#!/usr/bin/perl
-use Test::More tests => 277;
+use Test::More tests => 312;
use strict;
use warnings;
);
test_buildsystem_paths_api($bs, "builddir=../bld/dir, sourcedir=autoconf", \%tmp);
-### Test if all buildsystems can be loaded
-@bs = load_all_buildsystems([ $INC[0] ]);
-@tmp = map { $_->NAME() } @bs;
-ok(@Debian::Debhelper::Dh_Buildsystems::BUILDSYSTEMS >= 1, "some build systems are built in" );
-is_deeply( \@tmp, \@Debian::Debhelper::Dh_Buildsystems::BUILDSYSTEMS, "load_all_buildsystems() loads all built-in buildsystems" );
-
### Test check_auto_buildable() of each buildsystem
sub test_check_auto_buildable {
my $bs=shift;
} elsif (exists $expected->{default}) {
$e = $expected->{default};
}
- if ($e) {
- ok( $bs->check_auto_buildable($step),
- $bs->NAME() . "($config): check_auto_buildable($step)" );
- }
- else {
- ok( ! $bs->check_auto_buildable($step),
- $bs->NAME() . "($config): ! check_auto_buildable($step)" );
- }
+ is( $bs->check_auto_buildable($step), $e,
+ $bs->NAME() . "($config): check_auto_buildable($step) == $e" );
}
}
sourcedir => $tmpdir
);
-$bs{autoconf} = load_buildsystem("autoconf", undef, %tmp);
-$bs{cmake} = load_buildsystem("cmake", undef, %tmp);
-$bs{perl_mm} = load_buildsystem("perl_makemaker", undef, %tmp);
-$bs = load_buildsystem("makefile", undef, %tmp);
+# Test if all buildsystems can be loaded
+@bs = load_all_buildsystems([ $INC[0] ], %tmp);
+@tmp = map { $_->NAME() } @bs;
+ok(@Debian::Debhelper::Dh_Buildsystems::BUILDSYSTEMS >= 1, "some build systems are built in" );
+is_deeply( \@tmp, \@Debian::Debhelper::Dh_Buildsystems::BUILDSYSTEMS, "load_all_buildsystems() loads all built-in buildsystems" );
+
+# check_auto_buildable() fails with numeric 0
+for $bs (@bs) {
+ test_check_auto_buildable($bs, "fails with numeric 0", 0);
+}
-test_check_auto_buildable($bs{autoconf}, "no configure", 0);
-test_check_auto_buildable($bs{cmake}, "no CMakeLists.txt", 0);
-test_check_auto_buildable($bs{perl_mm}, "no Makefile.PL", 0);
-test_check_auto_buildable($bs, "no Makefile", 0);
+%bs = ();
+for $bs (@bs) {
+ $bs{$bs->NAME()} = $bs;
+}
touch "$tmpdir/configure", 0755;
test_check_auto_buildable($bs{autoconf}, "configure", { configure => 1 });
test_check_auto_buildable($bs{cmake}, "CMakeLists.txt", { configure => 1 });
touch "$tmpdir/Makefile.PL";
-test_check_auto_buildable($bs{perl_mm}, "Makefile.PL",
- { configure => 1, install => 1 });
+test_check_auto_buildable($bs{perl_makemaker}, "Makefile.PL", { configure => 1 });
# With Makefile
touch "$builddir/Makefile";
-test_check_auto_buildable($bs, "Makefile", { configure => 0, default => 1 });
+test_check_auto_buildable($bs{makefile}, "Makefile", 1);
test_check_auto_buildable($bs{autoconf}, "configure+Makefile", { configure => 1 });
test_check_auto_buildable($bs{cmake}, "CMakeLists.txt+Makefile", 1);
+touch "$builddir/CMakeCache.txt"; # strong evidence that cmake was run
+test_check_auto_buildable($bs{cmake}, "CMakeCache.txt+Makefile", 2);
# Makefile.PL forces in-source
#(see note in check_auto_buildable() why always 1 here)
unlink "$builddir/Makefile";
touch "$tmpdir/Makefile";
-test_check_auto_buildable($bs{perl_mm}, "Makefile.PL+Makefile", 1);
+test_check_auto_buildable($bs{perl_makemaker}, "Makefile.PL+Makefile", 1);
# Perl Build.PL - handles always
-$bs = load_buildsystem("perl_build", undef, %tmp);
-test_check_auto_buildable($bs, "no Build.PL", 0);
+test_check_auto_buildable($bs{perl_build}, "no Build.PL", 0);
touch "$tmpdir/Build.PL";
-test_check_auto_buildable($bs, "Build.PL", { configure => 1 });
+test_check_auto_buildable($bs{perl_build}, "Build.PL", { configure => 1 });
touch "$tmpdir/Build"; # forced in source
-test_check_auto_buildable($bs, "Build.PL+Build", 1);
+test_check_auto_buildable($bs{perl_build}, "Build.PL+Build", 1);
# Python Distutils
-$bs = load_buildsystem("python_distutils", undef, %tmp);
-test_check_auto_buildable($bs, "no setup.py", 0);
+test_check_auto_buildable($bs{python_distutils}, "no setup.py", 0);
touch "$tmpdir/setup.py";
-test_check_auto_buildable($bs, "setup.py", 1);
+test_check_auto_buildable($bs{python_distutils}, "setup.py", 1);
cleandir($tmpdir);
### Now test if it can autoselect a proper buildsystem for a typical package
sub test_autoselection {
- my $system=shift;
+ my $testname=shift;
my $expected=shift;
+ my %args=@_;
for my $step (@STEPS) {
my $bs = load_buildsystem(undef, $step, @_);
my $e = $expected;
$e = $expected->{$step} if ref $expected;
if (defined $bs) {
- is( $bs->NAME(), $e, "autoselection($system): $step=".((defined $e)?$e:'undef') );
+ is( $bs->NAME(), $e, "autoselection($testname): $step=".((defined $e)?$e:'undef') );
}
else {
- is ( undef, $e, "autoselection($system): $step=".((defined $e)?$e:'undef') );
+ is ( undef, $e, "autoselection($testname): $step=".((defined $e)?$e:'undef') );
}
+ &{$args{"code_$step"}}() if exists $args{"code_$step"};
}
}
+# Auto-select nothing when no supported build system can be found
+# (see #557006).
+test_autoselection("auto-selects nothing", undef, %tmp);
+
# Autoconf
touch "$tmpdir/configure", 0755;
touch "$builddir/Makefile";
# Makefile
touch "$builddir/Makefile";
-test_autoselection("makefile", { build => "makefile", test => "makefile",
- install => "makefile", clean => "makefile" }, %tmp);
+test_autoselection("makefile", "makefile", %tmp);
cleandir $tmpdir;
# Python Distutils
cleandir $tmpdir;
# CMake
+touch "$tmpdir/CMakeLists.txt";
+$tmp = sub {
+ touch "$builddir/Makefile";
+};
+test_autoselection("cmake without CMakeCache.txt",
+ { configure => "cmake", build => "makefile",
+ test => "makefile", install => "makefile", clean => "makefile" }, %tmp,
+ code_configure => $tmp);
+cleandir $tmpdir;
+
+touch "$tmpdir/CMakeLists.txt";
+$tmp = sub {
+ touch "$builddir/Makefile";
+ touch "$builddir/CMakeCache.txt";
+};
+test_autoselection("cmake with CMakeCache.txt",
+ "cmake", %tmp, code_configure => $tmp);
+cleandir $tmpdir;
+
touch "$tmpdir/CMakeLists.txt";
touch "$builddir/Makefile";
-test_autoselection("cmake",
- { configure => "cmake", build => "makefile",
- test => "makefile", install => "makefile", clean => "makefile" }, %tmp);
+test_autoselection("cmake and existing Makefile", "makefile", %tmp);
cleandir $tmpdir;
### Test Buildsystem::rmdir_builddir()
"No parallel by default" );
$ENV{DEB_BUILD_OPTIONS}="parallel=5";
-test_is_parallel( do_parallel_mk(),
+test_isnt_parallel( do_parallel_mk(),
"DEB_BUILD_OPTIONS=parallel=5 without --max-parallel" );
test_is_parallel( do_parallel_mk("--max-parallel=2"),
"DEB_BUILD_OPTIONS=parallel=5 with --max-parallel=2" );
$ENV{MAKEFLAGS} = "--jobserver-fds=105,106 -j";
$ENV{DEB_BUILD_OPTIONS}="";
-test_isnt_parallel( do_parallel_mk(),
+test_isnt_parallel( do_parallel_mk("--max-parallel=5"),
"makefile.pm (no parallel): no make warnings about unavailable jobserver" );
$ENV{DEB_BUILD_OPTIONS}="parallel=5";
-test_is_parallel( do_parallel_mk(),
+test_is_parallel( do_parallel_mk("--max-paralle=5"),
"DEB_BUILD_OPTIONS=parallel=5: no make warnings about unavail parent jobserver" );
$ENV{MAKEFLAGS} = "-j2";
$rules = <<'EOF';
%:
@dh_clean > /dev/null 2>&1
- @dh --buildsystem=makefile --after=dh_auto_configure --until=dh_auto_build $@
+ @dh --buildsystem=makefile --max-parallel=5 --after=dh_auto_configure --until=dh_auto_build $@
@dh_clean > /dev/null 2>&1
EOF
$rules = <<'EOF';
%:
@dh_clean > /dev/null 2>&1
- @dh -j --buildsystem=makefile --after=dh_auto_configure --until=dh_auto_build $@
+ @dh -j --buildsystem=makefile --max-parallel=5 --after=dh_auto_configure --until=dh_auto_build $@
@dh_clean > /dev/null 2>&1
EOF
test_is_parallel( do_rules_for_parallel("build", $rules),
#!/usr/bin/make -f
%:
@dh_clean > /dev/null 2>&1
- @+dh --buildsystem=makefile --after=dh_auto_configure --until=dh_auto_build $@
+ @+dh --buildsystem=makefile --max-parallel=5 --after=dh_auto_configure --until=dh_auto_build $@
@dh_clean > /dev/null 2>&1
EOF
test_is_parallel( do_rules_for_parallel("build", "include debian/rules"),
dh_auto_build
%:
@dh_clean > /dev/null 2>&1
- @+dh --buildsystem=makefile --after=dh_auto_configure --until=dh_auto_build $@
+ @+dh --buildsystem=makefile --max-parallel=5 --after=dh_auto_configure --until=dh_auto_build $@
@dh_clean > /dev/null 2>&1
EOF
test_is_parallel( do_rules_for_parallel("build", "include debian/rules"),
+dh_auto_build
%:
@dh_clean > /dev/null 2>&1
- @+dh --buildsystem=makefile --after=dh_auto_configure --until=dh_auto_build $@
+ @+dh --buildsystem=makefile --max-parallel=5 --after=dh_auto_configure --until=dh_auto_build $@
@dh_clean > /dev/null 2>&1
EOF
test_is_parallel( do_rules_for_parallel("build", "include debian/rules"),
$(MAKE)
%:
@dh_clean > /dev/null 2>&1
- @+dh --buildsystem=makefile --after=dh_auto_configure --until=dh_auto_build $@
+ @+dh --buildsystem=makefile --max-parallel=5 --after=dh_auto_configure --until=dh_auto_build $@
@dh_clean > /dev/null 2>&1
EOF
test_is_parallel( do_rules_for_parallel("build", "include debian/rules"),