X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=drivers%2Favr%2Fis31fl3731.c;h=70813464b2be3988258d120099b0b4c967a6e710;hb=6380f8319057d33bb6d07c66789867e49c634504;hp=13dfe6eaf615c0e6753f68897c43c269a05e512c;hpb=682555faac8a67deff5688b956165cd1c39389cb;p=qmk_firmware.git

diff --git a/drivers/avr/is31fl3731.c b/drivers/avr/is31fl3731.c
index 13dfe6eaf..70813464b 100644
--- a/drivers/avr/is31fl3731.c
+++ b/drivers/avr/is31fl3731.c
@@ -49,6 +49,14 @@
 #define ISSI_COMMANDREGISTER 0xFD
 #define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
 
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
 // Transfer buffer for TWITransmitData()
 uint8_t g_twi_transfer_buffer[20];
 
@@ -83,9 +91,14 @@ void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
 	g_twi_transfer_buffer[0] = reg;
 	g_twi_transfer_buffer[1] = data;
 
-	//Transmit data until succesful
-  //while(i2c_transmit(addr << 1, g_twi_transfer_buffer,2) != 0);
-  i2c_transmit(addr << 1, g_twi_transfer_buffer,2);
+  #if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
+        break;
+    }
+  #else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+  #endif
 }
 
 void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
@@ -96,22 +109,24 @@ void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
 	// g_twi_transfer_buffer[] is 20 bytes
 
 	// iterate over the pwm_buffer contents at 16 byte intervals
-	for ( int i = 0; i < 144; i += 16 )
-	{
+	for ( int i = 0; i < 144; i += 16 ) {
 		// set the first register, e.g. 0x24, 0x34, 0x44, etc.
 		g_twi_transfer_buffer[0] = 0x24 + i;
 		// copy the data from i to i+15
 		// device will auto-increment register for data after the first byte
 		// thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
-		for ( int j = 0; j < 16; j++ )
-		{
+		for ( int j = 0; j < 16; j++ ) {
 			g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
 		}
 
-		//Transmit buffer until succesful
-		//while(i2c_transmit(addr << 1, g_twi_transfer_buffer,17) != 0);
-    i2c_transmit(addr << 1, g_twi_transfer_buffer,17);
-
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
 	}
 }
 
@@ -168,6 +183,7 @@ void IS31FL3731_init( uint8_t addr )
 	// most usage after initialization is just writing PWM buffers in bank 0
 	// as there's not much point in double-buffering
 	IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
+
 }
 
 void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
@@ -220,7 +236,6 @@ void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, b
 
 	g_led_control_registers_update_required = true;
 
-
 }
 
 void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )