X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=readme.md;h=a92ae4c1dc0e9c32052c5dcaac4843df0a0e5496;hb=fe001d46fd06924bb81fe8d506f5be8894db3df0;hp=8615b48d5542b433bc158419072134e51319e30e;hpb=ea472fb018b0362aa6e4f9f368fc7b1e09c1021d;p=qmk_firmware.git diff --git a/readme.md b/readme.md index 8615b48d5..a92ae4c1d 100644 --- a/readme.md +++ b/readme.md @@ -911,7 +911,33 @@ In `quantum/keymap_extras/`, you'll see various language files - these work the ## Unicode support -You can currently send 4 hex digits with your OS-specific modifier key (RALT for OSX with the "Unicode Hex Input" layout, see [this article](http://www.poynton.com/notes/misc/mac-unicode-hex-input.html) to learn more) - this is currently limited to supporting one OS at a time, and requires a recompile for switching. 8 digit hex codes are being worked on. The keycode function is `UC(n)`, where *n* is a 4 digit hexidecimal. Enable from the Makefile. +There are three Unicode keymap definition method available in QMK: + +### UNICODE_ENABLE + +Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in +keymap file, where *n* is a 4 digit hexadecimal. + +### UNICODEMAP_ENABLE + +Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping +table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. +The keycode function is `X(n)` where *n* is the array index of the mapping +table. + +### UCIS_ENABLE + +TBD + +Unicode input in QMK works by inputing a sequence of characters to the OS, +sort of like macro. Unfortunately, each OS has different ideas on how Unicode is inputted. + +This is the current list of Unicode input method in QMK: + +* UC_OSX: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex. +* UC_LNX: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else. +* UC_WIN: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead. +* UC_WINC: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows. ## Backlight Breathing @@ -1136,12 +1162,12 @@ For this mod, you need an unused pin wiring to DI of WS2812 strip. After wiring RGBLIGHT_ENABLE = yes -In order to use the underglow timer functions, you need to have `#define RGBLIGHT_TIMER` in your `config.h`, and have audio disabled (`AUDIO_ENABLE = no` in your Makefile). +In order to use the underglow animation functions, you need to have `#define RGBLIGHT_ANIMATIONS` in your `config.h`. Please add the following options into your config.h, and set them up according your hardware configuration. These settings are for the `F4` pin by default: #define RGB_DI_PIN F4 // The pin your RGB strip is wired to - #define RGBLIGHT_TIMER // Require for fancier stuff (not compatible with audio) + #define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio) #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 @@ -1157,6 +1183,135 @@ The firmware supports 5 different light effects, and the color (hue, saturation, Please note the USB port can only supply a limited amount of power to the keyboard (500mA by standard, however, modern computer and most usb hubs can provide 700+mA.). According to the data of NeoPixel from Adafruit, 30 WS2812 LEDs require a 5V 1A power supply, LEDs used in this mod should not more than 20. +## PS/2 Mouse Support + +Its possible to hook up a PS/2 mouse (for example touchpads or trackpoints) to your keyboard as a composite device. + +Then, decide whether to use USART (best), interrupts (better) or busywait (not recommended), and enable the relevant option. + +### Busywait version + +Note: This is not recommended, you may encounter jerky movement or unsent inputs. Please use interrupt or USART version if possible. + +In rules.mk: + +``` +PS2_MOUSE_ENABLE = yes +PS2_USE_BUSYWAIT = yes +``` + +In your keyboard config.h: + +``` +#ifdef PS2_USE_BUSYWAIT +# define PS2_CLOCK_PORT PORTD +# define PS2_CLOCK_PIN PIND +# define PS2_CLOCK_DDR DDRD +# define PS2_CLOCK_BIT 1 +# define PS2_DATA_PORT PORTD +# define PS2_DATA_PIN PIND +# define PS2_DATA_DDR DDRD +# define PS2_DATA_BIT 2 +#endif +``` + +### Interrupt version + +The following example uses D2 for clock and D5 for data. You can use any INT or PCINT pin for clock, and any pin for data. + +In rules.mk: + +``` +PS2_MOUSE_ENABLE = yes +PS2_USE_INT = yes +``` + +In your keyboard config.h: + +``` +#ifdef PS2_USE_INT +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 2 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 5 + +#define PS2_INT_INIT() do { \ + EICRA |= ((1<