+###| CMAKE Kiibohd Controller |###
+#
+# Jacob Alexander 2011-2013
+# Due to this file's usefulness:
+#
+# Released into the Public Domain
+#
+# avr-gcc CMake Build Configuration
+#
+###
+
+
+
+#| Set the Compilers (must be set first)
+include( CMakeForceCompiler )
+cmake_force_c_compiler ( avr-gcc AVRCCompiler )
+cmake_force_cxx_compiler( avr-g++ AVRCxxCompiler )
+
+
+#| Compiler Binaries
+set( OBJCOPY "avr-objcopy" )
+set( OBJDUMP "avr-objdump" )
+set( NM "avr-nm" )
+set( SIZE "avr-size" )
+
+
+
+###
+# Atmel Defines and Linker Options
+#
+
+#| MCU Name
+#| You _MUST_ set this to match the board you are using
+#| type "make clean" after changing this, so all files will be rebuilt
+#|
+#| "at90usb162" # Teensy 1.0
+#| "atmega32u4" # Teensy 2.0
+#| "at90usb646" # Teensy++ 1.0
+#| "at90usb1286" # Teensy++ 2.0
+#set( MCU "atmega32u4" )
+set( MCU "at90usb1286" )
+
+
+#| Extra Compiler Sources
+#| Mostly for convenience functions like interrupt handlers
+set( COMPILER_SRCS
+ # XXX Not needed for avr-gcc
+)
+
+
+#| Compiler flag to set the C Standard level.
+#| c89 = "ANSI" C
+#| gnu89 = c89 plus GCC extensions
+#| c99 = ISO C99 standard (not yet fully implemented)
+#| gnu99 = c99 plus GCC extensions
+set( CSTANDARD "-std=gnu99" )
+
+
+#| Warning Options
+#| -Wall...: warning level
+set( WARN "-Wall -Wstrict-prototypes" )
+
+
+#| Tuning Options
+#| -f...: tuning, see GCC manual and avr-libc documentation
+set( TUNING "-funsigned-char -funsigned-bitfields -ffunction-sections -fpack-struct -fshort-enums" )
+
+
+#| Optimization level, can be [0, 1, 2, 3, s].
+#| 0 = turn off optimization. s = optimize for size.
+#| (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+set( OPT "s" )
+
+
+#| Output Format
+#| srec, ihex, binary
+set( FORMAT "ihex" )
+
+
+#| Processor frequency.
+#| Normally the first thing your program should do is set the clock prescaler,
+#| so your program will run at the correct speed. You should also set this
+#| variable to same clock speed. The _delay_ms() macro uses this, and many
+#| examples use this variable to calculate timings. Do not add a "UL" here.
+set( F_CPU "16000000" )
+
+
+#| Dependency Files
+#| Compiler flags to generate dependency files.
+set( GENDEPFLAGS "-MMD -MP" )
+
+
+#| Compiler Flags
+add_definitions( "-mmcu=${MCU} -DF_CPU=${F_CPU} -O${OPT} ${TUNING} ${WARN} ${CSTANDARD} ${GENDEPFLAGS}" )
+
+
+#| Linker Flags
+set( LINKER_FLAGS "-mmcu=${MCU} -Wl,-Map=${TARGET}.map,--cref -Wl,--relax -Wl,--gc-sections" )
+
+
+#| Hex Flags (XXX, CMake seems to have issues if you quote the arguments for the custom commands...)
+set( HEX_FLAGS -O ${FORMAT} -R .eeprom -R .fuse -R .lock -R .signature )
+
+
+#| Eep Flags
+set( EEP_FLAGS -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ${FORMAT} )
+
+
+#| Lss Flags
+set( LSS_FLAGS -h -S -z )
+