X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=keyboards%2Frama%2Fm6_b%2Fm6_b.c;h=581b31d753d95a21789bd75577044d7ca4f620ca;hb=2dea540afbfcffaea82f70b6642c39aedb9e3b5b;hp=e7cd2f62872abd2210af90315a29dc4390f3a7f6;hpb=caa293a8f77447891b02d5f8c91b209f9a082cc9;p=qmk_firmware.git diff --git a/keyboards/rama/m6_b/m6_b.c b/keyboards/rama/m6_b/m6_b.c index e7cd2f628..581b31d75 100644 --- a/keyboards/rama/m6_b/m6_b.c +++ b/keyboards/rama/m6_b/m6_b.c @@ -13,218 +13,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "m6_b.h" -#include "m6_b_api.h" - -// Check that no backlight functions are called -#if RGB_BACKLIGHT_ENABLED -#include "rgb_backlight.h" -#endif // RGB_BACKLIGHT_ENABLED - -#include "raw_hid.h" -#include "dynamic_keymap.h" -#include "timer.h" -#include "tmk_core/common/eeprom.h" - -bool eeprom_is_valid(void) -{ - return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC && - eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION); -} - -void eeprom_set_valid(bool valid) -{ - eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF); - eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF); -} - -void eeprom_reset(void) -{ - // Set the keyboard-specific EEPROM state as invalid. - eeprom_set_valid(false); - // Set the TMK/QMK EEPROM state as invalid. - eeconfig_disable(); -} - -#ifdef RAW_ENABLE - -void raw_hid_receive( uint8_t *data, uint8_t length ) -{ - uint8_t *command_id = &(data[0]); - uint8_t *command_data = &(data[1]); - switch ( *command_id ) - { - case id_get_protocol_version: - { - command_data[0] = PROTOCOL_VERSION >> 8; - command_data[1] = PROTOCOL_VERSION & 0xFF; - break; - } - case id_get_keyboard_value: - { - if ( command_data[0] == id_uptime ) - { - uint32_t value = timer_read32(); - command_data[1] = (value >> 24 ) & 0xFF; - command_data[2] = (value >> 16 ) & 0xFF; - command_data[3] = (value >> 8 ) & 0xFF; - command_data[4] = value & 0xFF; - } - else - { - *command_id = id_unhandled; - } - break; - } -#ifdef DYNAMIC_KEYMAP_ENABLE - case id_dynamic_keymap_get_keycode: - { - uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] ); - command_data[3] = keycode >> 8; - command_data[4] = keycode & 0xFF; - break; - } - case id_dynamic_keymap_set_keycode: - { - dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] ); - break; - } - case id_dynamic_keymap_reset: - { - dynamic_keymap_reset(); - break; - } -#endif // DYNAMIC_KEYMAP_ENABLE -#if RGB_BACKLIGHT_ENABLED - case id_backlight_config_set_value: - { - //backlight_config_set_value(command_data); - break; - } - case id_backlight_config_get_value: - { - //backlight_config_get_value(command_data); - break; - } - case id_backlight_config_save: - { - //backlight_config_save(); - break; - } -#endif // RGB_BACKLIGHT_ENABLED - case id_eeprom_reset: - { - eeprom_reset(); - break; - } - case id_bootloader_jump: - { - // Need to send data back before the jump - // Informs host that the command is handled - raw_hid_send( data, length ); - // Give host time to read it - wait_ms(100); - bootloader_jump(); - break; - } - default: - { - // Unhandled message. - *command_id = id_unhandled; - break; - } - } - - // Return same buffer with values changed - raw_hid_send( data, length ); - -} - +#ifndef RGB_BACKLIGHT_M6_B +#error RGB_BACKLIGHT_M6_B not defined, you done goofed somehao, brah #endif - -void main_init(void) -{ - // If the EEPROM has the magic, the data is good. - // OK to load from EEPROM. - if (eeprom_is_valid()) { -#if RGB_BACKLIGHT_ENABLED - //backlight_config_load(); -#endif // RGB_BACKLIGHT_ENABLED - } else { -#if RGB_BACKLIGHT_ENABLED - // If the EEPROM has not been saved before, or is out of date, - // save the default values to the EEPROM. Default values - // come from construction of the zeal_backlight_config instance. - //backlight_config_save(); -#endif // RGB_BACKLIGHT_ENABLED -#ifdef DYNAMIC_KEYMAP_ENABLE - // This resets the keymaps in EEPROM to what is in flash. - dynamic_keymap_reset(); -#endif - // Save the magic number last, in case saving was interrupted - eeprom_set_valid(true); - } -#if RGB_BACKLIGHT_ENABLED - // Initialize LED drivers for backlight. - backlight_init_drivers(); - - backlight_timer_init(); - backlight_timer_enable(); -#endif // RGB_BACKLIGHT_ENABLED -} - -void bootmagic_lite(void) -{ - // The lite version of TMK's bootmagic. - // 100% less potential for accidentally making the - // keyboard do stupid things. - - // We need multiple scans because debouncing can't be turned off. - matrix_scan(); - wait_ms(DEBOUNCING_DELAY); - wait_ms(DEBOUNCING_DELAY); - matrix_scan(); - - // If the Esc (matrix 0,0) is held down on power up, - // reset the EEPROM valid state and jump to bootloader. - if ( matrix_get_row(0) & (1<<0) ) { - eeprom_reset(); - bootloader_jump(); - } -} - -void matrix_init_kb(void) { - bootmagic_lite(); - main_init(); - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#if RGB_BACKLIGHT_ENABLED - // This only updates the LED driver buffers if something has changed. - backlight_update_pwm_buffers(); -#endif // BACKLIGHT_ENABLED - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - led_set_user(usb_led); -} - -void suspend_power_down_kb(void) -{ -#if RGB_BACKLIGHT_ENABLED - //backlight_set_suspend_state(true); -#endif // BACKLIGHT_ENABLED -} - -void suspend_wakeup_init_kb(void) -{ -#if RGB_BACKLIGHT_ENABLED - //backlight_set_suspend_state(false); -#endif // BACKLIGHT_ENABLED -}