X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=keyboards%2Fergodox_ez%2Fconfig.h;h=ee768853a981c08b277a28545702bea8dfbf0e6c;hb=930e1dfc4c4d366fd85c6ce0652a071beaab91c0;hp=bf3ebceb11c2b25ad3fa37703d00a191bce4551c;hpb=847ade44fc648f124801dfffc9dcd69442db6a91;p=qmk_firmware.git

diff --git a/keyboards/ergodox_ez/config.h b/keyboards/ergodox_ez/config.h
index bf3ebceb1..ee768853a 100644
--- a/keyboards/ergodox_ez/config.h
+++ b/keyboards/ergodox_ez/config.h
@@ -31,6 +31,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* key matrix size */
 #define MATRIX_ROWS 14
+#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
 #define MATRIX_COLS 6
 
 #define MOUSEKEY_INTERVAL       20
@@ -61,8 +62,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* number of backlight levels */
 #define BACKLIGHT_LEVELS 3
 
+#ifndef LED_BRIGHTNESS_LO
 #define LED_BRIGHTNESS_LO       15
+#endif
+#ifndef LED_BRIGHTNESS_HI
 #define LED_BRIGHTNESS_HI       255
+#endif
+#define LED_BRIGHTNESS_DEFAULT (LED_BRIGHTNESS_HI)
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D7
@@ -75,18 +81,36 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* fix space cadet rollover issue */
 #define DISABLE_SPACE_CADET_ROLLOVER
 
-// #define RGB_MIDI
 #define RGBW_BB_TWI
 
 #define RGBW 1
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    15
-
-#define PREVENT_STUCK_MODIFIERS
+/*
+ * The debounce filtering reports a key/switch change directly,
+ * without any extra delay. After that the debounce logic will filter
+ * all further changes, until the key/switch reports the same state for
+ * the given count of scans.
+ * So a perfect switch will get a short debounce period and
+ * a bad key will get a much longer debounce period.
+ * The result is an adaptive debouncing period for each switch.
+ *
+ * If you don't define it here, the matrix code will default to
+ * 5, which is now closer to 10ms, but still plenty according to
+ * manufacturer specs.
+ */
+#define DEBOUNCE    10
 
 #define USB_MAX_POWER_CONSUMPTION 500
 
+// RGB backlight
+#define DRIVER_ADDR_1 0b1110100
+#define DRIVER_ADDR_2 0b1110111
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 24
+#define DRIVER_2_LED_TOTAL 24
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL
+#define RGB_MATRIX_SKIP_FRAMES 10
+
 // #define RGBLIGHT_COLOR_LAYER_0 0x00, 0x00, 0xFF
 /* #define RGBLIGHT_COLOR_LAYER_1 0x00, 0x00, 0xFF */
 /* #define RGBLIGHT_COLOR_LAYER_2 0xFF, 0x00, 0x00 */