X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=docs%2Fconfig_options.md;h=afc29fae9c23d29c21a10f9afae108c3fa3c5c78;hb=ea7bb624de0b397c3055b9b879e0d5a9c0a237d6;hp=acc402665b75bc43746e3295b69d37cdeaf1692c;hpb=5226e4c79b3da327735f59344df7e402f254532d;p=qmk_firmware.git

diff --git a/docs/config_options.md b/docs/config_options.md
index acc402665..afc29fae9 100644
--- a/docs/config_options.md
+++ b/docs/config_options.md
@@ -89,6 +89,10 @@ This is a C header file that is one of the first things included, and will persi
   * tries to keep switch state consistent with keyboard LED state
 * `#define IS_COMMAND() ( keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) )`
   * key combination that allows the use of magic commands (useful for debugging)
+* `#define USB_MAX_POWER_CONSUMPTION`
+  * sets the maximum power (in mA) over USB for the device (default: 500)
+* `#define SCL_CLOCK 100000L`
+  * sets the SCL_CLOCK speed for split keyboards. The default is `100000L` but some boards can be set to `400000L`.
 
 ## Features That Can Be Disabled
 
@@ -121,21 +125,27 @@ If you define these options you will enable the associated feature, which may in
 ## Behaviors That Can Be Configured
 
 * `#define TAPPING_TERM 200`
-  * how long before a tap becomes a hold
+  * how long before a tap becomes a hold, if set above 500, a key tapped during the tapping term will turn it into a hold too
 * `#define RETRO_TAPPING`
   * tap anyway, even after TAPPING_TERM, if there was no other key interruption between press and release
+  * See [Retro Tapping](feature_advanced_keycodes.md#retro-tapping) for details
 * `#define TAPPING_TOGGLE 2`
   * how many taps before triggering the toggle
 * `#define PERMISSIVE_HOLD`
   * makes tap and hold keys work better for fast typers who don't want tapping term set above 500
+  * See [Permissive Hold](feature_advanced_keycodes.md#permissive-hold) for details
+* `#define IGNORE_MOD_TAP_INTERRUPT`
+  * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold
+  * See [Mod tap interrupt](feature_advanced_keycodes.md#mod-tap-interrupt) for details
+* `#define TAPPING_FORCE_HOLD`
+  * makes it possible to use a dual role key as modifier shortly after having been tapped
+  * See [Hold after tap](feature_advanced_keycodes.md#hold-after-tap)
 * `#define LEADER_TIMEOUT 300`
   * how long before the leader key times out
 * `#define ONESHOT_TIMEOUT 300`
   * how long before oneshot times out
 * `#define ONESHOT_TAP_TOGGLE 2`
   * how many taps before oneshot toggle is triggered
-* `#define IGNORE_MOD_TAP_INTERRUPT`
-  * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold
 * `#define QMK_KEYS_PER_SCAN 4`
   * Allows sending more than one key per scan. By default, only one key event gets
     sent via `process_record()` per scan. This has little impact on most typing, but
@@ -171,6 +181,16 @@ If you define these options you will enable the associated feature, which may in
 * `#define MOUSEKEY_MAX_SPEED 7`
 * `#define MOUSEKEY_WHEEL_DELAY 0`
 
+## Split Keyboard Options
+
+Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk
+
+* `#define SPLIT_HAND_PIN B7`
+  * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace 'B7' with the pin you are using. This is optional and you can still use the EEHANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
+  
+* `#define USE_I2C`
+  * For using I2C instead of Serial (defaults to serial)
+
 # The `rules.mk` File
 
 This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.
@@ -224,3 +244,5 @@ Use these to enable or disable building certain features. The more you have enab
   * Unicode
 * `BLUETOOTH_ENABLE`
   * Enable Bluetooth with the Adafruit EZ-Key HID
+* `SPLIT_KEYBOARD`
+  * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common