X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=docs%2Fporting_your_keyboard_to_qmk.md;h=3fa08830b2f09af2b39031422019c7711283bef2;hb=71d1c02a9b05c676e98d9e3115e96c01c498a058;hp=05787042fd76bb3c8abca1498b687c1948123084;hpb=03706de94621f42a469b0c3c4a4e570dc14666dc;p=qmk_firmware.git

diff --git a/docs/porting_your_keyboard_to_qmk.md b/docs/porting_your_keyboard_to_qmk.md
index 05787042f..3fa08830b 100644
--- a/docs/porting_your_keyboard_to_qmk.md
+++ b/docs/porting_your_keyboard_to_qmk.md
@@ -20,7 +20,7 @@ For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the
 
 `BACKLIGHT_LEVELS` is how many levels exist for your backlight - max is 15, and they are computed automatically from this number.
 
-## `/keyboards/<keyboard>/Makefile`
+## `/keyboards/<keyboard>/rules.mk`
 
 The values at the top likely won't need to be changed, since most boards use the `atmega32u4` chip. The `BOOTLOADER_SIZE` will need to be adjusted based on your MCU type. It's defaulted to the Teensy, since that's the most common controller. Below is quoted from the `Makefile`.
 
@@ -34,7 +34,7 @@ The values at the top likely won't need to be changed, since most boards use the
 OPT_DEFS += -DBOOTLOADER_SIZE=512
 ```
 
-At the bottom of the file, you'll find lots of features to turn on and off - all of these options should be set with `?=` to allow for the keymap overrides. `?=` only assigns if the variable was previously undefined. For the full documenation of these features, see the [Makefile options](#makefile-options).
+At the bottom of the file, you'll find lots of features to turn on and off - all of these options should be set with `?=` to allow for the keymap overrides. `?=` only assigns if the variable was previously undefined. For the full documenation of these features, see the [Makefile options](getting_started_make_guide.md#makefile-options).
 
 ## `/keyboards/<keyboard>/readme.md`
 
@@ -42,7 +42,7 @@ This is where you'll describe your keyboard - please write as much as you can ab
 
 ## `/keyboards/<keyboard>/<keyboard>.c`
 
-This is where all of the custom logic for your keyboard goes - you may not need to put anything in this file, since a lot of things are configured automatically. All of the `*_kb()` functions are defined here. If you modify them, remember to keep the calls to `*_user()`, or things in the keymaps might not work. You can read more about the functions [here](#custom-quantum-functions-for-keyboards-and-keymaps)
+This is where all of the custom logic for your keyboard goes - you may not need to put anything in this file, since a lot of things are configured automatically. All of the `*_kb()` functions are defined here. If you modify them, remember to keep the calls to `*_user()`, or things in the keymaps might not work. You can read more about the functions [here](custom_quantum_functions.md).
 
 ## `/keyboards/<keyboard>/<keyboard>.h`