X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=keyboards%2Ftada68%2Freadme.md;h=a18758ac944911de8129e18c6f9f6b6d11e0bbaf;hb=137456e5b1fa5d8bc88e6775a496013dec530037;hp=dbe2fdca1b00d09d26300536012afefb1856d3dd;hpb=3fdc45b4e9581c823ac09545241241e0c6d3f313;p=qmk_firmware.git

diff --git a/keyboards/tada68/readme.md b/keyboards/tada68/readme.md
old mode 100644
new mode 100755
index dbe2fdca1..a18758ac9
--- a/keyboards/tada68/readme.md
+++ b/keyboards/tada68/readme.md
@@ -1,15 +1,31 @@
-TADA68 keyboard firmware
-========================
+TADA68
+======
 
-1) from the keyboards/tada68 directory run:
+A compact 65% keyboard.
+
+Keyboard Maintainer: QMK Community
+Hardware Supported: TADA68 PCB
+Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/products/tada68-mechanical-keyboard-gateron-swtich-65-layout-dye-sub-keycaps-cherry-profils?variant=34710238797) [kbdist](http://www.kbdist.com/shop/saber-68)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make tada68:default:bin
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+## Flashing Instructions
+
+*Read all the instructions, there are a few warnings of things to avoid doing to avoid bricking your Tada68. _It is much too easy to do!  _
+
+1) from the `qmk_firmware\` directory run:
 ```
-$ make flashbin
+$ make tada68:default:flashbin
 ```
 
-2) hit the reset button on the TADA, the lights will start flashing.
+2) Connect your keyboard to Windows computer, hit the reset button on the TADA, the lights will start flashing.
 
 3) You'll see a new drive on your computer called TADA68. Backup the original factory `FLASH.BIN` file thats inside it.
 
 4) Delete `FLASH.BIN` from the TADA drive and copy `tada68_default.bin` that was generated at the root of the qmk directory into the TADA drive.
 
-5) Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
\ No newline at end of file
+5) *Do not eject the USB device.* Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!