X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;f=Documentation%2Fnotation%2Fstaff.itely;h=1a2f07566daa8409658c88fbcb6d00eba08741ff;hb=fd5bccb38f3219fe9bb8f4c2240d84e5c827615b;hp=c964305f2339c334562ced8222a5e9a42b7868f3;hpb=580faff1d6167b1500228dc5c5ae073dca0ead40;p=lilypond.git

diff --git a/Documentation/notation/staff.itely b/Documentation/notation/staff.itely
index c964305f23..1a2f07566d 100644
--- a/Documentation/notation/staff.itely
+++ b/Documentation/notation/staff.itely
@@ -7,12 +7,14 @@
     Guide, node Updating translation committishes..
 @end ignore
 
-@c \version "2.13.36"
+@c \version "2.19.21"
 
 @node Staff notation
 @section Staff notation
 
-@lilypondfile[quote]{staff-headword.ly}
+@c The line width is a bit of a hack to allow space for the
+@c  instrument names.
+@lilypondfile[quote,ragged-right,line-width=14.5\cm,staffsize=16]{staff-headword.ly}
 
 This section explains how to influence the appearance of staves,
 how to print scores with more than one staff, and how to add tempo
@@ -67,12 +69,12 @@ grouping staves.
 
 @notation{Staves} (singular: @notation{staff}) are created with
 the @code{\new} or @code{\context} commands.  For details, see
-@ref{Creating contexts}.
+@ref{Creating and referencing contexts}.
 
 The basic staff context is @code{Staff}:
 
-@lilypond[verbatim,quote,relative=2]
-\new Staff { c4 d e f }
+@lilypond[verbatim,quote]
+\new Staff \relative { c''4 d e f }
 @end lilypond
 
 The @code{DrumStaff} context creates a five-line staff set up for
@@ -91,15 +93,15 @@ For details, see @ref{Percussion staves}.
 displays the rhythmic values of the input.  Real durations are
 preserved.  For details, see @ref{Showing melody rhythms}.
 
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
 \new RhythmicStaff { c4 d e f }
 @end lilypond
 
 @code{TabStaff} creates a tablature with six strings in standard
 guitar tuning.  For details, see @ref{Default tablatures}.
 
-@lilypond[verbatim,quote,relative=2]
-\new TabStaff { c4 d e f }
+@lilypond[verbatim,quote]
+\new TabStaff \relative { c''4 d e f }
 @end lilypond
 
 There are two staff contexts specific for the notation of ancient
@@ -109,21 +111,20 @@ described in @ref{Pre-defined contexts}.
 The @code{GregorianTranscriptionStaff} context creates a staff to
 notate modern Gregorian chant.  It does not show bar lines.
 
-@lilypond[verbatim,quote,relative=2]
-\new GregorianTranscriptionStaff { c4 d e f e d }
+@lilypond[verbatim,quote]
+\new GregorianTranscriptionStaff \relative { c''4 d e f e d }
 @end lilypond
 
 New single staff contexts may be defined.  For details, see
 @ref{Defining new contexts}.
 
-
 @seealso
 Music Glossary:
 @rglos{staff},
 @rglos{staves}.
 
 Notation Reference:
-@ref{Creating contexts},
+@ref{Creating and referencing contexts},
 @ref{Percussion staves},
 @ref{Showing melody rhythms},
 @ref{Default tablatures},
@@ -173,40 +174,40 @@ If no context is specified, the default properties will be used:
 the group is started with a vertical line, and the bar lines are
 not connected.
 
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
 <<
-  \new Staff { c1 c }
-  \new Staff { c1 c }
+  \new Staff \relative { c''1 c }
+  \new Staff \relative { c''1 c }
 >>
 @end lilypond
 
 In the @code{StaffGroup} context, the group is started with a
 bracket and bar lines are drawn through all the staves.
 
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
 \new StaffGroup <<
-  \new Staff { c1 c }
-  \new Staff { c1 c }
+  \new Staff \relative { c''1 c }
+  \new Staff \relative { c''1 c }
 >>
 @end lilypond
 
 In a @code{ChoirStaff}, the group starts with a bracket, but bar
 lines are not connected.
 
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
 \new ChoirStaff <<
-  \new Staff { c1 c }
-  \new Staff { c1 c }
+  \new Staff \relative { c''1 c }
+  \new Staff \relative { c''1 c }
 >>
 @end lilypond
 
 In a @code{GrandStaff}, the group begins with a brace, and bar
 lines are connected between the staves.
 
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
 \new GrandStaff <<
-  \new Staff { c1 c }
-  \new Staff { c1 c }
+  \new Staff \relative { c''1 c }
+  \new Staff \relative { c''1 c }
 >>
 @end lilypond
 
@@ -214,11 +215,11 @@ The @code{PianoStaff} is identical to a @code{GrandStaff}, except
 that it supports printing the instrument name directly.  For
 details, see @ref{Instrument names}.
 
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
 \new PianoStaff <<
   \set PianoStaff.instrumentName = #"Piano"
-  \new Staff { c1 c }
-  \new Staff { c1 c }
+  \new Staff \relative { c''1 c }
+  \new Staff \relative { \clef bass c1 c }
 >>
 @end lilypond
 
@@ -235,10 +236,10 @@ New staff group contexts may be defined.  For details, see
 
 @snippets
 
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
 {use-square-bracket-at-the-start-of-a-staff-group.ly}
 
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
 {display-bracket-with-only-one-staff-in-a-system.ly}
 
 @cindex mensurstriche layout
@@ -246,10 +247,9 @@ New staff group contexts may be defined.  For details, see
 @cindex transcription of mensural music
 @cindex mensural music, transcription of
 
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
 {mensurstriche-layout-bar-lines-between-the-staves.ly}
 
-
 @seealso
 Music Glossary:
 @rglos{brace},
@@ -290,17 +290,17 @@ Staff-group contexts can be nested to arbitrary depths.  In this
 case, each child context creates a new bracket adjacent to the
 bracket of its parent group.
 
-@lilypond[verbatim,quote,relative=2]
+@lilypond[verbatim,quote]
 \new StaffGroup <<
-  \new Staff { c2 c | c2 c }
+  \new Staff \relative { c''2 c | c2 c }
   \new StaffGroup <<
-    \new Staff { g2 g | g2 g }
+    \new Staff \relative { g'2 g | g2 g }
     \new StaffGroup \with {
       systemStartDelimiter = #'SystemStartSquare
     }
     <<
-      \new Staff { e2 e | e2 e }
-      \new Staff { c2 c | c2 c }
+      \new Staff \relative { e'2 e | e2 e }
+      \new Staff \relative { c'2 c | c2 c }
     >>
   >>
 >>
@@ -312,10 +312,9 @@ New nested staff group contexts can be defined.  For details, see
 
 @snippets
 
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
 {nesting-staves.ly}
 
-
 @seealso
 Notation Reference:
 @ref{Grouping staves},
@@ -333,6 +332,7 @@ Internals Reference:
 @rinternals{SystemStartBracket},
 @rinternals{SystemStartSquare}.
 
+
 @node Separating systems
 @unnumberedsubsubsec Separating systems
 
@@ -350,15 +350,15 @@ turned on with a @code{\paper} option.
   \score {
     \new StaffGroup <<
       \new Staff {
-        \relative c'' {
-          c4 c c c
+        \relative {
+          c''4 c c c
           \break
           c4 c c c
         }
       }
       \new Staff {
-        \relative c'' {
-          c4 c c c
+        \relative {
+          c''4 c c c
           \break
           c4 c c c
         }
@@ -401,125 +401,160 @@ sections are also described.
 @node Staff symbol
 @unnumberedsubsubsec Staff symbol
 
-@cindex adjusting staff symbol
-@cindex drawing staff symbol
-@cindex staff symbol, setting of
-@cindex staff symbol, drawing
-@cindex stop staff lines
-@cindex start staff lines
-@cindex staff lines, amount of
-@cindex staff lines, number of
-@cindex staff line, thickness of
-@cindex amount of staff lines
-@cindex thickness of staff lines
-@cindex ledger lines, setting
-@cindex setting of ledger lines
-@cindex spacing of ledger lines
-@cindex number of staff lines
-
-The lines of a staff belong to the @code{StaffSymbol} grob.
-@code{StaffSymbol} properties can be modified to change the
-appearance of a staff, but they must be modified before the staff
-is created.
-
-The number of staff lines may be changed.  The clef position and
-the position of middle C may need to be modified to fit the new
-staff.  For an explanation, refer to the snippet section in
-@ref{Clef}.
+@cindex staff symbol
+@cindex staff lines, stopping and starting
+@cindex staff lines, modifying
+@cindex ledger lines
+@cindex ledger lines, internal
+@cindex ledger lines, modifying
 
-@lilypond[verbatim,quote,relative=2]
-\new Staff \with {
-  \override StaffSymbol #'line-count = #3
+@funindex \startStaff
+@funindex startStaff
+@funindex \stopStaff
+@funindex stopStaff
+
+The @code{\stopStaff} and @code{\startStaff} commands can be used to
+stop or (re)start the staff lines respectively, from being printed at
+any point witin a score.
+
+@lilypond[verbatim,quote]
+\relative {
+  \stopStaff f''4 d \startStaff g, e
+  f'4 d \stopStaff g, e
+  f'4 d \startStaff g, e
 }
-{ d4 d d d }
 @end lilypond
 
-Staff line thickness can be modified.  The thickness of ledger
-lines and stems are also affected, since they depend on staff line
-thickness.
+@predefined
+@code{\startStaff},
+@code{\stopStaff}.
+@endpredefined
+
+The lines of a staff belong to the @code{StaffSymbol} grob (including
+ledger lines) and can be modified using @code{StaffSymbol} properties, but
+these modifications must be made before the staff is (re)started.
 
-@lilypond[verbatim,quote,relative=1]
-\new Staff \with {
-  \override StaffSymbol #'thickness = #3
+The number of staff lines can be altered:
+
+@lilypond[verbatim,quote]
+\relative {
+  f''4 d \stopStaff
+  \override Staff.StaffSymbol.line-count = #2
+  \startStaff g, e |
+
+  f'4 d \stopStaff
+  \revert Staff.StaffSymbol.line-count
+  \startStaff g, e |
 }
-{ e4 d c b }
 @end lilypond
 
-Ledger line thickness can be set independently of staff line
-thickness.  In the example the two numbers are factors multiplying
-the staff line thickness and the staff line spacing.  The two
-contributions are added to give the ledger line thickness.
+The position of each staff line can also be altered.  A list of
+numbers sets each line's position.  @code{0}@tie{}corresponds to the normal
+center line, and the normal line positions are
+@code{(-4@tie{}-2@tie{}0@tie{}2@tie{}4)}.  A single staff line is
+printed for every value entered so that the number of staff lines, as
+well as their position, can be changed with a single override.
 
-@lilypond[verbatim,quote,relative=1]
-\new Staff \with {
-  \override StaffSymbol #'ledger-line-thickness = #'(1 . 0.2)
+@lilypond[verbatim,quote]
+\relative {
+  f''4 d \stopStaff
+  \override Staff.StaffSymbol.line-positions = #'(1 3 5 -1 -3)
+  \startStaff g, e |
+  f'4 d \stopStaff
+  \override Staff.StaffSymbol.line-positions = #'(8 6.5 -6 -8 -0.5)
+  \startStaff g, e |
 }
-{ e4 d c b }
 @end lilypond
 
-The distance between staff lines can be changed.  This setting
-affects the spacing of ledger lines as well.
+To preserve typical stem directions (in the bottom half of the staff
+stems point up, in the top half they point down), align the center
+line (or space) of the customized staff with the position of the
+normal center line (0).  The clef position and the position of
+middle@tie{}C may need to be adjusted accordingly to fit the new
+lines.  See @ref{Clef}.
 
-@lilypond[verbatim,quote,relative=1]
+Staff line thickness can be altered.  Ledger lines and note stems, by
+default, are also affected.
+
+@lilypond[verbatim,quote]
 \new Staff \with {
-  \override StaffSymbol #'staff-space = #1.5
+  \override StaffSymbol.thickness = #3
+} \relative {
+  f''4 d g, e
 }
-{ a4 b c d }
 @end lilypond
 
-Further details about the properties of @code{StaffSymbol} can be
-found in @rinternals{staff-symbol-interface}.
+It is also possible to set ledger line thickness independently of staff
+lines.
 
-@cindex stopping a staff
-@cindex starting a staff
-@cindex staff, starting
-@cindex staff, stopping
+@lilypond[verbatim,quote]
+\new Staff \with {
+  \override StaffSymbol.thickness = #2
+  \override StaffSymbol.ledger-line-thickness = #'(0.5 . 0.4)
+} \relative {
+  f'''4 a, a,, f
+}
+@end lilypond
 
-@funindex \startStaff
-@funindex startStaff
-@funindex \stopStaff
-@funindex stopStaff
+@noindent
+The first value is multiplied by the staff line thickness, the second by
+the staff space and then the two values are added together to give the
+new thickness of the ledger line.
+
+The vertical positions of ledger lines can be altered,
 
-Modifications to staff properties in the middle of a score can be
-placed between @code{\stopStaff} and @code{\startStaff}:
-
-@lilypond[verbatim,quote,relative=2]
-c2 c
-\stopStaff
-\override Staff.StaffSymbol #'line-count = #2
-\startStaff
-b2 b
-\stopStaff
-\revert Staff.StaffSymbol #'line-count
-\startStaff
-a2 a
+@lilypond[verbatim,quote]
+\new Staff \with {
+  \override StaffSymbol.ledger-positions = #'(-3 -2 -1 2 5 6)
+} \relative {
+  f'''4 a, a,, f
+}
 @end lilypond
 
-@noindent
-In general, @code{\startStaff} and @code{\stopStaff} can be used
-to stop or start a staff in the middle of a score.
-
-@lilypond[verbatim,quote,relative=2]
-c4 b a2
-\stopStaff
-b4 c d2
-\startStaff
-e4 d c2
+Additional ledger lines can be made to appear above or below note heads
+depending on the current position relative to other note heads that
+also have their own ledger lines.
+
+@lilypond[verbatim,quote]
+\new Staff \with {
+  \override StaffSymbol.ledger-extra = #4
+} \relative {
+  f'''4 a, d, f,
+}
 @end lilypond
 
+Ledger lines can also be made to appear inside the staff where custom
+staff lines are required.  The example shows the default position of
+ledger lines when the explicit @code{ledger-position} is and is not set.
+The @code{\stopStaff} is needed in the example to revert the
+@code{\override} for the whole @code{StaffSymbol}.
 
-@predefined
-@code{\startStaff},
-@code{\stopStaff}.
-@endpredefined
+@lilypond[verbatim,quote]
+\relative d' {
+  \override Staff.StaffSymbol.line-positions = #'(-8 0 2 4)
+  d4 e f g
+  \stopStaff
+  \startStaff
+  \override Staff.StaffSymbol.ledger-positions = #'(-8 -6 (-4 -2) 0)
+  d4 e f g
+}
+@end lilypond
 
+The distance between staff lines can be altered.  This affects ledger
+line spacing as well.
 
-@snippets
+@lilypond[verbatim,quote]
+\new Staff \with {
+  \override StaffSymbol.staff-space = #1.5
+} \relative {
+  f'''4 d, g, e,
+}
+@end lilypond
 
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@snippets
+@lilypondfile[verbatim,quote,texidoc,doctitle]
 {making-some-staff-lines-thicker-than-the-others.ly}
 
-
 @seealso
 Music Glossary:
 @rglos{line},
@@ -555,8 +590,8 @@ Internals Reference:
 staff in the appropriate location:
 
 @lilypond[verbatim,quote]
-\new Staff \relative c'' {
-  c4 b d c
+\new Staff \relative {
+  c''4 b d c
   <<
     { c4 b d c }
     \new Staff { e4 d f e }
@@ -578,17 +613,15 @@ to align the ossia staff.  This method is most appropriate when
 only a few ossia staves are needed.
 
 @lilypond[verbatim,quote]
-\new Staff = main \relative c'' {
-  c4 b d c
+\new Staff = "main" \relative {
+  c''4 b d c
   <<
     { c4 b d c }
 
     \new Staff \with {
       \remove "Time_signature_engraver"
       alignAboveContext = #"main"
-      fontSize = #-3
-      \override StaffSymbol #'staff-space = #(magstep -3)
-      \override StaffSymbol #'thickness = #(magstep -3)
+      \magnifyStaff #2/3
       firstClef = ##f
     }
     { e4 d f e }
@@ -607,20 +640,18 @@ example.
 
 @lilypond[verbatim,quote,ragged-right]
 <<
-  \new Staff = ossia \with {
+  \new Staff = "ossia" \with {
     \remove "Time_signature_engraver"
-    \override Clef #'transparent = ##t
-    fontSize = #-3
-    \override StaffSymbol #'staff-space = #(magstep -3)
-    \override StaffSymbol #'thickness = #(magstep -3)
+    \hide Clef
+    \magnifyStaff #2/3
   }
   { \stopStaff s1*6 }
 
-  \new Staff \relative c' {
-    c4 b c2
+  \new Staff \relative {
+    c'4 b c2
     <<
       { e4 f e2 }
-      \context Staff = ossia {
+      \context Staff = "ossia" {
         \startStaff e4 g8 f e2 \stopStaff
       }
     >>
@@ -628,7 +659,7 @@ example.
     c4 b c2
     <<
       { g4 a g2 }
-      \context Staff = ossia {
+      \context Staff = "ossia" {
         \startStaff g4 e8 f g2 \stopStaff
       }
     >>
@@ -638,26 +669,25 @@ example.
 @end lilypond
 
 
-Using the @code{\Staff \RemoveEmptyStaves} command to create ossia
+Using the @code{\RemoveAllEmptyStaves} command to create ossia
 staves may be used as an alternative.  This method is most
 convenient when ossia staves occur immediately following a line
 break.  For more information about
-@code{\Staff \RemoveEmptyStaves}, see @ref{Hiding staves}.
+@code{\RemoveAllEmptyStaves}, see @ref{Hiding staves}.
 
 @lilypond[verbatim,quote,ragged-right]
 <<
-  \new Staff = ossia \with {
+  \new Staff = "ossia" \with {
     \remove "Time_signature_engraver"
-    \override Clef #'transparent = ##t
-    fontSize = #-3
-    \override StaffSymbol #'staff-space = #(magstep -3)
-    \override StaffSymbol #'thickness = #(magstep -3)
-  } \relative c'' {
+    \hide Clef
+    \magnifyStaff #2/3
+    \RemoveAllEmptyStaves
+  } \relative {
     R1*3
-    c4 e8 d c2
+    c''4 e8 d c2
   }
-  \new Staff \relative c' {
-    c4 b c2
+  \new Staff \relative {
+    c'4 b c2
     e4 f e2
     g4 a g2 \break
     c4 b c2
@@ -665,22 +695,14 @@ break.  For more information about
     e4 d c2
   }
 >>
-
-\layout {
-  \context {
-    \Staff \RemoveEmptyStaves
-    \override VerticalAxisGroup #'remove-first = ##t
-  }
-}
 @end lilypond
 
 
 @snippets
 
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
 {vertically-aligning-ossias-and-lyrics.ly}
 
-
 @seealso
 Music Glossary:
 @rglos{ossia},
@@ -709,10 +731,14 @@ Internals Reference:
 @cindex Frenched staff
 @cindex staff, hiding
 @cindex staff, empty
-@cindex hiding of staves
+@cindex hiding staves
+@cindex hiding ancient staves
+@cindex hiding rhythmic staves
+@cindex hiding vaticana staves
 @cindex empty staves
 
 @funindex \RemoveEmptyStaves
+@funindex \RemoveAllEmptyStaves
 @funindex Staff_symbol_engraver
 @funindex \stopStaff
 @funindex stopStaff
@@ -726,15 +752,18 @@ alternative, @code{\stopStaff} may be used.
 \new Staff \with {
   \remove "Staff_symbol_engraver"
 }
-\relative c''' { a8 f e16 d c b a2 }
+\relative { a''8 f e16 d c b a2 }
 @end lilypond
 
 
-Empty staves can be hidden by setting the
-@code{\Staff \RemoveEmptyStaves} command in the @code{\layout}
-block.  In orchestral scores, this style is known as @q{Frenched
-Score}.  By default, this command hides and removes all empty
-staves in a score except for those in the first system.
+Empty staves can be hidden (for a so-called @q{Frenched Score})
+by applying the @code{\RemoveEmptyStaves} command on a context, which
+can be done globally (in a @code{\layout} block) as well as for
+specific staves only (in a @code{\with} block).  This command removes
+all empty staves in a score except for those in the first system.  If
+you want those in the first system to be hidden also, use
+@code{\RemoveAllEmptyStaves}.  Supported contexts are @code{Staff},
+@code{RhythmicStaff} and @code{VaticanaStaff}.
 
 @warning{A staff is considered empty when it contains only
 multi-measure rests, rests, skips, spacer rests, or a combination of these
@@ -743,13 +772,14 @@ elements.}
 @lilypond[verbatim,quote,ragged-right]
 \layout {
   \context {
-    \Staff \RemoveEmptyStaves
+    \Staff
+    \RemoveEmptyStaves
   }
 }
 
-\relative c' <<
+\relative <<
   \new Staff {
-    e4 f g a \break
+    e'4 f g a \break
     b1 \break
     a4 b c2
   }
@@ -764,33 +794,15 @@ elements.}
 @cindex ossia
 
 @noindent
-@code{\Staff \RemoveEmptyStaves} can also be used to create ossia
+@code{\RemoveAllEmptyStaves} can also be used to create ossia
 sections for a staff.  For details, see @ref{Ossia staves}.
 
-@cindex hiding ancient staves
-@cindex hiding rhythmic staves
-
-@funindex \RemoveEmptyStaves
-
-The @code{\VaticanaStaff \RemoveEmptyStaves} command may be used to
-hide empty staves in ancient music contexts.  Similarly,
-@code{\RhythmicStaff \RemoveEmptyStaves} may be used to hide empty
-@code{RhythmicStaff} contexts.
-
 
 @predefined
-@code{\Staff \RemoveEmptyStaves},
-@code{\VaticanaStaff \RemoveEmptyStaves},
-@code{\RhythmicStaff \RemoveEmptyStaves}.
+@code{\RemoveEmptyStaves},
+@code{\RemoveAllEmptyStaves}.
 @endpredefined
 
-
-@snippets
-
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
-{removing-the-first-empty-line.ly}
-
-
 @seealso
 Music Glossary:
 @rglos{Frenched staff}.
@@ -817,23 +829,22 @@ Internals Reference:
 @rinternals{VerticalAxisGroup},
 @rinternals{Staff_symbol_engraver}.
 
-
 @knownissues
-
 Removing @code{Staff_symbol_engraver} also hides bar lines.  If
 bar line visibility is forced, formatting errors may occur.  In
 this case, use the following overrides instead of removing the
 engraver:
 
 @example
-\override StaffSymbol #'stencil = ##f
-\override NoteHead #'no-ledgers = ##t
+\omit StaffSymbol
+\override NoteHead.no-ledgers = ##t
 @end example
 
 For the Known issues and warnings associated with
 @code{\Staff \RemoveEmptyStaves} see
 @ref{Changing context default settings}.
 
+
 @node Writing parts
 @subsection Writing parts
 
@@ -854,153 +865,146 @@ format cue notes are also described.
 @cindex instrument names, short
 
 Instrument names can be printed on the left side of staves in the
-@code{Staff} and @code{PianoStaff} contexts.  The value of
+@code{Staff}, @code{PianoStaff}, @code{StaffGroup}, @code{GrandStaff}
+and @code{ChoirStaff} contexts.  The value of
 @code{instrumentName} is used for the first staff, and the value
 of @code{shortInstrumentName} is used for all succeeding staves.
 
-@lilypond[verbatim,quote,ragged-right,relative=1]
-\set Staff.instrumentName = #"Violin "
-\set Staff.shortInstrumentName = #"Vln "
-c4.. g'16 c4.. g'16
-\break
-c1
+@lilypond[verbatim,quote,ragged-right]
+\new Staff \with {
+  instrumentName = #"Violin "
+  shortInstrumentName = #"Vln. "
+} \relative {
+  c'4.. g'16 c4.. g'16 \break | c1 |
+}
 @end lilypond
 
-Markup mode can be used to create more complicated instrument
-names:
+@cindex instrument names, complex
 
-@lilypond[verbatim,quote,relative=2]
-\set Staff.instrumentName = \markup {
-  \column { "Clarinetti"
-            \line { "in B" \smaller \flat } } }
-c4 c,16 d e f g2
+@code{\markup} can be used to create more complex instrument names:
+
+@lilypond[verbatim,quote]
+\new Staff \with {
+  instrumentName = \markup {
+    \column { "Clarinetti"
+      \line { "in B" \smaller \flat }
+    }
+  }
+} \relative {
+  c''4 c,16 d e f g2
+}
 @end lilypond
 
 @cindex instrument names, centering
 
-When two or more staff contexts are grouped together, the
-instrument names and short instrument names are centered by
-default.  To center multi-line instrument names,
-@code{\center-column} must be used:
+When two or more staff contexts are grouped together, the instrument
+names and short instrument names are centered by default.  To center
+multi-line instrument names, @code{\center-column} must be used:
 
-@lilypond[verbatim,quote,indent=1.5\cm,relative=2]
+@lilypond[verbatim,quote,indent=1.5\cm]
 <<
-  \new Staff {
-    \set Staff.instrumentName = #"Flute"
-    f2 g4 f
-  }
-  \new Staff {
-    \set Staff.instrumentName = \markup \center-column {
-      Clarinet
-      \line { "in B" \smaller \flat }
+  \new Staff \with {
+    instrumentName = #"Flute"
+  } \relative {
+    f''2 g4 f
+}
+  \new Staff \with {
+    instrumentName = \markup {
+      \center-column { "Clarinet"
+        \line { "in B" \smaller \flat }
+      }
     }
-    c4 b c2
-  }
+  } \relative { c''4 b c2 }
 >>
 @end lilypond
 
 @funindex indent
 @funindex short-indent
 
-However, if the instrument names are longer, the instrument names
-in a staff group may not be centered unless the @code{indent} and
-@code{short-indent} settings are increased.  For details about
-these settings, see @ref{\paper variables for shifts and indents}.
+However, if the instrument names are longer, the instrument names in a
+staff group may not be centered unless the @code{indent} and
+@code{short-indent} settings are increased.  For details about these
+settings, see @ref{paper variables for shifts and indents,,@code{@bs{}paper} variables for shifts and indents}.
 
 @lilypond[verbatim,quote,ragged-right]
-\layout {
-  indent = 3.0\cm
-  short-indent = 1.5\cm
-}
-
-\relative c'' <<
-  \new Staff {
-    \set Staff.instrumentName = #"Alto Flute in G"
-    \set Staff.shortInstrumentName = #"Fl."
-    f2 g4 f \break
+<<
+  \new Staff \with {
+    instrumentName = #"Alto Flute in G"
+    shortInstrumentName = #"Flt."
+  } \relative {
+    f''2 g4 f \break
     g4 f g2
   }
-  \new Staff {
-    \set Staff.instrumentName = #"Clarinet"
-    \set Staff.shortInstrumentName = #"Clar."
-    c,4 b c2 \break
+  \new Staff \with {
+    instrumentName = #"Clarinet"
+    shortInstrumentName = #"Clar."
+  } \relative {
+    c''4 b c2 \break
     c2 b4 c
   }
 >>
+
+\layout {
+  indent = 3.0\cm
+  short-indent = 1.5\cm
+}
 @end lilypond
 
 @cindex instrument names, adding to other contexts
 
-To add instrument names to other contexts (such as
-@code{GrandStaff}, @code{ChoirStaff}, or @code{StaffGroup}),
-@code{Instrument_name_engraver} must be added to that context.
-For details, see @ref{Modifying context plug-ins}.
+To add instrument names to other contexts (such as @code{ChordNames} or
+@code{FiguredBass}), @code{Instrument_name_engraver} must be added to
+that context.  For details, see @ref{Modifying context plug-ins}.
 
 @cindex instrument names, changing
 @cindex changing instrument names
 
-Instrument names may be changed in the middle of a piece.
-However, remember that @code{instrumentName} will not be
-displayed in the middle of the piece, as it only appears
-on the first staff:
-
-@lilypond[verbatim,quote,ragged-right,relative=1]
-\set Staff.instrumentName = #"First"
-\set Staff.shortInstrumentName = #"one"
-c1 c c c \break
-c1 c c c \break
-\set Staff.instrumentName = #"Second"
-\set Staff.shortInstrumentName = #"two"
-c1 c c c \break
-c1 c c c \break
-@end lilypond
-
-@cindex instrument switch
-@cindex switching instruments
+The @code{shortInstrumentName} may be changed in the middle of a piece,
+along with other settings as needed for the new instrument.
+However, only the first instance of @code{instrumentName} will be
+printed and subsequent changes will be ignored:
 
-@funindex \addInstrumentDefinition
-@funindex addInstrumentDefinition
-@funindex \instrumentSwitch
-@funindex instrumentSwitch
+@lilypond[verbatim,quote,ragged-right]
+prepPiccolo = <>^\markup \italic { muta in Piccolo }
+
+setPiccolo = {
+  \set Staff.instrumentName = #"Piccolo"
+  \set Staff.shortInstrumentName = #"Picc."
+  \set Staff.midiInstrument = #"piccolo"
+  <>^\markup \bold { Piccolo }
+  \transposition c''
+}
 
-If an instrument @emph{switch} is needed,
-@code{\addInstrumentDefinition} may be used in combination with
-@code{\instrumentSwitch} to create a detailed list of the
-necessary changes for the switch.  The
-@code{\addInstrumentDefinition} command has two arguments: an
-identifying string, and an association list of context properties
-and values to be used for the instrument.  It must be placed in
-the toplevel scope.  @code{\instrumentSwitch} is used in the music
-expression to declare the instrument switch:
+prepFlute = <>^\markup \italic { muta in Flauto }
 
-@lilypond[verbatim,quote,ragged-right]
-\addInstrumentDefinition #"contrabassoon"
-  #`((instrumentTransposition . ,(ly:make-pitch -1 0 0))
-     (shortInstrumentName . "Cbsn.")
-     (clefGlyph . "clefs.F")
-     (middleCPosition . 6)
-     (clefPosition . 2)
-     (instrumentCueName . ,(make-bold-markup "cbsn."))
-     (midiInstrument . "bassoon"))
+setFlute = {
+  \set Staff.instrumentName = #"Flute"
+  \set Staff.shortInstrumentName = #"Flt."
+  \set Staff.midiInstrument = #"flute"
+  <>^\markup \bold { Flute }
+  \transposition c'
+}
 
 \new Staff \with {
-  instrumentName = #"Bassoon"
+  instrumentName = #"Flute"
+  shortInstrumentName = #"Flt."
+  midiInstrument = #"flute"
 }
-\relative c' {
-  \clef tenor
-  \compressFullBarRests
-  c2 g'
-  R1*16
-  \instrumentSwitch "contrabassoon"
-  c,,2 g \break
-  c,1 ~ | c1
+\relative {
+  g'1 g g g \break
+  g1 g \prepPiccolo R R \break
+  \setPiccolo
+  g1 g g g \break
+  g1 g \prepFlute R R \break
+  \setFlute
+  g1 g g g
 }
 @end lilypond
 
 
 @seealso
 Notation Reference:
-@ref{\paper variables for shifts and indents},
+@ref{paper variables for shifts and indents,,@code{@bs{}paper} variables for shifts and indents},
 @ref{Modifying context plug-ins}.
 
 Snippets:
@@ -1015,9 +1019,9 @@ Internals Reference:
 @node Quoting other voices
 @unnumberedsubsubsec Quoting other voices
 
-@cindex cues
-@cindex quoting other voices
-@cindex fragments
+@cindex quote, voices
+@cindex voices, quoting
+@cindex fragments, quoting
 @cindex cue notes
 
 @funindex \addQuote
@@ -1027,208 +1031,327 @@ Internals Reference:
 @funindex \transposition
 @funindex transposition
 
-It is very common for one voice to double some of the music from
-another voice.  For example, the first and second violins may play the
-same notes during a passage of music.  In LilyPond this is accomplished
-by letting one voice @emph{quote} the other voice without having to
-re-enter it.
+It is very common for one voice to use the same notes as those from
+another voice.  For example, first and second violins playing the same
+phrase during a particular passage of the music.  This is done by
+letting one voice @emph{quote} the other, without having to re-enter the
+music all over again for the second voice.
 
-Before a part can be quoted, the @code{\addQuote} command must be used
-to initialize the quoted fragment.  This command must be used in the
-toplevel scope.  The first argument is an identifying string, and the
-second is a music expression:
-
-@example
-flute = \relative c'' @{
-  a4 gis g gis
-@}
-\addQuote "flute" @{ \flute @}
-@end example
+The @code{\addQuote} command, used in the top level scope, defines a
+stream of music from which fragments can be quoted.
 
 The @code{\quoteDuring} command is used to indicate the point where the
 quotation begins.  It is followed by two arguments: the name of the
 quoted voice, as defined with @code{\addQuote}, and a music expression
-that indicates the duration of the quote, usually spacer rests or
-multi-measure rests.  The corresponding music (including all articulations,
-dynamics, markup, etc.) from the quoted voice is inserted into the music
-expression:
+for the duration of the quote.
 
 @lilypond[verbatim,quote]
-flute = \relative c'' {
-  a4 gis g->\f gis^\markup{quoted}
+fluteNotes = \relative {
+  a'4 gis g gis | b4^"quoted" r8 ais\p a4( f)
 }
-\addQuote "flute" { \flute }
 
-\relative c' {
-  c4 cis \quoteDuring #"flute" { s2 }
+oboeNotes = \relative {
+  c''4 cis c b \quoteDuring #"flute" { s1 }
+}
+
+\addQuote "flute" { \fluteNotes }
+
+\score {
+  <<
+    \new Staff \with { instrumentName = "Flute" } \fluteNotes
+    \new Staff \with { instrumentName = "Oboe" } \oboeNotes
+  >>
 }
 @end lilypond
 
-If the music expression used for @code{\quoteDuring} contains
-anything but a spacer rest or multi-measure rest, a polyphonic
-situation is created, which is often not desirable:
+If the music expression used in @code{\quoteDuring} contains notes
+instead of spacer or multimeasure rests then the quote will appear as
+polyphony and may produce unexpected results.
 
 @lilypond[verbatim,quote]
-flute = \relative c'' {
-  a4 gis g gis
+fluteNotes = \relative {
+  a'4 gis g gis | b4^"quoted" r8 ais\p a4( f)
 }
-\addQuote "flute" { \flute }
 
-\relative c' {
-  c4 cis \quoteDuring #"flute" { c4 b }
+oboeNotes = \relative {
+  c''4 cis c b \quoteDuring #"flute" { e4 r8 ais b4 a }
+}
+
+\addQuote "flute" { \fluteNotes }
+
+\score {
+  <<
+    \new Staff \with { instrumentName = "Flute" } \fluteNotes
+    \new Staff \with { instrumentName = "Oboe" } \oboeNotes
+  >>
 }
 @end lilypond
 
-Quotations recognize instrument transposition settings for both
-the source and target instruments if the @code{\transposition}
-command is used.  For details about @code{\transposition}, see
-@ref{Instrument transpositions}.
+If an @code{\unfoldRepeat} command in a music expression is required to
+be printed when using @code{\quoteDuring}, then it too must also contain
+its own @code{\unfoldRepeat} command;
 
 @lilypond[verbatim,quote]
-clarinet = \relative c'' {
-  \transposition bes
-  a4 gis g gis
+fluteNotes = \relative {
+  \repeat volta 2 { a'4 gis g gis }
 }
-\addQuote "clarinet" { \clarinet }
 
-\relative c' {
-  c4 cis \quoteDuring #"clarinet" { s2 }
+oboeNotesDW = \relative {
+  \repeat volta 2 \quoteDuring #"incorrect" { s1 }
+}
+
+oboeNotesW = \relative {
+  \repeat volta 2 \quoteDuring #"correct" { s1 }
 }
-@end lilypond
 
-It is possible to tag quotations with unique names in order to
-process them in different ways.  For details about this procedure,
-see @ref{Using tags}.
 
-It is also possible to adjust which objects from the original voice are quoted
-by changing the @code{quotedEventTypes} property.  By default, its value is
-@code{#'(StreamEvent)}, which means that everything is quoted.  Setting it
-to e.g. @code{#'(note-event rest-event tie-event)} causes lilypond to quote
-only notes, rests and ties, but no articulations, markup or dynamics.
+\addQuote "incorrect" { \fluteNotes }
+
+\addQuote "correct" { \unfoldRepeats \fluteNotes }
+
+\score {
+  \unfoldRepeats
+  <<
+    \new Staff \with { instrumentName = "Flute" }
+    \fluteNotes
+    \new Staff \with { instrumentName = "Oboe (incorrect)" }
+    \oboeNotesDW
+    \new Staff \with { instrumentName = "Oboe (correct)" }
+    \oboeNotesW
+  >>
+}
+@end lilypond
+
+The @code{\quoteDuring} command uses the @code{\transposition} settings
+of both quoted and quoting parts to produce notes for the quoting part
+that have the same sounding pitch as those in the quoted part.
 
 @lilypond[verbatim,quote]
-clarinet = \relative c'' {
-  a4 gis g->\f gis^\markup{quoted}
+clarinetNotes = \relative c'' {
+  \transposition bes
+  \key d \major
+  b4 ais a ais | cis4^"quoted" r8 bis\p b4( f)
 }
-\addQuote "clarinet" { \clarinet }
 
-\relative c' {
-  \set Score.quotedEventTypes = #'(note-event rest-event tie-event)
-  c4 cis \quoteDuring #"clarinet" { s2 }
+oboeNotes = \relative {
+  c''4 cis c b \quoteDuring #"clarinet" { s1 }
 }
-@end lilypond
 
-@snippets
+\addQuote "clarinet" { \clarinetNotes }
 
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
-{quoting-another-voice-with-transposition.ly}
+
+\score {
+  <<
+    \new Staff \with { instrumentName = "Clarinet" } \clarinetNotes
+    \new Staff \with { instrumentName = "Oboe" } \oboeNotes
+  >>
+}
+@end lilypond
 
 @cindex note-event
 @cindex articulation-event
 @cindex dynamic-event
 @cindex rest-event
+@cindex slur-event
+@cindex crescendo-event
 
 @funindex quotedEventTypes
 @funindex quotedCueEventTypes
 
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
-{quoting-another-voice.ly}
+By default quoted music will include all articulations, dynamics,
+markups, etc., in the quoted expression.  It is possible to choose which
+of these objects from the quoted music are displayed by using the
+@code{quotedEventTypes} context property.
+
+@lilypond[verbatim,quote]
+fluteNotes = \relative {
+  a'2 g2 |
+  b4\<^"quoted" r8 ais a4\f( c->)
+ }
+
+oboeNotes = \relative {
+  c''2. b4 |
+  \quoteDuring #"flute" { s1 }
+}
 
+\addQuote "flute" { \fluteNotes }
+
+\score {
+  <<
+    \set Score.quotedEventTypes = #'(note-event articulation-event
+                                     crescendo-event rest-event
+                                     slur-event dynamic-event)
+    \new Staff \with { instrumentName = "Flute" } \fluteNotes
+    \new Staff \with { instrumentName = "Oboe" } \oboeNotes
+  >>
+ }
+@end lilypond
+
+Quotes can also be tagged, see @ref{Using tags}.
 
 @seealso
 Notation Reference:
 @ref{Instrument transpositions},
 @ref{Using tags}.
 
+Installed Files:
+@file{scm/define-event-classes.scm}.
+
 Snippets:
 @rlsr{Staff notation}.
 
 Internals Reference:
+@rinternals{Music classes},
 @rinternals{QuoteMusic},
 @rinternals{Voice}.
 
-
 @knownissues
-
 Only the contents of the first @code{Voice} occurring in an
-@code{\addQuote} command will be considered for quotation, so
-@code{@var{music}} cannot contain @code{\new} and
-@code{\context Voice} statements that would switch to a different
-Voice.
-
-Quoting grace notes is broken and can even cause LilyPond to
-crash.
-
-Quoting nested triplets may result in poor notation.
-
-In earlier versions of LilyPond (pre 2.11), @code{addQuote} was
-written entirely in lower-case letters: @code{\addquote}.
+@code{\addQuote} command will be considered for quotation, so if the music
+expression contains @code{\new} or @code{\context Voice}
+statements, their contents will not be quoted.  Quoting grace notes
+is unsupported and may cause LilyPond to crash whereas quoting nested
+triplets may result in poor notation.
 
 
 @node Formatting cue notes
 @unnumberedsubsubsec Formatting cue notes
 
-@cindex cues
 @cindex cue notes
-@cindex cue notes, formatting
 @cindex fragments
-@cindex quoting other voices
-@cindex cues, formatting
+@cindex cue notes, formatting
+@cindex formatting, cue notes
+@cindex voices, quoting
+
 
 @funindex \cueDuring
 @funindex cueDuring
+@funindex \cueClef
+@funindex cueClef
+@funindex \cueDuringWithClef
+@funindex cueDuringWithClef
 @funindex \quoteDuring
 @funindex quoteDuring
 
-The previous section explains how to create quotations.  The
-@code{\cueDuring} command is a more specialized form of
-@code{\quoteDuring}, being particularly useful for inserting cue
-notes into a part.  The syntax is as follows:
+@cindex notes, smaller
+@cindex smaller notes
+@cindex CueVoice
+
+The simplest way to format cue notes is to explicitly create a
+@code{CueVoice} context within the part.
+
+@lilypond[verbatim]
+\relative {
+  R1
+  <<
+    { e'2\rest r4. e8 }
+    \new CueVoice {
+      \stemUp d'8^"flute" c d e fis2
+    }
+  >>
+  d,4 r a r
+}
+@end lilypond
+
+The @code{\cueClef} command can also be used with an explict
+@code{CueVoice} context if a change of clef is required and will print
+an appropriately sized clef for the cue notes.  The @code{\cueClefUnset}
+command can then be used to switch back to the original clef, again with
+an appropriately sized clef.
+
+@lilypond[verbatim,noragged-right]
+\relative {
+  \clef "bass"
+  R1
+  <<
+    { e'2\rest r4. \cueClefUnset e,8 }
+    \new CueVoice {
+      \cueClef "treble" \stemUp d''8^"flute" c d e fis2
+    }
+  >>
+  d,,4 r a r
+}
+@end lilypond
+
+The @code{\cueClef} and @code{\cueClefUnset} command can also be used
+without a @code{CueVoice} if required.
+
+@lilypond[verbatim,noragged-right]
+\relative {
+  \clef "bass"
+  R1
+  \cueClef "treble"
+  d''8^"flute" c d e fis2
+  \cueClefUnset
+  d,,4 r a r
+}
+@end lilypond
+
+For more complex cue note placement, e.g including transposition, or
+inserting cue notes from multiple music sources the @code{\cueDuring} or
+@code{\cueDuringWithClef} commands can be used.  These are more
+specialized form of @code{\quoteDuring}, see @ref{Quoting other voices}
+in the previous section.
+
+The syntax is:
 
 @example
-\cueDuring #@var{partname} #@var{voice} @var{music}
+\cueDuring #@var{quotename} #@var{direction} #@var{music}
 @end example
 
-This command copies only the notes and rests from the
-corresponding measures from @code{@var{partname}} into a
-@code{CueVoice} context.  The @code{CueVoice} is created
-implicitly, and occurs simultaneously with @code{@var{music}},
-which creates a polyphonic situation.  The @code{@var{voice}}
-argument determines whether the cue notes should be notated as a
-first or second voice; @code{UP} corresponds to the first voice,
-and @code{DOWN} corresponds to the second.
+and
+
+@example
+\cueDuringWithClef #@var{quotename} #@var{direction} #@var{clef} #@var{music}
+@end example
+
+The music from the corresponding measures of the @code{@var{quote name}}
+is added as a @code{CueVoice} context and occurs simultaneously with the
+@code{@var{music}}, which then creates a polyphonic situation.  The
+@code{@var{direction}} takes the argument @code{UP} or @code{DOWN}, and
+corresponds to the first and second voices respectively, determining how
+the cue notes are printed in relation to the other voice.
 
 @lilypond[verbatim,quote]
-oboe = \relative c'' {
-  r2 r8 d16(\f f e g f a)
-  g8 g16 g g2.
+fluteNotes = \relative {
+  r2. c''4 | d8 c d e fis2 | g2 d |
 }
-\addQuote "oboe" { \oboe }
 
-\new Voice \relative c'' {
-  \cueDuring #"oboe" #UP { R1 }
+oboeNotes = \relative c'' {
+  R1
+  <>^\markup \tiny { flute }
+  \cueDuring #"flute" #UP { R1 }
   g2 c,
 }
+
+\addQuote "flute" { \fluteNotes }
+
+\new Staff {
+  \oboeNotes
+}
 @end lilypond
 
 @noindent
-In the above example, the @code{Voice} context had to be
-explicitly declared, or else the entire music expression would
-belong to the @code{CueVoice} context.
+
 
 It is possible to adjust which aspects of the music are quoted with
 @code{\cueDuring} by setting the @code{quotedCueEventTypes}
-property.  Its default value is @code{#'(note-event rest-event
+property.  Its default value is @code{'(note-event rest-event
 tie-event beam-event tuplet-span-event)}, which means that only
 notes, rests, ties, beams and tuplets are quoted, but not
 articulations, dynamic marks, markup etc.
 
+@warning{When a @code{Voice} starts with @code{\cueDuring}, as in the
+following example, the @code{Voice} context must be explicitly declared,
+or else the entire music expression would belong to the @code{CueVoice}
+context.}
+
 @lilypond[verbatim,quote]
-oboe = \relative c'' {
-  r2 r8 d16(\f f e g f a)
+oboeNotes = \relative {
+  r2 r8 d''16(\f f e g f a)
   g8 g16 g g2.
 }
-\addQuote "oboe" { \oboe }
+\addQuote "oboe" { \oboeNotes }
 
 \new Voice \relative c'' {
   \set Score.quotedCueEventTypes = #'(note-event rest-event tie-event
@@ -1239,79 +1362,58 @@ oboe = \relative c'' {
 }
 @end lilypond
 
-Markup can be used to show the name of the quoted instrument.  Also,
-if the cue notes require a change in clef, the original clef should
-be restored at the end of the cue notes.
+Markup can be used to show the name of the quoted instrument.
+If the cue notes require a change in clef,
+this can be done manually but the original clef should also be
+restored manually at the end of the cue notes.
 
 @lilypond[verbatim,quote]
-flute = \relative c'' {
-  r2. c4 d8 c d e fis2 g2 d2
+fluteNotes = \relative {
+  r2. c''4 d8 c d e fis2 g2 d2
 }
-bassoon = \relative c {
+
+bassoonNotes = \relative c {
   \clef bass
   R1
   \clef treble
-  s1*0^\markup { \tiny "flute" }
+  <>^\markup \tiny { flute }
   \cueDuring #"flute" #UP { R1 }
   \clef bass
   g4. b8 d2
 }
-\addQuote "flute" { \flute }
+
+\addQuote "flute" { \fluteNotes }
+
 \new Staff {
-  \bassoon
+  \bassoonNotes
 }
 @end lilypond
 
-@cindex removing cues
-@cindex removing cue notes
-@cindex cue notes, removing
-
-@funindex \killCues
-@funindex killCues
-
-The @code{\killCues} command removes cue notes from a music
-expression, so the same music expression can be used to produce
-the instrument part with cues and the score.  The @code{\killCues}
-command removes only the notes and events that were quoted by
-@code{\cueDuring}.  Other markup associated with cues, such as clef
-changes and a label identifying the source instrument, can be
-tagged for selective inclusion in the score; see @ref{Using tags}.
+Alternatively, the @code{\cueDuringWithClef} function can be used
+instead.  This command takes an extra argument to specify the change of
+clef that needs to be printed for the cue notes but will automatically
+print the original clef once the cue notes have finished.
 
 @lilypond[verbatim,quote]
-flute = \relative c'' {
-  r2. c4 d8 c d e fis2 g2 d2
+fluteNotes = \relative {
+  r2. c''4 d8 c d e fis2 g2 d2
 }
-bassoon = \relative c {
+
+bassoonNotes = \relative c {
   \clef bass
   R1
-  \tag #'part {
-    \clef treble
-    s1*0^\markup { \tiny "flute" }
-  }
-  \cueDuring #"flute" #UP { R1 }
-  \tag #'part \clef bass
+  <>^\markup { \tiny "flute" }
+  \cueDuringWithClef #"flute" #UP #"treble" { R1 }
   g4. b8 d2
 }
-\addQuote "flute" { \flute }
+
+\addQuote "flute" { \fluteNotes }
 
 \new Staff {
-  \bassoon
+  \bassoonNotes
 }
-\new StaffGroup <<
-  \new Staff {
-    \flute
-  }
-  \new Staff {
-    \removeWithTag #'part { \killCues { \bassoon } }
-  }
->>
 @end lilypond
 
-Alternatively, Clef changes and instrument labels can be
-collected into an instrument definition for repeated use, using
-@code{\addInstrumentDefinition} described in
-@ref{Instrument names}.
-
 @funindex \transposedCueDuring
 @funindex transposedCueDuring
 
@@ -1327,13 +1429,14 @@ represent the sound of a concert middle C.  This is useful for
 taking cues from an instrument in a completely different register.
 
 @lilypond[verbatim,quote]
-piccolo = \relative c''' {
+piccoloNotes = \relative {
   \clef "treble^8"
   R1
-  c8 c c e g2
+  c'''8 c c e g2
   c4 g g2
 }
-bassClarinet = \relative c' {
+
+bassClarinetNotes = \relative c' {
   \key d \major
   \transposition bes,
   d4 r a r
@@ -1341,40 +1444,71 @@ bassClarinet = \relative c' {
   d4 r a r
 }
 
-\addQuote "piccolo" { \piccolo }
+\addQuote "piccolo" { \piccoloNotes }
 
 <<
-  \new Staff \piccolo
-  \new Staff \bassClarinet
+  \new Staff \piccoloNotes
+  \new Staff \bassClarinetNotes
 >>
 @end lilypond
 
-@cindex notes, smaller
-@cindex smaller notes
+@cindex removing cue notes
+@cindex cue notes, removing
 
-A @code{CueVoice} context may be created explicitly if notes of a
-smaller size are required, for example to set an alternative
-sequence of notes more suitable for a higher or lower voice.
+@funindex \killCues
+@funindex killCues
 
-@lilypond[verbatim,relative=2]
-\time 12/8
-\key ees \major
-g4 ees8 f4 g8
-\stemDown
-<<
-  { d4. bes4 c8 }
-  \new CueVoice
-  { g'4. f4 ees8 }
+The @code{\killCues} command removes cue notes from a music
+expression, so the same music expression can be used to produce
+the instrument part with cues and the score.  The @code{\killCues}
+command removes only the notes and events that were quoted by
+@code{\cueDuring}.  Other markup associated with cues, such as clef
+changes and a label identifying the source instrument, can be
+tagged for selective inclusion in the score; see @ref{Using tags}.
+
+@lilypond[verbatim,quote]
+fluteNotes = \relative {
+  r2. c''4 d8 c d e fis2 g2 d2
+}
+
+bassoonNotes = \relative c {
+  \clef bass
+  R1
+  \tag #'part {
+    \clef treble
+    <>^\markup \tiny { flute }
+  }
+  \cueDuring #"flute" #UP { R1 }
+  \tag #'part \clef bass
+  g4. b8 d2
+}
+
+\addQuote "flute" { \fluteNotes }
+
+\new Staff {
+  \bassoonNotes
+}
+
+\new StaffGroup <<
+  \new Staff {
+    \fluteNotes
+  }
+  \new Staff {
+    \removeWithTag #'part { \killCues { \bassoonNotes } }
+  }
 >>
-\stemUp
-d2. d2.
 @end lilypond
 
+Alternatively, Clef changes and instrument labels can be
+collected into an instrument definition for repeated use, using
+@code{\addInstrumentDefinition} described in @ref{Instrument names}.
 
 @seealso
 Notation Reference:
+@ref{Quoting other voices},
 @ref{Instrument transpositions},
 @ref{Instrument names},
+@ref{Clef},
 @ref{Musical cues},
 @ref{Using tags}.
 
@@ -1385,9 +1519,10 @@ Internals Reference:
 @rinternals{CueVoice},
 @rinternals{Voice}.
 
-
 @knownissues
-
 Collisions can occur with rests, when using @code{\cueDuring},
-between @code{Voice} and @code{CueVoice} contexts.
+between @code{Voice} and @code{CueVoice} contexts.  When using
+@code{\cueDuringWithClef} or @code{\transposedCueDuring} the extra
+argument required for each case must come after the quote and the
+direction.