X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=keyboards%2Fxd75%2Freadme.md;h=5f4d2e85ffe46686bcabea771162dda5fc00162b;hb=137456e5b1fa5d8bc88e6775a496013dec530037;hp=0bc82be91e07f12c20d5cc02b8ba1a2db2e1a21f;hpb=81d7e7d4c8b99e032ce9423da56dba46f8bce18f;p=qmk_firmware.git

diff --git a/keyboards/xd75/readme.md b/keyboards/xd75/readme.md
index 0bc82be91..5f4d2e85f 100644
--- a/keyboards/xd75/readme.md
+++ b/keyboards/xd75/readme.md
@@ -9,22 +9,39 @@ For more info on this firmware (and how to make it your own), head over to [qmk.
 
 ## Building
 
-Download or clone the whole firmware and navigate to the keyboards/xd75 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
-
-Depending on which keymap you would like to use, you will have to compile slightly differently.
+Download or clone the whole firmware and navigate to the
+keyboards/xd75 folder. Once your dev env is setup, you'll be able to
+type `make` to generate your .hex - you can then use the Teensy Loader
+to install the resulting .hex file, or have the `make` process install
+it using DFU.
 
 ### Default
 
-To build with the default keymap, simply run `make default`.
+To build with the default keymap, simply run `make xd75:default` from the root directory (i.e. two levels above this file), and to install via DFU, `make xd75:default:dfu`, also from the root directory.
+
+Note that DFU is likely to require root permissions, so installing the
+firmware likely requires a command line like:
+
+```
+$ sudo make xd75:default:dfu
+```
 
 ### Other Keymaps
 
-The "default" keymap included is basically the OLKB Atomic keymap with a few buttons added for RGB underglow control. This should be usable as a starting point, but most people will be best served creating their own keymap and flashing it - more info on creating your own keymap is available in [the official QMK documentation](https://docs.qmk.fm).
+The "default" keymap included is basically the OLKB Atomic keymap with
+a few buttons added for RGB underglow control. This should be usable
+as a starting point, but most people will be best served creating
+their own keymap and flashing it - more info on creating your own
+keymap is available in [the official QMK
+documentation](https://docs.qmk.fm).
+
+Keymaps follow the format **__\<name\>.c__** and are stored in
+subdirectories under `keyboards/xd75/keymaps`
 
-To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+To build the firmware binary hex file for a specific keymap, and
+install it, using DFU, just do `make` with a keymap like this:
 
 ```
-$ make [default|jack|<name>]
+$ make xd75:[default|<name>]
 ```
 
-Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.