#ifdef KEYBOARD_helix_rev2
#include "rev2.h"
#endif
+#ifdef KEYBOARD_helix_pico
+ #include "pico.h"
+#endif
#include "quantum.h"
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef PICO_CONFIG_H
+#define PICO_CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x3060
+#define DEVICE_VER 0x0002
+#define MANUFACTURER Yushakobo
+#define PRODUCT HelixPico
+#define DESCRIPTION A split keyboard for the cheap makers
+
+
+#define PREVENT_STUCK_MODIFIERS
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 100
+
+/* Use I2C or Serial */
+#define USE_I2C
+#define USE_SERIAL
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+// Helix keyboard OLED support
+// see ./rules.mk: OLED_ENABLE=yes or no
+#ifdef OLED_ENABLE
+ #define SSD1306OLED
+#endif
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+
+// wiring of each half
+#define MATRIX_COLS 7
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Audio */
+#ifdef AUDIO_ENABLE
+ #define B5_AUDIO
+#endif
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+//#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h
+#define ws2812_PORTREG PORTD
+#define ws2812_DDRREG DDRD
+
+// Helix keyboard RGB LED support
+//#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no
+// see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes
+#ifdef RGBLED_BACK
+ #define RGBLED_NUM 25
+#else
+ #define RGBLED_NUM 6
+#endif
+
+#ifndef IOS_DEVICE_ENABLE
+ #if RGBLED_NUM <= 6
+ #define RGBLIGHT_LIMIT_VAL 255
+ #else
+ #define RGBLIGHT_LIMIT_VAL 130
+ #endif
+ #define RGBLIGHT_VAL_STEP 17
+#else
+ #if RGBLED_NUM <= 6
+ #define RGBLIGHT_LIMIT_VAL 90
+ #else
+ #define RGBLIGHT_LIMIT_VAL 45
+ #endif
+ #define RGBLIGHT_VAL_STEP 4
+#endif
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+
+#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
+// USB_MAX_POWER_CONSUMPTION value for Helix keyboard
+// 120 RGBoff, OLEDoff
+// 120 OLED
+// 330 RGB 6
+// 300 RGB 32
+// 310 OLED & RGB 32
+ #define USB_MAX_POWER_CONSUMPTION 400
+#else
+ // fix iPhone and iPad power adapter issue
+ // iOS device need lessthan 100
+ #define USB_MAX_POWER_CONSUMPTION 100
+#endif
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+
+#endif
--- /dev/null
+{
+ "keyboard_name": "HelixPico",
+ "url": "https://github.com/MakotoKurauchi/helix",
+ "maintainer": "MakotoKurauchi",
+ "width": 15,
+ "height": 4,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 50,
+ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}]
+ }
+ }
+}
--- /dev/null
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+// place overrides here
+
+#ifdef AUDIO_ENABLE
+ #define STARTUP_SONG SONG(STARTUP_SOUND)
+ #define AUDIO_CLICKY
+#endif
+
+#endif /* CONFIG_USER_H */
--- /dev/null
+#include QMK_KEYBOARD_H
+#include "bootloader.h"
+#ifdef PROTOCOL_LUFA
+#include "lufa.h"
+#include "split_util.h"
+#endif
+#ifdef AUDIO_ENABLE
+ #include "audio.h"
+#endif
+#ifdef SSD1306OLED
+ #include "ssd1306.h"
+#endif
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_number {
+ _QWERTY = 0,
+ _COLEMAK,
+ _DVORAK,
+ _LOWER,
+ _RAISE,
+ _ADJUST
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ COLEMAK,
+ DVORAK,
+ LOWER,
+ RAISE,
+ ADJUST,
+ BACKLIT,
+ EISU,
+ KANA,
+ RGBRST
+};
+
+enum macro_keycodes {
+ KC_SAMPLEMACRO,
+};
+
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+//Macros
+#define M_SAMPLE M(KC_SAMPLEMACRO)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* Qwerty
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+
+[_QWERTY] = LAYOUT( \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
+ ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+ ),
+ /* Colemak
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Ctrl | A | R | S | T | D | | H | N | E | I | O | ' |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | | K | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+ [_COLEMAK] = LAYOUT( \
+ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \
+ KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
+ ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+ ),
+
+ /* Dvorak
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | Tab | ' | , | . | P | Y | | F | G | C | R | L | Bksp |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Ctrl | A | O | E | U | I | | D | H | T | N | S | / |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Shift| ; | Q | J | K | X | | B | M | W | V | Z |Enter |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+ [_DVORAK] = LAYOUT( \
+ KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \
+ KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
+ KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
+ ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+ ),
+
+ /* Lower
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | Del |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | | F12 | | PrSc | Home | End | |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * | | | | | | | | | | | Next | Vol- | Vol+ | Play |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+ [_LOWER] = LAYOUT( \
+ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, KC_HOME, KC_END, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+ ),
+
+ /* Raise
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | | F12 | | PrSc |PageDn|PageUp| |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * | | | | | | | | | | | Next | Vol- | Vol+ | Play |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+ [_RAISE] = LAYOUT( \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, KC_PGDN, KC_PGUP, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+ ),
+
+ /* Adjust (Lower + Raise)
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | | Reset| | | | | | | | | | | |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | |Aud on|Audoff|MU TOG|MU MOD| Mac | | Win |Qwerty|Colemk|Dvorak| | |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | |CK TOG|CK RST| CK UP|CK DWN| | | | |RGB ON| HUE+ | SAT+ | VAL+ |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * | | | | | | | | | | | MODE | HUE- | SAT- | VAL- |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+ [_ADJUST] = LAYOUT( \
+ _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, AU_ON, AU_OFF, MU_TOG, MU_MOD, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
+ _______, CK_TOGG, CK_RST, CK_UP, CK_DOWN, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SMOD,RGB_HUD, RGB_SAD, RGB_VAD \
+ )
+};
+
+
+
+#ifdef AUDIO_ENABLE
+
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float tone_dvorak[][2] = SONG(DVORAK_SOUND);
+float tone_colemak[][2] = SONG(COLEMAK_SOUND);
+float tone_plover[][2] = SONG(PLOVER_SOUND);
+float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND);
+float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
+#endif
+
+// define variables for reactive RGB
+bool TOG_STATUS = false;
+int RGB_current_mode;
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+ if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+ #ifdef RGBLIGHT_ENABLE
+ //rgblight_mode(RGB_current_mode);
+ #endif
+ layer_on(layer3);
+ } else {
+ layer_off(layer3);
+ }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_qwerty);
+ #endif
+ persistent_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case COLEMAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_colemak);
+ #endif
+ persistent_default_layer_set(1UL<<_COLEMAK);
+ }
+ return false;
+ break;
+ case DVORAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_dvorak);
+ #endif
+ persistent_default_layer_set(1UL<<_DVORAK);
+ }
+ return false;
+ break;
+ case LOWER:
+ if (record->event.pressed) {
+ //not sure how to have keyboard check mode and set it to a variable, so my work around
+ //uses another variable that would be set to true after the first time a reactive key is pressed.
+ if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+ } else {
+ TOG_STATUS = !TOG_STATUS;
+ #ifdef RGBLIGHT_ENABLE
+ //rgblight_mode(16);
+ #endif
+ }
+ layer_on(_LOWER);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ } else {
+ #ifdef RGBLIGHT_ENABLE
+ //rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change
+ #endif
+ TOG_STATUS = false;
+ layer_off(_LOWER);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ //not sure how to have keyboard check mode and set it to a variable, so my work around
+ //uses another variable that would be set to true after the first time a reactive key is pressed.
+ if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+ } else {
+ TOG_STATUS = !TOG_STATUS;
+ #ifdef RGBLIGHT_ENABLE
+ //rgblight_mode(15);
+ #endif
+ }
+ layer_on(_RAISE);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ } else {
+ #ifdef RGBLIGHT_ENABLE
+ //rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change
+ #endif
+ layer_off(_RAISE);
+ TOG_STATUS = false;
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ break;
+ //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
+ case RGB_MOD:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ rgblight_mode(RGB_current_mode);
+ rgblight_step();
+ RGB_current_mode = rgblight_config.mode;
+ }
+ #endif
+ return false;
+ break;
+ case EISU:
+ if (record->event.pressed) {
+ if(keymap_config.swap_lalt_lgui==false){
+ register_code(KC_LANG2);
+ }else{
+ SEND_STRING(SS_LALT("`"));
+ }
+ } else {
+ unregister_code(KC_LANG2);
+ }
+ return false;
+ break;
+ case KANA:
+ if (record->event.pressed) {
+ if(keymap_config.swap_lalt_lgui==false){
+ register_code(KC_LANG1);
+ }else{
+ SEND_STRING(SS_LALT("`"));
+ }
+ } else {
+ unregister_code(KC_LANG1);
+ }
+ return false;
+ break;
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_mode = rgblight_config.mode;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
+
+void matrix_init_user(void) {
+ #ifdef AUDIO_ENABLE
+ startup_user();
+ #endif
+ #ifdef RGBLIGHT_ENABLE
+ RGB_current_mode = rgblight_config.mode;
+ #endif
+ //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+ #ifdef SSD1306OLED
+ iota_gfx_init(!has_usb()); // turns on the display
+ #endif
+}
+
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+ _delay_ms(50); // gets rid of tick
+}
+
+void shutdown_user()
+{
+ _delay_ms(150);
+ stop_all_notes();
+}
+
+void music_on_user(void)
+{
+ music_scale_user();
+}
+
+void music_scale_user(void)
+{
+ PLAY_SONG(music_scale);
+}
+
+#endif
+
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+void matrix_scan_user(void) {
+ iota_gfx_task(); // this is what updates the display continuously
+}
+
+void matrix_update(struct CharacterMatrix *dest,
+ const struct CharacterMatrix *source) {
+ if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+ memcpy(dest->display, source->display, sizeof(dest->display));
+ dest->dirty = true;
+ }
+}
+
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER (1<<_LOWER)
+#define L_RAISE (1<<_RAISE)
+#define L_ADJUST (1<<_ADJUST)
+#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
+
+static void render_logo(struct CharacterMatrix *matrix) {
+
+ static char logo[]={
+ 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+ 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+ 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
+ 0};
+ matrix_write(matrix, logo);
+ //matrix_write_P(&matrix, PSTR(" Split keyboard kit"));
+}
+
+
+
+void render_status(struct CharacterMatrix *matrix) {
+
+ // Render to mode icon
+ static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
+ if(keymap_config.swap_lalt_lgui==false){
+ matrix_write(matrix, logo[0][0]);
+ matrix_write_P(matrix, PSTR("\n"));
+ matrix_write(matrix, logo[0][1]);
+ }else{
+ matrix_write(matrix, logo[1][0]);
+ matrix_write_P(matrix, PSTR("\n"));
+ matrix_write(matrix, logo[1][1]);
+ }
+
+ // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+ char buf[40];
+ snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+ matrix_write_P(matrix, PSTR("\nLayer: "));
+ switch (layer_state) {
+ case L_BASE:
+ matrix_write_P(matrix, PSTR("Default"));
+ break;
+ case L_RAISE:
+ matrix_write_P(matrix, PSTR("Raise"));
+ break;
+ case L_LOWER:
+ matrix_write_P(matrix, PSTR("Lower"));
+ break;
+ case L_ADJUST:
+ case L_ADJUST_TRI:
+ matrix_write_P(matrix, PSTR("Adjust"));
+ break;
+ default:
+ matrix_write(matrix, buf);
+ }
+
+ // Host Keyboard LED Status
+ char led[40];
+ snprintf(led, sizeof(led), "\n%s %s %s",
+ (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
+ (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
+ (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
+ matrix_write(matrix, led);
+}
+
+
+void iota_gfx_task_user(void) {
+ struct CharacterMatrix matrix;
+
+#if DEBUG_TO_SCREEN
+ if (debug_enable) {
+ return;
+ }
+#endif
+
+ matrix_clear(&matrix);
+ if(is_master){
+ render_status(&matrix);
+ }else{
+ render_logo(&matrix);
+ }
+ matrix_update(&display, &matrix);
+}
+
+#endif
--- /dev/null
+# The Default HelixPico Layout
+## Layout
+
+### Qwerty
+```
+ ,-----------------------------------------. ,-----------------------------------------.
+ | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter |
+ |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right |
+ `-------------------------------------------------------------------------------------------------'
+```
+
+### Colemak
+```
+ ,-----------------------------------------. ,-----------------------------------------.
+ | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | Ctrl | A | R | S | T | D | | H | N | E | I | O | ' |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | Shift| Z | X | C | V | B | | K | M | , | . | / |Enter |
+ |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right |
+ `-------------------------------------------------------------------------------------------------'
+```
+
+### Dvorak
+```
+ ,-----------------------------------------. ,-----------------------------------------.
+ | Tab | ' | , | . | P | Y | | F | G | C | R | L | Bksp |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | Ctrl | A | O | E | U | I | | D | H | T | N | S | / |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | Shift| ; | Q | J | K | X | | B | M | W | V | Z |Enter |
+ |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right |
+ `-------------------------------------------------------------------------------------------------'
+```
+
+## Layers
+
+|Priority|number|name|description|
+| ---- | ---- | --- | --- |
+|high|16|Adjust|Functions|
+||4|Raise|Numeric charactors|
+||3|Lower|Other charactors|
+||2|Dvorak|Dvorak leyout|
+||1|Colemak|Colemak leyout|
+|low|0|Qwerty|QWERTY leyout(base)|
+
+### Lower
+```
+ ,-----------------------------------------. ,-----------------------------------------.
+ | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | Del |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | | F7 | F8 | F9 | F10 | F11 | | F12 | | PrSc | Home | End | |
+ |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ | | | | | | | | | | | Next | Vol- | Vol+ | Play |
+ `-------------------------------------------------------------------------------------------------'
+```
+
+### Raise
+```
+ ,-----------------------------------------. ,-----------------------------------------.
+ | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | | F7 | F8 | F9 | F10 | F11 | | F12 | | PrSc |PageDn|PageUp| |
+ |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ | | | | | | | | | | | Next | Vol- | Vol+ | Play |
+ `-------------------------------------------------------------------------------------------------'
+```
+
+### Adjust (Lower + Raise)
+```
+ ,-----------------------------------------. ,-----------------------------------------.
+ | | Reset| | | | | | | | | | | |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | |Aud on|Audoff|MU TOG|MU MOD| Mac | | Win |Qwerty|Colemk|Dvorak| | |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | |CK TOG|CK RST| CK UP|CK DWN| | | | |RGB ON| HUE+ | SAT+ | VAL+ |
+ |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ | | | | | | | | | | | MODE | HUE- | SAT- | VAL- |
+ `-------------------------------------------------------------------------------------------------'
+```
+
+## Customize
+
+see `qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk`
+
+```
+# Helix keyboard customize
+# you can edit follows 6 Variables
+# jp: 以下の6つの変数を必要に応じて編集します。
+OLED_ENABLE = no # OLED_ENABLE
+LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
+LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
+LED_ANIMATIONS = yes # LED animations
+IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
+
+```
+## Compile
+
+go to qmk top directory.
+```
+$ cd qmk_firmware
+```
+
+build
+```
+$ make helix/pico:default
+```
+
+flash to keyboard
+```
+$ make helix/pico:default:avrdude
+```
+
+## Link
+* more detail wrote in Japanese [helix/Doc/firmware_jp.md](https://github.com/MakotoKurauchi/helix/blob/master/Doc/firmware_jp.md)
+* [Helix top](https://github.com/MakotoKurauchi/helix)
--- /dev/null
+# The Default HelixPico Layout
+## 配列
+
+### Qwerty配列
+
+```
+ ,-----------------------------------------. ,-----------------------------------------.
+ | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter |
+ |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right |
+ `-------------------------------------------------------------------------------------------------'
+```
+
+### Lower
+```
+ ,-----------------------------------------. ,-----------------------------------------.
+ | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | Del |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | | F7 | F8 | F9 | F10 | F11 | | F12 | | PrSc | Home | End | |
+ |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ | | | | | | | | | | | Next | Vol- | Vol+ | Play |
+ `-------------------------------------------------------------------------------------------------'
+```
+
+### Raise
+```
+ ,-----------------------------------------. ,-----------------------------------------.
+ | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | | F7 | F8 | F9 | F10 | F11 | | F12 | | PrSc |PageDn|PageUp| |
+ |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ | | | | | | | | | | | Next | Vol- | Vol+ | Play |
+ `-------------------------------------------------------------------------------------------------'
+```
+
+### Adjust (Lower + Raise)
+```
+ ,-----------------------------------------. ,-----------------------------------------.
+ | | Reset| | | | | | | | | | | |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | |Aud on|Audoff|MU TOG|MU MOD| Mac | | Win |Qwerty|Colemk|Dvorak| | |
+ |------+------+------+------+------+------| |------+------+------+------+------+------|
+ | |CK TOG|CK RST| CK UP|CK DWN| | | | |RGB ON| HUE+ | SAT+ | VAL+ |
+ |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ | | | | | | | | | | | MODE | HUE- | SAT- | VAL- |
+ `-------------------------------------------------------------------------------------------------'
+```
+
+他の配列(Colemak,Dvorak)は、[readme.md](readme.md) を参照
+
+## コンパイルの仕方
+
+コンパイルは、qmk_firmware のトップディレクトリで行います。
+
+```
+$ cd qmk_firmware
+```
+qmk_firmwareでは各キーボードのコンパイルは、`<キーボード名>:<キーマップ名>`という指定で行います。
+
+```
+$ make helix/pico:default
+```
+
+キーボードへの書き込みまで同時に行うには下記のように`:avrdude`を付けます。
+
+```
+$ make helix/pico:default:avrdude
+```
+
+コンパイル結果と中間生成物を消去したい場合は以下のようにします。
+
+```
+$ make helix/pico:default:clean
+```
+
+## カスタマイズ
+
+オプションの OLED をつけたり、
+RGB バックライトまたは、RGB Underglow をつけた場合は、
+`qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk` の以下の部分を編集して機能を有効化してください。
+
+```
+# Helix keyboard customize
+# you can edit follows 6 Variables
+# jp: 以下の6つの変数を必要に応じて編集します。
+OLED_ENABLE = no # OLED_ENABLE
+LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
+LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
+LED_ANIMATIONS = yes # LED animations
+IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
+
+```
+
+## RGB バックライトを有効にする
+
+rules.mk の下記の部分を編集して no を yes に変更してください。
+
+```
+LED_BACK_ENABLE = yes # LED backlight (Enable WS2812 RGB underlight.)
+```
+
+## RGB Underglow を有効にする
+
+rules.mk の下記の部分を編集して no を yes に変更してください。
+```
+LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.)
+```
+
+## OLEDを有効にする
+
+rules.mk の下記の部分を編集して no を yes に変更してください。
+```
+OLED_ENABLE = yes # OLED_ENABLE
+```
+
+## iPad/iPhoneサポートを有効にする。
+
+rules.mk の下記の部分を編集して no を yes に変更してください。
+RBG Underglow や RGBバックライトの輝度を抑えて、iPad, iPhone にも接続できるようになります。
+
+```
+IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
+```
+
+## リンク
+
+* さらに詳細は、[こちら helix/Doc/firmware_jp.md](https://github.com/MakotoKurauchi/helix/blob/master/Doc/firmware_jp.md)をご覧ください。
+* [Helix top](https://github.com/MakotoKurauchi/helix)
--- /dev/null
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = yes # Audio output on port B5
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SWAP_HANDS_ENABLE = no # Enable one-hand typing
+
+define HELIX_CUSTOMISE_MSG
+ $(info Helix customize)
+ $(info - OLED_ENABLE=$(OLED_ENABLE))
+ $(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE))
+ $(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE))
+ $(info - LED_ANIMATION=$(LED_ANIMATIONS))
+ $(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE))
+endef
+
+# Helix keyboard customize
+# you can edit follows 6 Variables
+# jp: 以下の6つの変数を必要に応じて編集します。
+OLED_ENABLE = no # OLED_ENABLE
+LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
+LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
+LED_ANIMATIONS = yes # LED animations
+IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
+
+#### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
+#### Do not enable these with audio at the same time.
+
+### Helix keyboard 'default' keymap: convenient command line option
+## make HELIX=<options> helix:defualt
+## option= oled | back | under | na | ios
+## ex.
+## make HELIX=oled helix:defualt
+## make HELIX=oled,back helix:defualt
+## make HELIX=oled,under helix:defualt
+## make HELIX=oled,back,na helix:defualt
+## make HELIX=oled,back,ios helix:defualt
+##
+ifneq ($(strip $(HELIX)),)
+ ifeq ($(findstring oled,$(HELIX)), oled)
+ OLED_ENABLE = yes
+ endif
+ ifeq ($(findstring back,$(HELIX)), back)
+ LED_BACK_ENABLE = yes
+ else ifeq ($(findstring under,$(HELIX)), under)
+ LED_UNDERGLOW_ENABLE = yes
+ endif
+ ifeq ($(findstring na,$(HELIX)), na)
+ LED_ANIMATIONS = no
+ endif
+ ifeq ($(findstring ios,$(HELIX)), ios)
+ IOS_DEVICE_ENABLE = yes
+ endif
+ $(eval $(call HELIX_CUSTOMISE_MSG))
+ $(info )
+endif
+
+# Uncomment these for checking
+# jp: コンパイル時にカスタマイズの状態を表示したい時はコメントをはずします。
+# $(eval $(call HELIX_CUSTOMISE_MSG))
+# $(info )
+
+ifeq ($(strip $(LED_BACK_ENABLE)), yes)
+ RGBLIGHT_ENABLE = yes
+ OPT_DEFS += -DRGBLED_BACK
+ ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
+ $(eval $(call HELIX_CUSTOMISE_MSG))
+ $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes')
+ endif
+else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
+ RGBLIGHT_ENABLE = yes
+else
+ RGBLIGHT_ENABLE = no
+endif
+
+ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
+ OPT_DEFS += -DIOS_DEVICE_ENABLE
+endif
+
+ifeq ($(strip $(LED_ANIMATIONS)), yes)
+ OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+endif
+
+ifeq ($(strip $(OLED_ENABLE)), yes)
+ OPT_DEFS += -DOLED_ENABLE
+endif
+
+ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
+ OPT_DEFS += -DLOCAL_GLCDFONT
+endif
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
+
+# Uncomment these for debugging
+# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
+# $(info -- OPT_DEFS=$(OPT_DEFS))
+# $(info )
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+
+#ifdef USE_MATRIX_I2C
+# include "i2c.h"
+#else // USE_SERIAL
+# include "serial.h"
+#endif
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 5
+#endif
+
+#define ERROR_DISCONNECT_COUNT 5
+
+static uint8_t debouncing = DEBOUNCE;
+static const int ROWS_PER_HAND = MATRIX_ROWS/2;
+static uint8_t error_count = 0;
+uint8_t is_master = 0 ;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+static uint8_t matrix_master_scan(void);
+
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ debug_enable = true;
+ debug_matrix = true;
+ debug_mouse = true;
+ // initialize row and col
+ unselect_rows();
+ init_cols();
+
+ TX_RX_LED_INIT;
+ TXLED0;
+ RXLED0;
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+
+ is_master = has_usb();
+
+ matrix_init_quantum();
+}
+
+uint8_t _matrix_scan(void)
+{
+ // Right hand is stored after the left in the matirx so, we need to offset it
+ int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+
+ for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+ select_row(i);
+ _delay_us(30); // without this wait read unstable value.
+ matrix_row_t cols = read_cols();
+ if (matrix_debouncing[i+offset] != cols) {
+ matrix_debouncing[i+offset] = cols;
+ debouncing = DEBOUNCE;
+ }
+ unselect_rows();
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ _delay_ms(1);
+ } else {
+ for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+ matrix[i+offset] = matrix_debouncing[i+offset];
+ }
+ }
+ }
+
+ return 1;
+}
+
+#ifdef USE_MATRIX_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+ int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+ int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+ if (err) goto i2c_error;
+
+ // start of matrix stored at 0x00
+ err = i2c_master_write(0x00);
+ if (err) goto i2c_error;
+
+ // Start read
+ err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+ if (err) goto i2c_error;
+
+ if (!err) {
+ int i;
+ for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+ matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
+ }
+ matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
+ i2c_master_stop();
+ } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+ i2c_reset_state();
+ return err;
+ }
+
+ return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+ int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+ int ret=serial_update_buffers();
+ if (ret ) {
+ if(ret==2)RXLED1;
+ return 1;
+ }
+ RXLED0;
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ matrix[slaveOffset+i] = serial_slave_buffer[i];
+ }
+ return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+ if (is_master) {
+ matrix_master_scan();
+ }else{
+ matrix_slave_scan();
+
+// if(serial_slave_DATA_CORRUPT()){
+// TXLED0;
+ int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
+
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ matrix[offset+i] = serial_master_buffer[i];
+ }
+
+// }else{
+// TXLED1;
+// }
+
+ matrix_scan_quantum();
+ }
+ return 1;
+}
+
+
+uint8_t matrix_master_scan(void) {
+
+ int ret = _matrix_scan();
+
+#ifndef KEYBOARD_helix_rev1
+ int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#ifdef USE_MATRIX_I2C
+// for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ /* i2c_slave_buffer[i] = matrix[offset+i]; */
+// i2c_slave_buffer[i] = matrix[offset+i];
+// }
+#else // USE_SERIAL
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ serial_master_buffer[i] = matrix[offset+i];
+ }
+#endif
+#endif
+
+#ifdef USE_MATRIX_I2C
+ if( i2c_transaction() ) {
+#else // USE_SERIAL
+ if( serial_transaction() ) {
+#endif
+ // turn on the indicator led when halves are disconnected
+ TXLED1;
+
+ error_count++;
+
+ if (error_count > ERROR_DISCONNECT_COUNT) {
+ // reset other half if disconnected
+ int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ matrix[slaveOffset+i] = 0;
+ }
+ }
+ } else {
+ // turn off the indicator led on no error
+ TXLED0;
+ error_count = 0;
+ }
+ matrix_scan_quantum();
+ return ret;
+}
+
+void matrix_slave_scan(void) {
+ _matrix_scan();
+
+ int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#ifdef USE_MATRIX_I2C
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ /* i2c_slave_buffer[i] = matrix[offset+i]; */
+ i2c_slave_buffer[i] = matrix[offset+i];
+ }
+#else // USE_SERIAL
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ serial_slave_buffer[i] = matrix[offset+i];
+ }
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing) return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop16(matrix[i]);
+ }
+ return count;
+}
+
+static void init_cols(void)
+{
+ for(int x = 0; x < MATRIX_COLS; x++) {
+ _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF);
+ _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
+ }
+}
+
+static matrix_row_t read_cols(void)
+{
+ matrix_row_t result = 0;
+ for(int x = 0; x < MATRIX_COLS; x++) {
+ result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
+ }
+ return result;
+}
+
+static void unselect_rows(void)
+{
+ for(int x = 0; x < ROWS_PER_HAND; x++) {
+ _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF);
+ _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
+ }
+}
+
+static void select_row(uint8_t row)
+{
+ _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF);
+ _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
+}
--- /dev/null
+#include "helix.h"
+
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+ //led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+
+ matrix_init_user();
+};
--- /dev/null
+#ifndef PICO_H
+#define PICO_CONFIG_H
+
+#include "../helix.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+#ifdef RGBLIGHT_ENABLE
+//rgb led driver
+#include "ws2812.h"
+#endif
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+
+#ifndef FLIP_HALF
+// Standard Keymap
+// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05, KC_NO }, \
+ { L10, L11, L12, L13, L14, L15, KC_NO }, \
+ { L20, L21, L22, L23, L24, L25, KC_NO }, \
+ { L30, L31, L32, L33, L34, L35, L36 }, \
+ { R05, R04, R03, R02, R01, R00, KC_NO }, \
+ { R15, R14, R13, R12, R11, R10, KC_NO }, \
+ { R25, R24, R23, R22, R21, R20, KC_NO }, \
+ { R35, R34, R33, R32, R31, R30, R36 }, \
+ }
+#else
+// Keymap with right side flipped
+// (TRRS jack on both halves are to the right)
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05, KC_NO }, \
+ { L10, L11, L12, L13, L14, L15, KC_NO }, \
+ { L20, L21, L22, L23, L24, L25, KC_NO }, \
+ { L30, L31, L32, L33, L34, L35, L36 }, \
+ { KC_NO, R00, R01, R02, R03, R04, R05 }, \
+ { KC_NO, R10, R11, R12, R13, R14, R15 }, \
+ { KC_NO, R20, R21, R22, R23, R24, R25 }, \
+ { R36, R30, R31, R32, R33, R34, R35 }, \
+ }
+#endif
+
+#endif
--- /dev/null
+SRC += pico/matrix.c \
+ pico/split_util.c \
+ ws2812.c
--- /dev/null
+#ifndef SOFT_SERIAL_CONFIG_H
+#define SOFT_SERIAL_CONFIG_H
+
+/* Soft Serial defines */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD2)
+#define SERIAL_PIN_INTERRUPT INT2_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
+
+//// #error rev2 serial config
+
+#endif /* SOFT_SERIAL_CONFIG_H */
--- /dev/null
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+
+#ifdef USE_MATRIX_I2C
+# include "i2c.h"
+#else
+# include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+ #ifdef EE_HANDS
+ isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+ #else
+ // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+ #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+ isLeftHand = !has_usb();
+ #else
+ isLeftHand = has_usb();
+ #endif
+ #endif
+}
+
+static void keyboard_master_setup(void) {
+
+#ifdef USE_MATRIX_I2C
+ i2c_master_init();
+#else
+ serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+
+#ifdef USE_MATRIX_I2C
+ i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+ serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+ USBCON |= (1 << OTGPADE); //enables VBUS pad
+ _delay_us(5);
+ return (USBSTA & (1<<VBUS)); //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+ setup_handedness();
+
+ if (has_usb()) {
+ keyboard_master_setup();
+ } else {
+ keyboard_slave_setup();
+ }
+ sei();
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+ split_keyboard_setup();
+}
--- /dev/null
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+#include "eeconfig.h"
+
+#define SLAVE_I2C_ADDRESS 0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+
+void matrix_master_OLED_init (void);
+
+#endif
projects / qmk_firmware.git / commitdiff