X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=keyboard%2Fplanck%2Fplanck.c;h=446353dbf5f111fd9e7c8bf15f18ce573da0a7d5;hb=3f02637f4dd765803671c2611191beb096d60b36;hp=fe8731ec7b5486fef4c410e41ba70c404ce4fe5f;hpb=c9aec8bc246fe45a6486a5ef7a9ef1302e4e16ad;p=qmk_firmware.git diff --git a/keyboard/planck/planck.c b/keyboard/planck/planck.c index fe8731ec7..446353dbf 100644 --- a/keyboard/planck/planck.c +++ b/keyboard/planck/planck.c @@ -1,28 +1,29 @@ #include "planck.h" __attribute__ ((weak)) -void matrix_init_user(void) { +void matrix_init_user(void) {} -} +__attribute__ ((weak)) +void matrix_scan_user(void) {} __attribute__ ((weak)) -void matrix_scan_user(void) { +void process_action_user(keyrecord_t *record) {} -} +__attribute__ ((weak)) +void led_set_user(uint8_t usb_led) {} void matrix_init_kb(void) { - #ifdef BACKLIGHT_ENABLE - backlight_init_ports(); - #endif - - #ifdef RGBLIGHT_ENABLE - rgblight_init(); - #endif +#ifdef BACKLIGHT_ENABLE + backlight_init_ports(); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_init(); +#endif - // Turn status LED on - DDRE |= (1<<6); - PORTE |= (1<<6); + // Turn status LED on + DDRE |= (1<<6); + PORTE |= (1<<6); matrix_init_user(); } @@ -30,3 +31,274 @@ void matrix_init_kb(void) { void matrix_scan_kb(void) { matrix_scan_user(); } + +void process_action_kb(keyrecord_t *record) { + process_action_user(record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + +#ifdef BACKLIGHT_ENABLE +#define CHANNEL OCR1C +#define BREATHING_NO_HALT 0 +#define BREATHING_HALT_OFF 1 +#define BREATHING_HALT_ON 2 + +static uint8_t breath_intensity; +static uint8_t breath_speed; +static uint16_t breathing_index; +static uint8_t breathing_halt; + +void backlight_init_ports() +{ + + // Setup PB7 as output and output low. + DDRB |= (1<<7); + PORTB &= ~(1<<7); + + // Use full 16-bit resolution. + ICR1 = 0xFFFF; + + // I could write a wall of text here to explain... but TL;DW + // Go read the ATmega32u4 datasheet. + // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on + + // Pin PB7 = OCR1C (Timer 1, Channel C) + // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 + // (i.e. start high, go low when counter matches.) + // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0 + // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1 + + TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; + TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; + + backlight_init(); + breathing_defaults(); +} + +void backlight_set(uint8_t level) +{ + // Prevent backlight blink on lowest level + PORTB &= ~(_BV(PORTB7)); + + if ( level == 0 ) + { + // Turn off PWM control on PB7, revert to output low. + TCCR1A &= ~(_BV(COM1C1)); + CHANNEL = 0x0; + } + else if ( level == BACKLIGHT_LEVELS ) + { + // Turn on PWM control of PB7 + TCCR1A |= _BV(COM1C1); + // Set the brightness + CHANNEL = 0xFFFF; + } + else + { + // Turn on PWM control of PB7 + TCCR1A |= _BV(COM1C1); + // Set the brightness + CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2)); + } + breathing_intensity_default(); +} + + +void breathing_enable(void) +{ + if (get_backlight_level() == 0) + { + breathing_index = 0; + } + else + { + // Set breathing_index to be at the midpoint (brightest point) + breathing_index = 0x20 << breath_speed; + } + + breathing_halt = BREATHING_NO_HALT; + + // Enable breathing interrupt + TIMSK1 |= _BV(OCIE1A); +} + +void breathing_pulse(void) +{ + if (get_backlight_level() == 0) + { + breathing_index = 0; + } + else + { + // Set breathing_index to be at the midpoint + 1 (brightest point) + breathing_index = 0x21 << breath_speed; + } + + breathing_halt = BREATHING_HALT_ON; + + // Enable breathing interrupt + TIMSK1 |= _BV(OCIE1A); +} + +void breathing_disable(void) +{ + // Disable breathing interrupt + TIMSK1 &= ~_BV(OCIE1A); + backlight_set(get_backlight_level()); +} + +void breathing_self_disable(void) +{ + if (get_backlight_level() == 0) + { + breathing_halt = BREATHING_HALT_OFF; + } + else + { + breathing_halt = BREATHING_HALT_ON; + } + + //backlight_set(get_backlight_level()); +} + +void breathing_toggle(void) +{ + if (!is_breathing()) + { + if (get_backlight_level() == 0) + { + breathing_index = 0; + } + else + { + // Set breathing_index to be at the midpoint + 1 (brightest point) + breathing_index = 0x21 << breath_speed; + } + + breathing_halt = BREATHING_NO_HALT; + } + + // Toggle breathing interrupt + TIMSK1 ^= _BV(OCIE1A); + + // Restore backlight level + if (!is_breathing()) + { + backlight_set(get_backlight_level()); + } +} + +bool is_breathing(void) +{ + return (TIMSK1 && _BV(OCIE1A)); +} + +void breathing_intensity_default(void) +{ + //breath_intensity = (uint8_t)((uint16_t)100 * (uint16_t)get_backlight_level() / (uint16_t)BACKLIGHT_LEVELS); + breath_intensity = ((BACKLIGHT_LEVELS - get_backlight_level()) * ((BACKLIGHT_LEVELS + 1) / 2)); +} + +void breathing_intensity_set(uint8_t value) +{ + breath_intensity = value; +} + +void breathing_speed_default(void) +{ + breath_speed = 4; +} + +void breathing_speed_set(uint8_t value) +{ + bool is_breathing_now = is_breathing(); + uint8_t old_breath_speed = breath_speed; + + if (is_breathing_now) + { + // Disable breathing interrupt + TIMSK1 &= ~_BV(OCIE1A); + } + + breath_speed = value; + + if (is_breathing_now) + { + // Adjust index to account for new speed + breathing_index = (( (uint8_t)( (breathing_index) >> old_breath_speed ) ) & 0x3F) << breath_speed; + + // Enable breathing interrupt + TIMSK1 |= _BV(OCIE1A); + } + +} + +void breathing_speed_inc(uint8_t value) +{ + if ((uint16_t)(breath_speed - value) > 10 ) + { + breathing_speed_set(0); + } + else + { + breathing_speed_set(breath_speed - value); + } +} + +void breathing_speed_dec(uint8_t value) +{ + if ((uint16_t)(breath_speed + value) > 10 ) + { + breathing_speed_set(10); + } + else + { + breathing_speed_set(breath_speed + value); + } +} + +void breathing_defaults(void) +{ + breathing_intensity_default(); + breathing_speed_default(); + breathing_halt = BREATHING_NO_HALT; +} + +/* Breathing Sleep LED brighness(PWM On period) table + * (64[steps] * 4[duration]) / 64[PWM periods/s] = 4 second breath cycle + * + * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63 + * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i } + */ +static const uint8_t breathing_table[64] PROGMEM = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 4, 6, 10, + 15, 23, 32, 44, 58, 74, 93, 113, 135, 157, 179, 199, 218, 233, 245, 252, +255, 252, 245, 233, 218, 199, 179, 157, 135, 113, 93, 74, 58, 44, 32, 23, + 15, 10, 6, 4, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, +}; + +ISR(TIMER1_COMPA_vect) +{ + // CHANNEL = (pgm_read_byte(&breathing_table[ ( (uint8_t)( (breathing_index++) >> breath_speed ) ) & 0x3F ] )) * breath_intensity; + + + uint8_t local_index = ( (uint8_t)( (breathing_index++) >> breath_speed ) ) & 0x3F; + + if (((breathing_halt == BREATHING_HALT_ON) && (local_index == 0x20)) || ((breathing_halt == BREATHING_HALT_OFF) && (local_index == 0x3F))) + { + // Disable breathing interrupt + TIMSK1 &= ~_BV(OCIE1A); + } + + CHANNEL = (uint16_t)(((uint16_t)pgm_read_byte(&breathing_table[local_index]) * 257)) >> breath_intensity; + +} + + + +#endif \ No newline at end of file