X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=tmk_core%2Fprotocol%2Flufa%2Flufa.c;h=097189770668460ad3e817a64babc039fd1c64fd;hb=a305da2bc9ca5fbca7564d931088271048751d4b;hp=39d4824b6b9cb6a5b5c56394d720a021bb1cb70f;hpb=51ae6da99edd732ccdec6e102bd757e08950d23b;p=qmk_firmware.git diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 39d4824b6..097189770 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -52,6 +52,7 @@ #include "descriptor.h" #include "lufa.h" #include "quantum.h" +#include #ifdef NKRO_ENABLE #include "keycode_config.h" @@ -67,19 +68,26 @@ #ifdef BLUETOOTH_ENABLE #include "bluetooth.h" #endif +#ifdef ADAFRUIT_BLE_ENABLE + #include "adafruit_ble.h" +#endif #ifdef VIRTSER_ENABLE #include "virtser.h" #endif #if (defined(RGB_MIDI) | defined(RGBLIGHT_ANIMATIONS)) & defined(RGBLIGHT_ENABLE) - #include "rgblight.h" + #include "rgblight.h" #endif #ifdef MIDI_ENABLE #include "sysex_tools.h" #endif +#ifdef RAW_ENABLE + #include "raw_hid.h" +#endif + uint8_t keyboard_idle = 0; /* 0: Boot Protocol, 1: Report Protocol(default) */ uint8_t keyboard_protocol = 1; @@ -175,6 +183,80 @@ USB_ClassInfo_CDC_Device_t cdc_device = }; #endif +#ifdef RAW_ENABLE + +void raw_hid_send( uint8_t *data, uint8_t length ) +{ + // TODO: implement variable size packet + if ( length != RAW_EPSIZE ) + { + return; + } + + if (USB_DeviceState != DEVICE_STATE_Configured) + { + return; + } + + // TODO: decide if we allow calls to raw_hid_send() in the middle + // of other endpoint usage. + uint8_t ep = Endpoint_GetCurrentEndpoint(); + + Endpoint_SelectEndpoint(RAW_IN_EPNUM); + + // Check to see if the host is ready to accept another packet + if (Endpoint_IsINReady()) + { + // Write data + Endpoint_Write_Stream_LE(data, RAW_EPSIZE, NULL); + // Finalize the stream transfer to send the last packet + Endpoint_ClearIN(); + } + + Endpoint_SelectEndpoint(ep); +} + +__attribute__ ((weak)) +void raw_hid_receive( uint8_t *data, uint8_t length ) +{ + // Users should #include "raw_hid.h" in their own code + // and implement this function there. Leave this as weak linkage + // so users can opt to not handle data coming in. +} + +static void raw_hid_task(void) +{ + // Create a temporary buffer to hold the read in data from the host + uint8_t data[RAW_EPSIZE]; + bool data_read = false; + + // Device must be connected and configured for the task to run + if (USB_DeviceState != DEVICE_STATE_Configured) + return; + + Endpoint_SelectEndpoint(RAW_OUT_EPNUM); + + // Check to see if a packet has been sent from the host + if (Endpoint_IsOUTReceived()) + { + // Check to see if the packet contains data + if (Endpoint_IsReadWriteAllowed()) + { + /* Read data */ + Endpoint_Read_Stream_LE(data, sizeof(data), NULL); + data_read = true; + } + + // Finalize the stream transfer to receive the last packet + Endpoint_ClearOUT(); + + if ( data_read ) + { + raw_hid_receive( data, sizeof(data) ); + } + } +} +#endif /******************************************************************************* * Console @@ -294,10 +376,14 @@ void EVENT_USB_Device_WakeUp() #endif } + + #ifdef CONSOLE_ENABLE static bool console_flush = false; #define CONSOLE_FLUSH_SET(b) do { \ - uint8_t sreg = SREG; cli(); console_flush = b; SREG = sreg; \ + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {\ + console_flush = b; \ + } \ } while (0) // called every 1ms @@ -311,6 +397,7 @@ void EVENT_USB_Device_StartOfFrame(void) Console_Task(); console_flush = false; } + #endif /** Event handler for the USB_ConfigurationChanged event. @@ -339,6 +426,14 @@ void EVENT_USB_Device_ConfigurationChanged(void) EXTRAKEY_EPSIZE, ENDPOINT_BANK_SINGLE); #endif +#ifdef RAW_ENABLE + /* Setup Raw HID Report Endpoints */ + ConfigSuccess &= ENDPOINT_CONFIG(RAW_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, + RAW_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= ENDPOINT_CONFIG(RAW_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT, + RAW_EPSIZE, ENDPOINT_BANK_SINGLE); +#endif + #ifdef CONSOLE_ENABLE /* Setup Console HID Report Endpoints */ ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, @@ -501,9 +596,35 @@ static uint8_t keyboard_leds(void) return keyboard_led_stats; } +#define SendToUSB 1 +#define SendToBT 2 +#define SendToBLE 4 + +static inline uint8_t where_to_send(void) { +#ifdef ADAFRUIT_BLE_ENABLE +#if 0 + if (adafruit_ble_is_connected()) { + // For testing, send to BLE as a priority + return SendToBLE; + } +#endif + + // This is the real policy + if (USB_DeviceState != DEVICE_STATE_Configured) { + if (adafruit_ble_is_connected()) { + return SendToBLE; + } + } +#endif + return ((USB_DeviceState == DEVICE_STATE_Configured) ? SendToUSB : 0) +#ifdef BLUETOOTH_ENABLE + || SendToBT +#endif + ; +} + static void send_keyboard(report_keyboard_t *report) { - #ifdef BLUETOOTH_ENABLE bluefruit_serial_send(0xFD); for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) { @@ -512,9 +633,17 @@ static void send_keyboard(report_keyboard_t *report) #endif uint8_t timeout = 255; + uint8_t where = where_to_send(); - if (USB_DeviceState != DEVICE_STATE_Configured) - return; +#ifdef ADAFRUIT_BLE_ENABLE + if (where & SendToBLE) { + adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys)); + } +#endif + + if (!(where & SendToUSB)) { + return; + } /* Select the Keyboard Report Endpoint */ #ifdef NKRO_ENABLE @@ -567,8 +696,17 @@ static void send_mouse(report_mouse_t *report) uint8_t timeout = 255; - if (USB_DeviceState != DEVICE_STATE_Configured) - return; + uint8_t where = where_to_send(); + +#ifdef ADAFRUIT_BLE_ENABLE + if (where & SendToBLE) { + // FIXME: mouse buttons + adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h); + } +#endif + if (!(where & SendToUSB)) { + return; + } /* Select the Mouse Report Endpoint */ Endpoint_SelectEndpoint(MOUSE_IN_EPNUM); @@ -594,7 +732,7 @@ static void send_system(uint16_t data) report_extra_t r = { .report_id = REPORT_ID_SYSTEM, - .usage = data + .usage = data - SYSTEM_POWER_DOWN + 1 }; Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM); @@ -626,9 +764,16 @@ static void send_consumer(uint16_t data) #endif uint8_t timeout = 255; + uint8_t where = where_to_send(); - if (USB_DeviceState != DEVICE_STATE_Configured) - return; +#ifdef ADAFRUIT_BLE_ENABLE + if (where & SendToBLE) { + adafruit_ble_send_consumer_key(data, 0); + } +#endif + if (!(where & SendToUSB)) { + return; + } report_extra_t r = { .report_id = REPORT_ID_CONSUMER, @@ -1038,7 +1183,7 @@ int main(void) print("Keyboard start.\n"); while (1) { - #ifndef BLUETOOTH_ENABLE + #if !defined(BLUETOOTH_ENABLE) && !defined(ADAFRUIT_BLE_ENABLE) while (USB_DeviceState == DEVICE_STATE_Suspended) { print("[s]"); suspend_power_down(); @@ -1054,19 +1199,28 @@ int main(void) midi_device_process(&midi_device); // MIDI_Task(); #endif - + #if defined(RGBLIGHT_ANIMATIONS) & defined(RGBLIGHT_ENABLE) rgblight_task(); #endif +#ifdef ADAFRUIT_BLE_ENABLE + adafruit_ble_task(); +#endif + #ifdef VIRTSER_ENABLE virtser_task(); CDC_Device_USBTask(&cdc_device); #endif +#ifdef RAW_ENABLE + raw_hid_task(); +#endif + #if !defined(INTERRUPT_CONTROL_ENDPOINT) USB_USBTask(); #endif + } }