X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=Makefile;h=a7a10bf3264cdc57cc99f9142de02b5ea9f5df4c;hb=825aead3bdb74effee17d9436d79f2952550b5cf;hp=7473d3c312ea80f0a6933b984a4e409a6b978a71;hpb=7fd9003f59ad6a1de8d8b70fae74ba16df666c09;p=qmk_firmware.git diff --git a/Makefile b/Makefile index 7473d3c31..a7a10bf32 100644 --- a/Makefile +++ b/Makefile @@ -1,618 +1,268 @@ -# Hey Emacs, this is a -*- makefile -*- -#---------------------------------------------------------------------------- -# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. -# -# Released to the Public Domain -# -# Additional material for this makefile was written by: -# Peter Fleury -# Tim Henigan -# Colin O'Flynn -# Reiner Patommel -# Markus Pfaff -# Sander Pool -# Frederik Rouleau -# Carlos Lamas -# -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device, using avrdude. -# Please customize the avrdude settings below first! -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - - -# Target file name (without extension). -TARGET = mykey - - -# List C source files here. (C dependencies are automatically generated.) -SRC = $(TARGET).c \ - keymap.c \ - matrix.c \ - usb_device.c \ - usb_keyboard.c \ - usb_debug.c \ - print.c - - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 16000000 - - -# Output format. (can be srec, ihex, binary) -FORMAT = ihex - - -# Object files directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -OBJDIR = . - - -# List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = - - -# List Assembler source files here. -# Make them always end in a capital .S. Files ending in a lowercase .s -# will not be considered source files but generated files (assembler -# output from the compiler), and will be deleted upon "make clean"! -# Even though the DOS/Win* filesystem matches both .s and .S the same, -# it will preserve the spelling of the filenames, and gcc itself does -# care about how the name is spelled on its command-line. -ASRC = - - -# Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s - - -# Debugging format. -# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. -# AVR Studio 4.10 requires dwarf-2. -# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. -DEBUG = dwarf-2 - - -# List any extra directories to look for include files here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = - - -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=gnu99 - - -# Place -D or -U options here for C sources -CDEFS = -DF_CPU=$(F_CPU)UL - - -# Place -D or -U options here for ASM sources -ADEFS = -DF_CPU=$(F_CPU) - - -# Place -D or -U options here for C++ sources -CPPDEFS = -DF_CPU=$(F_CPU)UL -#CPPDEFS += -D__STDC_LIMIT_MACROS -#CPPDEFS += -D__STDC_CONSTANT_MACROS - - - -#---------------- Compiler Options C ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CFLAGS = -g$(DEBUG) -CFLAGS += $(CDEFS) -CFLAGS += -O$(OPT) -CFLAGS += -funsigned-char -CFLAGS += -funsigned-bitfields -CFLAGS += -ffunction-sections -CFLAGS += -fpack-struct -CFLAGS += -fshort-enums -CFLAGS += -Wall -CFLAGS += -Wstrict-prototypes -#CFLAGS += -mshort-calls -#CFLAGS += -fno-unit-at-a-time -#CFLAGS += -Wundef -#CFLAGS += -Wunreachable-code -#CFLAGS += -Wsign-compare -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) -CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -CFLAGS += $(CSTANDARD) - - -#---------------- Compiler Options C++ ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CPPFLAGS = -g$(DEBUG) -CPPFLAGS += $(CPPDEFS) -CPPFLAGS += -O$(OPT) -CPPFLAGS += -funsigned-char -CPPFLAGS += -funsigned-bitfields -CPPFLAGS += -fpack-struct -CPPFLAGS += -fshort-enums -CPPFLAGS += -fno-exceptions -CPPFLAGS += -Wall -CPPFLAGS += -Wundef -#CPPFLAGS += -mshort-calls -#CPPFLAGS += -fno-unit-at-a-time -#CPPFLAGS += -Wstrict-prototypes -#CPPFLAGS += -Wunreachable-code -#CPPFLAGS += -Wsign-compare -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) -CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -#CPPFLAGS += $(CSTANDARD) - - -#---------------- Assembler Options ---------------- -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns: create listing -# -gstabs: have the assembler create line number information; note that -# for use in COFF files, additional information about filenames -# and function names needs to be present in the assembler source -# files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex -# dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 - - -#---------------- Library Options ---------------- -# Minimalistic printf version -PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min - -# Floating point printf version (requires MATH_LIB = -lm below) -PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt - -# If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = -#PRINTF_LIB = $(PRINTF_LIB_MIN) -#PRINTF_LIB = $(PRINTF_LIB_FLOAT) - - -# Minimalistic scanf version -SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min - -# Floating point + %[ scanf version (requires MATH_LIB = -lm below) -SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt - -# If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = -#SCANF_LIB = $(SCANF_LIB_MIN) -#SCANF_LIB = $(SCANF_LIB_FLOAT) - - -MATH_LIB = -lm - - -# List any extra directories to look for libraries here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = - - - -#---------------- External Memory Options ---------------- - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# used for variables (.data/.bss) and heap (malloc()). -#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# only used for heap (malloc()). -#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff - -EXTMEMOPTS = - - - -#---------------- Linker Options ---------------- -# -Wl,...: tell GCC to pass this to linker. -# -Map: create map file -# --cref: add cross reference to map file -LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax -LDFLAGS += -Wl,--gc-sections -LDFLAGS += $(EXTMEMOPTS) -LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) -LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) -#LDFLAGS += -T linker_script.x - - - -#---------------- Programming Options (avrdude) ---------------- - -# Programming hardware -# Type: avrdude -c ? -# to get a full listing. -# -AVRDUDE_PROGRAMMER = stk500v2 - -# com1 = serial port. Use lpt1 to connect to parallel port. -AVRDUDE_PORT = com1 # programmer connected to serial device - -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep - - -# Uncomment the following if you want avrdude's erase cycle counter. -# Note that this counter needs to be initialized first using -Yn, -# see avrdude manual. -#AVRDUDE_ERASE_COUNTER = -y - -# Uncomment the following if you do /not/ wish a verification to be -# performed after programming the device. -#AVRDUDE_NO_VERIFY = -V - -# Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See -# to submit bug reports. -#AVRDUDE_VERBOSE = -v -v - -AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) -AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) -AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) - - - -#---------------- Debugging Options ---------------- - -# For simulavr only - target MCU frequency. -DEBUG_MFREQ = $(F_CPU) - -# Set the DEBUG_UI to either gdb or insight. -# DEBUG_UI = gdb -DEBUG_UI = insight - -# Set the debugging back-end to either avarice, simulavr. -DEBUG_BACKEND = avarice -#DEBUG_BACKEND = simulavr - -# GDB Init Filename. -GDBINIT_FILE = __avr_gdbinit - -# When using avarice settings for the JTAG -JTAG_DEV = /dev/com1 - -# Debugging port used to communicate between GDB / avarice / simulavr. -DEBUG_PORT = 4242 - -# Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when -# avarice is running on a different computer. -DEBUG_HOST = localhost - - - -#============================================================================ - - -# Define programs and commands. -SHELL = sh -CC = avr-gcc -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump -SIZE = avr-size -AR = avr-ar rcs -NM = avr-nm -AVRDUDE = avrdude -REMOVE = rm -f -REMOVEDIR = rm -rf -COPY = cp -WINSHELL = cmd - - -# Define Messages -# English -MSG_ERRORS_NONE = Errors: none -MSG_BEGIN = -------- begin -------- -MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: -MSG_SIZE_AFTER = Size after: -MSG_COFF = Converting to AVR COFF: -MSG_EXTENDED_COFF = Converting to AVR Extended COFF: -MSG_FLASH = Creating load file for Flash: -MSG_EEPROM = Creating load file for EEPROM: -MSG_EXTENDED_LISTING = Creating Extended Listing: -MSG_SYMBOL_TABLE = Creating Symbol Table: -MSG_LINKING = Linking: -MSG_COMPILING = Compiling C: -MSG_COMPILING_CPP = Compiling C++: -MSG_ASSEMBLING = Assembling: -MSG_CLEANING = Cleaning project: -MSG_CREATING_LIBRARY = Creating library: - - - - -# Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) - -# Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) - - -# Compiler flags to generate dependency files. -GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d - - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) -ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) -ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - - - - -# Default target. -all: begin gccversion sizebefore build sizeafter end - -# Change the build target to build a HEX file or a library. -build: elf hex eep lss sym -#build: lib - - -elf: $(TARGET).elf -hex: $(TARGET).hex -eep: $(TARGET).eep -lss: $(TARGET).lss -sym: $(TARGET).sym -LIBNAME=lib$(TARGET).a -lib: $(LIBNAME) - - - -# Eye candy. -# AVR Studio 3.x does not check make's exit code but relies on -# the following magic strings to be generated by the compile job. -begin: - @echo - @echo $(MSG_BEGIN) - -end: - @echo $(MSG_END) - @echo - - -# Display size of file. -HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex -#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf -ELFSIZE = $(SIZE) $(TARGET).elf - -sizebefore: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ - 2>/dev/null; echo; fi - -sizeafter: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ - 2>/dev/null; echo; fi - - - -# Display compiler version information. -gccversion : - @$(CC) --version - - - -# Program the device. -program: $(TARGET).hex $(TARGET).eep - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) - - -# Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set -# a breakpoint at main(). -gdb-config: - @$(REMOVE) $(GDBINIT_FILE) - @echo define reset >> $(GDBINIT_FILE) - @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) - @echo end >> $(GDBINIT_FILE) - @echo file $(TARGET).elf >> $(GDBINIT_FILE) - @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) -ifeq ($(DEBUG_BACKEND),simulavr) - @echo load >> $(GDBINIT_FILE) +ifndef VERBOSE +.SILENT: endif - @echo break main >> $(GDBINIT_FILE) - -debug: gdb-config $(TARGET).elf -ifeq ($(DEBUG_BACKEND), avarice) - @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. - @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ - $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) - @$(WINSHELL) /c pause +.DEFAULT_GOAL := all + +space := $(subst ,, ) +starting_makefile := $(subst $(space),_SPACE_,$(abspath $(firstword $(MAKEFILE_LIST)))) +mkfile_path := $(subst $(space),_SPACE_,$(abspath $(lastword $(MAKEFILE_LIST)))) +abs_tmk_root := $(patsubst %/,%,$(dir $(mkfile_path))) + +ifneq (,$(findstring /keyboards/,$(starting_makefile))) + possible_keyboard:=$(patsubst %/,%,$(dir $(patsubst $(abs_tmk_root)/keyboards/%,%,$(starting_makefile)))) + ifneq (,$(findstring /keymaps/,$(possible_keyboard))) + KEYMAP_DIR:=$(lastword $(subst /keymaps/, ,$(possible_keyboard))) + KEYBOARD_DIR:=$(firstword $(subst /keymaps/, ,$(possible_keyboard))) + ifneq (,$(findstring /,$(KEYBOARD_DIR))) + # SUBPROJECT_DIR:=$(lastword $(subst /, ,$(KEYBOARD_DIR))) + # KEYBOARD_DIR:=$(firstword $(subst /, ,$(KEYBOARD_DIR))) + tmk_root = ../../.. + else + tmk_root = ../../../.. + endif + else + KEYMAP_DIR:=default + KEYBOARD_DIR:=$(possible_keyboard) + ifneq (,$(findstring /,$(KEYBOARD_DIR))) + # SUBPROJECT_DIR:=$(lastword $(subst /, ,$(KEYBOARD_DIR))) + # KEYBOARD_DIR:=$(firstword $(subst /, ,$(KEYBOARD_DIR))) + tmk_root = ../../.. + else + tmk_root = ../.. + endif + endif else - @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ - $(DEBUG_MFREQ) --port $(DEBUG_PORT) + tmk_root = . endif - @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) - - +# $(info $(KEYBOARD_DIR)) +# $(info $(KEYMAP_DIR)) +# $(info $(SUBPROJECT_DIR)) +# Directory common source filess exist +TOP_DIR = $(tmk_root) +TMK_DIR = tmk_core +TMK_PATH = $(TOP_DIR)/$(TMK_DIR) +LIB_PATH = $(TOP_DIR)/lib -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT = $(OBJCOPY) --debugging -COFFCONVERT += --change-section-address .data-0x800000 -COFFCONVERT += --change-section-address .bss-0x800000 -COFFCONVERT += --change-section-address .noinit-0x800000 -COFFCONVERT += --change-section-address .eeprom-0x810000 +QUANTUM_DIR = quantum +QUANTUM_PATH = $(TOP_DIR)/$(QUANTUM_DIR) +ifdef keyboard + KEYBOARD ?= $(keyboard) +endif +ifdef KEYBOARD_DIR + KEYBOARD ?= $(KEYBOARD_DIR) +endif +ifndef KEYBOARD + KEYBOARD=planck +endif -coff: $(TARGET).elf - @echo - @echo $(MSG_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-avr $< $(TARGET).cof - - -extcoff: $(TARGET).elf - @echo - @echo $(MSG_EXTENDED_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof - - +MASTER ?= left +ifdef master + MASTER = $(master) +endif -# Create final output files (.hex, .eep) from ELF output file. -%.hex: %.elf - @echo - @echo $(MSG_FLASH) $@ - $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ -%.eep: %.elf - @echo - @echo $(MSG_EEPROM) $@ - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 +# converts things to keyboards/subproject +ifneq (,$(findstring /,$(KEYBOARD))) + TEMP:=$(KEYBOARD) + KEYBOARD:=$(firstword $(subst /, ,$(TEMP))) + SUBPROJECT:=$(lastword $(subst /, ,$(TEMP))) +endif -# Create extended listing file from ELF output file. -%.lss: %.elf - @echo - @echo $(MSG_EXTENDED_LISTING) $@ - $(OBJDUMP) -h -S -z $< > $@ +KEYBOARD_PATH = $(TOP_DIR)/keyboards/$(KEYBOARD) -# Create a symbol table from ELF output file. -%.sym: %.elf - @echo - @echo $(MSG_SYMBOL_TABLE) $@ - $(NM) -n $< > $@ +ifdef sub + SUBPROJECT=$(sub) +endif +ifdef subproject + SUBPROJECT=$(subproject) +endif +ifneq ("$(wildcard $(KEYBOARD_PATH)/$(KEYBOARD).c)","") + KEYBOARD_FILE = keyboards/$(KEYBOARD)/$(KEYBOARD).c + ifndef ARCH + ifneq ("$(wildcard $(KEYBOARD_PATH)/Makefile)","") + include $(KEYBOARD_PATH)/Makefile + endif + endif +else +$(error "$(KEYBOARD_PATH)/$(KEYBOARD).c" does not exist) +endif +ifdef SUBPROJECT_DEFAULT + SUBPROJECT?=$(SUBPROJECT_DEFAULT) +endif -# Create library from object files. -.SECONDARY : $(TARGET).a -.PRECIOUS : $(OBJ) -%.a: $(OBJ) - @echo - @echo $(MSG_CREATING_LIBRARY) $@ - $(AR) $@ $(OBJ) +ifdef SUBPROJECT + SUBPROJECT_PATH = $(TOP_DIR)/keyboards/$(KEYBOARD)/$(SUBPROJECT) + ifneq ("$(wildcard $(SUBPROJECT_PATH)/$(SUBPROJECT).c)","") + OPT_DEFS += -DSUBPROJECT_$(SUBPROJECT) + SUBPROJECT_FILE = keyboards/$(KEYBOARD)/$(SUBPROJECT)/$(SUBPROJECT).c + -include $(SUBPROJECT_PATH)/Makefile + else +$(error "$(SUBPROJECT_PATH)/$(SUBPROJECT).c" does not exist) + endif +endif +ifdef keymap + KEYMAP ?= $(keymap) +endif +ifdef KEYMAP_DIR + KEYMAP ?= $(KEYMAP_DIR) +endif +ifndef KEYMAP + KEYMAP = default +endif +KEYMAP_PATH = $(KEYBOARD_PATH)/keymaps/$(KEYMAP) +ifneq ("$(wildcard $(KEYMAP_PATH)/keymap.c)","") + KEYMAP_FILE = keyboards/$(KEYBOARD)/keymaps/$(KEYMAP)/keymap.c + -include $(KEYMAP_PATH)/Makefile +else + ifeq ("$(wildcard $(SUBPROJECT_PATH)/keymaps/$(KEYMAP)/keymap.c)","") +$(error "$(KEYMAP_PATH)/keymap.c" does not exist) + else + KEYMAP_PATH = $(SUBPROJECT_PATH)/keymaps/$(KEYMAP) + KEYMAP_FILE = keyboards/$(KEYBOARD)/$(SUBPROJECT)/keymaps/$(KEYMAP)/keymap.c + -include $(KEYMAP_PATH)/Makefile + endif +endif -# Link: create ELF output file from object files. -.SECONDARY : $(TARGET).elf -.PRECIOUS : $(OBJ) -%.elf: $(OBJ) - @echo - @echo $(MSG_LINKING) $@ - $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) +ifdef SUBPROJECT + TARGET ?= $(KEYBOARD)_$(SUBPROJECT)_$(KEYMAP) +else + TARGET ?= $(KEYBOARD)_$(KEYMAP) +endif +BUILD_DIR = .build +# Object files directory +# To put object files in current directory, use a dot (.), do NOT make +# this an empty or blank macro! +OBJDIR = $(BUILD_DIR)/obj_$(TARGET) -# Compile: create object files from C source files. -$(OBJDIR)/%.o : %.c - @echo - @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ -# Compile: create object files from C++ source files. -$(OBJDIR)/%.o : %.cpp - @echo - @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ +ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","") + CONFIG_H = $(KEYMAP_PATH)/config.h +else + CONFIG_H = $(KEYBOARD_PATH)/config.h + ifdef SUBPROJECT + ifneq ("$(wildcard $(SUBPROJECT_PATH)/$(SUBPROJECT).c)","") + CONFIG_H = $(SUBPROJECT_PATH)/config.h + endif + endif +endif +# # project specific files +SRC += $(KEYBOARD_FILE) \ + $(KEYMAP_FILE) \ + $(QUANTUM_DIR)/quantum.c \ + $(QUANTUM_DIR)/keymap_common.c \ + $(QUANTUM_DIR)/keycode_config.c \ + $(QUANTUM_DIR)/process_keycode/process_leader.c -# Compile: create assembler files from C source files. -%.s : %.c - $(CC) -S $(ALL_CFLAGS) $< -o $@ +ifdef SUBPROJECT + SRC += $(SUBPROJECT_FILE) +endif +ifdef SUBPROJECT + SRC += $(SUBPROJECT_FILE) +endif -# Compile: create assembler files from C++ source files. -%.s : %.cpp - $(CC) -S $(ALL_CPPFLAGS) $< -o $@ +ifdef SUBPROJECT + SRC += $(SUBPROJECT_FILE) +endif +ifndef CUSTOM_MATRIX + SRC += $(QUANTUM_DIR)/matrix.c +endif -# Assemble: create object files from assembler source files. -$(OBJDIR)/%.o : %.S - @echo - @echo $(MSG_ASSEMBLING) $< - $(CC) -c $(ALL_ASFLAGS) $< -o $@ +ifeq ($(strip $(MIDI_ENABLE)), yes) + OPT_DEFS += -DMIDI_ENABLE + SRC += $(QUANTUM_DIR)/process_keycode/process_audio.c +endif +ifeq ($(strip $(AUDIO_ENABLE)), yes) + OPT_DEFS += -DAUDIO_ENABLE + SRC += $(QUANTUM_DIR)/process_keycode/process_music.c + SRC += $(QUANTUM_DIR)/audio/audio.c + SRC += $(QUANTUM_DIR)/audio/voices.c + SRC += $(QUANTUM_DIR)/audio/luts.c +endif -# Create preprocessed source for use in sending a bug report. -%.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ +ifeq ($(strip $(UNICODE_ENABLE)), yes) + OPT_DEFS += -DUNICODE_ENABLE + SRC += $(QUANTUM_DIR)/process_keycode/process_unicode.c +endif +ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) + OPT_DEFS += -DRGBLIGHT_ENABLE + SRC += $(QUANTUM_DIR)/light_ws2812.c + SRC += $(QUANTUM_DIR)/rgblight.c +endif -# Target: clean project. -clean: begin clean_list end +ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) + OPT_DEFS += -DTAP_DANCE_ENABLE + SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c +endif -clean_list : - @echo - @echo $(MSG_CLEANING) - $(REMOVE) $(TARGET).hex - $(REMOVE) $(TARGET).eep - $(REMOVE) $(TARGET).cof - $(REMOVE) $(TARGET).elf - $(REMOVE) $(TARGET).map - $(REMOVE) $(TARGET).sym - $(REMOVE) $(TARGET).lss - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) - $(REMOVE) $(SRC:.c=.s) - $(REMOVE) $(SRC:.c=.d) - $(REMOVE) $(SRC:.c=.i) - $(REMOVEDIR) .dep +ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes) + SERIAL_DIR = $(QUANTUM_DIR)/serial_link + SERIAL_PATH = $(QUANTUM_PATH)/serial_link + SERIAL_SRC = $(wildcard $(SERIAL_PATH)/protocol/*.c) + SERIAL_SRC += $(wildcard $(SERIAL_PATH)/system/*.c) + SRC += $(patsubst $(QUANTUM_PATH)/%,%,$(SERIAL_SRC)) + OPT_DEFS += -DSERIAL_LINK_ENABLE + VAPTH += $(SERIAL_PATH) +endif +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax -# Create object files directory -$(shell mkdir $(OBJDIR) 2>/dev/null) +# Search Path +VPATH += $(KEYMAP_PATH) +ifdef SUBPROJECT + VPATH += $(SUBPROJECT_PATH) +endif +VPATH += $(KEYBOARD_PATH) +VPATH += $(TOP_DIR) +VPATH += $(TMK_PATH) +VPATH += $(QUANTUM_PATH) +VPATH += $(QUANTUM_PATH)/keymap_extras +VPATH += $(QUANTUM_PATH)/audio +VPATH += $(QUANTUM_PATH)/process_keycode + + +# We can assume a ChibiOS target When MCU_FAMILY is defined, since it's not used for LUFA +ifdef MCU_FAMILY + PLATFORM=CHIBIOS +else + PLATFORM=AVR +endif +include $(TMK_PATH)/common.mk +ifeq ($(PLATFORM),AVR) + include $(TMK_PATH)/protocol/lufa.mk + include $(TMK_PATH)/avr.mk +else ifeq ($(PLATFORM),CHIBIOS) + include $(TMK_PATH)/protocol/chibios.mk + include $(TMK_PATH)/chibios.mk + OPT_OS = chibios +else + $(error Unknown platform) +endif -# Include the dependency files. --include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) +ifeq ($(strip $(VISUALIZER_ENABLE)), yes) + VISUALIZER_DIR = $(QUANTUM_DIR)/visualizer + VISUALIZER_PATH = $(QUANTUM_PATH)/visualizer + include $(VISUALIZER_PATH)/visualizer.mk +endif +include $(TMK_PATH)/rules.mk -# Listing of phony targets. -.PHONY : all begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff \ -clean clean_list program debug gdb-config +GIT_VERSION := $(shell git describe --abbrev=6 --dirty --always --tags 2>/dev/null || date +"%Y-%m-%d-%H:%M:%S") +BUILD_DATE := $(shell date +"%Y-%m-%d-%H:%M:%S") +OPT_DEFS += -DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYMAP=\"$(KEYMAP)\" +OPT_DEFS += -DQMK_VERSION=\"$(GIT_VERSION)\" -DQMK_BUILDDATE=\"$(BUILD_DATE)\"