X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=keyboards%2Fpreonic%2Frev3%2Frules.mk;h=0c171b2fb09a593536495b17ee3cae460518858b;hb=8da9d3330e7904c57b240cfb1b2d3312ad81ccf9;hp=7c40d514d26985821955050f12c4d2ac2f466e2e;hpb=0772b4932c9ab2734e51cdff58a566bf6b3bc922;p=qmk_firmware.git

diff --git a/keyboards/preonic/rev3/rules.mk b/keyboards/preonic/rev3/rules.mk
index 7c40d514d..0c171b2fb 100644
--- a/keyboards/preonic/rev3/rules.mk
+++ b/keyboards/preonic/rev3/rules.mk
@@ -1,56 +1,24 @@
 # project specific files
-SRC =	matrix.c
+SRC = matrix.c
 LAYOUTS += ortho_5x12
 
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
 # Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+MCU  = STM32F303
 
 # Build Options
 #   comment out to disable the options.
 #
 BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes  # Console for debug
 COMMAND_ENABLE = yes    # Commands for debug and configuration
 #SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	    # USB Nkey Rollover
+NKRO_ENABLE = yes     # USB Nkey Rollover
 CUSTOM_MATRIX = yes # Custom matrix file
 AUDIO_ENABLE = yes
 RGBLIGHT_ENABLE = no
 # SERIAL_LINK_ENABLE = yes
+ENCODER_ENABLE = yes