X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=keyboards%2Fmaxipad%2Freadme.md;h=b62afdf34315f1836d5bdc1c2eae9e64b5a9148d;hb=24df54b80794144907db94c2cb5ceca928700e2d;hp=861ea2b0782eaaa38579d55f932a616d6083483b;hpb=8f8d10475956a17953f6db4db3f3b50bd795c0d8;p=qmk_firmware.git diff --git a/keyboards/maxipad/readme.md b/keyboards/maxipad/readme.md index 861ea2b07..b62afdf34 100644 --- a/keyboards/maxipad/readme.md +++ b/keyboards/maxipad/readme.md @@ -1,4 +1,4 @@ -Maxipad keyboard firmware +# Maxipad ## Quantum MK Firmware @@ -7,23 +7,11 @@ For the full Quantum feature list, see [the parent readme.md](/readme.md). If you are using a pro micro then make sure to enable USE_PRO_MICRO in the makefile Change the config.h pinout to match your mcu!! -Download or clone the whole firmware and navigate to the keyboards/maxipad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default -To build with the default keymap, simply run `make`. - +To build with the default keymap, simply run `make maxipad:default`. ### Other Keymaps Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. - - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|] -``` - -Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder.