X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=keyboards%2Fsatan%2Freadme.md;h=7eb272cf304bc87a52583131be7de5b8db9cd4a0;hb=d686c0ea43d6a9db7768da64ee54c3ba25c018f7;hp=aa301f020c818eaca9f879d61a9555e68e96fc98;hpb=4059a16118e3abbc9eab2241693c60a1f19811b5;p=qmk_firmware.git

diff --git a/keyboards/satan/readme.md b/keyboards/satan/readme.md
index aa301f020..7eb272cf3 100644
--- a/keyboards/satan/readme.md
+++ b/keyboards/satan/readme.md
@@ -1,4 +1,33 @@
-Clueboard keyboard firmware
-======================
+# Satan GH60
 
-TODO: to be updated.
+A clone of the GH60 60% keyboard, with full backlighting support.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: Satan GH60 PCB  
+Hardware Availability: https://www.1upkeyboards.com/shop/controllers/gh60-satan-pcb/
+
+Make example for this keyboard (after setting up your build environment):
+
+    make satan:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## RGB Underglow (WS2812B LED Strip)
+
+This board also supports underglow with a slight mod.
+
+Connect the DIN pad of the LED strip to PE2 on the ATmega32U4, like so:
+
+![controller](https://i.imgur.com/9vyRBoT.jpg)
+
+Then connect VCC and GND to pins 1 and 6 at the bottom of the PCB:
+
+![power](https://i.imgur.com/pHMZHLP.jpg)
+
+## ISP Header
+
+If you want to flash another bootloader (such as QMK-DFU), or can't get into the bootloader in the first place, the row of pins at the bottom can be used to ISP flash the board:
+
+| 1 |  2 | 3 |  4 |   5 | 6 |  7 |
+|---|----|---|----|-----|---|----|
+|VCC|MISO|SCK|MOSI|RESET|GND|*NC*|