#define ROW2COL 1
#define CUSTOM_MATRIX 2 /* Disables built-in matrix scanning code */
+// useful for direct pin mapping
+#define NO_PIN (~0)
+
#ifdef __AVR__
#ifndef __ASSEMBLER__
#include <avr/io.h>
#define PINC_ADDRESS 0x3
#define PINB_ADDRESS 0x6
#define PINA_ADDRESS 0x9
+ #elif defined(__AVR_ATmega328P__)
+ #define ADDRESS_BASE 0x00
+ #define PINB_ADDRESS 0x3
+ #define PINC_ADDRESS 0x6
+ #define PIND_ADDRESS 0x9
#else
#error "Pins are not defined"
#endif
#endif
#elif defined(PROTOCOL_CHIBIOS)
+ // Defines mapping for Proton C replacement
+ #ifdef CONVERT_TO_PROTON_C
+ // Left side (front)
+ #define D3 PAL_LINE(GPIOA, 9)
+ #define D2 PAL_LINE(GPIOA, 10)
+ // GND
+ // GND
+ #define D1 PAL_LINE(GPIOB, 7)
+ #define D0 PAL_LINE(GPIOB, 6)
+ #define D4 PAL_LINE(GPIOB, 5)
+ #define C6 PAL_LINE(GPIOB, 4)
+ #define D7 PAL_LINE(GPIOB, 3)
+ #define E6 PAL_LINE(GPIOB, 2)
+ #define B4 PAL_LINE(GPIOB, 1)
+ #define B5 PAL_LINE(GPIOB, 0)
+
+ // Right side (front)
+ // RAW
+ // GND
+ // RESET
+ // VCC
+ #define F4 PAL_LINE(GPIOA, 2)
+ #define F5 PAL_LINE(GPIOA, 1)
+ #define F6 PAL_LINE(GPIOA, 0)
+ #define F7 PAL_LINE(GPIOB, 8)
+ #define B1 PAL_LINE(GPIOB, 13)
+ #define B3 PAL_LINE(GPIOB, 14)
+ #define B2 PAL_LINE(GPIOB, 15)
+ #define B6 PAL_LINE(GPIOB, 9)
+
+ // LEDs (only D5/C13 uses an actual LED)
+ #ifdef CONVERT_TO_PROTON_C_RXLED
+ #define D5 PAL_LINE(GPIOC, 13)
+ #define B0 PAL_LINE(GPIOC, 13)
+ #else
+ #define D5 PAL_LINE(GPIOC, 13)
+ #define B0 PAL_LINE(GPIOC, 14)
+ #endif
+ #else
#define A0 PAL_LINE(GPIOA, 0)
#define A1 PAL_LINE(GPIOA, 1)
#define A2 PAL_LINE(GPIOA, 2)
#define B13 PAL_LINE(GPIOB, 13)
#define B14 PAL_LINE(GPIOB, 14)
#define B15 PAL_LINE(GPIOB, 15)
+ #define B16 PAL_LINE(GPIOB, 16)
+ #define B17 PAL_LINE(GPIOB, 17)
#define C0 PAL_LINE(GPIOC, 0)
#define C1 PAL_LINE(GPIOC, 1)
#define C2 PAL_LINE(GPIOC, 2)
#define F13 PAL_LINE(GPIOF, 13)
#define F14 PAL_LINE(GPIOF, 14)
#define F15 PAL_LINE(GPIOF, 15)
+ #endif
#endif
/* USART configuration */