X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=common%2Fcommand.c;h=74b7c5ebcf50fad5e89fc0e5732396e8dc7cb3c1;hb=bf3a23b30645e98b9999b6c5cd6f29044a13821f;hp=5cdd168d46297dcbf1992bdce80f5ccc1181dfe9;hpb=6caefe9649d88673719e969502d220c5e9dcd124;p=tmk_firmware.git
diff --git a/common/command.c b/common/command.c
index 5cdd168..74b7c5e 100644
--- a/common/command.c
+++ b/common/command.c
@@ -19,25 +19,31 @@ along with this program. If not, see .
#include
#include "keycode.h"
#include "host.h"
+#include "keymap.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "timer.h"
#include "keyboard.h"
#include "bootloader.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#include "sleep_led.h"
+#include "led.h"
#include "command.h"
+
#ifdef MOUSEKEY_ENABLE
#include "mousekey.h"
#endif
-#ifdef HOST_PJRC
+#ifdef PROTOCOL_PJRC
# include "usb_keyboard.h"
# ifdef EXTRAKEY_ENABLE
# include "usb_extra.h"
# endif
#endif
-#ifdef HOST_VUSB
+#ifdef PROTOCOL_VUSB
# include "usbdrv.h"
#endif
@@ -52,8 +58,7 @@ static void mousekey_console_help(void);
#endif
static uint8_t numkey2num(uint8_t code);
-static void switch_layer(uint8_t layer);
-static void clear_keyboard(void);
+static void switch_default_layer(uint8_t layer);
typedef enum { ONESHOT, CONSOLE, MOUSEKEY } cmdstate_t;
@@ -95,17 +100,19 @@ bool command_extra(uint8_t code)
***********************************************************/
static void command_common_help(void)
{
- print_enable = true;
print("\n\n----- Command Help -----\n");
print("c: enter console mode\n");
print("d: toggle debug enable\n");
print("x: toggle matrix debug\n");
print("k: toggle keyboard debug\n");
print("m: toggle mouse debug\n");
- print("p: toggle print enable\n");
+#ifdef SLEEP_LED_ENABLE
+ print("z: toggle sleep LED test\n");
+#endif
print("v: print device version & info\n");
print("t: print timer count\n");
print("s: print status\n");
+ print("e: print eeprom config\n");
#ifdef NKRO_ENABLE
print("n: toggle NKRO\n");
#endif
@@ -119,10 +126,50 @@ static void command_common_help(void)
print("Paus: jump to bootloader\n");
}
+#ifdef BOOTMAGIC_ENABLE
+static void print_eeconfig(void)
+{
+ print("default_layer: "); print_dec(eeconfig_read_defalt_layer()); print("\n");
+
+ debug_config_t dc;
+ dc.raw = eeconfig_read_debug();
+ print("debug_config.raw: "); print_hex8(dc.raw); print("\n");
+ print(".enable: "); print_dec(dc.enable); print("\n");
+ print(".matrix: "); print_dec(dc.matrix); print("\n");
+ print(".keyboard: "); print_dec(dc.keyboard); print("\n");
+ print(".mouse: "); print_dec(dc.mouse); print("\n");
+
+ keymap_config_t kc;
+ kc.raw = eeconfig_read_keymap();
+ print("keymap_config.raw: "); print_hex8(kc.raw); print("\n");
+ print(".swap_control_capslock: "); print_dec(kc.swap_control_capslock); print("\n");
+ print(".capslock_to_control: "); print_dec(kc.capslock_to_control); print("\n");
+ print(".swap_lalt_lgui: "); print_dec(kc.swap_lalt_lgui); print("\n");
+ print(".swap_ralt_rgui: "); print_dec(kc.swap_ralt_rgui); print("\n");
+ print(".no_gui: "); print_dec(kc.no_gui); print("\n");
+ print(".swap_grave_esc: "); print_dec(kc.swap_grave_esc); print("\n");
+ print(".swap_backslash_backspace: "); print_dec(kc.swap_backslash_backspace); print("\n");
+}
+#endif
+
static bool command_common(uint8_t code)
{
static host_driver_t *host_driver = 0;
switch (code) {
+#ifdef SLEEP_LED_ENABLE
+ case KC_Z:
+ // test breathing sleep LED
+ print("Sleep LED test\n");
+ sleep_led_toggle();
+ led_set(host_keyboard_leds());
+ break;
+#endif
+#ifdef BOOTMAGIC_ENABLE
+ case KC_E:
+ print("eeconfig:\n");
+ print_eeconfig();
+ break;
+#endif
case KC_CAPSLOCK:
if (host_get_driver()) {
host_driver = host_get_driver();
@@ -138,7 +185,6 @@ static bool command_common(uint8_t code)
command_common_help();
break;
case KC_C:
- print_enable = true;
debug_matrix = false;
debug_keyboard = false;
debug_mouse = false;
@@ -204,19 +250,10 @@ static bool command_common(uint8_t code)
case KC_T: // print timer
print_val_hex32(timer_count);
break;
- case KC_P: // print toggle
- if (print_enable) {
- print("print disabled.\n");
- print_enable = false;
- } else {
- print_enable = true;
- print("print enabled.\n");
- }
- break;
case KC_S:
print("\n\n----- Status -----\n");
print_val_hex8(host_keyboard_leds());
-#ifdef HOST_PJRC
+#ifdef PROTOCOL_PJRC
print_val_hex8(UDCON);
print_val_hex8(UDIEN);
print_val_hex8(UDINT);
@@ -226,7 +263,7 @@ static bool command_common(uint8_t code)
print_val_hex8(usb_keyboard_idle_count);
#endif
-#ifdef HOST_VUSB
+#ifdef PROTOCOL_PJRC
# if USB_COUNT_SOF
print_val_hex8(usbSofCount);
# endif
@@ -245,7 +282,7 @@ static bool command_common(uint8_t code)
#ifdef EXTRAKEY_ENABLE
case KC_PSCREEN:
// TODO: Power key should take this feature? otherwise any key during suspend.
-#ifdef HOST_PJRC
+#ifdef PROTOCOL_PJRC
if (suspend && remote_wakeup) {
usb_remote_wakeup();
} else {
@@ -261,25 +298,16 @@ static bool command_common(uint8_t code)
#endif
break;
#endif
+ case KC_ESC:
+ case KC_GRV:
case KC_0:
- case KC_F10:
- switch_layer(0);
+ switch_default_layer(0);
break;
- case KC_1:
- case KC_F1:
- switch_layer(1);
- break;
- case KC_2:
- case KC_F2:
- switch_layer(2);
+ case KC_1 ... KC_9:
+ switch_default_layer((code - KC_1) + 1);
break;
- case KC_3:
- case KC_F3:
- switch_layer(3);
- break;
- case KC_4:
- case KC_F4:
- switch_layer(4);
+ case KC_F1 ... KC_F12:
+ switch_default_layer((code - KC_F1) + 1);
break;
default:
print("?");
@@ -294,7 +322,6 @@ static bool command_common(uint8_t code)
***********************************************************/
static void command_console_help(void)
{
- print_enable = true;
print("\n\n----- Console Help -----\n");
print("ESC/q: quit\n");
#ifdef MOUSEKEY_ENABLE
@@ -548,26 +575,10 @@ static uint8_t numkey2num(uint8_t code)
return 0;
}
-static void switch_layer(uint8_t layer)
+static void switch_default_layer(uint8_t layer)
{
- print_val_hex8(current_layer);
- print_val_hex8(default_layer);
- current_layer = layer;
- default_layer = layer;
- print("switch to "); print_val_hex8(layer);
-}
-
-static void clear_keyboard(void)
-{
- host_clear_keys();
- host_clear_mods();
- host_send_keyboard_report();
-
- host_system_send(0);
- host_consumer_send(0);
-
-#ifdef MOUSEKEY_ENABLE
- mousekey_clear();
- mousekey_send();
-#endif
+ print("switch_default_layer: "); print_dec(biton32(default_layer_state));
+ print(" to "); print_dec(layer); print("\n");
+ default_layer_set(layer);
+ clear_keyboard();
}