included in this script's support.")
(after-line-breaking ,boolean? "Dummy property, used to trigger
callback for @code{after-line-breaking}.")
- (align-dir ,ly:dir? "Which side to align? @code{-1}: left side,
+ (align-dir ,ly:dir? "Which side to align? @w{@code{-1}}: left side,
@code{0}: around center of width, @code{1}: right side.")
(allow-loose-spacing ,boolean? "If set, column can be detached
from main spacing.")
(auto-knee-gap ,ly:dimension? "If a gap is found between note
heads where a horizontal beam fits that is larger than this number,
make a kneed beam.")
+ (automatically-numbered ,boolean? "Should a footnote be automatically
+numbered?")
(average-spacing-wishes ,boolean? "If set, the spacing wishes are
averaged over staves.")
(avoid-note-head ,boolean? "If set, the stem of a chord does not
;;
(c0-position ,integer? "An integer indicating the position of
middle@tie{}C.")
- (circled-tip ,boolean? "Put a circle at start/end of
-hairpins (al/del niente).")
+ (circled-tip ,boolean? "Put a circle at start/@/end of
+hairpins (al/@/del niente).")
(clip-edges ,boolean? "Allow outward pointing beamlets at the
edges of beams?")
(collapse-height ,ly:dimension? "Minimum height of system start
-delimiter. If equal or smaller, the bracket/brace/line is removed.")
+delimiter. If equal or smaller, the bracket/@/brace/@/line is removed.")
(collision-interfaces ,list? "A list of interfaces for which
automatic beam-collision resolution is run.")
(collision-voice-only ,boolean? "Does automatic beam collsion apply
having a @code{details} property.")
(digit-names ,vector? "Names for string finger digits.")
(direction ,ly:dir? "If @code{side-axis} is @code{0} (or
-@code{#X}), then this property determines whether the object is placed
-@code{#LEFT}, @code{#CENTER} or @code{#RIGHT} with respect to the
+@code{X}), then this property determines whether the object is placed
+@code{LEFT}, @code{CENTER} or @code{RIGHT} with respect to the
other object. Otherwise, it determines whether the object is placed
-@code{#UP}, @code{#CENTER} or @code{#DOWN}. Numerical values may also
-be used: @code{#UP}=@code{1}, @code{#DOWN}=@code{-1},
-@code{#LEFT}=@code{-1}, @code{#RIGHT}=@code{1},
-@code{#CENTER}=@code{0}.")
+@code{UP}, @code{CENTER} or @code{DOWN}. Numerical values may also
+be used: @code{UP}=@code{1}, @code{DOWN}=@w{@code{-1}},
+@code{LEFT}=@w{@code{-1}}, @code{RIGHT}=@code{1},
+@code{CENTER}=@code{0}.")
(dot-count ,integer? "The number of dots.")
(dot-negative-kern ,number? "The space to remove between a dot
and a slash in percent repeat glyphs. Larger values bring the two
the vertical edges: @code{(@var{left-height} . @var{right-height})}.")
(edge-text ,pair? "A pair specifying the texts to be set at the
edges: @code{(@var{left-text} . @var{right-text})}.")
+ (elements-filtered ,boolean? "Callback to filter an element list.")
(round-up-exceptions ,list? "A list of pairs where car is the numerator
and cdr the denominator of a moment. Each pair in this list means that
the multi-measure rests of the corresponding length will be rounded up to
;;
;; f
;;
- (flag ,ly:stencil? "A function returning the full flag stencil
-for the @code{Stem}, which is passed to the function as the only
-argument. The default ly:stem::calc-stencil function uses the
-@code{flag-style} property to determine the correct glyph for the
-flag. By providing your own function, you can create arbitrary
-flags.")
(flag-count ,number? "The number of tremolo beams.")
- (flag-style ,symbol? "A symbol determining what style of flag
-glyph is typeset on a @code{Stem}. Valid options include @code{'()}
-for standard flags, @code{'mensural} and @code{'no-flag}, which
-switches off the flag.")
(font-encoding ,symbol? "The font encoding is the broadest
category for selecting a font. Currently, only lilypond's system
fonts (Emmentaler) are using this property. Available
include @code{upright}, @code{italic}, @code{caps}.")
(font-size ,number? "The font size, compared to the
@q{normal}@tie{}size. @code{0}@tie{}is style-sheet's normal size,
-@code{-1} is smaller, @code{+1} is bigger. Each step of@tie{}1 is
+@w{@code{-1}} is smaller, @code{+1} is bigger. Each step of@tie{}1 is
approximately 12% larger; 6@tie{}steps are exactly a factor@tie{}2
larger. Fractional values are allowed.")
(footnote-text ,markup? "A footnote for the grob.")
Default@tie{}0.
@item
@code{label-dir} -- Side to which the fret label is attached.
-@code{-1}, @code{#LEFT}, or @code{#DOWN} for left or down; @code{1},
-@code{#RIGHT}, or @code{#UP} for right or up. Default @code{#RIGHT}.
+@w{@code{-1}}, @code{LEFT}, or @code{DOWN} for left or down; @code{1},
+@code{RIGHT}, or @code{UP} for right or up. Default @code{RIGHT}.
@item
@code{mute-string} -- Character string to be used to indicate muted
string. Default @code{\"x\"}.
;;
(gap ,ly:dimension? "Size of a gap in a variable symbol.")
(gap-count ,integer? "Number of gapped beams for tremolo.")
+ (glissando-skip ,boolean? "Should this @code{NoteHead} be skipped
+by glissandi?")
(glyph ,string? "A string determining what @q{style} of glyph is
typeset. Valid choices depend on the function that is reading this
property.")
@itemize @bullet
@item
-@code{box-offset} -- Vertical shift of the center of flat/sharp pedal
-boxes above/below the horizontal line. Default value@tie{}0.8.
+@code{box-offset} -- Vertical shift of the center of flat/@/sharp pedal
+boxes above/@/below the horizontal line. Default value@tie{}0.8.
@item
@code{box-width} -- Width of each pedal box. Default value@tie{}0.4.
@item
objects with progressively higher values are drawn, so objects with
higher values overwrite objects with lower values. By default most
objects are assigned a layer value of 1.")
+ (ledger-extra ,ly:dimension? "Extra distance from staff line to draw ledger
+lines for.")
(ledger-line-thickness ,number-pair? "The thickness of ledger
lines. It is the sum of 2@tie{}numbers: The first is the factor for
line thickness, and the second for staff space. Both contributions
are added.")
+ (ledger-positions ,list? "Repeating pattern for the vertical positions
+of ledger lines. Bracketed groups are always shown together.")
(left-bound-info ,list? "An alist of properties for determining
attachments of spanners to edges.")
(left-padding ,ly:dimension? "The amount of space that is put
interesting items.")
(remove-first ,boolean? "Remove the first staff of an orchestral
score?")
+ (replacement-alist ,list? "Alist of strings.
+The key is a string of the pattern to be replaced. The value is a
+string of what should be displayed. Useful for ligatures.")
(restore-first ,boolean? "Print a natural before the
accidental.")
(rhythmic-location ,rhythmic-location? "Where (bar number,
(right-padding ,ly:dimension? "Space to insert on the right side
of an object (e.g., between note and its accidentals).")
(rotation ,list? "Number of degrees to rotate this object, and
-what point to rotate around. For example, @code{#'(45 0 0)} rotates
+what point to rotate around. For example, @code{'(45 0 0)} rotates
by 45 degrees around the center of this object.")
(round-up-to-longer-rest ,boolean? "Displays the longer multi-measure
rest when the length of a measure is between two values of
(script-priority ,number? "A sorting key that determines in what
order a script is within a stack of scripts.")
(self-alignment-X ,number? "Specify alignment of an object. The
-value @code{-1} means left aligned, @code{0}@tie{}centered, and
+value @w{@code{-1}} means left aligned, @code{0}@tie{}centered, and
@code{1}@tie{}right-aligned in X@tie{}direction. Other numerical
values may also be specified.")
(self-alignment-Y ,number? "Like @code{self-alignment-X} but for
shortest note playing here.")
(shortest-starter-duration ,ly:moment? "The duration of the
shortest note that starts here.")
- (side-axis ,number? "If the value is @code{#X} (or
+ (side-axis ,number? "If the value is @code{X} (or
equivalently@tie{}@code{0}), the object is placed horizontally next to
-the other object. If the value is @code{#Y} or@tie{}@code{1}, it is
+the other object. If the value is @code{Y} or@tie{}@code{1}, it is
placed vertically.")
(side-relative-direction ,ly:dir? "Multiply direction of
@code{direction-source} with this to get the direction of this
override:
@example
-\\override MultiMeasureRest #'spacing-pair = #'(staff-bar . staff-bar)
+\\override MultiMeasureRest
+ #'spacing-pair = #'(staff-bar . staff-bar)
@end example")
(spanner-id ,string? "An identifier to distinguish concurrent spanners.")
(springs-and-rods ,boolean? "Dummy variable for triggering
structure.")
(stem-attachment ,number-pair? "An @code{(@var{x} . @var{y})}
pair where the stem attaches to the notehead.")
- (stem-begin-position ,number? "Where does the stem begin (the
-position of the support-head)?")
- (stem-end-position ,number? "Where does the stem end (the end is
-opposite to the support-head)?")
+ (stem-begin-position ,number? "User override for the
+begin position of a stem.")
;;[TODO: doco]
(stem-spacing-correction ,number? "Optical correction amount for
stems that are placed in tight configurations. For opposite
@var{dir})} pairs, indicating the desired tie configuration, where
@var{position} is the offset from the center of the staff in staff
space and @var{dir} indicates the direction of the tie
-(@code{1}=>up, @code{-1}=>down, @code{0}=>center). A non-pair entry
+(@code{1}=>up, @w{@code{-1}}=>down, @code{0}=>center). A non-pair entry
in the list causes the corresponding tie to be formatted
automatically.")
(to-barline ,boolean? "If true, the spanner will stop at the bar
(X-extent ,number-pair? "Hard coded extent in X@tie{}direction.")
(X-offset ,number? "The horizontal amount that this object is
moved relative to its X-parent.")
+ (X-positions ,number-pair? "Pair of X staff coordinates of a spanner
+in the form @code{(@var{left} . @var{right})}, where both @var{left} and
+@var{right} are in @code{staff-space} units of the current staff.")
;;
(bars ,ly:grob-array? "An array of bar line pointers.")
(beam ,ly:grob? "A pointer to the beam, if applicable.")
+ (bound-alignment-interfaces ,list "Interfaces to be used
+for positioning elements that align with a column.")
(bounded-by-me ,ly:grob-array? "An array of spanners that have this
-column as start/begin point. Only columns that have grobs or act as
+column as start/@/begin point. Only columns that have grobs or act as
bounds are spaced.")
(bracket ,ly:grob? "The bracket for a number.")
in addition to notes and stems.")
(figures ,ly:grob-array? "Figured bass objects for continuation line.")
+ (flag ,ly:grob? "A pointer to a @code{Flag} object.")
(glissando-index ,integer? "The index of a glissando in its note
column.")
(spanner-broken ,boolean? "Indicates whether spanner
alignment should be broken after the current spanner.")
(spanner-placement ,ly:dir? "The place of an annotation on a spanner.
-LEFT is for the first spanner, and RIGHT is for the last. CENTER will
-place it on the broken spanner that falls closest to the center of the length
-of the entire spanner, although this behavior is unpredictable in situations
-with lots of rhythmic diversity. For predictable results, use LEFT and RIGHT.")
+@code{LEFT} is for the first spanner, and @code{RIGHT} is for the last.
+@code{CENTER} will place it on the broken spanner that falls closest to the
+center of the length of the entire spanner, although this behavior is
+unpredictable in situations with lots of rhythmic diversity. For predictable
+results, use @code{LEFT} and @code{RIGHT}.")
(staff-grouper ,ly:grob? "The staff grouper we belong to.")
(staff-symbol ,ly:grob? "The staff symbol grob that we are in.")
(stem ,ly:grob? "A pointer to a @code{Stem} object.")
(cavum ,boolean? "Is this neume outlined?")
(context-info ,integer? "Within a ligature, the final glyph or shape of
-a head may be affected by the left and/or right neighbour head.
+a head may be affected by the left and/@/or right neighbour head.
@code{context-info} holds for each head such information about the left and
right neighbour, encoded as a bit mask.")