X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=tmk_core%2Fprotocol%2Flufa%2Flufa.c;h=cb918d3dce1453f4f11d16810480cf39d7c41eea;hb=7c9d5ace143d3cc6d767a354acde814926d566fd;hp=ba49284c9ba2b10bf621565263a62eaef7374fb1;hpb=e51001efcc3ff8b64f8264e8bd4c2dbea15f3364;p=qmk_firmware.git diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index ba49284c9..cb918d3dc 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -49,7 +49,7 @@ #endif #include "suspend.h" -#include "descriptor.h" +#include "usb_descriptor.h" #include "lufa.h" #include "quantum.h" #include @@ -67,10 +67,11 @@ #endif #ifdef BLUETOOTH_ENABLE - #include "bluetooth.h" -#endif -#ifdef ADAFRUIT_BLE_ENABLE + #ifdef MODULE_ADAFRUIT_BLE #include "adafruit_ble.h" + #else + #include "bluetooth.h" + #endif #endif #ifdef VIRTSER_ENABLE @@ -82,7 +83,7 @@ #endif #ifdef MIDI_ENABLE - #include "sysex_tools.h" + #include "qmk_midi.h" #endif #ifdef RAW_ENABLE @@ -96,12 +97,6 @@ static uint8_t keyboard_led_stats = 0; static report_keyboard_t keyboard_report_sent; -#ifdef MIDI_ENABLE -static void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2); -static void usb_get_midi(MidiDevice * device); -static void midi_usb_init(MidiDevice * device); -#endif - /* Host driver */ static uint8_t keyboard_leds(void); static void send_keyboard(report_keyboard_t *report); @@ -114,48 +109,8 @@ host_driver_t lufa_driver = { send_mouse, send_system, send_consumer, -#ifdef MIDI_ENABLE - usb_send_func, - usb_get_midi, - midi_usb_init -#endif }; -/******************************************************************************* - * MIDI - ******************************************************************************/ - -#ifdef MIDI_ENABLE -USB_ClassInfo_MIDI_Device_t USB_MIDI_Interface = -{ - .Config = - { - .StreamingInterfaceNumber = AS_INTERFACE, - .DataINEndpoint = - { - .Address = MIDI_STREAM_IN_EPADDR, - .Size = MIDI_STREAM_EPSIZE, - .Banks = 1, - }, - .DataOUTEndpoint = - { - .Address = MIDI_STREAM_OUT_EPADDR, - .Size = MIDI_STREAM_EPSIZE, - .Banks = 1, - }, - }, -}; - -#define SYSEX_START_OR_CONT 0x40 -#define SYSEX_ENDS_IN_1 0x50 -#define SYSEX_ENDS_IN_2 0x60 -#define SYSEX_ENDS_IN_3 0x70 - -#define SYS_COMMON_1 0x50 -#define SYS_COMMON_2 0x20 -#define SYS_COMMON_3 0x30 -#endif - #ifdef VIRTSER_ENABLE USB_ClassInfo_CDC_Device_t cdc_device = { @@ -186,6 +141,10 @@ USB_ClassInfo_CDC_Device_t cdc_device = #ifdef RAW_ENABLE +/** \brief Raw HID Send + * + * FIXME: Needs doc + */ void raw_hid_send( uint8_t *data, uint8_t length ) { // TODO: implement variable size packet @@ -217,6 +176,10 @@ void raw_hid_send( uint8_t *data, uint8_t length ) Endpoint_SelectEndpoint(ep); } +/** \brief Raw HID Receive + * + * FIXME: Needs doc + */ __attribute__ ((weak)) void raw_hid_receive( uint8_t *data, uint8_t length ) { @@ -225,6 +188,10 @@ void raw_hid_receive( uint8_t *data, uint8_t length ) // so users can opt to not handle data coming in. } +/** \brief Raw HID Task + * + * FIXME: Needs doc + */ static void raw_hid_task(void) { // Create a temporary buffer to hold the read in data from the host @@ -263,6 +230,10 @@ static void raw_hid_task(void) * Console ******************************************************************************/ #ifdef CONSOLE_ENABLE +/** \brief Console Task + * + * FIXME: Needs doc + */ static void Console_Task(void) { /* Device must be connected and configured for the task to run */ @@ -327,6 +298,10 @@ static void Console_Task(void) * 2) EVENT_USB_Device_Reset * 3) EVENT_USB_Device_Wake */ +/** \brief Event USB Device Connect + * + * FIXME: Needs doc + */ void EVENT_USB_Device_Connect(void) { print("[C]"); @@ -338,6 +313,10 @@ void EVENT_USB_Device_Connect(void) } } +/** \brief Event USB Device Connect + * + * FIXME: Needs doc + */ void EVENT_USB_Device_Disconnect(void) { print("[D]"); @@ -352,11 +331,19 @@ void EVENT_USB_Device_Disconnect(void) */ } +/** \brief Event USB Device Connect + * + * FIXME: Needs doc + */ void EVENT_USB_Device_Reset(void) { print("[R]"); } +/** \brief Event USB Device Connect + * + * FIXME: Needs doc + */ void EVENT_USB_Device_Suspend() { print("[S]"); @@ -365,6 +352,10 @@ void EVENT_USB_Device_Suspend() #endif } +/** \brief Event USB Device Connect + * + * FIXME: Needs doc + */ void EVENT_USB_Device_WakeUp() { print("[W]"); @@ -387,7 +378,11 @@ static bool console_flush = false; } \ } while (0) -// called every 1ms +/** \brief Event USB Device Start Of Frame + * + * FIXME: Needs doc + * called every 1ms + */ void EVENT_USB_Device_StartOfFrame(void) { static uint8_t count; @@ -401,11 +396,12 @@ void EVENT_USB_Device_StartOfFrame(void) #endif -/** Event handler for the USB_ConfigurationChanged event. +/** \brief Event handler for the USB_ConfigurationChanged event. + * * This is fired when the host sets the current configuration of the USB device after enumeration. * * ATMega32u2 supports dual bank(ping-pong mode) only on endpoint 3 and 4, - * it is safe to use singl bank for all endpoints. + * it is safe to use single bank for all endpoints. */ void EVENT_USB_Device_ConfigurationChanged(void) { @@ -463,7 +459,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) #endif } -/* +/* FIXME: Expose this table in the docs somehow Appendix G: HID Request Support Requirements The following table enumerates the requests that need to be supported by various types of HID class devices. @@ -476,7 +472,8 @@ Boot Keyboard Required Optional Required Required Required Requ Non-Boot Keybrd Required Optional Required Required Optional Optional Other Device Required Optional Optional Optional Optional Optional */ -/** Event handler for the USB_ControlRequest event. +/** \brief Event handler for the USB_ControlRequest event. + * * This is fired before passing along unhandled control requests to the library for processing internally. */ void EVENT_USB_Device_ControlRequest(void) @@ -591,29 +588,42 @@ void EVENT_USB_Device_ControlRequest(void) /******************************************************************************* * Host driver ******************************************************************************/ +/** \brief Keyboard LEDs + * + * FIXME: Needs doc + */ static uint8_t keyboard_leds(void) { return keyboard_led_stats; } +/** \brief Send Keyboard + * + * FIXME: Needs doc + */ static void send_keyboard(report_keyboard_t *report) { uint8_t timeout = 255; uint8_t where = where_to_send(); #ifdef BLUETOOTH_ENABLE - if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) { - bluefruit_serial_send(0xFD); - for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) { - bluefruit_serial_send(report->raw[i]); - } - } -#endif - -#ifdef ADAFRUIT_BLE_ENABLE - if (where == OUTPUT_ADAFRUIT_BLE) { + if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) { + #ifdef MODULE_ADAFRUIT_BLE adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys)); - } + #elif MODULE_RN42 + bluefruit_serial_send(0xFD); + bluefruit_serial_send(0x09); + bluefruit_serial_send(0x01); + for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) { + bluefruit_serial_send(report->raw[i]); + } + #else + bluefruit_serial_send(0xFD); + for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) { + bluefruit_serial_send(report->raw[i]); + } + #endif + } #endif if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) { @@ -652,7 +662,11 @@ static void send_keyboard(report_keyboard_t *report) keyboard_report_sent = *report; } - + +/** \brief Send Mouse + * + * FIXME: Needs doc + */ static void send_mouse(report_mouse_t *report) { #ifdef MOUSE_ENABLE @@ -660,24 +674,22 @@ static void send_mouse(report_mouse_t *report) uint8_t where = where_to_send(); #ifdef BLUETOOTH_ENABLE - if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) { - bluefruit_serial_send(0xFD); - bluefruit_serial_send(0x00); - bluefruit_serial_send(0x03); - bluefruit_serial_send(report->buttons); - bluefruit_serial_send(report->x); - bluefruit_serial_send(report->y); - bluefruit_serial_send(report->v); // should try sending the wheel v here - bluefruit_serial_send(report->h); // should try sending the wheel h here - bluefruit_serial_send(0x00); - } -#endif - -#ifdef ADAFRUIT_BLE_ENABLE - if (where == OUTPUT_ADAFRUIT_BLE) { + if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) { + #ifdef MODULE_ADAFRUIT_BLE // FIXME: mouse buttons - adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h); - } + adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h, report->buttons); + #else + bluefruit_serial_send(0xFD); + bluefruit_serial_send(0x00); + bluefruit_serial_send(0x03); + bluefruit_serial_send(report->buttons); + bluefruit_serial_send(report->x); + bluefruit_serial_send(report->y); + bluefruit_serial_send(report->v); // should try sending the wheel v here + bluefruit_serial_send(report->h); // should try sending the wheel h here + bluefruit_serial_send(0x00); + #endif + } #endif if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) { @@ -699,6 +711,10 @@ static void send_mouse(report_mouse_t *report) #endif } +/** \brief Send System + * + * FIXME: Needs doc + */ static void send_system(uint16_t data) { uint8_t timeout = 255; @@ -720,6 +736,10 @@ static void send_system(uint16_t data) Endpoint_ClearIN(); } +/** \brief Send Consumer + * + * FIXME: Needs doc + */ static void send_consumer(uint16_t data) { uint8_t timeout = 255; @@ -727,6 +747,19 @@ static void send_consumer(uint16_t data) #ifdef BLUETOOTH_ENABLE if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) { + #ifdef MODULE_ADAFRUIT_BLE + adafruit_ble_send_consumer_key(data, 0); + #elif MODULE_RN42 + static uint16_t last_data = 0; + if (data == last_data) return; + last_data = data; + uint16_t bitmap = CONSUMER2RN42(data); + bluefruit_serial_send(0xFD); + bluefruit_serial_send(0x03); + bluefruit_serial_send(0x03); + bluefruit_serial_send(bitmap&0xFF); + bluefruit_serial_send((bitmap>>8)&0xFF); + #else static uint16_t last_data = 0; if (data == last_data) return; last_data = data; @@ -740,12 +773,7 @@ static void send_consumer(uint16_t data) bluefruit_serial_send(0x00); bluefruit_serial_send(0x00); bluefruit_serial_send(0x00); - } -#endif - -#ifdef ADAFRUIT_BLE_ENABLE - if (where == OUTPUT_ADAFRUIT_BLE) { - adafruit_ble_send_consumer_key(data, 0); + #endif } #endif @@ -773,6 +801,10 @@ static void send_consumer(uint16_t data) ******************************************************************************/ #ifdef CONSOLE_ENABLE #define SEND_TIMEOUT 5 +/** \brief Send Char + * + * FIXME: Needs doc + */ int8_t sendchar(uint8_t c) { // Not wait once timeouted. @@ -841,170 +873,32 @@ int8_t sendchar(uint8_t c) ******************************************************************************/ #ifdef MIDI_ENABLE -static void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2) { - MIDI_EventPacket_t event; - event.Data1 = byte0; - event.Data2 = byte1; - event.Data3 = byte2; - - uint8_t cable = 0; - -// Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPNUM); - - //if the length is undefined we assume it is a SYSEX message - if (midi_packet_length(byte0) == UNDEFINED) { - switch(cnt) { - case 3: - if (byte2 == SYSEX_END) - event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_3); - else - event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT); - break; - case 2: - if (byte1 == SYSEX_END) - event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_2); - else - event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT); - break; - case 1: - if (byte0 == SYSEX_END) - event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_1); - else - event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT); - break; - default: - return; //invalid cnt - } - } else { - //deal with 'system common' messages - //TODO are there any more? - switch(byte0 & 0xF0){ - case MIDI_SONGPOSITION: - event.Event = MIDI_EVENT(cable, SYS_COMMON_3); - break; - case MIDI_SONGSELECT: - case MIDI_TC_QUARTERFRAME: - event.Event = MIDI_EVENT(cable, SYS_COMMON_2); - break; - default: - event.Event = MIDI_EVENT(cable, byte0); - break; - } - } - -// Endpoint_Write_Stream_LE(&event, sizeof(event), NULL); -// Endpoint_ClearIN(); - - MIDI_Device_SendEventPacket(&USB_MIDI_Interface, &event); - MIDI_Device_Flush(&USB_MIDI_Interface); - MIDI_Device_USBTask(&USB_MIDI_Interface); - USB_USBTask(); -} - -static void usb_get_midi(MidiDevice * device) { - MIDI_EventPacket_t event; - while (MIDI_Device_ReceiveEventPacket(&USB_MIDI_Interface, &event)) { - - midi_packet_length_t length = midi_packet_length(event.Data1); - uint8_t input[3]; - input[0] = event.Data1; - input[1] = event.Data2; - input[2] = event.Data3; - if (length == UNDEFINED) { - //sysex - if (event.Event == MIDI_EVENT(0, SYSEX_START_OR_CONT) || event.Event == MIDI_EVENT(0, SYSEX_ENDS_IN_3)) { - length = 3; - } else if (event.Event == MIDI_EVENT(0, SYSEX_ENDS_IN_2)) { - length = 2; - } else if(event.Event == MIDI_EVENT(0, SYSEX_ENDS_IN_1)) { - length = 1; - } else { - //XXX what to do? - } - } - - //pass the data to the device input function - if (length != UNDEFINED) - midi_device_input(device, length, input); - } - MIDI_Device_USBTask(&USB_MIDI_Interface); - USB_USBTask(); -} - -static void midi_usb_init(MidiDevice * device){ - midi_device_init(device); - midi_device_set_send_func(device, usb_send_func); - midi_device_set_pre_input_process_func(device, usb_get_midi); - - // SetupHardware(); - sei(); -} - -void MIDI_Task(void) +USB_ClassInfo_MIDI_Device_t USB_MIDI_Interface = { - - /* Device must be connected and configured for the task to run */ - dprint("in MIDI_TASK\n"); - if (USB_DeviceState != DEVICE_STATE_Configured) - return; - dprint("continuing in MIDI_TASK\n"); - - Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPADDR); - - if (Endpoint_IsINReady()) + .Config = + { + .StreamingInterfaceNumber = AS_INTERFACE, + .DataINEndpoint = { - - dprint("Endpoint is ready\n"); - - uint8_t MIDICommand = 0; - uint8_t MIDIPitch; - - /* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */ - uint8_t Channel = MIDI_CHANNEL(1); - - MIDICommand = MIDI_COMMAND_NOTE_ON; - MIDIPitch = 0x3E; - - /* Check if a MIDI command is to be sent */ - if (MIDICommand) - { - dprint("Command exists\n"); - MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t) - { - .Event = MIDI_EVENT(0, MIDICommand), - - .Data1 = MIDICommand | Channel, - .Data2 = MIDIPitch, - .Data3 = MIDI_STANDARD_VELOCITY, - }; - - /* Write the MIDI event packet to the endpoint */ - Endpoint_Write_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL); - - /* Send the data in the endpoint to the host */ - Endpoint_ClearIN(); - } - } - - - /* Select the MIDI OUT stream */ - Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPADDR); - - /* Check if a MIDI command has been received */ - if (Endpoint_IsOUTReceived()) + .Address = MIDI_STREAM_IN_EPADDR, + .Size = MIDI_STREAM_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = { - MIDI_EventPacket_t MIDIEvent; + .Address = MIDI_STREAM_OUT_EPADDR, + .Size = MIDI_STREAM_EPSIZE, + .Banks = 1, + }, + }, +}; - /* Read the MIDI event packet from the endpoint */ - Endpoint_Read_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL); +void send_midi_packet(MIDI_EventPacket_t* event) { + MIDI_Device_SendEventPacket(&USB_MIDI_Interface, event); +} - /* If the endpoint is now empty, clear the bank */ - if (!(Endpoint_BytesInEndpoint())) - { - /* Clear the endpoint ready for new packet */ - Endpoint_ClearOUT(); - } - } +bool recv_midi_packet(MIDI_EventPacket_t* const event) { + return MIDI_Device_ReceiveEventPacket(&USB_MIDI_Interface, event); } #endif @@ -1014,18 +908,30 @@ void MIDI_Task(void) ******************************************************************************/ #ifdef VIRTSER_ENABLE +/** \brief Virtual Serial Init + * + * FIXME: Needs doc + */ void virtser_init(void) { cdc_device.State.ControlLineStates.DeviceToHost = CDC_CONTROL_LINE_IN_DSR ; CDC_Device_SendControlLineStateChange(&cdc_device); } +/** \brief Virtual Serial Receive + * + * FIXME: Needs doc + */ void virtser_recv(uint8_t c) __attribute__ ((weak)); void virtser_recv(uint8_t c) { // Ignore by default } +/** \brief Virtual Serial Task + * + * FIXME: Needs doc + */ void virtser_task(void) { uint16_t count = CDC_Device_BytesReceived(&cdc_device); @@ -1036,6 +942,10 @@ void virtser_task(void) virtser_recv(ch); } } +/** \brief Virtual Serial Send + * + * FIXME: Needs doc + */ void virtser_send(const uint8_t byte) { uint8_t timeout = 255; @@ -1068,6 +978,10 @@ void virtser_send(const uint8_t byte) /******************************************************************************* * main ******************************************************************************/ +/** \brief Setup MCU + * + * FIXME: Needs doc + */ static void setup_mcu(void) { /* Disable watchdog if enabled by bootloader/fuses */ @@ -1081,6 +995,10 @@ static void setup_mcu(void) CLKPR = (0 << CLKPS3) | (0 << CLKPS2) | (0 << CLKPS1) | (0 << CLKPS0); } +/** \brief Setup USB + * + * FIXME: Needs doc + */ static void setup_usb(void) { // Leonardo needs. Without this USB device is not recognized. @@ -1093,24 +1011,15 @@ static void setup_usb(void) print_set_sendchar(sendchar); } - -#ifdef MIDI_ENABLE -void fallthrough_callback(MidiDevice * device, - uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2); -void cc_callback(MidiDevice * device, - uint8_t chan, uint8_t num, uint8_t val); -void sysex_callback(MidiDevice * device, - uint16_t start, uint8_t length, uint8_t * data); -#endif - +/** \brief Main + * + * FIXME: Needs doc + */ int main(void) __attribute__ ((weak)); int main(void) { - #ifdef MIDI_ENABLE - midi_device_init(&midi_device); - midi_device_set_send_func(&midi_device, usb_send_func); - midi_device_set_pre_input_process_func(&midi_device, usb_get_midi); + setup_midi(); #endif setup_mcu(); @@ -1118,19 +1027,7 @@ int main(void) setup_usb(); sei(); -#ifdef MIDI_ENABLE - midi_register_fallthrough_callback(&midi_device, fallthrough_callback); - midi_register_cc_callback(&midi_device, cc_callback); - midi_register_sysex_callback(&midi_device, sysex_callback); - - // init_notes(); - // midi_send_cc(&midi_device, 0, 1, 2); - // midi_send_cc(&midi_device, 15, 1, 0); - // midi_send_noteon(&midi_device, 0, 64, 127); - // midi_send_noteoff(&midi_device, 0, 64, 127); -#endif - -#ifdef BLUETOOTH_ENABLE +#if defined(MODULE_ADAFRUIT_EZKEY) || defined(MODULE_RN42) serial_init(); #endif @@ -1161,7 +1058,7 @@ int main(void) print("Keyboard start.\n"); while (1) { - #if !defined(BLUETOOTH_ENABLE) && !defined(ADAFRUIT_BLE_ENABLE) + #if !defined(NO_USB_STARTUP_CHECK) while (USB_DeviceState == DEVICE_STATE_Suspended) { print("[s]"); suspend_power_down(); @@ -1174,15 +1071,14 @@ int main(void) keyboard_task(); #ifdef MIDI_ENABLE - midi_device_process(&midi_device); - // MIDI_Task(); + MIDI_Device_USBTask(&USB_MIDI_Interface); #endif #if defined(RGBLIGHT_ANIMATIONS) & defined(RGBLIGHT_ENABLE) rgblight_task(); #endif -#ifdef ADAFRUIT_BLE_ENABLE +#ifdef MODULE_ADAFRUIT_BLE adafruit_ble_task(); #endif @@ -1202,71 +1098,10 @@ int main(void) } } -#ifdef MIDI_ENABLE -void fallthrough_callback(MidiDevice * device, - uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2){ - -#ifdef AUDIO_ENABLE - if (cnt == 3) { - switch (byte0 & 0xF0) { - case MIDI_NOTEON: - play_note(((double)261.6)*pow(2.0, -4.0)*pow(2.0,(byte1 & 0x7F)/12.0), (byte2 & 0x7F) / 8); - break; - case MIDI_NOTEOFF: - stop_note(((double)261.6)*pow(2.0, -4.0)*pow(2.0,(byte1 & 0x7F)/12.0)); - break; - } - } - if (byte0 == MIDI_STOP) { - stop_all_notes(); - } -#endif -} - - -void cc_callback(MidiDevice * device, - uint8_t chan, uint8_t num, uint8_t val) { - //sending it back on the next channel - // midi_send_cc(device, (chan + 1) % 16, num, val); -} - -#ifdef API_SYSEX_ENABLE -uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0}; -#endif - -void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) { - #ifdef API_SYSEX_ENABLE - // SEND_STRING("\n"); - // send_word(start); - // SEND_STRING(": "); - // Don't store the header - int16_t pos = start - 4; - for (uint8_t place = 0; place < length; place++) { - // send_byte(*data); - if (pos >= 0) { - if (*data == 0xF7) { - // SEND_STRING("\nRD: "); - // for (uint8_t i = 0; i < start + place + 1; i++){ - // send_byte(midi_buffer[i]); - // SEND_STRING(" "); - // } - const unsigned decoded_length = sysex_decoded_length(pos); - uint8_t decoded[API_SYSEX_MAX_SIZE]; - sysex_decode(decoded, midi_buffer, pos); - process_api(decoded_length, decoded); - return; - } - else if (pos >= MIDI_SYSEX_BUFFER) { - return; - } - midi_buffer[pos] = *data; - } - // SEND_STRING(" "); - data++; - pos++; - } - #endif +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint16_t wIndex, + const void** const DescriptorAddress) +{ + return get_usb_descriptor(wValue, wIndex, DescriptorAddress); } - -#endif