X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=tmk_core%2Ftool%2Fmbed%2Fmbed-sdk%2Flibraries%2Fmbed%2Fapi%2FBusOut.h;fp=tmk_core%2Ftool%2Fmbed%2Fmbed-sdk%2Flibraries%2Fmbed%2Fapi%2FBusOut.h;h=1c55be07e987b869ef1f04b1d2434f03be7a7da2;hb=a3d96d3aa96318d339a67de1085e0ae495d57c84;hp=0000000000000000000000000000000000000000;hpb=1d5bac21dc6f1425b8ef4bbe7935330c37c3a93e;p=qmk_firmware.git

diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/api/BusOut.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/api/BusOut.h
new file mode 100644
index 000000000..1c55be07e
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/api/BusOut.h
@@ -0,0 +1,101 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSOUT_H
+#define MBED_BUSOUT_H
+
+#include "DigitalOut.h"
+
+namespace mbed {
+
+/** A digital output bus, used for setting the state of a collection of pins
+ */
+class BusOut {
+
+public:
+
+    /** Create an BusOut, connected to the specified pins
+     *
+     *  @param p<n> DigitalOut pin to connect to bus bit <n> (p5-p30, NC)
+     *
+     *  @note
+     *  It is only required to specify as many pin variables as is required
+     *  for the bus; the rest will default to NC (not connected)
+     */
+    BusOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+           PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+           PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+           PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+    BusOut(PinName pins[16]);
+
+    virtual ~BusOut();
+
+    /** Write the value to the output bus
+     *
+     *  @param value An integer specifying a bit to write for every corresponding DigitalOut pin
+     */
+    void write(int value);
+
+    /** Read the value currently output on the bus
+     *
+     *  @returns
+     *    An integer with each bit corresponding to associated DigitalOut pin setting
+     */
+    int read();
+
+    /** Binary mask of bus pins connected to actual pins (not NC pins)
+     *  If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+     *
+     *  @returns
+     *    Binary mask of connected pins
+     */
+    int mask() {
+        return _nc_mask;
+    }
+
+#ifdef MBED_OPERATORS
+    /** A shorthand for write()
+     */
+    BusOut& operator= (int v);
+    BusOut& operator= (BusOut& rhs);
+
+    /** Access to particular bit in random-iterator fashion
+     */
+    DigitalOut& operator[] (int index);
+
+    /** A shorthand for read()
+     */
+    operator int();
+#endif
+
+protected:
+    DigitalOut* _pin[16];
+
+    /** Mask of bus's NC pins
+     * If bit[n] is set to 1 - pin is connected
+     * if bit[n] is cleared - pin is not connected (NC)
+     */
+    int _nc_mask;
+
+   /* disallow copy constructor and assignment operators */
+private:
+    BusOut(const BusOut&);
+    BusOut & operator = (const BusOut&);
+};
+
+} // namespace mbed
+
+#endif