-#### Contents of the preconfiguration file (for lenny)
+#### Contents of the preconfiguration file (for squeeze)
+### Notes:
+### WiP: not entirely tested and relies on our local proxy 10.0.0.1:9999 atm
+###
### Localization
# Locale sets language and country.
d-i debian-installer/locale string en_US
# Any hostname and domain names assigned from dhcp take precedence over
# values set here. However, setting the values still prevents the questions
# from being shown, even if values come from dhcp.
-d-i netcfg/get_hostname string unassigned-hostname
-d-i netcfg/get_domain string unassigned-domain
+d-i netcfg/get_hostname string neurodebian
+d-i netcfg/invalid_hostname string neurodebian
+# d-i netcfg/get_domain string unassigned-domain
# Disable that annoying WEP key dialog.
-d-i netcfg/wireless_wep string
+# d-i netcfg/wireless_wep string
# The wacky dhcp hostname that some ISPs use as a password of sorts.
-#d-i netcfg/dhcp_hostname string radish
+# d-i netcfg/dhcp_hostname string neurodebian
# If non-free firmware is needed for the network or other hardware, you can
# configure the installer to always try to load it, without prompting. Or
# If you select ftp, the mirror/country string does not need to be set.
#d-i mirror/protocol string ftp
d-i mirror/country string manual
-d-i mirror/http/hostname string http.us.debian.org
+d-i mirror/http/hostname string 10.0.0.1:9999
d-i mirror/http/directory string /debian
-d-i mirror/http/proxy string
+#d-i mirror/http/proxy string
# Suite to install.
-#d-i mirror/suite string testing
+d-i mirror/suite string squeeze
# Suite to use for loading installer components (optional).
#d-i mirror/udeb/suite string testing
# be given in traditional non-devfs format.
# Note: A disk must be specified, unless the system has only one disk.
# For example, to use the first SCSI/SATA hard disk:
-#d-i partman-auto/disk string /dev/sda
+d-i partman-auto/disk string /dev/sda
# In addition, you'll need to specify the method to use.
# The presently available methods are: "regular", "lvm" and "crypto"
-d-i partman-auto/method string lvm
+d-i partman-auto/method string regular
# If one of the disks that are going to be automatically partitioned
# contains an old LVM configuration, the user will normally receive a
# warning. This can be preseeded away...
-d-i partman-lvm/device_remove_lvm boolean true
+#d-i partman-lvm/device_remove_lvm boolean true
# The same applies to pre-existing software RAID array:
-d-i partman-md/device_remove_md boolean true
+#d-i partman-md/device_remove_md boolean true
# And the same goes for the confirmation to write the lvm partitions.
-d-i partman-lvm/confirm boolean true
+#d-i partman-lvm/confirm boolean true
# You can choose one of the three predefined partitioning recipes:
# - atomic: all files in one partition
# If not, you can put an entire recipe into the preconfiguration file in one
# (logical) line. This example creates a small /boot partition, suitable
# swap, and uses the rest of the space for the root partition:
-#d-i partman-auto/expert_recipe string \
-# boot-root :: \
-# 40 50 100 ext3 \
-# $primary{ } $bootable{ } \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ /boot } \
-# . \
-# 500 10000 1000000000 ext3 \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ / } \
-# . \
-# 64 512 300% linux-swap \
-# method{ swap } format{ } \
-# .
+d-i partman-auto/expert_recipe string \
+ boot-root :: \
+ 10000 40000 1000000000 ext3 \
+ $primary{ } $bootable{ } \
+ method{ format } format{ } \
+ use_filesystem{ } filesystem{ ext3 } \
+ label{NEURODEBIAN} \
+ mountpoint{ / } \
+ . \
+ 2048 2048 2048 linux-swap \
+ method{ swap } format{ } \
+ .
# This makes partman automatically partition without confirmation, provided
# that you told it what to do using one of the methods above.
d-i partman/confirm_write_new_label boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
### Base system installation
# Select the initramfs generator used to generate the initrd for 2.6 kernels.
#d-i passwd/make-user boolean false
# Root password, either in clear text
-#d-i passwd/root-password password r00tme
-#d-i passwd/root-password-again password r00tme
+d-i passwd/root-password password neurodebian
+d-i passwd/root-password-again password neurodebian
# or encrypted using an MD5 hash.
#d-i passwd/root-password-crypted password [MD5 hash]
# To create a normal user account.
-#d-i passwd/user-fullname string Debian User
-#d-i passwd/username string debian
+d-i passwd/user-fullname string NeuroDebian User
+d-i passwd/username string brain
# Normal user's password, either in clear text
-#d-i passwd/user-password password insecure
-#d-i passwd/user-password-again password insecure
+d-i passwd/user-password password neurodebian
+d-i passwd/user-password-again password neurodebian
# or encrypted using an MD5 hash.
#d-i passwd/user-password-crypted password [MD5 hash]
# Create the first user with the specified UID instead of the default.
-#d-i passwd/user-uid string 1010
+d-i passwd/user-uid string 1000
+# XXX no gid?
# The user account will be added to some standard initial groups. To
# override that, use this.
-#d-i passwd/user-default-groups string audio cdrom video
+d-i passwd/user-default-groups string audio cdrom floppy video plugdev dip sudo
### Apt setup
# You can choose to install non-free and contrib software.
-#d-i apt-setup/non-free boolean true
-#d-i apt-setup/contrib boolean true
+d-i apt-setup/non-free boolean true
+d-i apt-setup/contrib boolean true
# Uncomment this if you don't want to use a network mirror.
#d-i apt-setup/use_mirror boolean false
# Select which update services to use; define the mirrors to be used.
# Values shown below are the normal defaults.
#d-i apt-setup/services-select multiselect security, volatile
-#d-i apt-setup/security_host string security.debian.org
+d-i apt-setup/security_host string security.debian.org
#d-i apt-setup/volatile_host string volatile.debian.org
+# XXX?
# Additional repositories, local[0-9] available
#d-i apt-setup/local0/repository string \
# http://local.server/debian stable main
#d-i apt-setup/local0/comment string local server
-# Enable deb-src lines
+# XXX our nd?
+#d-i apt-getup/local0/repository string \
+# http://neuro.debian.net/debian data main contrib non-free
+#d-i apt-setup/local0/comment string NeuroDebian data
#d-i apt-setup/local0/source boolean true
+#d-i apt-getup/local1/repository string \
+# http://neuro.debian.net/debian squeeze main contrib non-free
+#d-i apt-setup/local1/comment string NeuroDebian software
+#d-i apt-setup/local1/source boolean true
+
+
# URL to the public key of the local repository; you must provide a key or
# apt will complain about the unauthenticated repository and so the
# sources.list line will be left commented out
-#d-i apt-setup/local0/key string http://local.server/key
+#d-i apt-setup/local0/key string \
+# http://neuro.debian.net/_static/neuro.debian.net.asc
# By default the installer requires that repositories be authenticated
# using a known gpg key. This setting can be used to disable that
### Package selection
#tasksel tasksel/first multiselect standard, web-server
+tasksel tasksel/first multiselect
# If the desktop task is selected, install the kde and xfce desktops
# instead of the default gnome desktop.
#tasksel tasksel/desktop multiselect kde, xfce
# installed, and what software you use. The default is not to report back,
# but sending reports helps the project determine what software is most
# popular and include it on CDs.
-#popularity-contest popularity-contest/participate boolean false
+# ND: popcon installed upon initial boot
+popularity-contest popularity-contest/participate boolean false
### Boot loader installation
# Grub is the default boot loader (for x86). If you want lilo installed
# This one makes grub-installer install to the MBR if it also finds some other
# OS, which is less safe as it might not be able to boot that other OS.
-d-i grub-installer/with_other_os boolean true
+d-i grub-installer/with_other_os boolean false
# Alternatively, if you want to install to a location other than the mbr,
# uncomment and edit these lines:
# reboot into the installed system.
#d-i debian-installer/exit/halt boolean true
# This will power off the machine instead of just halting it.
-#d-i debian-installer/exit/poweroff boolean true
+d-i debian-installer/exit/poweroff boolean true
### Preseeding other packages
# Depending on what software you choose to install, or if things go wrong
# directly, or use the apt-install and in-target commands to easily install
# packages and run commands in the target system.
#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
+#d-i preseed/late_command string wget -O/target/tmp/initial_setup http://git.debian.org/?p=pkg-exppsy/neurodebian.git;a=blob_plain;f=vm/d-i/tools/initial_setup;hb=HEAD; \
+d-i preseed/late_command string wget -O/target/tmp/initial_setup http://head1.hydra.dartmouth.edu/d-i/tools/initial_setup ; \
+ in-target /bin/bash /tmp/initial_setup
+
+# XXX here get/call nd_setupguestos ?
projects / neurodebian.git / blobdiff