#!/usr/bin/perl
-use Test::More tests => 281;
+use Test::More tests => 291;
use strict;
use warnings;
);
test_buildsystem_paths_api($bs, "builddir=../bld/dir, sourcedir=autoconf", \%tmp);
-### Test if all buildsystems can be loaded
-@bs = load_all_buildsystems([ $INC[0] ]);
-@tmp = map { $_->NAME() } @bs;
-ok(@Debian::Debhelper::Dh_Buildsystems::BUILDSYSTEMS >= 1, "some build systems are built in" );
-is_deeply( \@tmp, \@Debian::Debhelper::Dh_Buildsystems::BUILDSYSTEMS, "load_all_buildsystems() loads all built-in buildsystems" );
-
### Test check_auto_buildable() of each buildsystem
sub test_check_auto_buildable {
my $bs=shift;
} elsif (exists $expected->{default}) {
$e = $expected->{default};
}
- if ($e) {
- ok( $bs->check_auto_buildable($step),
- $bs->NAME() . "($config): check_auto_buildable($step)" );
- }
- else {
- ok( ! $bs->check_auto_buildable($step),
- $bs->NAME() . "($config): ! check_auto_buildable($step)" );
- }
+ is( $bs->check_auto_buildable($step), $e,
+ $bs->NAME() . "($config): check_auto_buildable($step) == $e" );
}
}
sourcedir => $tmpdir
);
-$bs{autoconf} = load_buildsystem("autoconf", undef, %tmp);
-$bs{cmake} = load_buildsystem("cmake", undef, %tmp);
-$bs{perl_mm} = load_buildsystem("perl_makemaker", undef, %tmp);
-$bs = load_buildsystem("makefile", undef, %tmp);
+# Test if all buildsystems can be loaded
+@bs = load_all_buildsystems([ $INC[0] ], %tmp);
+@tmp = map { $_->NAME() } @bs;
+ok(@Debian::Debhelper::Dh_Buildsystems::BUILDSYSTEMS >= 1, "some build systems are built in" );
+is_deeply( \@tmp, \@Debian::Debhelper::Dh_Buildsystems::BUILDSYSTEMS, "load_all_buildsystems() loads all built-in buildsystems" );
-test_check_auto_buildable($bs{autoconf}, "no configure", 0);
-test_check_auto_buildable($bs{cmake}, "no CMakeLists.txt", 0);
-test_check_auto_buildable($bs{perl_mm}, "no Makefile.PL", 0);
-test_check_auto_buildable($bs, "no Makefile", 0);
+# check_auto_buildable() fails with numeric 0
+for $bs (@bs) {
+ test_check_auto_buildable($bs, "fails with numeric 0", 0);
+}
+
+%bs = ();
+for $bs (@bs) {
+ $bs{$bs->NAME()} = $bs;
+}
touch "$tmpdir/configure", 0755;
test_check_auto_buildable($bs{autoconf}, "configure", { configure => 1 });
test_check_auto_buildable($bs{cmake}, "CMakeLists.txt", { configure => 1 });
touch "$tmpdir/Makefile.PL";
-test_check_auto_buildable($bs{perl_mm}, "Makefile.PL",
- { configure => 1, install => 1 });
+test_check_auto_buildable($bs{perl_makemaker}, "Makefile.PL", { configure => 1 });
# With Makefile
touch "$builddir/Makefile";
-test_check_auto_buildable($bs, "Makefile", { configure => 0, default => 1 });
+test_check_auto_buildable($bs{makefile}, "Makefile", 1);
test_check_auto_buildable($bs{autoconf}, "configure+Makefile", { configure => 1 });
test_check_auto_buildable($bs{cmake}, "CMakeLists.txt+Makefile", 1);
+touch "$builddir/CMakeCache.txt"; # strong evidence that cmake was run
+test_check_auto_buildable($bs{cmake}, "CMakeCache.txt+Makefile", 2);
# Makefile.PL forces in-source
#(see note in check_auto_buildable() why always 1 here)
unlink "$builddir/Makefile";
touch "$tmpdir/Makefile";
-test_check_auto_buildable($bs{perl_mm}, "Makefile.PL+Makefile", 1);
+test_check_auto_buildable($bs{perl_makemaker}, "Makefile.PL+Makefile", 1);
# Perl Build.PL - handles always
-$bs = load_buildsystem("perl_build", undef, %tmp);
-test_check_auto_buildable($bs, "no Build.PL", 0);
+test_check_auto_buildable($bs{perl_build}, "no Build.PL", 0);
touch "$tmpdir/Build.PL";
-test_check_auto_buildable($bs, "Build.PL", { configure => 1 });
+test_check_auto_buildable($bs{perl_build}, "Build.PL", { configure => 1 });
touch "$tmpdir/Build"; # forced in source
-test_check_auto_buildable($bs, "Build.PL+Build", 1);
+test_check_auto_buildable($bs{perl_build}, "Build.PL+Build", 1);
# Python Distutils
-$bs = load_buildsystem("python_distutils", undef, %tmp);
-test_check_auto_buildable($bs, "no setup.py", 0);
+test_check_auto_buildable($bs{python_distutils}, "no setup.py", 0);
touch "$tmpdir/setup.py";
-test_check_auto_buildable($bs, "setup.py", 1);
+test_check_auto_buildable($bs{python_distutils}, "setup.py", 1);
cleandir($tmpdir);
### Now test if it can autoselect a proper buildsystem for a typical package
sub test_autoselection {
- my $system=shift;
+ my $testname=shift;
my $expected=shift;
+ my %args=@_;
for my $step (@STEPS) {
my $bs = load_buildsystem(undef, $step, @_);
my $e = $expected;
$e = $expected->{$step} if ref $expected;
if (defined $bs) {
- is( $bs->NAME(), $e, "autoselection($system): $step=".((defined $e)?$e:'undef') );
+ is( $bs->NAME(), $e, "autoselection($testname): $step=".((defined $e)?$e:'undef') );
}
else {
- is ( undef, $e, "autoselection($system): $step=".((defined $e)?$e:'undef') );
+ is ( undef, $e, "autoselection($testname): $step=".((defined $e)?$e:'undef') );
}
+ &{$args{"code_$step"}}() if exists $args{"code_$step"};
}
}
+# Auto-select nothing when no supported build system can be found
+# (see #557006).
+test_autoselection("auto-selects nothing", undef, %tmp);
+
# Autoconf
touch "$tmpdir/configure", 0755;
touch "$builddir/Makefile";
# Makefile
touch "$builddir/Makefile";
-test_autoselection("makefile", { build => "makefile", test => "makefile",
- install => "makefile", clean => "makefile" }, %tmp);
+test_autoselection("makefile", "makefile", %tmp);
cleandir $tmpdir;
# Python Distutils
cleandir $tmpdir;
# CMake
+touch "$tmpdir/CMakeLists.txt";
+$tmp = sub {
+ touch "$builddir/Makefile";
+};
+test_autoselection("cmake without CMakeCache.txt",
+ { configure => "cmake", build => "makefile",
+ test => "makefile", install => "makefile", clean => "makefile" }, %tmp,
+ code_configure => $tmp);
+cleandir $tmpdir;
+
+touch "$tmpdir/CMakeLists.txt";
+$tmp = sub {
+ touch "$builddir/Makefile";
+ touch "$builddir/CMakeCache.txt";
+};
+test_autoselection("cmake with CMakeCache.txt",
+ "cmake", %tmp, code_configure => $tmp);
+cleandir $tmpdir;
+
touch "$tmpdir/CMakeLists.txt";
touch "$builddir/Makefile";
-test_autoselection("cmake",
- { configure => "cmake", build => "makefile",
- test => "makefile", install => "makefile", clean => "makefile" }, %tmp);
+test_autoselection("cmake and existing Makefile", "makefile", %tmp);
cleandir $tmpdir;
### Test Buildsystem::rmdir_builddir()
$tmp = Cwd::getcwd();
# NOTE: disabling parallel building explicitly (it might get automatically
# enabled if run under dpkg-buildpackage -jX) to make output deterministic.
-is_deeply( process_stdout("$^X -- - --builddirectory='autoconf/bld dir' --sourcedirectory autoconf --parallel=1",
+is_deeply( process_stdout("$^X -- - --builddirectory='autoconf/bld dir' --sourcedirectory autoconf --max-parallel=1",
get_load_bs_source(undef, "configure")),
[ 'NAME=autoconf', 'builddir=autoconf/bld dir', "cwd=$tmp", 'makecmd=make', 'parallel=1', 'sourcedir=autoconf' ],
"autoconf autoselection and sourcedir/builddir" );
-is_deeply( process_stdout("$^X -- - -Sautoconf -D autoconf --parallel=1", get_load_bs_source("autoconf", "build")),
+is_deeply( process_stdout("$^X -- - -Sautoconf -D autoconf --max-parallel=1", get_load_bs_source("autoconf", "build")),
[ 'NAME=autoconf', 'builddir=undef', "cwd=$tmp", 'makecmd=make', 'parallel=1', 'sourcedir=autoconf' ],
"forced autoconf and sourcedir" );
-is_deeply( process_stdout("$^X -- - -B -Sautoconf --parallel=1", get_load_bs_source("autoconf", "build")),
+is_deeply( process_stdout("$^X -- - -B -Sautoconf --max-parallel=1", get_load_bs_source("autoconf", "build")),
[ 'NAME=autoconf', "builddir=$default_builddir", "cwd=$tmp", 'makecmd=make', 'parallel=1', 'sourcedir=.' ],
"forced autoconf and default build directory" );
#### Test parallel building and related options / routines
@tmp = ( $ENV{MAKEFLAGS}, $ENV{DEB_BUILD_OPTIONS} );
-# Test is_make_jobserver_unavailable and clean_makeflags.
+# Test is_make_jobserver_unavailable and clean_jobserver_makeflags.
$ENV{MAKEFLAGS} = "--jobserver-fds=103,104 -j";
ok(is_make_jobserver_unavailable(), "unavailable jobserver" );
-clean_makeflags();
+clean_jobserver_makeflags();
ok(! exists $ENV{MAKEFLAGS}, "unset makeflags");
$ENV{MAKEFLAGS} = "-a --jobserver-fds=103,104 -j -b";
ok(is_make_jobserver_unavailable(), "unavailable jobserver" );
-clean_makeflags();
+clean_jobserver_makeflags();
is($ENV{MAKEFLAGS}, "-a -b", "clean makeflags");
$ENV{MAKEFLAGS} = " --jobserver-fds=1,2 -j ";
ok(! is_make_jobserver_unavailable(), "available jobserver" );
-clean_makeflags();
+clean_jobserver_makeflags();
ok(! exists $ENV{MAKEFLAGS}, "unset makeflags");
$ENV{MAKEFLAGS} = "-a -j -b";
ok(! is_make_jobserver_unavailable(), "no specified jobserver");
-clean_makeflags();
-is($ENV{MAKEFLAGS}, "-a -b", "clean makeflags");
+clean_jobserver_makeflags();
+is($ENV{MAKEFLAGS}, "-a -j -b", "clean makeflags does not remove -j");
$ENV{MAKEFLAGS} = "-a --jobs -b";
ok(! is_make_jobserver_unavailable(), "no specified jobserver");
-clean_makeflags();
-is($ENV{MAKEFLAGS}, "-a -b", "clean makeflags");
+clean_jobserver_makeflags();
+is($ENV{MAKEFLAGS}, "-a --jobs -b", "clean makeflags does not remove --jobs");
$ENV{MAKEFLAGS} = "-j6";
ok(! is_make_jobserver_unavailable(), "no specified jobserver");
-clean_makeflags();
-ok(! exists $ENV{MAKEFLAGS}, "unset makeflags");
+clean_jobserver_makeflags();
+is($ENV{MAKEFLAGS}, "-j6", "clean makeflags does not remove -j6");
$ENV{MAKEFLAGS} = "-a -j6 --jobs=7";
ok(! is_make_jobserver_unavailable(), "no specified jobserver");
-clean_makeflags();
-is($ENV{MAKEFLAGS}, "-a", "clean makeflags");
+clean_jobserver_makeflags();
+is($ENV{MAKEFLAGS}, "-a -j6 --jobs=7", "clean makeflags does not remove -j or --jobs");
$ENV{MAKEFLAGS} = "-j6 --jobserver-fds=5,6 --jobs=8";
ok(is_make_jobserver_unavailable(), "unavailable jobserver");
-clean_makeflags();
+clean_jobserver_makeflags();
is($ENV{MAKEFLAGS}, "-j6 --jobs=8", "jobserver options removed");
# Test parallel building with makefile build system.
test_isnt_parallel( do_parallel_mk(),
"No parallel by default" );
-test_isnt_parallel( do_parallel_mk("--parallel"),
- "No parallel by default with --parallel" );
$ENV{DEB_BUILD_OPTIONS}="parallel=5";
test_isnt_parallel( do_parallel_mk(),
- "DEB_BUILD_OPTIONS=parallel=5 without --parallel" );
-test_is_parallel( do_parallel_mk("--parallel"),
- "DEB_BUILD_OPTIONS=parallel=5 with --parallel" );
-test_is_parallel( do_parallel_mk("--parallel=2"),
- "DEB_BUILD_OPTIONS=parallel=5 with --parallel=2" );
-test_isnt_parallel( do_parallel_mk("--parallel=1"),
- "DEB_BUILD_OPTIONS=parallel=5 with --parallel=1 (off)" );
+ "DEB_BUILD_OPTIONS=parallel=5 without --max-parallel" );
+test_is_parallel( do_parallel_mk("--max-parallel=2"),
+ "DEB_BUILD_OPTIONS=parallel=5 with --max-parallel=2" );
+test_isnt_parallel( do_parallel_mk("--max-parallel=1"),
+ "DEB_BUILD_OPTIONS=parallel=5 with --max-parallel=1 (off)" );
$ENV{MAKEFLAGS} = "--jobserver-fds=105,106 -j";
$ENV{DEB_BUILD_OPTIONS}="";
-test_isnt_parallel( do_parallel_mk(),
+test_isnt_parallel( do_parallel_mk("--max-parallel=5"),
"makefile.pm (no parallel): no make warnings about unavailable jobserver" );
$ENV{DEB_BUILD_OPTIONS}="parallel=5";
-test_is_parallel( do_parallel_mk("--parallel"),
- "DEB_BUILD_OPTIONS=parallel=5 with --parallel: no make warnings about unavail parent jobserver" );
+test_is_parallel( do_parallel_mk("--max-paralle=5"),
+ "DEB_BUILD_OPTIONS=parallel=5: no make warnings about unavail parent jobserver" );
$ENV{MAKEFLAGS} = "-j2";
$ENV{DEB_BUILD_OPTIONS}="";
-test_is_parallel( do_parallel_mk(),
- "MAKEFLAGS=-j2 without --parallel: dh_auto_build honours MAKEFLAGS" );
-test_isnt_parallel( do_parallel_mk("--parallel=1"),
- "MAKEFLAGS=-j2 with --parallel=1: dh_auto_build enforces -j1" );
+test_isnt_parallel( do_parallel_mk(),
+ "MAKEFLAGS=-j2: dh_auto_build ignores MAKEFLAGS" );
+test_isnt_parallel( do_parallel_mk("--max-parallel=1"),
+ "MAKEFLAGS=-j2 with --max-parallel=1: dh_auto_build enforces -j1" );
# Test dh dpkg-buildpackage -jX detection
sub do_rules_for_parallel {
"make -f - $cmdline 2>&1 >/dev/null", $stdin);
}
-# Simulate dpkg-buildpackage -j5
-doit("ln", "-s", "parallel.mk", "Makefile");
-
-sub test_dh_parallel {
- my $extra_dsc=shift || "";
- my $debian_rules=shift || "";
- my $rules;
- my $tmpfile;
-
- $ENV{MAKEFLAGS} = "-j5";
- $ENV{DEB_BUILD_OPTIONS} = "parallel=5";
-
- # Write debian/rules if requested
- $tmpfile = write_debian_rules($debian_rules);
-
- $rules = <<'EOF';
-%:
- @dh_clean > /dev/null 2>&1
- @dh --buildsystem=makefile --after=dh_auto_configure --until=dh_auto_build $@
- @dh_clean > /dev/null 2>&1
-EOF
- test_is_parallel( do_rules_for_parallel("build", $rules),
- "dh adds --parallel implicitly under dpkg-buildpackage -j5 $extra_dsc");
-
- $ENV{MAKEFLAGS} = "";
- test_isnt_parallel( do_rules_for_parallel("build", $rules),
- "DEB_BUILD_OPTIONS=parallel=5 without MAKEFLAGS=-jX via dh $extra_dsc" );
-
- $ENV{MAKEFLAGS} = "-j5";
- $rules = <<'EOF';
-%:
- @dh_clean > /dev/null 2>&1
- @dh -j1 --buildsystem=makefile --after=dh_auto_configure --until=dh_auto_build $@
- @dh_clean > /dev/null 2>&1
-EOF
- test_isnt_parallel( do_rules_for_parallel("build", $rules),
- "dh -j1 disables implicit parallel under dpkg-buildpackage -j5 $extra_dsc");
+doit("ln", "-sf", "parallel.mk", "Makefile");
- $rules = <<'EOF';
-%:
- @dh_clean > /dev/null 2>&1
- @dh -j --buildsystem=makefile --after=dh_auto_configure --until=dh_auto_build $@
- @dh_clean > /dev/null 2>&1
-EOF
- test_is_parallel( do_rules_for_parallel("build", $rules),
- "dh -j under dpkg-buildpackage -j5 is parallel $extra_dsc");
- $ENV{MAKEFLAGS} = "";
- test_is_parallel( do_rules_for_parallel("build", $rules),
- "dh -j is parallel only with DEB_BUILD_OPTIONS=parallel=5 $extra_dsc");
-
- if (defined $tmpfile) {
- rename($tmpfile, "debian/rules");
- }
- elsif ($debian_rules) {
- unlink("debian/rules");
- }
-}
-
-# dh should pass the same tests with and without overrides
-test_dh_parallel();
-test_dh_parallel("(with overrides)", <<'EOF');
-#!/usr/bin/make -f
-override_dh_auto_build:
- @dh_auto_build -- -f parallel.mk
-EOF
-
-# Test if legacy punctuation hacks (+) work as before
+# Test if dh+override+$(MAKE) legacy punctuation hack work as before
$ENV{MAKEFLAGS} = "-j5";
$ENV{DEB_BUILD_OPTIONS} = "parallel=5";
-$tmp = write_debian_rules(<<'EOF');
-#!/usr/bin/make -f
-%:
- @dh_clean > /dev/null 2>&1
- @+dh --buildsystem=makefile --after=dh_auto_configure --until=dh_auto_build $@
- @dh_clean > /dev/null 2>&1
-EOF
-test_is_parallel( do_rules_for_parallel("build", "include debian/rules"),
- "legacy punctuation hacks: +dh, no override" );
-unlink "debian/rules";
-write_debian_rules(<<'EOF');
-#!/usr/bin/make -f
-override_dh_auto_build:
- dh_auto_build
-%:
- @dh_clean > /dev/null 2>&1
- @+dh --buildsystem=makefile --after=dh_auto_configure --until=dh_auto_build $@
- @dh_clean > /dev/null 2>&1
-EOF
-test_isnt_parallel( do_rules_for_parallel("build", "include debian/rules"),
- "legacy punctuation hacks: +dh, override without +, no parallel, no make warnings" );
-unlink "debian/rules";
-
-write_debian_rules(<<'EOF');
-#!/usr/bin/make -f
-override_dh_auto_build:
- +dh_auto_build
-%:
- @dh_clean > /dev/null 2>&1
- @+dh --buildsystem=makefile --after=dh_auto_configure --until=dh_auto_build $@
- @dh_clean > /dev/null 2>&1
-EOF
-test_is_parallel( do_rules_for_parallel("build", "include debian/rules"),
- "legacy punctuation hacks: +dh, override with +" );
-unlink "debian/rules";
-
-write_debian_rules(<<'EOF');
+$tmp = write_debian_rules(<<'EOF');
#!/usr/bin/make -f
override_dh_auto_build:
$(MAKE)
projects / debhelper.git / blobdiff