X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=keyboards%2Finfinity60%2Fled_controller.h;h=e4b47176464e56e6ab7ac1674941bc44d7ed8f42;hb=b1935c5e0dcd1adf32df652c65deffad35cd7405;hp=0f2d62d3da6f13432f7b2295e51756cea90d538d;hpb=1b1adf35bb746a875c2b846e1b1b405075c94847;p=qmk_firmware.git

diff --git a/keyboards/infinity60/led_controller.h b/keyboards/infinity60/led_controller.h
index 0f2d62d3d..e4b471764 100644
--- a/keyboards/infinity60/led_controller.h
+++ b/keyboards/infinity60/led_controller.h
@@ -1,5 +1,6 @@
 /*
 Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org>
+Copyright 2017 jpetermans <tibcmhhm@gmail.com>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -34,7 +35,6 @@ void led_controller_init(void);
 
 #define CAPS_LOCK_LED_ADDRESS 46 //pin matrix location
 #define NUM_LOCK_LED_ADDRESS 85
-#define BACKLIGHT_OFF_LOCK_LED_OFF 0 //set to 0 to show lock leds even if backlight off
 
 /* =============================
  * IS31 chip related definitions
@@ -59,7 +59,7 @@ void led_controller_init(void);
 
 #define IS31_REG_DISPLAYOPT 0x05
 #define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
+#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x08
 // D2:D0 bits blink period time (*0.27s)
 
 #define IS31_REG_AUDIOSYNC 0x06
@@ -76,7 +76,8 @@ void led_controller_init(void);
 // D2:D0 extinguish time (3.5ms*2^i)
 
 #define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_ON 0x1
+#define IS31_REG_SHUTDOWN_OFF 0x1
+#define IS31_REG_SHUTDOWN_ON 0x0
 
 #define IS31_REG_AGCCTRL 0x0B
 #define IS31_REG_ADCRATE 0x0C
@@ -87,27 +88,33 @@ void led_controller_init(void);
 #define IS31_TIMEOUT 10000 // needs to be long enough to write a whole page
 
 /* ========================================
- * LED Thread related functions/definitions
+ * LED Thread related items
  * ========================================*/
 
 extern mailbox_t led_mailbox;
 
 void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action);
-void set_lock_leds (uint8_t lock_type, uint8_t led_on);
-void write_led_page (uint8_t page, const uint8_t *led_array, uint8_t led_count);
+void set_lock_leds (uint8_t led_addr, uint8_t led_action, uint8_t page);
+void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte);
+void write_led_page (uint8_t page, uint8_t *led_array, uint8_t led_count);
 
 // constants for signaling the LED controller thread
 enum led_msg_t {
     KEY_LIGHT,
+    SET_FULL_ROW,
     OFF_LED,
     ON_LED,
     TOGGLE_LED,
+    BLINK_OFF_LED,
+    BLINK_ON_LED,
+    BLINK_TOGGLE_LED,
     TOGGLE_ALL,
     TOGGLE_BACKLIGHT,
-    TOGGLE_LAYER_LEDS,
+    DISPLAY_PAGE,
+    RESET_PAGE,
     TOGGLE_NUM_LOCK,
     TOGGLE_CAPS_LOCK,
-    MODE_BREATH,
+    TOGGLE_BREATH,
     STEP_BRIGHTNESS
 };