+#!@PYTHON@
+# vim: set noexpandtab:
+
+"""
+
+ TODO:
+ * junk --outdir for--output
+ * Figure out clean set of options.
+ *
+ * texinfo: add support for @pagesize
+
+ todo: dimension handling (all the x2y) is clumsy. (tca: Thats
+ because the values are taken directly from texinfo.tex,
+ geometry.sty and article.cls. Give me a hint, and I'll
+ fix it.)
+
+
+ TODO: magnification support should also work for texinfo -> html: eg. add as option to dvips.
+
+
+
+ This is a slightly hairy program. The general approach is as follows
+ The input string is chopped up in chunks, i.e. , a list of tuples
+
+ with the format (TAG_STR, MAIN_STR, OPTIONS, TODO, BASE)
+
+ This list is built step by step: first ignore and verbatim commands
+ are handled, delivering a list of chunks.
+
+ then all chunks containing lilypond commands are chopped up
+
+ when all chunks have their final form, all bodies from lilypond blocks are
+ extracted, and if applicable, written do disk and run through lilypond.
+
+
+tags supported
+
+ ignore
+ lilypond
+ input
+ verb
+ verbatim
+ multicols
+ numcols
+
+
+
+
+"""
+
+# This is was the idea for handling of comments:
+# Multiline comments, @ignore .. @end ignore is scanned for
+# in read_doc_file, and the chunks are marked as 'ignore', so
+# lilypond-book will not touch them any more. The content of the
+# chunks are written to the output file. Also 'include' and 'input'
+# regex has to check if they are commented out.
+#
+
+# Then it is scanned for 'lilypond', 'lilypond-file' and 'lilypond-block'.
+# These three regex's has to check if they are on a commented line,
+# % for latex, @c for texinfo.
+#
+# Then lines that are commented out with % (latex) and @c (Texinfo)
+# are put into chunks marked 'ignore'. This cannot be done before
+# searching for the lilypond-blocks because % is also the comment character
+# for lilypond.
+#
+# The the rest of the rexeces are searched for. They don't have to test
+# if they are on a commented out line.
+
+import glob
+import stat
+import string
+
+
+################################################################
+# Users of python modules should include this snippet
+# and customize variables below.
+
+# We'll suffer this path init stuff as long as we don't install our
+# python packages in <prefix>/lib/pythonx.y (and don't kludge around
+# it as we do with teTeX on Red Hat Linux: set some environment var
+# (PYTHONPATH) in profile)
+
+# If set, LILYPONDPREFIX must take prevalence
+# if datadir is not set, we're doing a build and LILYPONDPREFIX
+import getopt, os, sys
+datadir = '@local_lilypond_datadir@'
+if not os.path.isdir (datadir):
+ datadir = '@lilypond_datadir@'
+if os.environ.has_key ('LILYPONDPREFIX') :
+ datadir = os.environ['LILYPONDPREFIX']
+ while datadir[-1] == os.sep:
+ datadir= datadir[:-1]
+
+sys.path.insert (0, os.path.join (datadir, 'python'))
+
+# Customize these
+#if __name__ == '__main__':
+
+import lilylib as ly
+global _;_=ly._
+global re;re = ly.re
+
+# lilylib globals
+program_version = '@TOPLEVEL_VERSION@'
+program_name = 'lilypond-book'
+verbose_p = 0
+pseudo_filter_p = 0
+original_dir = os.getcwd ()
+
+
+preview_resolution = 90
+
+## FIXME
+## do -P or -p by default?
+##help_summary = _ ("Run LilyPond using LaTeX for titling")
+help_summary = _ ("Process LilyPond snippets in hybrid html, LaTeX or texinfo document")
+copyright = ('Tom Cato Amundsen <tca@gnu.org>',
+ 'Han-Wen Nienhuys <hanwen@cs.uu.nl>')
+
+option_definitions = [
+ (_ ("EXT"), 'f', 'format', _ ("use output format EXT (texi [default], texi-html, latex, html)")),
+ (_ ("DIM"), '', 'default-music-fontsize', _ ("default fontsize for music. DIM is assumed to be in points")),
+ (_ ("DIM"), '', 'default-lilypond-fontsize', _ ("deprecated, use --default-music-fontsize")),
+ (_ ("OPT"), '', 'extra-options', _ ("pass OPT quoted to the lilypond command line")),
+ (_ ("DIM"), '', 'force-music-fontsize', _ ("force fontsize for all inline lilypond. DIM is assumed to be in points")),
+ (_ ("DIM"), '', 'force-lilypond-fontsize', _ ("deprecated, use --force-music-fontsize")),
+ ('', 'h', 'help', _ ("print this help")),
+ (_ ("DIR"), 'I', 'include', _ ("include path")),
+ ('', 'M', 'dependencies', _ ("write dependencies")),
+ (_ ("PREF"), '', 'dep-prefix', _ ("prepend PREF before each -M dependency")),
+ ('', 'n', 'no-lily', _ ("don't run lilypond")),
+ ('', '', 'no-pictures', _ ("don't generate pictures")),
+ ('', '', 'no-music', _ ("strip all lilypond blocks from output")),
+ (_ ("FILE"), 'o', 'outname', _ ("filename main output file")),
+ (_ ("FILE"), '', 'outdir', _ ("where to place generated files")),
+ (_ ('RES'), '', 'preview-resolution',
+ _ ("set the resolution of the preview to RES")),
+ ('', 'V', 'verbose', _ ("be verbose")),
+ ('', 'v', 'version', _ ("print version information")),
+ ('', 'w', 'warranty', _ ("show warranty and copyright")),
+ ]
+
+# format specific strings, ie. regex-es for input, and % strings for output
+
+# global variables
+
+include_path = [os.getcwd ()]
+
+#lilypond_binary = 'valgrind --suppressions=/home/hanwen/usr/src/guile-1.6.supp --num-callers=10 /home/hanwen/usr/src/lilypond/lily/out/lilypond'
+
+lilypond_binary = os.path.join ('@bindir@', 'lilypond-bin')
+
+# only use installed binary when we're installed too.
+if '@bindir@' == ('@' + 'bindir@') or not os.path.exists (lilypond_binary):
+ lilypond_binary = 'lilypond-bin'
+
+
+
+ly2dvi_binary = os.path.join ('@bindir@', 'ly2dvi')
+
+# only use installed binary when we're installed too.
+if '@bindir@' == ('@' + 'bindir@') or not os.path.exists (lilypond_binary):
+ ly2dvi_binary = 'ly2dvi'
+
+
+
+g_extra_opts = ''
+g_here_dir = os.getcwd ()
+g_dep_prefix = ''
+g_outdir = ''
+g_force_music_fontsize = 0
+g_do_pictures = 1
+g_do_music = 1
+g_make_html = 0
+
+format = ''
+g_run_lilypond = 1
+no_match = 'a\ba'
+
+default_music_fontsize = 16
+default_text_fontsize = 12
+paperguru = None
+
+################################################################
+# Dimension handling for LaTeX.
+#
+class LatexPaper:
+ def __init__ (self):
+ self.m_document_preamble = []
+ self.m_num_cols = 1
+ self.m_multicols = 1
+
+ def find_latex_dims (self):
+ if g_outdir:
+ fname = os.path.join (g_outdir, "lily-tmp.tex")
+ else:
+ fname = "lily-tmp.tex"
+ try:
+ f = open (fname, "w")
+ except IOError:
+ error ("Error creating temporary file '%s'" % fname)
+
+ for s in self.m_document_preamble:
+ f.write (s)
+ f.write (r"""
+\begin{document}
+\typeout{---}
+\typeout{\columnsep \the\columnsep}
+\typeout{\textwidth \the\textwidth}
+\typeout{---}
+\end{document}
+ """)
+ f.close ()
+ re_dim = re.compile (r"\\(\w+)\s+(\d+\.\d+)")
+
+ cmd = "latex '\\nonstopmode \input %s'" % fname
+ # Ugh. (La)TeX writes progress and error messages on stdout
+ # Redirect to stderr
+ cmd = '(( %s >&2 ) >&- )' % cmd
+ status = ly.system (cmd, ignore_error = 1)
+ signal = 0xf & status
+ exit_status = status >> 8
+
+ if status:
+ ly.error (_ ("LaTeX failed."))
+ ly.error (_ ("The error log is as follows:"))
+
+ #URG see lilypond
+ try:
+ lns = open ('lily-tmp.log').readlines ()
+ except:
+ lns = ''
+ countdown = -3
+ for ln in lns:
+ sys.stderr.write (ln)
+ if re.match ('^!', ln):
+ countdown = 3
+
+ if countdown == 0:
+ break
+
+ if countdown > 0:
+ countdown = countdown -1
+
+ sys.stderr.write (" ... (further messages elided)...\n")
+ sys.exit (1)
+
+ lns = open ('lily-tmp.log').readlines ()
+ for ln in lns:
+ ln = string.strip (ln)
+ m = re_dim.match (ln)
+ if m:
+ if m.groups ()[0] in ('textwidth', 'columnsep'):
+ self.__dict__['m_%s' % m.groups ()[0]] = float (m.groups ()[1])
+
+ try:
+ os.remove (fname)
+ os.remove (os.path.splitext (fname)[0]+".aux")
+ os.remove (os.path.splitext (fname)[0]+".log")
+ except:
+ pass
+
+ if not self.__dict__.has_key ('m_textwidth'):
+ raise 'foo!'
+
+ def get_linewidth (self):
+ if self.m_num_cols == 1:
+ w = self.m_textwidth
+ else:
+ w = (self.m_textwidth - self.m_columnsep)/2
+ if self.m_multicols > 1:
+ return (w - self.m_columnsep* (self.m_multicols-1)) \
+ / self.m_multicols
+ return w
+
+
+class HtmlPaper:
+ def __init__ (self):
+ self.m_papersize = 'letterpaper'
+ self.m_fontsize = 12
+ def get_linewidth (self):
+ return html_linewidths[self.m_papersize][self.m_fontsize]
+
+class TexiPaper:
+ def __init__ (self):
+ self.m_papersize = 'letterpaper'
+ self.m_fontsize = 12
+ def get_linewidth (self):
+ return texi_linewidths[self.m_papersize][self.m_fontsize]
+
+def mm2pt (x):
+ return x * 2.8452756
+def in2pt (x):
+ return x * 72.26999
+def em2pt (x, fontsize = 10):
+ return {10: 10.00002, 11: 10.8448, 12: 11.74988}[fontsize] * x
+def ex2pt (x, fontsize = 10):
+ return {10: 4.30554, 11: 4.7146, 12: 5.16667}[fontsize] * x
+
+def pt2pt (x):
+ return x
+
+dimension_conversion_dict ={
+ 'mm': mm2pt,
+ 'cm': lambda x: mm2pt (10*x),
+ 'in': in2pt,
+ 'em': em2pt,
+ 'ex': ex2pt,
+ 'pt': pt2pt
+ }
+
+# Convert numeric values, with or without specific dimension, to floats.
+# Keep other strings
+def conv_dimen_to_float (value):
+ if type (value) == type (""):
+ m = re.match ("([0-9.]+)(cm|in|pt|mm|em|ex)",value)
+ if m:
+ unit = m.group (2)
+ num = string.atof (m.group (1))
+ conv = dimension_conversion_dict[m.group (2)]
+
+ value = conv (num)
+
+ elif re.match ("^[0-9.]+$",value):
+ value = float (value)
+
+ return value
+
+texi_linewidths = {
+ 'afourpaper': {12: mm2pt (160)},
+ 'afourwide': {12: in2pt (6.5)},
+ 'afourlatex': {12: mm2pt (150)},
+ 'smallbook': {12: in2pt (5)},
+ 'letterpaper': {12: in2pt (6)}}
+
+html_linewidths = {
+ 'afourpaper': {12: mm2pt (160)},
+ 'afourwide': {12: in2pt (6.5)},
+ 'afourlatex': {12: mm2pt (150)},
+ 'smallbook': {12: in2pt (5)},
+ 'letterpaper': {12: in2pt (6)}}
+
+
+################################################################
+# How to output various structures.
+output_dict= {
+
+
+ 'html' : {
+
+ 'output-filename' : r'''
+<!-- %s >
+<a href="%s">
+<pre>%s</pre></a>:''',
+ 'output-lilypond-fragment': '''<lilypond%s>
+\context Staff\context Voice{ %s }
+</lilypond>''',
+ 'output-noinline': r'''
+<!-- generated: %(fn)s.png !-->
+''',
+ ## maybe <hr> ?
+ 'pagebreak': None,
+ # Verbatim text is always finished with \n. FIXME: For HTML,
+ # this newline should be removed.
+ 'output-verbatim': r'''<pre>
+%s</pre>''',
+ # Verbatim text is always finished with \n. FIXME: For HTML,
+ # this newline should be removed.
+ 'output-small-verbatim': r'''<font size=-1><pre>
+%s</pre></font>''',
+ ## Ugh we need to differentiate on origin:
+ ## lilypond-block origin wants an extra <p>, but
+ ## inline music doesn't.
+ ## possibly other center options?
+ 'output-html': r'''
+%(htmlimages)s''',
+ },
+
+
+ 'latex': {
+
+ 'output-lilypond-fragment' : r'''\begin[singleline,%s]{lilypond}
+ \context Voice{
+ %s
+ }
+\end{lilypond}''',
+ 'output-filename' : r'''\verb+%s+:\\
+%% %s
+%% %s
+''',
+
+ # verbatim text is always finished with \n
+ 'output-verbatim': r'''\begin{verbatim}
+%s\end{verbatim}
+''',
+ # verbatim text is always finished with \n
+ 'output-small-verbatim': r'''{\small\begin{verbatim}
+%s\end{verbatim}}
+''',
+ 'output-default-post': "\\def\postLilyPondExample{}\n",
+ 'output-default-pre': "\\def\preLilyPondExample{}\n",
+ 'usepackage-graphics': '\\usepackage{graphics}\n',
+ 'output-eps': '\\noindent\includegraphics{%(fn)s}',
+ 'output-noinline': r'''
+%% generated: %(fn)s.eps
+''',
+ 'output-latex-quoted': r'''{\preLilyPondExample
+\def\lilypondbook{}
+\input %(fn)s.tex
+\postLilyPondExample}''',
+ 'output-latex-noquote': r'''{\parindent 0pt
+\preLilyPondExample
+\def\lilypondbook{}
+\input %(fn)s.tex
+\postLilyPondExample}''',
+ 'pagebreak': r'\pagebreak',
+ },
+
+
+ 'texi' : {
+
+
+ 'output-filename' : r'''
+@ifnothtml
+@file{%s}:@*
+@end ifnothtml
+@ifhtml
+@uref{%s,@file{%s}}
+@end ifhtml
+''',
+ 'output-lilypond-fragment': '''@lilypond[%s]
+\context Staff\context Voice{ %s }
+@end lilypond ''',
+ 'output-noinline': r'''
+@c generated: %(fn)s.png
+''',
+ 'pagebreak': None,
+ # verbatim text is always finished with \n
+ 'output-small-verbatim': r'''@smallexample
+%s@end smallexample
+''',
+ # verbatim text is always finished with \n
+ 'output-verbatim': r'''@example
+%s@end example
+''',
+ # do some tweaking: @ is needed in some ps stuff.
+ #
+ # ugh, the <p> below breaks inline images...
+ 'output-texi-noquote': r'''@tex
+\catcode`\@=12
+\parindent 0pt
+\def\lilypondbook{}
+\input %(fn)s.tex
+\catcode`\@=0
+@end tex
+@html
+<p>%(htmlimages)s
+<p>
+@end html
+''',
+ 'output-texi-quoted': r'''@quotation
+@tex
+\catcode`\@=12
+\def\lilypondbook{}
+\input %(fn)s.tex
+\catcode`\@=0
+@end tex
+@html
+<p>%(htmlimages)s
+<p>
+@end html
+@end quotation
+''',
+ }
+
+ }
+
+def output_verbatim (body, small):
+ global format
+ if format == 'html':
+ body = re.sub ('&', '&', body)
+ body = re.sub ('>', '>', body)
+ body = re.sub ('<', '<', body)
+ elif format == 'texi':
+ # clumsy workaround for python 2.2 pre bug.
+ body = re.sub ('@', '@@', body)
+ body = re.sub ('{', '@{', body)
+ body = re.sub ('}', '@}', body)
+
+ if small:
+ key = 'output-small-verbatim'
+ else:
+ key = 'output-verbatim'
+ return get_output (key) % body
+
+
+################################################################
+# Recognize special sequences in the input
+
+
+# Warning: This uses extended regular expressions. Tread with care.
+#
+# legenda
+#
+# (?P<name>regex) -- assign result of REGEX to NAME
+# *? -- match non-greedily.
+# (?m) -- multiline regex: make ^ and $ match at each line
+# (?s) -- make the dot match all characters including newline
+re_dict = {
+ 'html': {
+ 'include': no_match,
+ 'input': no_match,
+ 'header': no_match,
+ 'preamble-end': no_match,
+ 'landscape': no_match,
+ 'verbatim': r'''(?s)(?P<code><pre>\s.*?</pre>\s)''',
+ 'verb': r'''(?P<code><pre>.*?</pre>)''',
+ 'lilypond-file': r'(?m)(?P<match><lilypondfile(?P<options>[^>]+)?>\s*(?P<filename>[^<]+)\s*</lilypondfile>)',
+ 'lilypond' : '(?m)(?P<match><lilypond((?P<options>[^:]*):)(?P<code>.*?)/>)',
+ 'lilypond-block': r'''(?ms)(?P<match><lilypond(?P<options>[^>]+)?>(?P<code>.*?)</lilypond>)''',
+ 'option-sep' : '\s*',
+ 'intertext': r',?\s*intertext=\".*?\"',
+ 'multiline-comment': r"(?sm)\s*(?!@c\s+)(?P<code><!--\s.*?!-->)\s",
+ 'singleline-comment': no_match,
+ 'numcols': no_match,
+ 'multicols': no_match,
+ 'ly2dvi': r'(?m)(?P<match><ly2dvifile(?P<options>[^>]+)?>\s*(?P<filename>[^<]+)\s*</ly2dvifile>)',
+ },
+
+ 'latex': {
+ 'input': r'(?m)^[^%\n]*?(?P<match>\\mbinput{?([^}\t \n}]*))',
+ 'include': r'(?m)^[^%\n]*?(?P<match>\\mbinclude{(?P<filename>[^}]+)})',
+ 'option-sep' : ',\s*',
+ 'header': r"\n*\\documentclass\s*(\[.*?\])?",
+ 'preamble-end': r'(?P<code>\\begin\s*{document})',
+ 'verbatim': r"(?s)(?P<code>\\begin\s*{verbatim}.*?\\end{verbatim})",
+ 'verb': r"(?P<code>\\verb(?P<del>.).*?(?P=del))",
+ 'lilypond-file': r'(?m)^[^%\n]*?(?P<match>\\lilypondfile\s*(\[(?P<options>.*?)\])?\s*\{(?P<filename>.+)})',
+ 'lilypond' : r'(?m)^[^%\n]*?(?P<match>\\lilypond\s*(\[(?P<options>.*?)\])?\s*{(?P<code>.*?)})',
+ 'lilypond-block': r"(?sm)^[^%\n]*?(?P<match>\\begin\s*(\[(?P<options>.*?)\])?\s*{lilypond}(?P<code>.*?)\\end{lilypond})",
+ 'def-post-re': r"\\def\\postLilyPondExample",
+ 'def-pre-re': r"\\def\\preLilyPondExample",
+ 'usepackage-graphics': r"\usepackage\s*{graphics}",
+ 'intertext': r',?\s*intertext=\".*?\"',
+ 'multiline-comment': no_match,
+ 'singleline-comment': r"(?m)^.*?(?P<match>(?P<code>^%.*$\n+))",
+ 'numcols': r"(?P<code>\\(?P<num>one|two)column)",
+ 'multicols': r"(?P<code>\\(?P<be>begin|end)\s*{multicols}({(?P<num>\d+)?})?)",
+ 'ly2dvi': no_match,
+
+ },
+
+ # why do we have distinction between @mbinclude and @include?
+
+ 'texi': {
+ 'include': '(?m)^[^%\n]*?(?P<match>@mbinclude\s+(?P<filename>\S*))',
+ 'input': no_match,
+ 'header': no_match,
+ 'preamble-end': no_match,
+ 'landscape': no_match,
+ 'verbatim': r'''(?s)(?P<code>@example\s.*?@end example\s)''',
+ 'verb': r'''(?P<code>@code{.*?})''',
+ 'lilypond-file': '(?m)^(?P<match>@lilypondfile(\[(?P<options>[^]]*)\])?{(?P<filename>[^}]+)})',
+ 'lilypond' : '(?m)^(?P<match>@lilypond(\[(?P<options>[^]]*)\])?{(?P<code>.*?)})',
+ 'lilypond-block': r'''(?ms)^(?P<match>@lilypond(\[(?P<options>[^]]*)\])?\s(?P<code>.*?)@end lilypond)\s''',
+ 'option-sep' : ',\s*',
+ 'intertext': r',?\s*intertext=\".*?\"',
+ 'multiline-comment': r"(?sm)^\s*(?!@c\s+)(?P<code>@ignore\s.*?@end ignore)\s",
+ 'singleline-comment': r"(?m)^.*?(?P<match>(?P<code>@c.*$\n+))",
+ 'numcols': no_match,
+ 'multicols': no_match,
+ 'ly2dvi': no_match,
+ }
+ }
+
+
+for r in re_dict.keys ():
+ olddict = re_dict[r]
+ newdict = {}
+ for k in olddict.keys ():
+ try:
+ newdict[k] = re.compile (olddict[k])
+ except:
+ print 'invalid regexp: %s' % olddict[k]
+
+ ## we'd like to catch and reraise a more
+ ## detailed error, but alas, the exceptions
+ ## changed across the 1.5/2.1 boundary.
+
+ raise "Invalid re"
+ re_dict[r] = newdict
+
+
+def uniq (list):
+ list.sort ()
+ s = list
+ list = []
+ for x in s:
+ if x not in list:
+ list.append (x)
+ return list
+
+
+def get_output (name):
+ return output_dict[format][name]
+
+def get_re (name):
+ return re_dict[format][name]
+
+def bounding_box_dimensions (fname):
+ if g_outdir:
+ fname = os.path.join (g_outdir, fname)
+ try:
+ fd = open (fname)
+ except IOError:
+ error ("Error opening `%s'" % fname)
+ str = fd.read ()
+ s = re.search ('%%BoundingBox: ([0-9]+) ([0-9]+) ([0-9]+) ([0-9]+)', str)
+ if s:
+
+ gs = map (lambda x: string.atoi (x), s.groups ())
+ return (int (gs[2] - gs[0] + 0.5),
+ int (gs[3] - gs[1] + 0.5))
+ else:
+ return (0,0)
+
+def error (str):
+ sys.stderr.write ("\n\n" + str + "\nExiting ... \n\n")
+ raise 'Exiting.'
+
+
+def compose_full_body (body, opts):
+ '''Construct the lilypond code to send to LilyPond.
+ Add stuff to BODY using OPTS as options.'''
+ music_size = default_music_fontsize
+ if g_force_music_fontsize:
+ music_size = g_force_music_fontsize
+ indent = ''
+ linewidth = ''
+ notime = ''
+ for o in opts:
+ if not g_force_music_fontsize:
+ m = re.match ('([0-9]+)pt', o)
+ if m:
+ music_size = string.atoi (m.group (1))
+
+ m = re.match ('indent=([-.0-9]+)(cm|in|mm|pt)', o)
+ if m:
+ f = float (m.group (1))
+ indent = 'indent = %f\\%s' % (f, m.group (2))
+
+ m = re.match ('linewidth=([-.0-9]+)(cm|in|mm|pt)', o)
+ if m:
+ f = float (m.group (1))
+ linewidth = 'linewidth = %f\\%s' % (f, m.group (2))
+
+ if re.search ('\\\\score', body):
+ is_fragment = 0
+ else:
+ is_fragment = 1
+ if 'fragment' in opts:
+ is_fragment = 1
+ if 'nofragment' in opts:
+ is_fragment = 0
+
+ if is_fragment and not 'multiline' in opts:
+ opts.append ('singleline')
+
+ if 'raggedright' in opts or 'singleline' in opts:
+ if not linewidth:
+ linewidth = 'raggedright = ##t'
+ if not indent:
+ indent = 'indent = 0.0\mm'
+ elif not linewidth:
+ global paperguru
+ l = paperguru.get_linewidth ()
+ linewidth = 'linewidth = %f\pt' % l
+
+ if 'noindent' in opts:
+ indent = 'indent = 0.0\mm'
+
+ if 'notime' in opts:
+ notime = r'''
+\translator {
+ \StaffContext
+ \remove Time_signature_engraver
+}
+'''
+
+ orig_name = ''
+ for o in opts:
+ m= re.search ('relative(.*)', o)
+ v = 0
+ if m:
+ try:
+ v = string.atoi (m.group (1))
+ except ValueError:
+ pass
+
+ v = v + 1
+ pitch = 'c'
+ if v < 0:
+ pitch = pitch + '\,' * v
+ elif v > 0:
+ pitch = pitch + '\'' * v
+
+ body = '\\relative %s { %s }' % (pitch, body)
+ m =re.search ("filename=(.*)", o)
+ if m:
+ orig_name = m.group (1)
+
+ if is_fragment:
+ body = r'''
+\score {
+ \notes {
+%s
+ }
+}
+''' % body
+
+ opts = uniq (opts)
+ optstring = string.join (opts, ' ')
+ optstring = re.sub ('\n', ' ', optstring)
+ body = r'''
+%% Generated automatically by: lilypond-book.py
+%% options are %s
+#(set-global-staff-size %d)
+
+\paper {
+ %s
+ %s
+ %s
+}
+''' % (optstring, music_size, linewidth, indent, notime) + body
+
+ if orig_name:
+ body = '\\renameinput \"%s\"\n%s' % (orig_name, body)
+
+
+ # ughUGH not original options
+ return body
+
+def scan_html_preamble (chunks):
+ return
+
+def scan_latex_preamble (chunks):
+ # First we want to scan the \documentclass line
+ # it should be the first non-comment line.
+ # The only thing we really need to know about the \documentclass line
+ # is if there are one or two columns to begin with.
+ idx = 0
+ while 1:
+ if chunks[idx][0] == 'ignore':
+ idx = idx + 1
+ continue
+ m = get_re ('header').match (chunks[idx][1])
+ if not m:
+ error ("Latex documents must start with a \documentclass command")
+ if m.group (1):
+ options = re.split (r',\s*', m.group (1)[1:-1])
+ else:
+ options = []
+ if 'twocolumn' in options:
+ paperguru.m_num_cols = 2
+ break
+
+
+ # Then we add everything before \begin{document} to
+ # paperguru.m_document_preamble so that we can later write this header
+ # to a temporary file in find_latex_dims() to find textwidth.
+ while idx < len (chunks) and chunks[idx][0] != 'preamble-end':
+ if chunks[idx] == 'ignore':
+ idx = idx + 1
+ continue
+ paperguru.m_document_preamble.append (chunks[idx][1])
+ idx = idx + 1
+
+ if len (chunks) == idx:
+ error ("Didn't find end of preamble (\\begin{document})")
+
+ paperguru.find_latex_dims ()
+
+def scan_texi_preamble (chunks):
+ # this is not bulletproof..., it checks the first 10 chunks
+ for c in chunks[:10]:
+ if c[0] == 'input':
+ for s in ('afourpaper', 'afourwide', 'letterpaper',
+ 'afourlatex', 'smallbook'):
+ if string.find (c[1], "@%s" % s) != -1:
+ paperguru.m_papersize = s
+
+
+def scan_preamble (chunks):
+ global format
+ if format == 'html':
+ scan_html_preamble (chunks)
+ elif format == 'latex':
+ scan_latex_preamble (chunks)
+ elif format == 'texi':
+ scan_texi_preamble (chunks)
+
+
+def completize_preamble (chunks):
+ global format
+ if format != 'latex':
+ return chunks
+ pre_b = post_b = graphics_b = None
+ for chunk in chunks:
+ if chunk[0] == 'preamble-end':
+ break
+ if chunk[0] == 'input':
+ m = get_re ('def-pre-re').search (chunk[1])
+ if m:
+ pre_b = 1
+ if chunk[0] == 'input':
+ m = get_re ('def-post-re').search (chunk[1])
+ if m:
+ post_b = 1
+
+ if chunk[0] == 'input':
+ m = get_re ('usepackage-graphics').search (chunk[1])
+ if m:
+ graphics_b = 1
+ x = 0
+ while x < len (chunks) and chunks[x][0] != 'preamble-end':
+ x = x + 1
+
+ if x == len (chunks):
+ return chunks
+
+ if not pre_b:
+ chunks.insert (x, ('input', get_output ('output-default-pre')))
+ if not post_b:
+ chunks.insert (x, ('input', get_output ('output-default-post')))
+ if not graphics_b:
+ chunks.insert (x, ('input', get_output ('usepackage-graphics')))
+
+ return chunks
+
+
+read_files = []
+def find_file (name):
+ '''
+ Search the include path for NAME. If found, return the (CONTENTS, PATH) of the file.
+ '''
+
+ if name == '-':
+ return (sys.stdin.read (), '<stdin>')
+ f = None
+ nm = ''
+ for a in include_path:
+ try:
+ nm = os.path.join (a, name)
+ f = open (nm)
+ global read_files
+ read_files.append (nm)
+ break
+ except IOError:
+ pass
+ if f:
+ sys.stderr.write ("Reading `%s'\n" % nm)
+ return (f.read (), nm)
+ else:
+ error ("File not found `%s'\n" % name)
+ return ('', '')
+
+def do_ignore (match_object):
+ return [('ignore', match_object.group ('code'))]
+def do_preamble_end (match_object):
+ return [('preamble-end', match_object.group ('code'))]
+
+def make_verbatim (match_object):
+ return [('verbatim', match_object.group ('code'))]
+
+def make_verb (match_object):
+ return [('verb', match_object.group ('code'))]
+
+def do_include_file (m):
+ "m: MatchObject"
+ return [('input', get_output ('pagebreak'))] \
+ + read_doc_file (m.group ('filename')) \
+ + [('input', get_output ('pagebreak'))]
+
+def do_input_file (m):
+ return read_doc_file (m.group ('filename'))
+
+def make_lilypond (m):
+ if m.group ('options'):
+ options = m.group ('options')
+ else:
+ options = ''
+ return [('input', get_output ('output-lilypond-fragment') %
+ (options, m.group ('code')))]
+
+def make_lilypond_file (m):
+ '''
+
+ Find @lilypondfile{bla.ly} occurences and substitute bla.ly
+ into a @lilypond .. @end lilypond block.
+
+ '''
+
+ if m.group ('options'):
+ options = get_re ('option-sep').split (m.group ('options'))
+ else:
+ options = []
+ (content, nm) = find_file (m.group ('filename'))
+ options.append ("filename=%s" % nm)
+ (path, base) = os.path.split (nm)
+
+ if path not in include_path:
+ include_path.append (path)
+
+ return [('lilypond', content, options)]
+
+
+def make_ly2dvi_block (m):
+ '''
+
+ Find <ly2dvifile .. >
+ '''
+
+ return [('ly2dvi', m.group ('filename'), m.group ('options'))]
+
+
+def make_lilypond_block (m):
+ if not g_do_music:
+ return []
+
+ if m.group ('options'):
+ options = get_re ('option-sep').split (m.group ('options'))
+ else:
+ options = []
+ options = filter (lambda s: s != '', options)
+ return [('lilypond', m.group ('code'), options)]
+
+
+def do_columns (m):
+ global format
+ if format != 'latex':
+ return []
+ if m.group ('num') == 'one':
+ return [('numcols', m.group ('code'), 1)]
+ if m.group ('num') == 'two':
+ return [('numcols', m.group ('code'), 2)]
+
+def do_multicols (m):
+ global format
+ if format != 'latex':
+ return []
+ if m.group ('be') == 'begin':
+ return [('multicols', m.group ('code'), int (m.group ('num')))]
+ else:
+ return [('multicols', m.group ('code'), 1)]
+ return []
+
+def chop_chunks (chunks, re_name, func, use_match=0):
+ newchunks = []
+ for c in chunks:
+ if c[0] == 'input':
+ str = c[1]
+ while str:
+ m = get_re (re_name).search (str)
+ if m == None:
+ newchunks.append (('input', str))
+ str = ''
+ else:
+ if use_match:
+ newchunks.append (('input', str[:m.start ('match')]))
+ else:
+ newchunks.append (('input', str[:m.start (0)]))
+ #newchunks.extend (func (m))
+ # python 1.5 compatible:
+ newchunks = newchunks + func (m)
+ str = str [m.end (0):]
+ else:
+ newchunks.append (c)
+ return newchunks
+
+def determine_format (str):
+ """
+
+ SIDE EFFECT! This sets FORMAT and PAPERGURU
+
+ """
+
+ global format
+ if format == '':
+ html = re.search ('(?i)<[dh]tml', str[:200])
+ latex = re.search (r'''\\document''', str[:200])
+ texi = re.search ('@node|@setfilename', str[:200])
+
+ f = ''
+ g = None
+
+ if html and not latex and not texi:
+ f = 'html'
+ elif latex and not html and not texi:
+ f = 'latex'
+ elif texi and not html and not latex:
+ f = 'texi'
+ else:
+ error ("can't determine format, please specify")
+ format = f
+
+ global paperguru
+ if paperguru == None:
+ if format == 'html':
+ g = HtmlPaper ()
+ elif format == 'latex':
+ g = LatexPaper ()
+ elif format == 'texi':
+ g = TexiPaper ()
+
+ paperguru = g
+
+
+def read_doc_file (filename):
+ '''Read the input file, find verbatim chunks and do \input and \include
+ '''
+ (str, path) = find_file (filename)
+ determine_format (str)
+
+ chunks = [('input', str)]
+
+ # we have to check for verbatim before doing include,
+ # because we don't want to include files that are mentioned
+ # inside a verbatim environment
+ chunks = chop_chunks (chunks, 'verbatim', make_verbatim)
+
+ chunks = chop_chunks (chunks, 'verb', make_verb)
+ chunks = chop_chunks (chunks, 'multiline-comment', do_ignore)
+ #ugh fix input
+ chunks = chop_chunks (chunks, 'include', do_include_file, 1)
+ chunks = chop_chunks (chunks, 'input', do_input_file, 1)
+ return chunks
+
+
+taken_file_names = {}
+
+def unique_file_name (body):
+ return 'lily-' + `abs (hash (body))`
+
+def schedule_lilypond_block (chunk):
+ '''Take the body and options from CHUNK, figure out how the
+ real .ly should look. The .ly is written, and scheduled in
+ TODO.
+
+ Return: a single chunk.
+
+ The chunk pertaining to the lilypond output
+ has the format (TYPE_STR, MAIN_STR, OPTIONS, TODO, BASE),
+ where TODO has format [basename, extension, extension, ... ]
+ '''
+
+ (type, body, opts) = chunk
+ assert type == 'lilypond'
+ file_body = compose_full_body (body, opts)
+ ## Hmm, we should hash only lilypond source, and skip the
+ ## %options are ...
+ ## comment line
+ basename = unique_file_name (file_body)
+ for o in opts:
+ m = re.search ('filename="(.*?)"', o)
+ if m:
+ basename = m.group (1)
+ if not taken_file_names.has_key (basename):
+ taken_file_names[basename] = 0
+ else:
+ taken_file_names[basename] = taken_file_names[basename] + 1
+ basename = basename + "-t%i" % taken_file_names[basename]
+ update_file (file_body, os.path.join (g_outdir, basename) + '.ly')
+ needed_filetypes = ['tex']
+
+ if format == 'html' or g_make_html:
+ needed_filetypes.append ('eps')
+ needed_filetypes.append ('png')
+ if 'eps' in opts and not ('eps' in needed_filetypes):
+ needed_filetypes.append ('eps')
+
+ pathbase = os.path.join (g_outdir, basename)
+ def must_rebuild (base, ext1, ext2):
+
+ f2 = base + ext2
+ f1 = base + ext1
+ fp2 = base + '-page1' + ext2
+
+ isfile2 = os.path.isfile (f2)
+
+ if not isfile2 and os.path.isfile (fp2):
+ f2 = fp2
+ isfile2 = os.path.isfile (fp2)
+
+ if (os.path.isfile (f2) and isfile2 and
+ os.stat (f1)[stat.ST_MTIME] >
+ os.stat (f2)[stat.ST_MTIME]) or \
+ not isfile2:
+
+ return 1
+
+ todo = []
+ if 'tex' in needed_filetypes and must_rebuild (pathbase, '.ly', '.tex'):
+ todo.append ('tex')
+ if 'eps' in needed_filetypes and must_rebuild (pathbase, '.tex', '.eps'):
+ todo.append ('eps')
+ if 'png' in needed_filetypes and must_rebuild (pathbase, '.eps', '.png'):
+ todo.append ('png')
+
+ return ('lilypond', body, opts, todo, basename)
+
+def format_lilypond_block (chunk):
+ """
+
+ Figure out what should be left MAIN_STR (meant
+ for the main file) from a lilypond chunk: process
+ verbatim, and other options. Return: multiple chunks.
+
+
+ """
+
+
+ return_chunks = []
+
+ (type, body, opts, todo, basename) = chunk
+ assert type == 'lilypond'
+
+
+ newbody = ''
+ filename_chunk = None
+ if 'printfilename' in opts:
+ for o in opts:
+ m= re.match ("filename=(.*)", o)
+ if m:
+ template = get_output ("output-filename")
+ b = basename + '.ly'
+ human_base = os.path.basename (m.group (1))
+
+ ## todo: include path, but strip
+ ## first part of the path.
+ filename_chunk = ('input', template % (human_base, b,human_base))
+ break
+
+
+ if 'smallverbatim' in opts:
+ newbody += output_verbatim (body, 1)
+ elif 'verbatim' in opts:
+ newbody += output_verbatim (body, 0)
+
+ for o in opts:
+ m = re.search ('intertext="(.*?)"', o)
+ if m:
+ newbody = newbody + "\n"
+ if format == 'texi':
+ newbody = newbody + "@noindent\n"
+ elif format == 'latex':
+ newbody = newbody + "\\noindent\n"
+ newbody = newbody + m.group (1) + "\n"
+
+ if 'noinline' in opts:
+ s = 'output-noinline'
+ elif format == 'latex':
+ if 'quote' in opts:
+ s = 'output-latex-quoted'
+ elif 'eps' in opts:
+ s = 'output-eps'
+ else:
+ s = 'output-latex-noquote'
+ elif format == 'texi':
+ if 'quote' in opts:
+ s = 'output-texi-quoted'
+ else:
+ s = 'output-texi-noquote'
+ else: # format == 'html'
+ s = 'output-html'
+
+ def html_pages (basename):
+ pat = os.path.join (g_outdir, "%s-page*.png"% basename)
+
+ files = glob.glob (pat)
+
+
+ template = '''<img align="center" valign="center"
+ border="0" src="%s" alt="[picture of music]">'''
+
+ str = ''
+ if files == []:
+ files = [basename+'.png' ]
+ else:
+ files = map (os.path.basename, files)
+
+ for f in files:
+ str += template % f
+
+ str = '<a href="%s.ly">%s</a>' % (basename, str)
+
+ return str
+
+
+ newbody = newbody + get_output (s) % {'fn': basename,
+ 'htmlimages': html_pages(basename)
+ }
+
+ if filename_chunk:
+ return_chunks += [filename_chunk]
+
+ return_chunks += [('lilypond', newbody, opts, todo, basename)]
+
+ return return_chunks
+
+def format_lilypond_output_bodies (chunks):
+ newchunks = []
+ for c in chunks:
+
+ if c[0] == 'lilypond':
+ newchunks += format_lilypond_block (c)
+ else:
+ newchunks.append (c)
+
+ return newchunks
+
+
+
+def process_lilypond_blocks (chunks):#ugh rename
+ newchunks = []
+ # Count sections/chapters.
+ for c in chunks:
+ if c[0] == 'lilypond':
+ c = schedule_lilypond_block (c)
+ elif c[0] == 'numcols':
+ paperguru.m_num_cols = c[2]
+ elif c[0] == 'multicols':
+ paperguru.m_multicols = c[2]
+
+ newchunks.append (c)
+
+ return newchunks
+
+def process_ly2dvi_blocks (chunks):
+
+ def process_ly2dvi_block (chunk):
+ """
+
+Run ly2dvi script on filename specified in CHUNK.
+This is only supported for HTML output.
+
+In HTML output it will leave a download menu with ps/pdf/midi etc. in
+a separate HTML file, and a title + preview in the main html file,
+linking to the menu.
+
+ """
+ (tag, name, opts) = chunk
+ assert format == 'html'
+ (content, original_name) = find_file (name)
+
+ original_name = os.path.basename (original_name)
+
+ base = unique_file_name (content)
+ outname = base + '.ly'
+ changed = update_file (content, outname)
+
+ preview = base + ".preview.png"
+ preview_page = base + '-page1.png'
+
+ if changed or not (os.path.isfile (preview) or
+ os.path.isfile (preview_page)):
+
+ ly.system ('%s --preview --postscript --verbose %s ' % (ly2dvi_binary, base) )
+
+ ly.make_ps_images (base + '.ps')
+ ly.system ('gzip -9 - < %s.ps > %s.ps.gz' % (base, base))
+
+ def size_str (fn):
+ b = os.stat(fn)[stat.ST_SIZE]
+ if b < 1024:
+ return '%d bytes' % b
+ elif b < (2 << 20):
+ return '%d kb' % (b >> 10)
+ else:
+ return '%d mb' % (b >> 20)
+
+ exts = {
+ 'pdf' : "Print (PDF, %s)",
+ 'ps.gz' : "Print (gzipped PostScript, %s)",
+ 'png' : "View (PNG, %s)",
+ 'midi' : "Listen (MIDI, %s)",
+ 'ly' : "View source code (%s)",
+ }
+
+ menu = ''
+ page_files = glob.glob ('%s-page*.png' % base)
+
+ for p in page_files:
+ p = p.strip()
+ if os.path.isfile (p):
+ sz = size_str (p)
+ page = re.sub ('.*page([0-9])+.*', 'View page \\1 (PNG picture, %s)\n', p)
+ page = page % sz
+ menu += '<li><a href="%s">%s</a>' % (p, page)
+
+ ext_order = ['ly', 'pdf', 'ps.gz', 'midi']
+ for e in ext_order:
+ fn = base + '.' + e
+ print 'checking,' , fn
+ if not os.path.isfile (fn):
+ continue
+
+ entry = exts[e] % size_str (fn)
+
+ ## TODO: do something like
+ ## this for texinfo/latex as well ?
+
+ menu += '<li><a href="%s">%s</a>\n\n' % (fn, entry)
+
+
+ explanatory_para = """The pictures are 90dpi
+anti-aliased snapshots of the printed output, in PNG format. Both PDF and PS
+use scalable fonts and should look OK at any resolution."""
+
+ separate_menu =r'''
+<title>LilyPond example %s</title>
+
+<h1>%s</h1>
+<p><img src="%s">
+<p>%s
+<p>
+<ul>%s</ul>''' % (original_name,original_name, preview, explanatory_para, menu)
+
+ open (base + '.html','w'). write (separate_menu)
+
+ inline_menu = '<p/><a href="%s.html"><img alt="%s" src="%s"></a><p/>' % (base, original_name, preview)
+
+ return ('ly2dvi', inline_menu)
+
+ newchunks = []
+ for c in chunks:
+ if c[0] == 'ly2dvi':
+ c = process_ly2dvi_block (c)
+ newchunks.append (c)
+
+ return newchunks
+
+def compile_all_files (chunks):
+ global foutn
+ eps = []
+ tex = []
+ png = []
+
+ for c in chunks:
+ if c[0] != 'lilypond':
+ continue
+
+ base = c[4]
+ exts = c[3]
+ for e in exts:
+ if e == 'eps':
+ eps.append (base)
+ elif e == 'tex':
+ #ugh
+ if base + '.ly' not in tex:
+ tex.append (base + '.ly')
+ elif e == 'png' and g_do_pictures:
+ png.append (base)
+ d = os.getcwd ()
+ if g_outdir:
+ os.chdir (g_outdir)
+ if tex:
+ # fixme: be sys-independent.
+ def incl_opt (x):
+ if g_outdir and x[0] != '/' :
+ x = os.path.join (g_here_dir, x)
+ return ' -I %s' % x
+
+ incs = map (incl_opt, include_path)
+ lilyopts = string.join (incs)
+ if do_deps:
+ lilyopts += ' --dependencies'
+ if g_outdir:
+ lilyopts += ' --dep-prefix=' + g_outdir + '/'
+ lilyopts += ' --header=texidoc'
+ texfiles = string.join (tex)
+ cmd = string.join ((lilypond_binary, lilyopts, g_extra_opts,
+ texfiles))
+
+ ly.lilypond_version_check (lilypond_binary, '@TOPLEVEL_VERSION@')
+
+ ly.system (cmd, ignore_error = 0, progress_p = 1)
+
+ #
+ # Ugh, fixing up dependencies for .tex generation
+ #
+ if do_deps:
+ depfiles=map (lambda x: re.sub ('(.*)\.ly', '\\1.dep',
+ x), tex)
+
+ for i in depfiles:
+ f =open (i)
+ text=f.read ()
+ f.close ()
+ text=re.sub ('\n([^:\n]*):',
+ '\n' + foutn + ':', text)
+ f = open (i, 'w')
+ f.write (text)
+ f.close ()
+
+ def to_eps (file):
+ cmd = r"latex '\nonstopmode \input %s'" % file
+ # Ugh. (La)TeX writes progress and error messages on stdout
+ # Redirect to stderr
+ cmd = '(( %s >&2 ) >&- )' % cmd
+
+ ly.system (cmd)
+ ly.system ("dvips -Ppdf -u+lilypond.map -E -o %s.eps %s" % (file, file))
+ map (to_eps, eps)
+
+ for p in png:
+ ly.make_ps_images (p + '.eps', resolution=110)
+ os.chdir (d)
+
+
+def update_file (body, name):
+ '''
+ write the body if it has changed. Return whether BODY has changed.
+ '''
+ same = 0
+ try:
+ f = open (name)
+ fs = f.read (-1)
+ same = (fs == body)
+ except:
+ pass
+
+ if not same:
+ f = open (name , 'w')
+ f.write (body)
+ f.close ()
+
+ return not same
+
+
+def write_deps (fn, target, chunks):
+ global read_files
+ sys.stderr.write ('Writing `%s\'\n' % os.path.join (g_outdir, fn))
+ f = open (os.path.join (g_outdir, fn), 'w')
+ f.write ('%s%s: ' % (g_dep_prefix, target))
+ for d in read_files:
+ f.write ('%s ' % d)
+
+
+ ## There used to be code to write .tex dependencies, but
+ ## that is silly: lilypond-book has its own dependency scheme
+ ## to ensure that all lily-XXX.tex files are there
+
+
+ f.write ('\n')
+ f.close ()
+ read_files = []
+
+def check_texidoc (chunks):
+ ## TODO: put file name in front of texidoc.
+ ##
+ n = []
+ for c in chunks:
+ if c[0] == 'lilypond':
+ (type, body, opts, todo, basename) = c;
+ pathbase = os.path.join (g_outdir, basename)
+ if os.path.isfile (pathbase + '.texidoc') \
+ and 'notexidoc' not in opts:
+ n.append( ('input', '\n@include %s.texidoc\n\n' % basename))
+ n.append (c)
+ return n
+
+
+## what's this? Docme --hwn
+##
+def fix_epswidth (chunks):
+ newchunks = []
+ for c in chunks:
+ if c[0] != 'lilypond' or 'eps' not in c[2]:
+ newchunks.append (c)
+ continue
+
+ mag = 1.0
+ for o in c[2]:
+ m = re.match ('magnification=([0-9.]+)', o)
+ if m:
+ mag = string.atof (m.group (1))
+
+ def replace_eps_dim (match, lmag = mag):
+ filename = match.group (1)
+ dims = bounding_box_dimensions (filename)
+
+ return '%fpt' % (dims[0] *lmag)
+
+ body = re.sub (r'''\\lilypondepswidth{(.*?)}''', replace_eps_dim, c[1])
+ newchunks.append (('lilypond', body, c[2], c[3], c[4]))
+
+ return newchunks
+
+
+##docme: why global?
+foutn=""
+
+def do_file (input_filename):
+ chunks = read_doc_file (input_filename)
+ chunks = chop_chunks (chunks, 'ly2dvi', make_ly2dvi_block, 1)
+ chunks = chop_chunks (chunks, 'lilypond', make_lilypond, 1)
+ chunks = chop_chunks (chunks, 'lilypond-file', make_lilypond_file, 1)
+ chunks = chop_chunks (chunks, 'lilypond-block', make_lilypond_block, 1)
+ chunks = chop_chunks (chunks, 'singleline-comment', do_ignore, 1)
+ chunks = chop_chunks (chunks, 'preamble-end', do_preamble_end)
+ chunks = chop_chunks (chunks, 'numcols', do_columns)
+ chunks = chop_chunks (chunks, 'multicols', do_multicols)
+
+ scan_preamble (chunks)
+ chunks = process_lilypond_blocks (chunks)
+ chunks = process_ly2dvi_blocks (chunks)
+
+ # Do It.
+ global g_run_lilypond
+ if g_run_lilypond:
+ compile_all_files (chunks)
+ chunks = fix_epswidth (chunks)
+
+
+ chunks = format_lilypond_output_bodies (chunks)
+ global format
+ if format == 'texi':
+ chunks = check_texidoc (chunks)
+
+
+ x = 0
+ chunks = completize_preamble (chunks)
+
+ global foutn
+
+ if outname:
+ my_outname = outname
+ elif input_filename == '-' or input_filename == "/dev/stdin":
+ my_outname = '-'
+ else:
+ my_outname = os.path.basename (os.path.splitext (input_filename)[0]) + '.' + format
+ my_depname = my_outname + '.dep'
+
+ if my_outname == '-' or my_outname == '/dev/stdout':
+ fout = sys.stdout
+ foutn = "<stdout>"
+ global do_deps
+ do_deps = 0
+ else:
+ foutn = os.path.join (g_outdir, my_outname)
+ sys.stderr.write ("Writing `%s'\n" % foutn)
+ fout = open (foutn, 'w')
+ for c in chunks:
+ fout.write (c[1])
+ fout.close ()
+ # should chmod -w
+
+ if do_deps:
+ write_deps (my_depname, foutn, chunks)
+
+outname = ''
+try:
+ (sh, long) = ly.getopt_args (option_definitions)
+ (options, files) = getopt.getopt (sys.argv[1:], sh, long)
+
+except getopt.error, msg:
+ sys.stderr.write ('\n')
+ ly.error (_ ("getopt says: `%s\'" % s))
+ sys.stderr.write ('\n')
+ ly.help ()
+ ly.exit (2)
+
+do_deps = 0
+for opt in options:
+ o = opt[0]
+ a = opt[1]
+
+ if o == '--include' or o == '-I':
+ include_path.append (a)
+ elif o == '--version' or o == '-v':
+ ly.identify (sys.stdout)
+ sys.exit (0)
+ elif o == '--verbose' or o == '-V':
+ verbose_p = 1
+ elif o == '--format' or o == '-f':
+ format = a
+ if a == 'texi-html':
+ format = 'texi'
+ g_make_html = 1
+ elif o == '--outname' or o == '-o':
+ if len (files) > 1:
+ #HACK
+ sys.stderr.write ("lilypond-book is confused by --outname on multiple files")
+ sys.exit (1)
+ outname = a
+ elif o == '--help' or o == '-h':
+ ly.help ()
+ sys.exit (0)
+ elif o == '--no-lily' or o == '-n':
+ g_run_lilypond = 0
+ elif o == '--preview-resolution':
+ preview_resolution = string.atoi (a)
+ elif o == '--dependencies' or o == '-M':
+ do_deps = 1
+ elif o == '--default-music-fontsize':
+ default_music_fontsize = string.atoi (a)
+ elif o == '--default-lilypond-fontsize':
+ print "--default-lilypond-fontsize is deprecated, use --default-music-fontsize"
+ default_music_fontsize = string.atoi (a)
+ elif o == '--extra-options':
+ g_extra_opts = a
+ elif o == '--force-music-fontsize':
+ g_force_music_fontsize = string.atoi (a)
+ elif o == '--force-lilypond-fontsize':
+ print "--force-lilypond-fontsize is deprecated, use --default-lilypond-fontsize"
+ g_force_music_fontsize = string.atoi (a)
+ elif o == '--dep-prefix':
+ g_dep_prefix = a
+ elif o == '--no-pictures':
+ g_do_pictures = 0
+ elif o == '--no-music':
+ g_do_music = 0
+ elif o == '--outdir':
+ g_outdir = a
+ elif o == '--warranty' or o == '-w':
+ #status = os.system ('lilypond -w')
+ if 1 or status:
+ ly.warranty ()
+ sys.exit (0)
+
+ly.identify (sys.stderr)
+
+if g_outdir:
+ if os.path.isfile (g_outdir):
+ error ("outdir is a file: %s" % g_outdir)
+ if not os.path.exists (g_outdir):
+ os.mkdir (g_outdir)
+
+if not files:
+ ly.help ()
+ ly.error (_ ("no files specified on command line"))
+ ly.exit (2)
+
+ly.setup_environment ()
+
+
+for input_filename in files:
+ do_file (input_filename)
+
+
+#
+# Petr, ik zou willen dat ik iets zinvoller deed,
+# maar wat ik kan ik doen, het verandert toch niets?
+# --hwn 20/aug/99