X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=converter%2Fps2_usb%2FMakefile.vusb;h=1bb44f8875d7c5e03035bf77825f199e7121aef6;hb=0f827cf94ccd6bef490ba889bc86c61483b1eb80;hp=4d5240c30948f44b20484d3b126945b1b85b0994;hpb=afb08462085132acf7a1962522952f7dbf064519;p=tmk_firmware.git

diff --git a/converter/ps2_usb/Makefile.vusb b/converter/ps2_usb/Makefile.vusb
index 4d5240c..1bb44f8 100644
--- a/converter/ps2_usb/Makefile.vusb
+++ b/converter/ps2_usb/Makefile.vusb
@@ -1,8 +1,3 @@
-#
-# Makefile for V-USB
-#
-
-
 # Target file name (without extension).
 TARGET = ps2_usb_vusb
 
@@ -13,18 +8,20 @@ TOP_DIR = ../..
 TARGET_DIR = .
 
 # keyboard dependent files
-SRC =	main.c \
-	keymap.c \
+SRC =	keymap.c \
 	matrix.c \
-	led.c \
-	ps2_usart.c
+	led.c
 
-CONFIG_H = config_vusb.h
+# Use USART for PS/2. With V-USB INT and BUSYWAIT code is not useful.
+SRC += protocol/ps2_usart.c
+OPT_DEFS += -DPS2_USE_USART
+
+CONFIG_H = config.h
 
 
 # V-USB debug level: To use ps2_usart.c level must be 0
 # ps2_usart.c requires USART to receive PS/2 signal.
-OPT_DEFS = -DDEBUG_LEVEL=0
+OPT_DEFS += -DDEBUG_LEVEL=0
 
 
 # MCU name, you MUST set this to match the board you are using
@@ -85,6 +82,18 @@ AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
 
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBasp           2048
+OPT_DEFS += -DBOOTLOADER_SIZE=2048
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
 
 include $(TOP_DIR)/protocol/vusb.mk
 include $(TOP_DIR)/protocol.mk