X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=tmk_core%2Fcommon%2Favr%2Fbootloader.c;h=34db8d0b0aa66c18538f978fac66e44f9938ed5c;hb=a8eba1bddaf55224939a86bfa4d8e1b53e1d82db;hp=fb9bf2d1c3328a2a441820bef7b377a58f168bed;hpb=685c8ba64c634d9ba419a714ca0e2cbae14b6dda;p=qmk_firmware.git

diff --git a/tmk_core/common/avr/bootloader.c b/tmk_core/common/avr/bootloader.c
index fb9bf2d1c..34db8d0b0 100644
--- a/tmk_core/common/avr/bootloader.c
+++ b/tmk_core/common/avr/bootloader.c
@@ -1,6 +1,7 @@
 #include <stdint.h>
 #include <stdbool.h>
 #include <avr/io.h>
+#include <avr/eeprom.h>
 #include <avr/interrupt.h>
 #include <avr/wdt.h>
 #include <util/delay.h>
@@ -38,7 +39,7 @@
  *          |               |                        |               |
  *          =               =                        =               =
  *          |               | 32KB-4KB               |               | 128KB-8KB
- * 0x6000   +---------------+               0x1FC00  +---------------+
+ * 0x7000   +---------------+               0x1E000  +---------------+
  *          |  Bootloader   | 4KB                    |  Bootloader   | 8KB
  * 0x7FFF   +---------------+               0x1FFFF  +---------------+
  *
@@ -64,8 +65,8 @@
 #define BOOTLOADER_START    (FLASH_SIZE - BOOTLOADER_SIZE)
 
 
-/* 
- * Entering the Bootloader via Software 
+/*
+ * Entering the Bootloader via Software
  * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html
  */
 #define BOOTLOADER_RESET_KEY 0xB007B007
@@ -89,6 +90,12 @@ void bootloader_jump(void) {
             _delay_ms(5);
         #endif
 
+        #ifdef BOOTLOADHID_BOOTLOADER
+            // force bootloadHID to stay in bootloader mode, so that it waits
+            // for a new firmware to be flashed
+            eeprom_write_byte((uint8_t *)1, 0x00);
+        #endif
+
         // watchdog reset
         reset_key = BOOTLOADER_RESET_KEY;
         wdt_enable(WDTO_250MS);
@@ -114,6 +121,11 @@ void bootloader_jump(void) {
     #endif
 }
 
+#ifdef __AVR_ATmega32A__
+// MCUSR is actually called MCUCSR in ATmega32A
+#define MCUSR MCUCSR
+#endif
+
 /* this runs before main() */
 void bootloader_jump_after_watchdog_reset(void) __attribute__ ((used, naked, section (".init3")));
 void bootloader_jump_after_watchdog_reset(void)
@@ -137,7 +149,7 @@ void bootloader_jump_after_watchdog_reset(void)
 #if 0
 /* Jumping To The Bootloader
  * http://www.pjrc.com/teensy/jump_to_bootloader.html
- * 
+ *
  * This method doen't work when using LUFA. idk why.
  * - needs to initialize more regisers or interrupt setting?
  */