode(GPIOB, 13, PAL_MODE_INPUT_PULLUP);
- palSetPadMode(GPIOB, 14, PAL_MODE_INPUT_PULLUP);
-
- encoder_state = (palReadPad(GPIOB, 13) << 0) | (palReadPad(GPIOB, 14) << 1);
-
- // actual matrix setup
- palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOA, 0, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOA, 1, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOA, 2, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOA, 3, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOA, 6, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOA, 7, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOC, 13, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 11, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 9, PAL_MODE_OUTPUT_PUSHPULL);
-
- palSetPadMode(GPIOC, 15, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOC, 14, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOA, 10, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOA, 9, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOA, 8, PAL_MODE_INPUT_PULLDOWN);
-
-
- memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
- memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t));
-
-
- matrix_init_quantum();
-}
-
-__attribute__ ((weak))
-void encoder_update(bool clockwise) { }
-
-#ifndef ENCODER_RESOLUTION
- #define ENCODER_RESOLUTION 4
-#endif
-
-uint8_t matrix_scan(void) {
- // encoder on B13 and B14
- encoder_state <<= 2;
- encoder_state |= (palReadPad(GPIOB, 13) << 0) | (palReadPad(GPIOB, 14) << 1);
- encoder_value += encoder_LUT[encoder_state & 0xF];
- if (encoder_value >= ENCODER_RESOLUTION) {
- encoder_update(0);
- }
- if (encoder_value <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise
- encoder_update(1);
- }
- encoder_value %= ENCODER_RESOLUTION;
-
- // actual matrix
- for (int col = 0; col < MATRIX_COLS; col++) {
- matrix_row_t data = 0;
-
- // strobe col { PB8, PB2, PB10, PA0, PA1, PA2, PB0, PA3, PB1, PA6, PA7, PB1, PA6, PA7, PB12, PC3, PB11, }
- switch (col) {
- case 0: palSetPad(GPIOB, 8); break;
- case 1: palSetPad(GPIOB, 2); break;
- case 2: palSetPad(GPIOB, 10); break;
- case 3: palSetPad(GPIOA, 0); break;
- case 4: palSetPad(GPIOA, 1); break;
- case 5: palSetPad(GPIOA, 2); break;
- case 6: palSetPad(GPIOB, 0); break;
- case 7: palSetPad(GPIOA, 3); break;
- case 8: palSetPad(GPIOB, 1); break;
- case 9: palSetPad(GPIOA, 6); break;
- case 10: palSetPad(GPIOA, 7); break;
- case 11: palSetPad(GPIOB, 12); break;
- case 12: palSetPad(GPIOC, 13); break;
- case 13: palSetPad(GPIOB, 11); break;
- case 14: palSetPad(GPIOB, 9); break;
- }
-
- // need wait to settle pin state
- wait_us(20);
-
- // read row data { PC15, PC14, PA10, PA9, PA8 }
- data = (
- (palReadPad(GPIOC, 15) << 0 ) |
- (palReadPad(GPIOC, 14) << 1 ) |
- (palReadPad(GPIOA, 10) << 2 ) |
- (palReadPad(GPIOA, 9) << 3 ) |
- (palReadPad(GPIOA, 8) << 4 )
- );
-
- // unstrobe col { PB8, PB2, PB10, PA0, PA1, PA2, PB0, PA3, PB1, PA6, PA7, PB1, PA6, PA7, PB12, PC3, PB11, }
- switch (col) {
- case 0: palClearPad(GPIOB, 8); break;
- case 1: palClearPad(GPIOB, 2); break;
- case 2: palClearPad(GPIOB, 10); break;
- case 3: palClearPad(GPIOA, 0); break;
- case 4: palClearPad(GPIOA, 1); break;
- case 5: palClearPad(GPIOA, 2); break;
- case 6: palClearPad(GPIOB, 0); break;
- case 7: palClearPad(GPIOA, 3); break;
- case 8: palClearPad(GPIOB, 1); break;
- case 9: palClearPad(GPIOA, 6); break;
- case 10: palClearPad(GPIOA, 7); break;
- case 11: palClearPad(GPIOB, 12); break;
- case 12: palClearPad(GPIOC, 13); break;
- case 13: palClearPad(GPIOB, 11); break;
- case 14: palClearPad(GPIOB, 9); break;
- }
-
- if (matrix_debouncing[col] != data) {
- matrix_debouncing[col] = data;
- debouncing = true;
- debouncing_time = timer_read();
- }
- }
-
- if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
- for (int row = 0; row < MATRIX_ROWS; row++) {
- matrix[row] = 0;
- for (int col = 0; col < MATRIX_COLS; col++) {
- matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col);
- }
- }
- debouncing = false;
- }
-
- matrix_scan_quantum();
-
- return 1;
-}
-
-bool matrix_is_on(uint8_t row, uint8_t col) {
- return (matrix[row] & (1<<col));
-}
-
-matrix_row_t matrix_get_row(uint8_t row) {
- return matrix[row];
-}
-
-void matrix_print(void) {
- printf("\nr/c 01234567\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- printf("%X0: ", row);
- matrix_row_t data = matrix_get_row(row);
- for (int col = 0; col < MATRIX_COLS; col++) {
- if (data & (1<<col))
- printf("1");
- else
- printf("0");
- }
- printf("\n");
- }
-}
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 8
-#define STM32_ST_USE_TIMER 2
+#define STM32_ST_USE_TIMER 3
/*
* UART driver system settings.
-# project specific files
-SRC = matrix.c
-
-## chip/board settings
-# - the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
+# projecct specific files
# Cortex version
-MCU = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+MCU = STM32F303
# Build Options
# comment out to disable the options.
#
BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
+COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
-CUSTOM_MATRIX = yes # Custom matrix file
+CUSTOM_MATRIX = no # Custom matrix file
AUDIO_ENABLE = yes
RGBLIGHT_ENABLE = no
+RGB_MATRIX_ENABLE = no #WS2812 once arm_rgb is implemented
HAPTIC_ENABLE += DRV2605L
QWIIC_ENABLE += MICRO_OLED
+ENCODER_ENABLER = yes
# SERIAL_LINK_ENABLE = yes
#include "ver3.h"
#include "qwiic.h"
#include "action_layer.h"
-#include "matrix.h"
#include "haptic.h"
+#ifdef RGB_MATRIX_ENABLE
+#include "rgblight.h"
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+ /*{row | col << 4}
+ | {x=0..224, y=0..64}
+ | | modifier
+ | | | */
+ {{1|(13<<4)}, {195, 3}, 0},
+ {{4|(13<<4)}, {195, 16}, 0},
+ {{4|(10<<4)}, {150, 16}, 0},
+ {{4|(7<<4)}, {105, 16}, 0},
+ {{4|(4<<4)}, {60, 16}, 0},
+ {{4|(1<<4)}, {15, 16}, 0},
+ {{1|(1<<4)}, {15, 3}, 0},
+ {{1|(4<<4)}, {60, 3}, 0},
+ {{1|(7<<4)}, {105, 3}, 0},
+ {{1|(10<<4)}, {150, 3}, 0}
+};
+
+#endif
+
+uint8_t *o_fb;
+
+uint16_t counterst = 0;
+
+
+
#ifdef QWIIC_MICRO_OLED_ENABLE
/* screen off after this many milliseconds */
send_command(DISPLAYON);
/* Layer indicator is 41 x 10 pixels */
-#define LAYER_INDICATOR_X 0
+#define LAYER_INDICATOR_X 5
#define LAYER_INDICATOR_Y 0
draw_string(LAYER_INDICATOR_X + 1, LAYER_INDICATOR_Y + 2, "LAYER", PIXEL_ON, NORM, 0);
draw_char(LAYER_INDICATOR_X + 34, LAYER_INDICATOR_Y + 2, layer + 0x30, PIXEL_ON, XOR, 0);
/* Matrix display is 19 x 9 pixels */
-#define MATRIX_DISPLAY_X 0
+#define MATRIX_DISPLAY_X 5
#define MATRIX_DISPLAY_Y 18
for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
send_command(DISPLAYOFF); /* 0xAE */
}
#endif
+ if (counterst == 0) {
+ //testPatternFB(o_fb);
+ }
+ counterst = (counterst + 1) % 1024;
+ //rgblight_task();
matrix_scan_user();
}
-/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+/* Copyright 2018 ishtob
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef VER3_H
-#define VER3_H
+#pragma once
-#include "hadron.h"
-
-#endif
\ No newline at end of file
+#include "hadron.h"
\ No newline at end of file
projects / qmk_firmware.git / commitdiff