X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=docs%2Fisp_flashing_guide.md;h=0f786c5141bf6f3dc0a7bed893c890aea03749b9;hb=6af77551c67c846b06c596cbd367d66c755f8051;hp=18f2147846b96f2aa35a5cb37a1214e0bcfef035;hpb=c9ba618654417ec115809a031d315f8327c79ad4;p=qmk_firmware.git

diff --git a/docs/isp_flashing_guide.md b/docs/isp_flashing_guide.md
index 18f214784..0f786c514 100644
--- a/docs/isp_flashing_guide.md
+++ b/docs/isp_flashing_guide.md
@@ -63,6 +63,7 @@ If you just want to get things back to normal, you can flash only a bootloader f
 
 * [`atmega32u4`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1_0_0.hex) - Most keyboards, Planck Rev 1-5, Preonic Rev 1-2
 * [`at90usb1286`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128x_1_0_1.hex) - Planck Light Rev 1
+* [`atmega32a`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32a_1_0_0.hex) - jj40
 
 If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU =` line will have the value you need. It may differ between different versions of the board.
 
@@ -113,6 +114,10 @@ Since our keyboard uses an `atmega32u4` (common), that is the chip we'll specify
 
     avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i
 
+If your board uses an `atmega32a` (e.g. on a jj40), the command is this (the extra code at the end sets the fuses correctly):
+
+	avrdude -c avrisp -P COM3 -p atmega32 -U flash:w:main.hex:i -U hfuse:w:0xD0:m -U lfuse:w:0x0F:m
+
 You should see a couple of progress bars, then you should see:
 
     avrdude: verifying ...