X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=tmk_core%2Favr.mk;h=670e141bfdacefb53a05f90cfa5ad1e9ea03419e;hb=3538955778c253e68779605cc67c27e15d195729;hp=0d0eec3bf34e85d557ee2a90931ce8af2568ea80;hpb=5c44d40a0c208d706c8cd298ba90019b18841cb3;p=qmk_firmware.git

diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk
index 0d0eec3bf..670e141bf 100644
--- a/tmk_core/avr.mk
+++ b/tmk_core/avr.mk
@@ -6,10 +6,10 @@ CC = avr-gcc
 OBJCOPY = avr-objcopy
 OBJDUMP = avr-objdump
 SIZE = avr-size
-AR = avr-ar rcs
+AR = avr-ar
 NM = avr-nm
 HEX = $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature
-EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) 
+EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT)
 BIN =
 
 COMMON_VPATH += $(DRIVER_PATH)/avr
@@ -96,28 +96,53 @@ ifndef TEENSY_LOADER_CLI
     endif
 endif
 
+# Generate a .qmk for the QMK-FF
+qmk: $(BUILD_DIR)/$(TARGET).hex
+	zip $(TARGET).qmk -FSrj $(KEYMAP_PATH)/*
+	zip $(TARGET).qmk -u $<
+	printf "@ $<\n@=firmware.hex\n" | zipnote -w $(TARGET).qmk
+	printf "{\n  \"generated\": \"%s\"\n}" "$$(date)" > $(BUILD_DIR)/$(TARGET).json
+	if [ -f $(KEYBOARD_PATH_5)/info.json ]; then \
+		jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_5)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+	fi
+	if [ -f $(KEYBOARD_PATH_4)/info.json ]; then \
+		jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_4)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+	fi
+	if [ -f $(KEYBOARD_PATH_3)/info.json ]; then \
+		jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_3)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+	fi
+	if [ -f $(KEYBOARD_PATH_2)/info.json ]; then \
+		jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_2)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+	fi
+	if [ -f $(KEYBOARD_PATH_1)/info.json ]; then \
+		jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_1)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+	fi
+	zip $(TARGET).qmk -urj $(BUILD_DIR)/$(TARGET).json
+	printf "@ $(TARGET).json\n@=info.json\n" | zipnote -w $(TARGET).qmk
+
 # Program the device.
-program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep check-size
 	$(PROGRAM_CMD)
 
-teensy: $(BUILD_DIR)/$(TARGET).hex
+teensy: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
 	$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
-	
-BATCHISP ?= batchisp 
 
-flip: $(BUILD_DIR)/$(TARGET).hex
+BATCHISP ?= batchisp
+
+flip: $(BUILD_DIR)/$(TARGET).hex check-size
 	$(BATCHISP) -hardware usb -device $(MCU) -operation erase f
 	$(BATCHISP) -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
 	$(BATCHISP) -hardware usb -device $(MCU) -operation start reset 0
-	
+
 DFU_PROGRAMMER ?= dfu-programmer
+GREP ?= grep
 
-dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
+dfu: $(BUILD_DIR)/$(TARGET).hex cpfirmware check-size
 	until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\
 		echo "Error: Bootloader not found. Trying again in 5s." ;\
 		sleep 5 ;\
 	done
-	if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\
+	if $(DFU_PROGRAMMER) --version 2>&1 | $(GREP) -q 0.7 ; then\
 		$(DFU_PROGRAMMER) $(MCU) erase --force;\
 	else\
 		$(DFU_PROGRAMMER) $(MCU) erase;\
@@ -137,32 +162,101 @@ flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
 	$(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
 
 dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
-	if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\
+	if $(DFU_PROGRAMMER) --version 2>&1 | $(GREP) -q 0.7 ; then\
 		$(DFU_PROGRAMMER) $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep;\
 	else\
 		$(DFU_PROGRAMMER) $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep;\
 	fi
 	$(DFU_PROGRAMMER) $(MCU) reset
 
-avrdude: $(BUILD_DIR)/$(TARGET).hex
-	ls /dev/tty* > /tmp/1; \
-	echo "Detecting Pro Micro port, reset your Pro Micro now.\c"; \
-	while [ -z $$USB ]; do \
-	  sleep 1; \
-	  echo ".\c"; \
-	  ls /dev/tty* > /tmp/2; \
-	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
-	done; \
-	echo ""; \
-	echo "Detected Pro Micro port at $$USB"; \
-	sleep 1; \
-	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+dfu-split-left: $(BUILD_DIR)/$(TARGET).hex cpfirmware check-size
+	until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\
+		echo "Error: Bootloader not found. Trying again in 5s." ;\
+		sleep 5 ;\
+	done
+	if $(DFU_PROGRAMMER) --version 2>&1 | $(GREP) -q 0.7 ; then\
+		$(DFU_PROGRAMMER) $(MCU) erase --force;\
+		$(DFU_PROGRAMMER) $(MCU) flash --eeprom $(QUANTUM_PATH)/split_common/eeprom-lefthand.eep;\
+	else\
+		$(DFU_PROGRAMMER) $(MCU) erase;\
+		$(DFU_PROGRAMMER) $(MCU) flash-eeprom $(QUANTUM_PATH)/split_common/eeprom-lefthand.eep;\
+	fi
+	$(DFU_PROGRAMMER) $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
+	$(DFU_PROGRAMMER) $(MCU) reset
+
+dfu-split-right: $(BUILD_DIR)/$(TARGET).hex cpfirmware check-size
+	until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\
+		echo "Error: Bootloader not found. Trying again in 5s." ;\
+		sleep 5 ;\
+	done
+	if $(DFU_PROGRAMMER) --version 2>&1 | $(GREP) -q 0.7 ; then\
+		$(DFU_PROGRAMMER) $(MCU) erase --force;\
+		$(DFU_PROGRAMMER) $(MCU) flash --eeprom $(QUANTUM_PATH)/split_common/eeprom-righthand.eep;\
+	else\
+		$(DFU_PROGRAMMER) $(MCU) erase;\
+		$(DFU_PROGRAMMER) $(MCU) flash-eeprom $(QUANTUM_PATH)/split_common/eeprom-righthand.eep;\
+	fi
+	$(DFU_PROGRAMMER) $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
+	$(DFU_PROGRAMMER) $(MCU) reset
+
+define EXEC_AVRDUDE
+	USB= ;\
+	if $(GREP) -q -s Microsoft /proc/version; then \
+		echo 'ERROR: AVR flashing cannot be automated within the Windows Subsystem for Linux (WSL) currently. Instead, take the .hex file generated and flash it using AVRDUDE, AVRDUDESS, or XLoader.'; \
+	else \
+		printf "Detecting USB port, reset your controller now."; \
+		ls /dev/tty* > /tmp/1; \
+		while [ -z $$USB ]; do \
+			sleep 0.5; \
+			printf "."; \
+			ls /dev/tty* > /tmp/2; \
+			USB=`comm -13 /tmp/1 /tmp/2 | $(GREP) -o '/dev/tty.*'`; \
+			mv /tmp/2 /tmp/1; \
+		done; \
+		echo ""; \
+		echo "Device $$USB has appeared; assuming it is the controller."; \
+		if $(GREP) -q -s 'MINGW\|MSYS' /proc/version; then \
+			USB=`echo "$$USB" | perl -pne 's/\/dev\/ttyS(\d+)/COM.($$1+1)/e'`; \
+			echo "Remapped MSYS2 USB port to $$USB"; \
+			sleep 1; \
+		else \
+			printf "Waiting for $$USB to become writable."; \
+			while [ ! -w "$$USB" ]; do sleep 0.5; printf "."; done; echo ""; \
+		fi; \
+		if [ -z "$(1)" ]; then \
+			avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex; \
+		else \
+			avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex -U eeprom:w:$(QUANTUM_PATH)/split_common/$(1); \
+		fi \
+	fi
+endef
+
+avrdude: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+	$(call EXEC_AVRDUDE)
+
+avrdude-loop: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+	while true; do \
+		$(call EXEC_AVRDUDE) ; \
+	done
+
+avrdude-split-left: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+	$(call EXEC_AVRDUDE,eeprom-lefthand.eep)
+
+avrdude-split-right: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+	$(call EXEC_AVRDUDE,eeprom-righthand.eep)
+
+usbasp: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+	avrdude -p $(MCU) -c usbasp -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
 
 # Convert hex to bin.
-flashbin: $(BUILD_DIR)/$(TARGET).hex
+bin: $(BUILD_DIR)/$(TARGET).hex
 	$(OBJCOPY) -Iihex -Obinary $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
 	$(COPY) $(BUILD_DIR)/$(TARGET).bin $(TARGET).bin;
-	$(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin; 
+
+# copy bin to FLASH.bin
+flashbin: bin
+	$(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin;
 
 # Generate avr-gdb config/init file which does the following:
 #     define the reset signal, load the target file, connect to target, and set
@@ -213,3 +307,15 @@ extcoff: $(BUILD_DIR)/$(TARGET).elf
 	@$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
 	$(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
 
+bootloader:
+	make -C lib/lufa/Bootloaders/DFU/ clean
+	$(TMK_DIR)/make_dfu_header.sh $(ALL_CONFIGS)
+	make -C lib/lufa/Bootloaders/DFU/
+	printf "BootloaderDFU.hex copied to $(TARGET)_bootloader.hex\n"
+	cp lib/lufa/Bootloaders/DFU/BootloaderDFU.hex $(TARGET)_bootloader.hex
+
+production: $(BUILD_DIR)/$(TARGET).hex bootloader cpfirmware
+	@cat $(BUILD_DIR)/$(TARGET).hex | awk '/^:00000001FF/ == 0' > $(TARGET)_production.hex
+	@cat $(TARGET)_bootloader.hex >> $(TARGET)_production.hex
+	echo "File sizes:"
+	$(SIZE) $(TARGET).hex $(TARGET)_bootloader.hex $(TARGET)_production.hex