--- /dev/null
+/*\r
+Copyright 2012 Jun Wako <ukkeyboards@gmail.com>\r
+\r
+This program is free software: you can redistribute it and/or modify\r
+it under the terms of the GNU General Public License as published by\r
+the Free Software Foundation, either version 2 of the License, or\r
+(at your option) any later version.\r
+\r
+This program is distributed in the hope that it will be useful,\r
+but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
+GNU General Public License for more details.\r
+\r
+You should have received a copy of the GNU General Public License\r
+along with this program. If not, see <http://www.gnu.org/licenses/>.\r
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x554B /* Ascii */
+#define PRODUCT_ID 0x004E
+#define DEVICE_VER 0x0002
+#define MANUFACTURER UK Keyboards
+#define PRODUCT UK78
+#define DESCRIPTION QMK keyboard firmware for UK78
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 19
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F3, F2, F1, F0, A0 }
+#define MATRIX_COL_PINS { A2, A1, F5, F4, E6, E7, E5, E4, B7, D0, D1, D2, D3, D4, D5, D6, D7, B5, E0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+/* ws2812b options */
+#define RGB_DI_PIN F6
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "uk78.h"\r
+\r
+// Helpful defines\r
+#define _______ KC_TRNS\r
+\r
+// Each layer gets a name for readability, which is then used in the keymap matrix below.\r
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.\r
+// Layer names don't all need to be of the same length, obviously, and you can also skip them\r
+// entirely and just use numbers.\r
+#define _BL 0\r
+#define _FL1 1\r
+#define _FL2 2\r
+\r
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {\r
+ /* _BL: Base Layer(Default) - For ISO enter use ANSI \\r
+ * ,-------------------------------------------------------------------------------.\r
+ * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| /|BSpc| Del| P/| P*| P-|\r
+ * |-------------------------------------------------------------------------------|\r
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | P7| P8| P9| P=|\r
+ * |-------------------------------------------------------------------------------|\r
+ * |CAPS | A| S| D| F| G| H| J| K| L| ;| '| #| Ent| P4| P5| P6| P+|\r
+ * |-------------------------------------------------------------------------------|\r
+ * |Shift| \| Z| X| C| V| B| N| M| ,| .| /|Shift | Up| P1| P2| P3|SLck|\r
+ * |-------------------------------------------------------------------------------|\r
+ * |Ctrl|Win |Alt | Space |Alt|Mo(1)|Ctrl|Lef|Dow| Rig| P0| P.|PEnt|\r
+ * `-------------------------------------------------------------------------------'\r
+ */\r
+ [_BL] = KEYMAP(\r
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_DEL, KC_PSLS, KC_PAST, KC_PMNS,\r
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PEQL,\r
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,\r
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_SLCK,\r
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT),\r
+ /* _FL1: Function Layer 1 - For ISO enter use ANSI \\r
+ * ,-------------------------------------------------------------------------------.\r
+ * | `|F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|PScr|Ins|NLck| | | |\r
+ * |-------------------------------------------------------------------------------|\r
+ * | | | | |RST| | | | | | | | | | | | | |\r
+ * |-------------------------------------------------------------------------------|\r
+ * | | | | | | |Hu+|Va+|Sa+| | | | | | | | | |\r
+ * |-------------------------------------------------------------------------------|\r
+ * | | | | | |RGB|Hu-|Va-|Sa-|Bl-|Bl+| |Mute|Vol+| | | | |\r
+ * |-------------------------------------------------------------------------------|\r
+ * | | | | BL_Toggle | | | | |Vol-| | | | |\r
+ * `-------------------------------------------------------------------------------'\r
+ */\r
+ [_FL1] = KEYMAP(\r
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_INS, KC_NLCK, KC_TRNS, KC_TRNS, KC_TRNS,\r
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\r
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\r
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, BL_DEC, BL_INC, KC_TRNS, KC_MUTE, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\r
+ KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),\r
+ /* _FL2: Function Layer 2 - For ISO enter use ANSI \\r
+ * ,-------------------------------------------------------------------------------.\r
+ * | | | | | | | | | | | | | | | | | | | |\r
+ * |-------------------------------------------------------------------------------|\r
+ * | | | | | | | | | | | | | | | | | | |\r
+ * |-------------------------------------------------------------------------------|\r
+ * | | | | | | | | | | | | | | | | | | |\r
+ * |-------------------------------------------------------------------------------|\r
+ * | | | | | | | | | | | | | | | | | | |\r
+ * |-------------------------------------------------------------------------------|\r
+ * | | | | | | | | | | | | | |\r
+ * `-------------------------------------------------------------------------------'\r
+ */\r
+ [_FL2] = KEYMAP(\r
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \r
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \r
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \r
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \r
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),\r
+\r
+\r
+};\r
+\r
+\r
+void matrix_init_user(void) {\r
+}\r
+\r
+void matrix_scan_user(void) {\r
+}\r
+\r
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {\r
+ return true;\r
+}\r
+\r
+void led_set_user(uint8_t usb_led) {\r
+\r
+ if (usb_led & (1 << USB_LED_NUM_LOCK)) {\r
+ \r
+ } else {\r
+ \r
+ }\r
+\r
+ if (usb_led & (1 << USB_LED_CAPS_LOCK)) {\r
+ DDRA |= (1 << 3); PORTA |= (1 << 3);\r
+ } else {\r
+ DDRA &= ~(1 << 3); PORTA &= ~(1 << 3);\r
+ }\r
+\r
+ if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {\r
+ \r
+ } else {\r
+ \r
+ }\r
+\r
+ if (usb_led & (1 << USB_LED_COMPOSE)) {\r
+ \r
+ } else {\r
+ \r
+ }\r
+\r
+ if (usb_led & (1 << USB_LED_KANA)) {\r
+ \r
+ } else {\r
+ \r
+ }\r
+\r
+}
\ No newline at end of file
--- /dev/null
+# MCU name
+MCU = at90usb1286
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=8192
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no # Console for debug(+400)
+COMMAND_ENABLE ?= no # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= yes
\ No newline at end of file
--- /dev/null
+#ifndef UK78_H
+#define UK78_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, K116, K117, K118, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K215, K216, K217, K218, \
+ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, \
+ K400, K401, K402, K406, K410, K411, K412, K413, K414, K415, K416, K417, K418 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115, K116, K117, K118 }, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214, K215, K216, K217, K218 }, \
+ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318 }, \
+ { K400, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413, K414, K415, K416, K417, K418 } \
+}
+
+#endif
\ No newline at end of file