X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=keyboards%2Fgonnerd%2Freadme.md;h=223fdf3d3ff92c73f36c79f78112b7cf6f44d38b;hb=3538955778c253e68779605cc67c27e15d195729;hp=807df308a52efc374291b426620c03be73818570;hpb=e51001efcc3ff8b64f8264e8bd4c2dbea15f3364;p=qmk_firmware.git

diff --git a/keyboards/gonnerd/readme.md b/keyboards/gonnerd/readme.md
index 807df308a..223fdf3d3 100644
--- a/keyboards/gonnerd/readme.md
+++ b/keyboards/gonnerd/readme.md
@@ -1,5 +1,17 @@
-GON NerD keyboard firmware
-======================
+GON NerD
+========
+
+A Korean Custom TKL.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: GON NerD TKL PCB  
+Hardware Availability: [gonskeyboardworks.com](http://www.gonskeyboardworks.com/pcbs-and-controllers/60-nerd-tkl-ver20-pcb.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make gonnerd:default
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
 
 ## Changing Bootloader
 
@@ -14,25 +26,3 @@ not work anymore. You will lose your warranty and official support from GON!_
 ## Reset button
 
 To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins.
-
-## Building
-
-Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
-
-Depending on which keymap you would like to use, you will have to compile slightly differently.
-
-### Default
-
-To build with the default keymap, simply run `make default`.
-
-### Other Keymaps
-
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
-
-To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
-
-```
-$ make [default|jack|<name>]
-```
-
-Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.