X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=tmk_core%2Favr.mk;h=5bfd5a9b0dcc4d888b8567858f196ac26c506f67;hb=f859375284f5a27f5b4f8cbe654e305ca3face17;hp=e11ba2e23e79a1a8f52cccf8e862b39b19d9e261;hpb=361810dca80b31b2ba236df8fdea48b89fedfd4d;p=qmk_firmware.git

diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk
index e11ba2e23..5bfd5a9b0 100644
--- a/tmk_core/avr.mk
+++ b/tmk_core/avr.mk
@@ -6,10 +6,10 @@ CC = avr-gcc
 OBJCOPY = avr-objcopy
 OBJDUMP = avr-objdump
 SIZE = avr-size
-AR = avr-ar rcs
+AR = avr-ar
 NM = avr-nm
 HEX = $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature
-EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) 
+EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT)
 BIN =
 
 COMMON_VPATH += $(DRIVER_PATH)/avr
@@ -124,24 +124,25 @@ qmk: $(BUILD_DIR)/$(TARGET).hex
 program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep check-size
 	$(PROGRAM_CMD)
 
-teensy: $(BUILD_DIR)/$(TARGET).hex check-size
+teensy: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
 	$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
-	
-BATCHISP ?= batchisp 
+
+BATCHISP ?= batchisp
 
 flip: $(BUILD_DIR)/$(TARGET).hex check-size
 	$(BATCHISP) -hardware usb -device $(MCU) -operation erase f
 	$(BATCHISP) -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
 	$(BATCHISP) -hardware usb -device $(MCU) -operation start reset 0
-	
+
 DFU_PROGRAMMER ?= dfu-programmer
+GREP ?= grep
 
 dfu: $(BUILD_DIR)/$(TARGET).hex cpfirmware check-size
 	until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\
 		echo "Error: Bootloader not found. Trying again in 5s." ;\
 		sleep 5 ;\
 	done
-	if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\
+	if $(DFU_PROGRAMMER) --version 2>&1 | $(GREP) -q 0.7 ; then\
 		$(DFU_PROGRAMMER) $(MCU) erase --force;\
 	else\
 		$(DFU_PROGRAMMER) $(MCU) erase;\
@@ -161,31 +162,92 @@ flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
 	$(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
 
 dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
-	if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\
+	if $(DFU_PROGRAMMER) --version 2>&1 | $(GREP) -q 0.7 ; then\
 		$(DFU_PROGRAMMER) $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep;\
 	else\
 		$(DFU_PROGRAMMER) $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep;\
 	fi
 	$(DFU_PROGRAMMER) $(MCU) reset
 
-avrdude: $(BUILD_DIR)/$(TARGET).hex check-size
-	if grep -q -s Microsoft /proc/version; then \
+dfu-split-left: $(BUILD_DIR)/$(TARGET).hex cpfirmware check-size
+	until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\
+		echo "Error: Bootloader not found. Trying again in 5s." ;\
+		sleep 5 ;\
+	done
+	if $(DFU_PROGRAMMER) --version 2>&1 | $(GREP) -q 0.7 ; then\
+		$(DFU_PROGRAMMER) $(MCU) erase --force;\
+		$(DFU_PROGRAMMER) $(MCU) flash --eeprom $(QUANTUM_PATH)/split_common/eeprom-lefthand.eep;\
+	else\
+		$(DFU_PROGRAMMER) $(MCU) erase;\
+		$(DFU_PROGRAMMER) $(MCU) flash-eeprom $(QUANTUM_PATH)/split_common/eeprom-lefthand.eep;\
+	fi
+	$(DFU_PROGRAMMER) $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
+	$(DFU_PROGRAMMER) $(MCU) reset
+
+dfu-split-right: $(BUILD_DIR)/$(TARGET).hex cpfirmware check-size
+	until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\
+		echo "Error: Bootloader not found. Trying again in 5s." ;\
+		sleep 5 ;\
+	done
+	if $(DFU_PROGRAMMER) --version 2>&1 | $(GREP) -q 0.7 ; then\
+		$(DFU_PROGRAMMER) $(MCU) erase --force;\
+		$(DFU_PROGRAMMER) $(MCU) flash --eeprom $(QUANTUM_PATH)/split_common/eeprom-righthand.eep;\
+	else\
+		$(DFU_PROGRAMMER) $(MCU) erase;\
+		$(DFU_PROGRAMMER) $(MCU) flash-eeprom $(QUANTUM_PATH)/split_common/eeprom-righthand.eep;\
+	fi
+	$(DFU_PROGRAMMER) $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
+	$(DFU_PROGRAMMER) $(MCU) reset
+
+define EXEC_AVRDUDE
+	USB= ;\
+	if $(GREP) -q -s Microsoft /proc/version; then \
 		echo 'ERROR: AVR flashing cannot be automated within the Windows Subsystem for Linux (WSL) currently. Instead, take the .hex file generated and flash it using AVRDUDE, AVRDUDESS, or XLoader.'; \
 	else \
+		printf "Detecting USB port, reset your controller now."; \
 		ls /dev/tty* > /tmp/1; \
-		echo -e "Detecting USB port, reset your controller now.\c"; \
 		while [ -z $$USB ]; do \
-			echo -e ".\c"; \
 			sleep 0.5; \
+			printf "."; \
 			ls /dev/tty* > /tmp/2; \
-			USB=`comm -13 /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
+			USB=`comm -13 /tmp/1 /tmp/2 | $(GREP) -o '/dev/tty.*'`; \
 			mv /tmp/2 /tmp/1; \
 		done; \
 		echo ""; \
-		echo "Detected controller on USB port at $$USB"; \
-		sleep 1; \
-		avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex; \
+		echo "Device $$USB has appeared; assuming it is the controller."; \
+		if $(GREP) -q -s 'MINGW\|MSYS' /proc/version; then \
+			USB=`echo "$$USB" | perl -pne 's/\/dev\/ttyS(\d+)/COM.($$1+1)/e'`; \
+			echo "Remapped MSYS2 USB port to $$USB"; \
+			sleep 1; \
+		else \
+			printf "Waiting for $$USB to become writable."; \
+			while [ ! -w "$$USB" ]; do sleep 0.5; printf "."; done; echo ""; \
+		fi; \
+		if [ -z "$(1)" ]; then \
+			avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex; \
+		else \
+			avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex -U eeprom:w:$(QUANTUM_PATH)/split_common/$(1); \
+		fi \
 	fi
+endef
+
+avrdude: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+	$(call EXEC_AVRDUDE)
+
+avrdude-loop: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+	while true; do \
+		$(call EXEC_AVRDUDE) ; \
+	done
+
+avrdude-split-left: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+	$(call EXEC_AVRDUDE,eeprom-lefthand.eep)
+
+avrdude-split-right: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+	$(call EXEC_AVRDUDE,eeprom-righthand.eep)
+
+usbasp: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+	avrdude -p $(MCU) -c usbasp -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
 
 # Convert hex to bin.
 bin: $(BUILD_DIR)/$(TARGET).hex
@@ -194,7 +256,7 @@ bin: $(BUILD_DIR)/$(TARGET).hex
 
 # copy bin to FLASH.bin
 flashbin: bin
-	$(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin; 
+	$(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin;
 
 # Generate avr-gdb config/init file which does the following:
 #     define the reset signal, load the target file, connect to target, and set
@@ -245,23 +307,19 @@ extcoff: $(BUILD_DIR)/$(TARGET).elf
 	@$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
 	$(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
 
-bootloader: 
+bootloader:
 	make -C lib/lufa/Bootloaders/DFU/ clean
-	echo "#ifndef QMK_KEYBOARD\n#define QMK_KEYBOARD\n" > lib/lufa/Bootloaders/DFU/Keyboard.h
-	echo `grep "MANUFACTURER" $(ALL_CONFIGS) -h | tail -1` >> lib/lufa/Bootloaders/DFU/Keyboard.h
-	echo `grep "PRODUCT" $(ALL_CONFIGS) -h | tail -1` Bootloader >> lib/lufa/Bootloaders/DFU/Keyboard.h
-	echo `grep "QMK_ESC_OUTPUT" $(ALL_CONFIGS) -h | tail -1` >> lib/lufa/Bootloaders/DFU/Keyboard.h
-	echo `grep "QMK_ESC_INPUT" $(ALL_CONFIGS) -h | tail -1` >> lib/lufa/Bootloaders/DFU/Keyboard.h
-	echo `grep "QMK_LED" $(ALL_CONFIGS) -h | tail -1` >> lib/lufa/Bootloaders/DFU/Keyboard.h
-	echo `grep "QMK_SPEAKER" $(ALL_CONFIGS) -h | tail -1` >> lib/lufa/Bootloaders/DFU/Keyboard.h
-	echo "\n#endif" >> lib/lufa/Bootloaders/DFU/Keyboard.h
-	make -C lib/lufa/Bootloaders/DFU/
-	echo "BootloaderDFU.hex copied to $(TARGET)_bootloader.hex"
+	$(TMK_DIR)/make_dfu_header.sh $(ALL_CONFIGS)
+	$(eval MAX_SIZE=$(shell n=`$(CC) -E -mmcu=$(MCU) $(CFLAGS) $(OPT_DEFS) tmk_core/common/avr/bootloader_size.c 2> /dev/null | sed -ne '/^#/n;/^AVR_SIZE:/,$${s/^AVR_SIZE: //;p;}'` && echo $$(($$n)) || echo 0))
+	$(eval PROGRAM_SIZE_KB=$(shell n=`expr $(MAX_SIZE) / 1024` && echo $$(($$n)) || echo 0))
+	$(eval BOOT_SECTION_SIZE_KB=$(shell n=`expr  $(BOOTLOADER_SIZE) / 1024` && echo $$(($$n)) || echo 0))
+	$(eval FLASH_SIZE_KB=$(shell n=`expr $(PROGRAM_SIZE_KB) + $(BOOT_SECTION_SIZE_KB)` && echo $$(($$n)) || echo 0))
+	make -C lib/lufa/Bootloaders/DFU/ MCU=$(MCU) ARCH=$(ARCH) F_CPU=$(F_CPU) FLASH_SIZE_KB=$(FLASH_SIZE_KB) BOOT_SECTION_SIZE_KB=$(BOOT_SECTION_SIZE_KB)
+	printf "BootloaderDFU.hex copied to $(TARGET)_bootloader.hex\n"
 	cp lib/lufa/Bootloaders/DFU/BootloaderDFU.hex $(TARGET)_bootloader.hex
 
-production: $(BUILD_DIR)/$(TARGET).hex bootloader
+production: $(BUILD_DIR)/$(TARGET).hex bootloader cpfirmware
 	@cat $(BUILD_DIR)/$(TARGET).hex | awk '/^:00000001FF/ == 0' > $(TARGET)_production.hex
 	@cat $(TARGET)_bootloader.hex >> $(TARGET)_production.hex
 	echo "File sizes:"
 	$(SIZE) $(TARGET).hex $(TARGET)_bootloader.hex $(TARGET)_production.hex
-