X-Git-Url: https://git.donarmstrong.com/?a=blobdiff_plain;ds=sidebyside;f=policy.sgml;h=cb1093fed776e0b89b0800b2ce793c00bdf41ed9;hb=8864aef1c3a1a66c9bd6da01b96417441dbe849a;hp=fa1c39aca19f0e8e051179f648d35f0ebe1304d1;hpb=8fc92535f6ccb673d7afeae1353118151f5186c3;p=debian%2Fdebian-policy.git diff --git a/policy.sgml b/policy.sgml index fa1c39a..cb1093f 100644 --- a/policy.sgml +++ b/policy.sgml @@ -158,6 +158,14 @@ distributed in some other way or is intended for local use only.
+ +
+ udebs (stripped-down binary packages used by the Debian Installer) do
+ not comply with all of the requirements discussed here. See the
+
Essential is defined as the minimal set of functionality that
must be available and usable on the system at all times, even
- when packages are in an unconfigured (but unpacked) state.
+ when packages are in the "Unpacked" state.
Packages are tagged essential for a system using the
Essential control field. The format of the
Essential control field is described in dpkg to stave off boredom on
- the part of a user installing many packages. This means,
- amongst other things, using the --quiet option on
-
@@ -1353,7 +1361,7 @@ zope.
installed together. If
The following targets are required and must be implemented
by
- A package may also provide one or both of the targets - build-arch and build-indep. - The build-arch target, if provided, should + The build-arch target must perform all the configuration and compilation required for producing all architecture-dependant binary packages (those packages for which the body of the Architecture field in debian/control is not all). Similarly, the build-indep - target, if provided, should perform all the configuration + target must perform all the configuration and compilation required for producing all architecture-independent binary packages (those packages for which the body of the Architecture field in debian/control is all). -
- -
- If build-arch or build-indep targets are
- provided in the rules file, the build target
+ The build target
should either depend on those targets or take the same
actions as invoking those targets would perform.
- If one or both of the targets build-arch and
- build-indep are not provided, then invoking
-
The build-arch and build-indep targets must not do anything that might require root privilege. @@ -2171,7 +2162,7 @@ zope.
The architectures we build on and build for are determined
by
- In the
- Indicates that Debian Maintainers may upload this package to
- the Debian archive. The only valid value is yes. If
- the field DM-Upload-Allowed: yes is present in the
- source section of the source control file of the most recent
- version of a package in unstable or experimental, the Debian
- archive will accept uploads of this package signed with a key
- in the Debian Maintainer keyring. See the General
- Resolution
+ Multiline field listing all the packages that can be built from
+ the source package, considering every architecture. The first line
+ of the field value is empty. Each one of the next lines describes
+ one binary package, by listing its name, type, section and priority
+ separated by spaces. Fifth and subsequent space-separated items
+ may be present and parsers must allow them. See the
+
+ Simple field containing a word indicating the type of package: + deb for binary packages and udeb for micro binary + packages. Other types not defined here may be indicated. In + source package control files, the Package-Type field + should be omitted instead of giving it a value of deb, as + this value is assumed for paragraphs lacking this field. +
++ The following fields have been obsoleted and may be found in packages + conforming with previous versions of the Policy. +
+ +
+ Indicates that Debian Maintainers may upload this package to
+ the Debian archive. The only valid value is yes. This
+ field was used to regulate uploads by Debian Maintainers, See the
+ General Resolution
The new package's status is now sane, and recorded as - "unpacked". + "Unpacked".
@@ -4565,7 +4596,7 @@ fi
No attempt is made to unwind after errors during configuration. If the configuration fails, the package is in - a "Failed Config" state, and an error message is generated. + a "Half-Configured" state, and an error message is generated.
@@ -4685,8 +4716,8 @@ fi dependencies on other packages, the package names listed may also include lists of alternative package names, separated by vertical bar (pipe) symbols |. In such a case, - if any one of the alternative packages is installed, that - part of the dependency is considered to be satisfied. + that part of the dependency can be satisfied by any one of + the alternative packages.
@@ -5017,11 +5048,11 @@ Build-Depends: foo [linux-any], bar [any-i386], baz [!linux-any] be unpacked the pre-dependency can be satisfied if the depended-on package is either fully configured, or even if the depended-on - package(s) are only unpacked or in the "Half-Configured" + package(s) are only in the "Unpacked" or the "Half-Configured" state, provided that they have been configured correctly at some point in the past (and not removed or partially removed since). In this case, both the - previously-configured and currently unpacked or + previously-configured and currently "Unpacked" or "Half-Configured" versions must satisfy any version clause in the Pre-Depends field.
@@ -5376,7 +5407,7 @@ Depends: foo-data (>= 1.2-3)To determine the soversion, look at the SONAME of the library, stored in the - ELF SONAME attribute. it is usually of the + ELF SONAME attribute. It is usually of the form name.so.major-version (for example, libz.so.1). The version part is the part which comes after .so., so in that example it @@ -6016,7 +6047,7 @@ Built-Using: grub2 (= 1.99-9), loadlin (= 1.6e-1)
-
- A common example of when a change to the is required is a
- function that takes an enum or struct argument that controls
- what the function does. For example:
+ A common example of when a change to the dependency version
+ is required is a function that takes an enum or struct
+ argument that controls what the function does. For example:
- The shlibs system is an simpler alternative to
+ The shlibs system is a simpler alternative to
the symbols system for declaring dependencies for
shared libraries. It may be more appropriate for C++
libraries and other cases where tracking individual symbols is
@@ -6711,7 +6743,7 @@ Built-Using: grub2 (= 1.99-9), loadlin (= 1.6e-1)
The
+ Packages must not assume the
@@ -8049,33 +8087,28 @@ Reloading description configuration...done.
- Packages which provide the ability to view/show/play,
- compose, edit or print MIME types should register themselves
- as such following the current MIME support policy.
+ Packages which provide programs to view/show/play, compose, edit or
+ print MIME types should register them as such by placing a file in
+
The
- Packages containing such programs must register them
- with
+ A number of other init systems are available now in Debian that
+ can be used in place of
+ Packages may integrate with these replacement init systems by
+ providing implementation-specific configuration information about
+ how and when to start a service or in what order to run certain
+ tasks at boot time. However, any package integrating with other
+ init systems must also be backwards-compatible with
+
+ Packages may integrate with the
+ Because packages shipping upstart jobs may be installed on
+ systems that are not using upstart, maintainer scripts must
+ still use the common
+ Dependency-based boot managers for SysV init scripts, such as
+
- A symbolic link pointing to a compressed file should always
+ A symbolic link pointing to a compressed file (in the sense
+ that it is meant to be uncompressed with
Access to HTML documents
- -
- HTML documents for a package are stored in
-
- The web server should restrict access to the document - tree so that only clients on the same host can read - the documents. If the web server does not support such - access controls, then it should not provide access at - all, or ask about providing access during installation. -
+(Deleted)
The
+
+ Info readers requiring the
@@ -10774,12 +10865,6 @@ END-INFO-DIR-ENTRY
- It also documents the interaction between
-
This manual does not go into detail about the options and usage of the package building and installation tools. It @@ -10789,10 +10874,7 @@ END-INFO-DIR-ENTRY
The utility programs which are provided with
@@ -10812,25 +10894,9 @@ END-INFO-DIR-ENTRY
- The binary package has two main sections. The first part
- consists of various control information files and scripts used
- by
- The second part is an archive containing the files and - directories to be installed. -
- -
- In the future binary packages may also contain other
- components, such as checksums and digital signatures. The
- format for the archive is described in full in the
-
-
- It is usually invoked by hand from the top level of the
- built or unbuilt source directory. It may be invoked with
- no arguments; useful arguments include:
-
- Do not sign the .changes file or the
- source package .dsc file, respectively.
- Invoke sign-command instead of finding
- gpg or pgp on the
- When root privilege is required, invoke the command
- root-command. root-command
- should invoke its first argument as a command, from
- the
- Two types of binary-only build and upload - see
-
- This program is usually called by package-independent
- automatic building scripts such as
-
- It is usually called in the top level of a built source
- tree, and when invoked with no arguments will print out a
- straightforward
- This program is used internally by
-
- This program can be used manually, but is also invoked by
- dpkg-buildpackage or
+ Do not attempt to divert a conffile, as