X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=converter%2Fnext_usb%2Fconfig.h;h=cd80b5af1b3e6ebfe03732a2258ed7a9febccf62;hb=27967f20086c4e3a86a4a442429a12acc330495c;hp=b3d188b0c112489eb389c6da070ae569bef8f4b4;hpb=6e9260cc176a77702b22381d01c59f0deafcb996;p=tmk_firmware.git

diff --git a/converter/next_usb/config.h b/converter/next_usb/config.h
index b3d188b..cd80b5a 100644
--- a/converter/next_usb/config.h
+++ b/converter/next_usb/config.h
@@ -60,6 +60,7 @@ POSSIBILITY OF SUCH DAMAGE.
 
 //#define TEENSY_CONFIG 1
 #define PRO_MICRO_CONFIG 1
+//#define TMK_CONFIG 1
 
 // comment out if you don't want the keyboard's LEDs to flash upon initialization
 #define NEXT_KBD_INIT_FLASH_LEDS
@@ -143,6 +144,43 @@ POSSIBILITY OF SUCH DAMAGE.
 #endif
 //================= End of Teensy 2.0 Configuration ==================
 
+
+//================ Start of TMK converter Configuration =================
+#ifdef TMK_CONFIG
+
+// this is the debugging LED that flashes when a key is being pressed
+// comment out in order to disable debugging LED
+#define NEXT_KBD_LED1_PORT  PORTD
+#define NEXT_KBD_LED1_PIN   PIND
+#define NEXT_KBD_LED1_DDR   DDRD
+#define NEXT_KBD_LED1_BIT   6
+
+#define NEXT_KBD_LED1_ON    NEXT_KBD_LED1_PORT |=  (1<<NEXT_KBD_LED1_BIT);
+#define NEXT_KBD_LED1_OFF   NEXT_KBD_LED1_PORT &= ~(1<<NEXT_KBD_LED1_BIT);
+
+// corresponds to the Keyboard In wire on the NeXT connector
+#define NEXT_KBD_OUT_PORT  PORTD
+#define NEXT_KBD_OUT_PIN   PIND
+#define NEXT_KBD_OUT_DDR   DDRD
+#define NEXT_KBD_OUT_BIT   1
+
+// corresponds to the Keyboard Out wire on the NeXT connector
+#define NEXT_KBD_IN_PORT   PORTD
+#define NEXT_KBD_IN_PIN    PIND
+#define NEXT_KBD_IN_DDR    DDRD
+#define NEXT_KBD_IN_BIT    0
+
+// this pin is an input for the power key on the NeXT keyboard
+// as the keyboard is powered on this should be normally high;
+// if it is pulled low it means the power button is being preseed
+#define NEXT_KBD_PWR_PORT  PORTD
+#define NEXT_KBD_PWR_PIN   PIND
+#define NEXT_KBD_PWR_DDR   DDRD
+#define NEXT_KBD_PWR_BIT   4
+
+#endif
+//================= End of TMK converter Configuration ==================
+
 /* key combination for command */
 #define IS_COMMAND() ( \
     (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))|| \