Copyright © 1996,1997,1998 Ian Jackson
and Christian Schwarz.
</copyrightsummary>
+ <p>
+ These are the copyright dates of the original Policy manual.
+ Since then, this manual has been updated by many others. No
+ comprehensive collection of copyright notices for subsequent
+ work exists.
+ </p>
+
<p>
This manual is free software; you may redistribute it and/or
modify it under the terms of the GNU General Public License
is used by, a significant number of packages, and
therefore should not be changed without peer
review. Package maintainers can then rely on this
- interfaces not changing, and the package
- management software authors need to ensure
- compatibility with these interface
- definitions. (Control file and changelog file
- formats are examples.)
+ interface not changing, and the package management
+ software authors need to ensure compatibility with
+ this interface definition. (Control file and
+ changelog file formats are examples.)
</item>
<tag>Chosen Convention</tag>
<item>
system, but not every package we want to make accessible is
<em>free</em> in our sense (see the Debian Free Software
Guidelines, below), or may be imported/exported without
- restrictions. Thus, the archive is split into the distribution
- areas or categories based on their licenses and other restrictions.
+ restrictions. Thus, the archive is split into areas<footnote>
+ The Debian archive software uses the term "component" internally
+ and in the Release file format to refer to the division of an
+ archive. The Debian Social Contract simply refers to "areas."
+ This document uses terminology similar to the Social Contract.
+ </footnote> based on their licenses and other restrictions.
</p>
<p>
</p>
<p>
- The <em>main</em> category forms the
- <em>Debian GNU/Linux distribution</em>.
+ The <em>main</em> archive area forms the <em>Debian GNU/Linux
+ distribution</em>.
</p>
<p>
- Packages in the other distribution areas (<tt>contrib</tt>,
+ Packages in the other archive areas (<tt>contrib</tt>,
<tt>non-free</tt>) are not considered to be part of the Debian
distribution, although we support their use and provide
infrastructure for them (such as our bug-tracking system and
The Debian Free Software Guidelines (DFSG) form our
definition of "free software". These are:
<taglist>
- <tag>Free Redistribution
+ <tag>1. Free Redistribution
</tag>
<item>
The license of a Debian component may not restrict any
sources. The license may not require a royalty or
other fee for such sale.
</item>
- <tag>Source Code
+ <tag>2. Source Code
</tag>
<item>
The program must include source code, and must allow
distribution in source code as well as compiled form.
</item>
- <tag>Derived Works
+ <tag>3. Derived Works
</tag>
<item>
The license must allow modifications and derived
works, and must allow them to be distributed under the
same terms as the license of the original software.
</item>
- <tag>Integrity of The Author's Source Code
+ <tag>4. Integrity of The Author's Source Code
</tag>
<item>
The license may restrict source-code from being
Project encourages all authors to not restrict any
files, source or binary, from being modified.)
</item>
- <tag>No Discrimination Against Persons or Groups
+ <tag>5. No Discrimination Against Persons or Groups
</tag>
<item>
The license must not discriminate against any person
or group of persons.
</item>
- <tag>No Discrimination Against Fields of Endeavor
+ <tag>6. No Discrimination Against Fields of Endeavor
</tag>
<item>
The license must not restrict anyone from making use
used in a business, or from being used for genetic
research.
</item>
- <tag>Distribution of License
+ <tag>7. Distribution of License
</tag>
<item>
The rights attached to the program must apply to all
for execution of an additional license by those
parties.
</item>
- <tag>License Must Not Be Specific to Debian
+ <tag>8. License Must Not Be Specific to Debian
</tag>
<item>
The rights attached to the program must not depend on
rights as those that are granted in conjunction with
the Debian system.
</item>
- <tag>License Must Not Contaminate Other Software
+ <tag>9. License Must Not Contaminate Other Software
</tag>
<item>
The license must not place restrictions on other
that all other programs distributed on the same medium
must be free software.
</item>
- <tag>Example Licenses
+ <tag>10. Example Licenses
</tag>
<item>
The "GPL," "BSD," and "Artistic" licenses are examples of
</sect>
<sect id="sections">
- <heading>Categories</heading>
+ <heading>Archive areas</heading>
<sect1 id="main">
- <heading>The main category</heading>
+ <heading>The main archive area</heading>
<p>
Every package in <em>main</em> must comply with the DFSG
</sect1>
<sect1 id="contrib">
- <heading>The contrib category</heading>
+ <heading>The contrib archive area</heading>
<p>
Every package in <em>contrib</em> must comply with the DFSG.
</sect1>
<sect1 id="non-free">
- <heading>The non-free category</heading>
+ <heading>The non-free archive area</heading>
<p>
Packages must be placed in <em>non-free</em> if they are
<heading>Copyright considerations</heading>
<p>
- Every package must be accompanied by a verbatim copy of
- its copyright and distribution license in the file
+ Every package must be accompanied by a verbatim copy of its
+ copyright information and distribution license in the file
<file>/usr/share/doc/<var>package</var>/copyright</file>
(see <ref id="copyrightfile"> for further details).
</p>
<heading>Sections</heading>
<p>
- The packages in the categories <em>main</em>,
- <em>contrib</em> and <em>non-free</em> are grouped further
- into <em>sections</em> to simplify handling.
+ The packages in the archive areas <em>main</em>,
+ <em>contrib</em> and <em>non-free</em> are grouped further into
+ <em>sections</em> to simplify handling.
</p>
<p>
- The category and section for each package should be
- specified in the package's <tt>Section</tt> control record
- (see <ref id="f-Section">). However, the maintainer of the
- Debian archive may override this selection to ensure the
- consistency of the Debian distribution. The
- <tt>Section</tt> field should be of the form:
+ The archive area and section for each package should be
+ specified in the package's <tt>Section</tt> control record (see
+ <ref id="f-Section">). However, the maintainer of the Debian
+ archive may override this selection to ensure the consistency of
+ the Debian distribution. The <tt>Section</tt> field should be
+ of the form:
<list compact="compact">
<item>
<em>section</em> if the package is in the
- <em>main</em> category,
+ <em>main</em> archive area,
</item>
<item>
- <em>segment/section</em> if the package is in
+ <em>area/section</em> if the package is in
the <em>contrib</em> or <em>non-free</em>
- distribution areas.
+ archive areas.
</item>
</list>
</p>
<p>
The Debian archive maintainers provide the authoritative
list of sections. At present, they are:
- <em>admin</em>, <em>comm</em>,
- <em>devel</em>, <em>doc</em>,
- <em>editors</em>, <em>electronics</em>, <em>embedded</em>,
- <em>games</em>, <em>gnome</em>, <em>graphics</em>,
- <em>hamradio</em>, <em>interpreters</em>, <em>kde</em>,
- <em>libs</em>, <em>libdevel</em>, <em>mail</em>,
- <em>math</em>, <em>misc</em>, <em>net</em>, <em>news</em>,
- <em>oldlibs</em>,
- <em>otherosfs</em>, <em>perl</em>, <em>python</em>,
- <em>science</em>, <em>shells</em>,
- <em>sound</em>, <em>tex</em>, <em>text</em>,
- <em>utils</em>, <em>web</em>, <em>x11</em>.
+ <em>admin</em>, <em>cli-mono</em>, <em>comm</em>, <em>database</em>,
+ <em>devel</em>, <em>debug</em>, <em>doc</em>, <em>editors</em>,
+ <em>electronics</em>, <em>embedded</em>, <em>fonts</em>,
+ <em>games</em>, <em>gnome</em>, <em>graphics</em>, <em>gnu-r</em>,
+ <em>gnustep</em>, <em>hamradio</em>, <em>haskell</em>,
+ <em>httpd</em>, <em>interpreters</em>, <em>java</em>, <em>kde</em>,
+ <em>kernel</em>, <em>libs</em>, <em>libdevel</em>, <em>lisp</em>,
+ <em>localization</em>, <em>mail</em>, <em>math</em>, <em>misc</em>,
+ <em>net</em>, <em>news</em>, <em>ocaml</em>, <em>oldlibs</em>,
+ <em>otherosfs</em>, <em>perl</em>, <em>php</em>, <em>python</em>,
+ <em>ruby</em>, <em>science</em>, <em>shells</em>, <em>sound</em>,
+ <em>tex</em>, <em>text</em>, <em>utils</em>, <em>vcs</em>,
+ <em>video</em>, <em>web</em>, <em>x11</em>, <em>xfce</em>,
+ <em>zope</em>. The additional section <em>debian-installer</em>
+ contains special packages used by the installer and is not used
+ for normal Debian packages.
+ </p>
+
+ <p>
+ For more information about the sections and their definitions,
+ see the <url id="http://packages.debian.org/unstable/"
+ name="list of sections in unstable">.
</p>
</sect>
with required, important, standard or optional
priorities, or are only likely to be useful if you
already know what they are or have specialized
- requirements.
+ requirements (such as packages containing only detached
+ debugging symbols).
</item>
</taglist>
</p>
(see below), and should not do so unless they depend on a
particular version of that package.<footnote>
<p>
- Essential is defined as the minimal set of functionality
- that must be available and usable on the system even
- when packages are in an unconfigured (but unpacked)
- state. This is needed to avoid unresolvable dependency
- loops on upgrade. If packages add unnecessary
- dependencies on packages in this set, the chances that
- there <strong>will</strong> be an unresolvable
- dependency loop caused by forcing these Essential
- packages to be configured first before they need to be
- is greatly increased. It also increases the chances
- that frontends will be unable to
- <strong>calculate</strong> an upgrade path, even if one
- exists.
+ Essential is needed in part to avoid unresolvable dependency
+ loops on upgrade. If packages add unnecessary dependencies
+ on packages in this set, the chances that there
+ <strong>will</strong> be an unresolvable dependency loop
+ caused by forcing these Essential packages to be configured
+ first before they need to be is greatly increased. It also
+ increases the chances that frontends will be unable to
+ <strong>calculate</strong> an upgrade path, even if one
+ exists.
</p>
<p>
- Also, it's pretty unlikely that functionality from
- Essential shall ever be removed (which is one reason why
- care must be taken before adding to the Essential
- packages set), but <em>packages</em> have been removed
- from the Essential set when the functionality moved to a
- different package. So depending on these packages
- <em>just in case</em> they stop being essential does way
- more harm than good.
+ Also, functionality is rarely ever removed from the
+ Essential set, but <em>packages</em> have been removed from
+ the Essential set when the functionality moved to a
+ different package. So depending on these packages <em>just
+ in case</em> they stop being essential does way more harm
+ than good.
</p>
</footnote>
</p>
<heading>Essential packages</heading>
<p>
- Some packages are tagged <tt>essential</tt> for a system
- using the <tt>Essential</tt> control file field.
- The format of the <tt>Essential</tt> control field is
- described in <ref id="f-Essential">.
+ Essential is defined as the minimal set of functionality that
+ must be available and usable on the system at all times, even
+ when packages are in an unconfigured (but unpacked) state.
+ Packages are tagged <tt>essential</tt> for a system using the
+ <tt>Essential</tt> control file field. The format of the
+ <tt>Essential</tt> control field is described in <ref
+ id="f-Essential">.
</p>
<p>
appropriate.
</p>
+ <p>
+ Maintainers should take great care in adding any programs,
+ interfaces, or functionality to <tt>essential</tt> packages.
+ Packages may assume that functionality provided by
+ <tt>essential</tt> packages is always available without
+ declaring explicit dependencies, which means that removing
+ functionality from the Essential set is very difficult and is
+ almost never done. Any capability added to an
+ <tt>essential</tt> package therefore creates an obligation to
+ support that capability as part of the Essential set in
+ perpetuity.
+ </p>
+
<p>
You must not tag any packages <tt>essential</tt> before
this has been discussed on the <tt>debian-devel</tt>
<heading>Prompting in maintainer scripts</heading>
<p>
Package maintainer scripts may prompt the user if
- necessary. Prompting should be done by communicating
+ necessary. Prompting must be done by communicating
through a program, such as <prgn>debconf</prgn>, which
- conforms to the Debian Configuration management
- specification, version 2 or higher. Prompting the user by
- other means, such as by hand<footnote>
- From the Jargon file: by hand 2. By extension,
- writing code which does something in an explicit or
- low-level way for which a presupplied library
- (<em>debconf, in this instance</em>) routine ought
- to have been available.
- </footnote>, is now deprecated.
+ conforms to the Debian Configuration Management
+ Specification, version 2 or higher.
+ </p>
+
+ <p>
+ Packages which are essential, or which are dependencies of
+ essential packages, may fall back on another prompting method
+ if no such interface is available when they are executed.
</p>
<p>
- The Debian Configuration management specification is included
+ The Debian Configuration Management Specification is included
in the <file>debconf_specification</file> files in the
<package>debian-policy</package> package.
It is also available from the Debian web mirrors at
</p>
<p>
- Packages which use the Debian Configuration management
- specification may contain an additional
+ Packages which use the Debian Configuration Management
+ Specification may contain an additional
<prgn>config</prgn> script and a <tt>templates</tt>
file in their control archive<footnote>
The control.tar.gz inside the .deb.
Therefore it must work using only the tools present in
<em>essential</em> packages.<footnote>
<package>Debconf</package> or another tool that
- implements the Debian Configuration management
- specification will also be installed, and any
+ implements the Debian Configuration Management
+ Specification will also be installed, and any
versioned dependencies on it will be satisfied
before preconfiguration begins.
</footnote>
</p>
<p>
- Packages which use the Debian Configuration management
- specification must allow for translation of their messages
- by using a gettext-based system such as the one provided by
- the <package>po-debconf</package> package.
+ Packages which use the Debian Configuration Management
+ Specification must allow for translation of their user-visible
+ messages by using a gettext-based system such as the one
+
provided by the <package>po-debconf</package> package.
</p>
<p>
</p>
<p>
- The <var>date</var> should be in RFC822 format<footnote>
+ The <var>date</var> has the following format<footnote>
This is generated by <tt>date -R</tt>.
- </footnote>; it should include the time zone specified
- numerically, with the time zone name or abbreviation
- optionally present as a comment in parentheses.
+ </footnote> (compatible and with the same semantics of
+ RFC 2822 and RFC 5322):
+ <example>day-of-week, dd month yyyy hh:mm:ss +zzzz</example>
+ where:
+ <list compact="compact">
+ <item>day-of week is one of: Mon, Tue, Wed, Thu, Fri, Sat, Sun</item>
+ <item>dd is a one- or two-digit day of the month (01-31)</item>
+ <item>month is one of: Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec</item>
+ <item>yyyy is the four-digit year (e.g. 2010)</item>
+ <item>hh is the two-digit hour (00-23</item>
+ <item>mm is the two-digit minutes (00-59)</item>
+ <item>ss is the two-digit seconds (00-60)</item>
+ <item>
+ +zzzz or -zzzz is the the time zone offset from Coordinated Universal
+ Time (UTC). "+" indicates that the time is ahead of (i.e., east of) UTC
+ and "-" indicates that the time is behind (i.e., west of) UTC. The
+ first two digits indicate the hour difference from UTC and the last
+ two digits indicate the number of additional minutes difference from
+ UTC. The last two digits must be in the range 00-59.
+ </item>
+ </list>
</p>
<p>
- The first "title" line with the package name should start
- at the left hand margin; the "trailer" line with the
- maintainer and date details should be preceded by exactly
+ The first "title" line with the package name must start
+ at the left hand margin. The "trailer" line with the
+ maintainer and date details must be preceded by exactly
one space. The maintainer details and the date must be
separated by exactly two spaces.
</p>
For more information on placement of the changelog files
within binary packages, please see <ref id="changelogs">.
</p>
-
- <sect1><heading>Alternative changelog formats</heading>
-
- <p>
- In non-experimental packages you must use a format for
- <file>debian/changelog</file> which is supported by the most
- recent released version of <prgn>dpkg</prgn>.
- </p>
-
- <p>
- It is possible to use a format different from the standard
- one by providing a changelog parser for the format you wish
- to use. The parser must have an API compatible with that
- expected by <prgn>dpkg-genchanges</prgn> and
- <prgn>dpkg-gencontrol</prgn>, and it must not interact with
- the user at all.
- <footnote>
- If there is general interest in the new format, you should
- contact the <package>dpkg</package> maintainer to have the
- parser script for it included in the <prgn>dpkg</prgn>
- package. (You will need to agree that the parser and its
- man page may be distributed under the GNU GPL, just as the rest
- of <prgn>dpkg</prgn> is.)
- </footnote>
- </p>
- </sect1>
</sect>
+
<sect id="dpkgcopyright">
<heading>Copyright: <file>debian/copyright</file></heading>
<p>
- Every package must be accompanied by a verbatim copy of
- its copyright and distribution license in the file
+ Every package must be accompanied by a verbatim copy of its
+ copyright information and distribution license in the file
<file>/usr/share/doc/<var>package</var>/copyright</file>
(see <ref id="copyrightfile"> for further details). Also see
- <ref id="pkgcopyright"> for further considerations relayed
+ <ref id="pkgcopyright"> for further considerations related
to copyrights for packages.
</p>
</sect>
<p>
It must start with the line <tt>#!/usr/bin/make -f</tt>,
so that it can be invoked by saying its name rather than
- invoking <prgn>make</prgn> explicitly.
+ invoking <prgn>make</prgn> explicitly. That is, invoking
+ either of <tt>make -f debian/rules <em>args...</em></tt>
+ or <tt>./debian/rules <em>args...</em></tt> must result in
+ identical behavior.
</p>
<p>
Since an interactive <file>debian/rules</file> script makes it
impossible to auto-compile that package and also makes it
hard for other people to reproduce the same binary
- package, all <em>required targets</em> MUST be
+ package, all <em>required targets</em> must be
non-interactive. At a minimum, required targets are the
ones called by <prgn>dpkg-buildpackage</prgn>, namely,
<em>clean</em>, <em>binary</em>, <em>binary-arch</em>,
<item>
<tt>DEB_*_ARCH</tt> (the Debian architecture)
</item>
+ <item>
+ <tt>DEB_*_ARCH_CPU</tt> (the Debian CPU name)
+ </item>
+ <item>
+ <tt>DEB_*_ARCH_OS</tt> (the Debian System name)
+ </item>
<item>
<tt>DEB_*_GNU_TYPE</tt> (the GNU style architecture
specification string)
It is important to understand that the <tt>DEB_*_ARCH</tt>
string only determines which Debian architecture we are
building on or for. It should not be used to get the CPU
- or system information; the GNU style variables should be
- used for that.
+ or system information; the <tt>DEB_*_ARCH_CPU</tt> and
+ <tt>DEB_*_ARCH_OS</tt> variables should be used for that.
+ GNU style variables should generally only be used with upstream
+ build systems.
</p>
<sect1 id="debianrules-options">
<p>
The meaning of the following tags has been standardized:
<taglist>
+ <tag>nocheck</tag>
+ <item>
+ This tag says to not run any build-time test suite
+ provided by the package.
+ </item>
<tag>noopt</tag>
<item>
The presence of this tag means that the package should
NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
MAKEFLAGS += -j$(NUMJOBS)
endif
+
+build:
+ # ...
+ifeq (,$(filter nocheck,$(DEB_BUILD_OPTIONS)))
+ # Code to run the package test suite.
+endif
</example>
</p>
</sect1>
<p>
Field names are not case-sensitive, but it is usual to
capitalize the field names using mixed case as shown below.
+ Field values are case-sensitive unless the description of the
+ field says otherwise.
</p>
<p>
would mean a new paragraph.
</p>
+ <p>
+ All control files must be encoded in UTF-8.
+ </p>
</sect>
<sect id="sourcecontrolfiles">
See <ref id="substvars"> for details.
</p>
+ <p>
+ In addition to the control file syntax described <qref
+ id="controlsyntax">above</qref>, this file may also contain
+ comment lines starting with <tt>#</tt> without any preceding
+ whitespace. All such lines are ignored, even in the middle of
+ continuation lines for a multiline field, and do not end a
+ multiline field.
+ </p>
+
</sect>
<sect id="binarycontrolfiles">
package control file when the source package has the same
name and version as the binary package.
</p>
+
+ <p>
+ Package names (both source and binary,
+ see <ref id="f-Package">) must consist only of lower case
+ letters (<tt>a-z</tt>), digits (<tt>0-9</tt>), plus
+ (<tt>+</tt>) and minus (<tt>-</tt>) signs, and periods
+ (<tt>.</tt>). They must be at least two characters long and
+ must start with an alphanumeric character.
+ </p>
</sect1>
<sect1 id="f-Maintainer">
<heading><tt>Priority</tt></heading>
<p>
- This field represents how important that it is that the user
+ This field represents how important it is that the user
have the package installed. See <ref id="priorities">.
</p>
</p>
<p>
- Package names must consist only of lower case letters
- (<tt>a-z</tt>), digits (<tt>0-9</tt>), plus (<tt>+</tt>)
- and minus (<tt>-</tt>) signs, and periods (<tt>.</tt>).
- They must be at least two characters long and must start
- with an alphanumeric character.
+ Binary package names must follow the same syntax and
+ restrictions as source package names. See <ref id="f-Source">
+ for the details.
</p>
</sect1>
<tt>Architecture</tt> field can include the following sets of
values:
<list>
- <item>A unique single word identifying a Debian machine
- architecture, see <ref id="arch-spec">.
- <item><tt>all</tt>, which indicates an
- architecture-independent package.
- <item><tt>any</tt>, which indicates a package available
- for building on any architecture.
- <item><tt>source</tt>, which indicates a source package.
+ <item>
+ A unique single word identifying a Debian machine
+ architecture as described in <ref id="arch-spec">.
+ </item>
+ <item>
+ An architecture wildcard identifying a set of Debian
+ machine architectures, see <ref id="arch-wildcard-spec">.
+ <tt>any</tt> matches all Debian machine architectures
+ and is the most frequently used.
+ </item>
+ <item>
+ <tt>all</tt>, which indicates an
+ architecture-independent package.
+ </item>
+ <item>
+ <tt>source</tt>, which indicates a source package.
+ </item>
</list>
</p>
<p>
In the main <file>debian/control</file> file in the source
- package, or in the source package control file
- <file>.dsc</file>, one may specify a list of architectures
- separated by spaces, or the special values <tt>any</tt> or
- <tt>all</tt>.
+ package, this field may contain the special
+ value <tt>all</tt>, the special architecture
+ wildcard <tt>any</tt>, or a list of specific and wildcard
+ architectures separated by spaces. If <tt>all</tt>
+ or <tt>any</tt> appears, that value must be the entire
+ contents of the field. Most packages will use
+ either <tt>all</tt> or <tt>any</tt>.
+ </p>
+
+ <p>
+ Specifying a specific list of architectures indicates that the
+ source will build an architecture-dependent package only on
+ architectures included in the list. Specifying a list of
+ architecture wildcards indicates that the source will build an
+ architecture-dependent package on only those architectures
+ that match any of the specified architecture wildcards.
+ Specifying a list of architectures or architecture wildcards
+ other than <tt>any</tt> is for the minority of cases where a
+ program is not portable or is not useful on some
+ architectures. Where possible, the program should be made
+ portable instead.
+ </p>
+
+ <p>
+ In the source package control file <file>.dsc</file>, this
+ field may contain either the architecture
+ wildcard <tt>any</tt> or a list of architectures and
+ architecture wildcards separated by spaces. If a list is
+ given, it may include (or consist solely of) the special
+ value <tt>all</tt>. In other words, in <file>.dsc</file>
+ files unlike the <file>debian/control</file>, <tt>all</tt> may
+ occur in combination with specific architectures.
+ The <tt>Architecture</tt> field in the source package control
+ file <file>.dsc</file> is generally constructed from
+ the <tt>Architecture</tt> fields in
+ the <file>debian/control</file> in the source package.
</p>
<p>
Specifying <tt>any</tt> indicates that the source package
isn't dependent on any particular architecture and should
compile fine on any one. The produced binary package(s)
- will be specific to whatever the current build architecture
- is.<footnote>
- This is the most often used setting, and is recommended
- for new packages that aren't <tt>Architecture: all</tt>.
- </footnote>
+ will either be specific to whatever the current build
+ architecture is or will be architecture-independent.
</p>
<p>
- Specifying a list of architectures indicates that the source
- will build an architecture-dependent package, and will only
- work correctly on the listed architectures.<footnote>
- This is a setting used for a minority of cases where the
- program is not portable. Generally, it should not be used
- for new packages.
- </footnote>
+ Specifying only <tt>all</tt> indicates that the source package
+ will only build architecture-independent packages. If this is
+ the case, <tt>all</tt> must be used rather than <tt>any</tt>;
+ <tt>any</tt> implies that the source package will build at
+ least one architecture-dependent package.
+ </p>
+
+ <p>
+ Specifying a list of architectures or architecture wildcards
+ indicates that the source will build an architecture-dependent
+ package, and will only work correctly on the listed or
+ matching architectures. If the source package also builds at
+ least one architecture-independent package, <tt>all</tt> will
+ also be included in the list.
</p>
<p>
In a <file>.changes</file> file, the <tt>Architecture</tt>
- field lists the architecture(s) of the package(s)
- currently being uploaded. This will be a list; if the
- source for the package is also being uploaded, the special
- entry <tt>source</tt> is also present.
+ field lists the architecture(s) of the package(s) currently
+ being uploaded. This will be a list; if the source for the
+ package is also being uploaded, the special
+ entry <tt>source</tt> is also present. <tt>all</tt> will be
+ present if any architecture-independent packages are being
+ uploaded. Architecture wildcards such as <tt>any</tt> must
+ never occur in the <tt>Architecture</tt> field in
+ the <file>.changes</file> file.
</p>
<p>
- See <ref id="debianrules"> for information how to get the
- architecture for the build process.
+ See <ref id="debianrules"> for information on how to get
+ the architecture for the build process.
</p>
</sect1>
<p>
Thus only the first three components of the policy version
are significant in the <em>Standards-Version</em> control
- field, and so either these three components or the all
- four components may be specified.<footnote>
+ field, and so either these three components or all four
+ components may be specified.<footnote>
In the past, people specified the full version number
in the Standards-Version field, for example "2.3.0.0".
Since minor patch-level changes don't introduce new
<em>not</em> intended to cope with version numbers containing
strings of letters which the package management system cannot
interpret (such as <tt>ALPHA</tt> or <tt>pre-</tt>), or with
- silly orderings (the author of this manual has heard of a
- package whose versions went <tt>1.1</tt>, <tt>1.2</tt>,
- <tt>1.3</tt>, <tt>1</tt>, <tt>2.1</tt>, <tt>2.2</tt>,
- <tt>2</tt> and so forth).
+ silly orderings.<footnote>
+ The author of this manual has heard of a package whose
+ versions went <tt>1.1</tt>, <tt>1.2</tt>, <tt>1.3</tt>,
+ <tt>1</tt>, <tt>2.1</tt>, <tt>2.2</tt>, <tt>2</tt> and so
+ forth.
+ </footnote>
</p>
</sect1>
</p>
<p>
- In a <file>.changes</file> file, the <tt>Description</tt> field
- contains a summary of the descriptions for the packages being
- uploaded.
+ In a <file>.changes</file> file, the <tt>Description</tt>
+ field contains a summary of the descriptions for the packages
+ being uploaded. For this case, the first line of the field
+ value (the part on the same line as <tt>Description:</tt>) is
+ always empty. The content of the field is expressed as
+ continuation lines, one line per package. Each line is
+ indented by one space and contains the name of a binary
+ package, a space, a hyphen (<tt>-</tt>), a space, and the
+ short description line from that package.
</p>
-
- <p>
- The part of the field before the first newline is empty;
- thereafter each line has the name of a binary package and
- the summary description line from that binary package.
- Each line is indented by one space.
- </p>
-
</sect1>
<sect1 id="f-Distribution">
distribution(s) where this version of the package should
be installed. Valid distributions are determined by the
archive maintainers.<footnote>
- Current distribution names are:
+ Example distribution names in the Debian archive used in
+ <file>.changes</file> files are:
<taglist compact="compact">
- <tag><em>stable</em></tag>
- <item>
- This is the current "released" version of Debian
- GNU/Linux. Once the distribution is
- <em>stable</em> only security fixes and other
- major bug fixes are allowed. When changes are
- made to this distribution, the release number is
- increased (for example: 2.2r1 becomes 2.2r2 then
- 2.2r3, etc).
- </item>
-
<tag><em>unstable</em></tag>
<item>
- This distribution value refers to the
- <em>developmental</em> part of the Debian
- distribution tree. New packages, new upstream
- versions of packages and bug fixes go into the
- <em>unstable</em> directory tree. Download from
- this distribution at your own risk.
- </item>
-
- <tag><em>testing</em></tag>
- <item>
- This distribution value refers to the
- <em>testing</em> part of the Debian distribution
- tree. It receives its packages from the
- unstable distribution after a short time lag to
- ensure that there are no major issues with the
- unstable packages. It is less prone to breakage
- than unstable, but still risky. It is not
- possible to upload packages directly to
- <em>testing</em>.
- </item>
-
- <tag><em>frozen</em></tag>
- <item>
- From time to time, the <em>testing</em>
- distribution enters a state of "code-freeze" in
- anticipation of release as a <em>stable</em>
- version. During this period of testing only
- fixes for existing or newly-discovered bugs will
- be allowed. The exact details of this stage are
- determined by the Release Manager.
+ This distribution value refers to the
+ <em>developmental</em> part of the Debian distribution
+ tree. Most new packages, new upstream versions of
+ packages and bug fixes go into the <em>unstable</em>
+ directory tree.
</item>
<tag><em>experimental</em></tag>
<item>
- The packages with this distribution value are
- deemed by their maintainers to be high
- risk. Oftentimes they represent early beta or
- developmental packages from various sources that
- the maintainers want people to try, but are not
- ready to be a part of the other parts of the
- Debian distribution tree. Download at your own
- risk.
+ The packages with this distribution value are deemed
+ by their maintainers to be high risk. Oftentimes they
+ represent early beta or developmental packages from
+ various sources that the maintainers want people to
+ try, but are not ready to be a part of the other parts
+ of the Debian distribution tree.
</item>
</taglist>
<p>
- You should list <em>all</em> distributions that the
- package should be installed into.
- </p>
-
- <p>
- More information is available in the Debian Developer's
- Reference, section "The Debian archive".
+ Others are used for updating stable releases or for
+ security uploads. More information is available in the
+ Debian Developer's Reference, section "The Debian
+ archive".
</p>
</footnote>
+ The Debian archive software only supports listing a single
+ distribution. Migration of packages to other distributions is
+ handled outside of the upload process.
</p>
</sect1>
</p>
<p>
- There should be nothing in this field before the first
- newline; all the subsequent lines must be indented by at
- least one space; blank lines must be represented by a line
- consisting only of a space and a full stop.
+ The first line of the field value (the part on the same line
+ as <tt>Changes:</tt>) is always empty. The content of the
+ field is expressed as continuation lines, with each line
+ indented by at least one space. Blank lines must be
+ represented by a line consisting only of a space and a full
+ stop (<tt>.</tt>).
</p>
<p>
for the most recent version should be returned first, and
entries should be separated by the representation of a
blank line (the "title" line may also be followed by the
- representation of blank line).
+ representation of a blank line).
</p>
</sect1>
<heading><tt>Binary</tt></heading>
<p>
- This field is a list of binary packages.
+ This field is a list of binary packages. Its syntax and
+ meaning varies depending on the control file in which it
+ appears.
</p>
<p>
- When it appears in the <file>.dsc</file> file it is the list
- of binary packages which a source package can produce. It
- does not necessarily produce all of these binary packages
- for every architecture. The source control file doesn't
- contain details of which architectures are appropriate for
- which of the binary packages.
- </p>
-
- <p>
- When it appears in a <file>.changes</file> file it lists the
- names of the binary packages actually being uploaded.
+ When it appears in the <file>.dsc</file> file, it lists binary
+ packages which a source package can produce, separated by
+ commas<footnote>
+ A space after each comma is conventional.
+ </footnote>. It may span multiple lines. The source package
+ does not necessarily produce all of these binary packages for
+ every architecture. The source control file doesn't contain
+ details of which architectures are appropriate for which of
+ the binary packages.
</p>
<p>
- The syntax is a list of binary packages separated by
- commas<footnote>
- A space after each comma is conventional.
- </footnote>. Currently the packages must be separated using
- only spaces in the <file>.changes</file> file.
+ When it appears in a <file>.changes</file> file, it lists the
+ names of the binary packages being uploaded, separated by
+ whitespace (not commas). It may span multiple lines.
</p>
</sect1>
<heading><tt>Installed-Size</tt></heading>
<p>
- This field appears in the control files of binary
- packages, and in the <file>Packages</file> files. It gives
- the total amount of disk space required to install the
- named package.
+ This field appears in the control files of binary packages,
+ and in the <file>Packages</file> files. It gives an estimate
+ of the total amount of disk space required to install the
+ named package. Actual installed size may vary based on block
+ size, file system properties, or actions taken by package
+ maintainer scripts.
</p>
<p>
- The disk space is represented in kilobytes as a simple
- decimal number.
+ The disk space is given as the integer value of the estimated
+ installed size in bytes, divided by 1024 and rounded up.
</p>
</sect1>
<p>
This field contains a list of files with information about
each one. The exact information and syntax varies with
- the context. In all cases the part of the field
- contents on the same line as the field name is empty. The
- remainder of the field is one line per file, each line
- being indented by one space and containing a number of
- sub-fields separated by spaces.
+ the context.
+ </p>
+
+ <p>
+ In all cases, Files is a multiline field. The first line of
+ the field value (the part on the same line as <tt>Files:</tt>)
+ is always empty. The content of the field is expressed as
+ continuation lines, one line per file. Each line must be
+ indented by one space and contain a number of sub-fields,
+ separated by spaces, as described below.
</p>
<p>
In the <file>.dsc</file> file, each line contains the MD5
- checksum, size and filename of the tar file and (if applicable)
- diff file which make up the remainder of the source
- package<footnote>
- That is, the parts which are not the <tt>.dsc</tt>.
- </footnote>.
+ checksum, size and filename of the tar file and (if
+ applicable) diff file which make up the remainder of the
+ source package<footnote>
+ That is, the parts which are not the <tt>.dsc</tt>.
+ </footnote>. For example:
+ <example>
+Files:
+ c6f698f19f2a2aa07dbb9bbda90a2754 571925 example_1.2.orig.tar.gz
+ 938512f08422f3509ff36f125f5873ba 6220 example_1.2-1.diff.gz
+ </example>
The exact forms of the filenames are described
in <ref id="pkg-sourcearchives">.
</p>
<p>
In the <file>.changes</file> file this contains one line per
file being uploaded. Each line contains the MD5 checksum,
- size, section and priority and the filename.
+ size, section and priority and the filename. For example:
+ <example>
+Files:
+ 4c31ab7bfc40d3cf49d7811987390357 1428 text extra example_1.2-1.dsc
+ c6f698f19f2a2aa07dbb9bbda90a2754 571925 text extra example_1.2.orig.tar.gz
+ 938512f08422f3509ff36f125f5873ba 6220 text extra example_1.2-1.diff.gz
+ 7c98fe853b3bbb47a00e5cd129b6cb56 703542 text extra example_1.2-1_i386.deb
+ </example>
The <qref id="f-Section">section</qref>
- and <qref id="f-Priority">priority</qref>
- are the values of the corresponding fields in
- the main source control file. If no section or priority is
- specified then <tt>-</tt> should be used, though section
- and priority values must be specified for new packages to
- be installed properly.
+ and <qref id="f-Priority">priority</qref> are the values of
+ the corresponding fields in the main source control file. If
+ no section or priority is specified then <tt>-</tt> should be
+ used, though section and priority values must be specified for
+ new packages to be installed properly.
</p>
<p>
no new original source archive is being distributed the
<tt>.dsc</tt> must still contain the <tt>Files</tt> field
entry for the original source archive
- <file><var>package</var>-<var>upstream-version</var>.orig.tar.gz</file>,
+ <file><var>package</var>_<var>upstream-version</var>.orig.tar.gz</file>,
but the <file>.changes</file> file should leave it out. In
this case the original source archive on the distribution
site must match exactly, byte-for-byte, the original
scripts this means that you <em>almost always</em> need to
use <tt>set -e</tt> (this is usually true when writing shell
scripts, in fact). It is also important, of course, that
- they don't exit with a non-zero status if everything went
- well.
+ they exit with a zero status if everything went well.
</p>
<p>
<heading>Controlling terminal for maintainer scripts</heading>
<p>
- The maintainer scripts are guaranteed to run with a
- controlling terminal and can interact with the user.
- Because these scripts may be executed with standard output
- redirected into a pipe for logging purposes, Perl scripts
- should set unbuffered output by setting <tt>$|=1</tt> so
- that the output is printed immediately rather than being
- buffered.
+ Maintainer scripts are not guaranteed to run with a controlling
+ terminal and may not be able to interact with the user. They
+ must be able to fall back to noninteractive behavior if no
+ controlling terminal is available. Maintainer scripts that
+ prompt via a program conforming to the Debian Configuration
+ Management Specification (see <ref id="maintscriptprompt">) may
+ assume that program will handle falling back to noninteractive
+ behavior.
+ </p>
+
+ <p>
+ For high-priority prompts without a reasonable default answer,
+ maintainer scripts may abort if there is no controlling
+ terminal. However, this situation should be avoided if at all
+ possible, since it prevents automated or unattended installs.
+ In most cases, users will consider this to be a bug in the
+ package.
</p>
</sect>
+
<sect id="exitstatus">
<heading>Exit status</heading>
</example>
If this works, then the old-version is
"Installed", if not, the old version is in a
- "Failed-Config" state.
+ "Half-Configured" state.
</item>
</enumlist>
</item>
If this fails, the package is left in a
"Half-Installed" state, which requires a
reinstall. If it works, the packages is left in
- a "Config Files" state.
+ a "Config-Files" state.
</item>
<item>
Otherwise (i.e., the package was completely purged):
<var>new-postrm</var> abort-install
</example>
If the error-unwind fails, the package is in a
- "Half Installed" phase, and requires a
+ "Half-Installed" phase, and requires a
reinstall. If the error unwind works, the
package is in a not installed state.
</item>
<example compact="compact">
<var>old-preinst</var> abort-upgrade <var>new-version</var>
</example>
- If this fails, the old version is left in an
- "Half Installed" state. If it works, dpkg now
+ If this fails, the old version is left in a
+ "Half-Installed" state. If it works, dpkg now
calls:
<example compact="compact">
<var>new-postrm</var> abort-upgrade <var>old-version</var>
</example>
- If this fails, the old version is left in an
- "Half Installed" state. If it works, dpkg now
+ If this fails, the old version is left in a
+ "Half-Installed" state. If it works, dpkg now
calls:
<example compact="compact">
<var>old-postinst</var> abort-upgrade <var>new-version</var>
</example>
</p>
<p>
- If this fails, the package is in a "Failed-Config"
+ If this fails, the package is in a "Half-Configured"
state, or else it remains "Installed".
</p>
</item>
Build-Depends: kernel-headers-2.2.10 [!hurd-i386],
hurd-dev [hurd-i386], gnumach-dev [hurd-i386]
</example>
+ requires <tt>kernel-headers-2.2.10</tt> on all architectures
+ other than hurd-i386 and requires <tt>hurd-dev</tt> and
+ <tt>gnumach-dev</tt> only on hurd-i386.
+ </p>
+
+ <p>
+ If the architecture-restricted dependency is part of a set of
+ alternatives using <tt>|</tt>, that alternative is ignored
+ completely on architectures that do not match the restriction.
+ For example:
+ <example compact="compact">
+Build-Depends: foo [!i386] | bar [!amd64]
+ </example>
+ is equivalent to <tt>bar</tt> on the i386 architecture, to
+ <tt>foo</tt> on the amd64 architecture, and to <tt>foo |
+ bar</tt> on all other architectures.
</p>
+ <p>
+ All fields that specify build-time relationships may also be
+ restricted to a certain set of architectures using architecture
+ wildcards. The syntax for declaring such restrictions is the
+ same as declaring restrictions using a certain set of
+ architectures without architecture wildcards. For example:
+ <example compact="compact">
+Build-Depends: foo [linux-any], bar [any-i386], baz [!linux-any]
+ </example>
+ is equivalent to <tt>foo</tt> on architectures using the Linux
+ kernel and any cpu, <tt>bar</tt> on architectures using any
+ kernel and an i386 cpu, and <tt>baz</tt> on any architecture
+ using a kernel other than Linux.
+ </p>
+
<p>
Note that the binary package relationship fields such as
<tt>Depends</tt> appear in one of the binary package
This is done using the <tt>Depends</tt>, <tt>Pre-Depends</tt>,
<tt>Recommends</tt>, <tt>Suggests</tt>, <tt>Enhances</tt>,
<tt>Breaks</tt> and <tt>Conflicts</tt> control file fields.
+ <tt>Breaks</tt> is described in <ref id="breaks">, and
+ <tt>Conflicts</tt> is described in <ref id="conflicts">. The
+ rest are described below.
</p>
<p>
be <em>unpacked</em> the pre-dependency can be
satisfied if the depended-on package is either fully
configured, <em>or even if</em> the depended-on
- package(s) are only unpacked or half-configured,
- provided that they have been configured correctly at
- some point in the past (and not removed or partially
- removed since). In this case, both the
+ package(s) are only unpacked or in the "Half-Configured"
+ state, provided that they have been configured
+ correctly at some point in the past (and not removed
+ or partially removed since). In this case, both the
previously-configured and currently unpacked or
- half-configured versions must satisfy any version
+ "Half-Configured" versions must satisfy any version
clause in the <tt>Pre-Depends</tt> field.
</p>
<sect id="breaks">
<heading>Packages which break other packages - <tt>Breaks</tt></heading>
- <p>
- Using <tt>Breaks</tt> may cause problems for upgrades from older
- versions of Debian and should not be used until the stable
- release of Debian supports <tt>Breaks</tt>.
- </p>
-
<p>
When one binary package declares that it breaks another,
<prgn>dpkg</prgn> will refuse to allow the package which
<p>
A package will not be regarded as causing breakage merely
because its configuration files are still installed; it must
- be at least half-installed.
+ be at least "Half-Installed".
</p>
<p>
<p>
A package will not cause a conflict merely because its
configuration files are still installed; it must be at least
- half-installed.
+ "Half-Installed".
</p>
<p>
<prgn>dpkg</prgn> from upgrading or installing the package
which declared such a conflict until the upgrade or removal
of the conflicted-with package had been completed. Instead,
- <tt>Breaks</tt> may be used (once <tt>Breaks</tt> is supported
- by the stable release of Debian).
+ <tt>Breaks</tt> may be used.
</p>
</sect>
</p>
<p>
- If you are creating a udeb for use in the Debian Installer, you
- will need to specify that <prgn>dpkg-shlibdeps</prgn> should use
- the dependency line of type <tt>udeb</tt> by adding
- <tt>-tudeb</tt> as option<footnote>
+ If you are creating a udeb for use in the Debian Installer,
+ you will need to specify that <prgn>dpkg-shlibdeps</prgn>
+ should use the dependency line of type <tt>udeb</tt> by
+ adding the <tt>-tudeb</tt> option<footnote>
<prgn>dh_shlibdeps</prgn> from the <tt>debhelper</tt> suite
will automatically add this option if it knows it is
processing a udeb.
<sect1 id="fhs">
- <heading>File system Structure</heading>
+ <heading>File System Structure</heading>
<p>
The location of all installed files and directories must
- comply with the File system Hierarchy Standard (FHS),
+ comply with the Filesystem Hierarchy Standard (FHS),
version 2.3, with the exceptions noted below, and except
where doing so would violate other terms of Debian
Policy. The following exceptions to the FHS apply:
<enumlist>
- <item>
- <p>
- Legacy XFree86 servers are permitted to retain the
- configuration file location
- <file>/etc/X11/XF86Config-4</file>.
- </p>
- </item>
<item>
<p>
The optional rules related to user specific
for 64 bit binaries is removed.
</p>
</item>
+ <item>
+ <p>
+ The requirement for object files, internal binaries, and
+ libraries, including <file>libc.so.*</file>, to be located
+ directly under <file>/lib{,32}</file> and
+ <file>/usr/lib{,32}</file> is amended, permitting files
+ to instead be installed to
+ <file>/lib/<var>triplet</var></file> and
+ <file>/usr/lib/<var>triplet</var></file>, where
+ <tt><var>triplet</var></tt> is the value returned by
+ <tt>dpkg-architecture -qDEB_HOST_GNU_TYPE</tt> for the
+ architecture of the package. Packages may <em>not</em>
+ install files to any <var>triplet</var> path other
+ than the one matching the architecture of that package;
+ for instance, an <tt>Architecture: amd64</tt> package
+ containing 32-bit x86 libraries may not install these
+ libraries to <file>/usr/lib/i486-linux-gnu</file>.
+ <footnote>
+ This is necessary in order to reserve the directories for
+ use in cross-installation of library packages from other
+ architectures, as part of the planned deployment of
+ <tt>multiarch</tt>.
+ </footnote>
+ </p>
+ <p>
+ Applications may also use a single subdirectory under
+ <file>/usr/lib/<var>triplet</var></file>.
+ </p>
+ <p>
+ The execution time linker/loader, ld*, must still be made
+ available in the existing location under /lib or /lib64
+ since this is part of the ELF ABI for the architecture.
+ </p>
+ </item>
<item>
<p>
The requirement that
symlinked there, is relaxed to a recommendation.
</p>
</item>
+ <item>
+ <p>
+ The following directories in the root filesystem are
+ additionally allowed: <file>/sys</file> and
+ <file>/selinux</file>. <footnote>These directories
+ are used as mount points to mount virtual filesystems
+ to get access to kernel information.</footnote>
+ </p>
+ </item>
</enumlist>
</p>
</p>
<p>
- Note, that this applies only to directories <em>below</em>
- <file>/usr/local</file>, not <em>in</em> <file>/usr/local</file>.
- Packages must not create sub-directories in the directory
- <file>/usr/local</file> itself, except those listed in FHS,
- section 4.5. However, you may create directories below
- them as you wish. You must not remove any of the
- directories listed in 4.5, even if you created them.
+ Note that this applies only to
+ directories <em>below</em> <file>/usr/local</file>,
+ not <em>in</em> <file>/usr/local</file>. Packages must
+ not create sub-directories in the
+ directory <file>/usr/local</file> itself, except those
+ listed in FHS, section 4.5. However, you may create
+ directories below them as you wish. You must not remove
+ any of the directories listed in 4.5, even if you created
+ them.
</p>
<p>
<sect1>
<heading>The system-wide mail directory</heading>
<p>
- The system-wide mail directory is <file>/var/mail</file>. This
- directory is part of the base system and should not owned
- by any particular mail agents. The use of the old
+ The system-wide mail directory
+ is <file>/var/mail</file>. This directory is part of the
+ base system and should not be owned by any particular mail
+ agents. The use of the old
location <file>/var/spool/mail</file> is deprecated, even
though the spool may still be physically located there.
- To maintain partial upgrade compatibility for systems
- which have <file>/var/spool/mail</file> as their physical mail
- spool, packages using <file>/var/mail</file> must depend on
- either <package>libc6</package> (>= 2.1.3-13), or on
- <package>base-files</package> (>= 2.2.0), or on later
- versions of either one of these packages.
</p>
</sect1>
</sect>
</p>
</item>
- <tag>1000-29999:</tag>
+ <tag>1000-59999:</tag>
<item>
<p>
Dynamically allocated user accounts. By default
</p>
</item>
- <tag>30000-59999:</tag>
- <item>
- <p>Reserved.</p>
- </item>
-
<tag>60000-64999:</tag>
<item>
<p>
<tt>K</tt> prefix, but they too are called with the single
argument <tt>stop</tt>.
</p>
-
- <p>
- Also, if the script name ends in <tt>.sh</tt>, the script
- will be sourced in runlevel <tt>S</tt> rather than being
- run in a forked subprocess, but will be explicitly run by
- <prgn>sh</prgn> in all other runlevels.
- </p>
</sect1>
- <sect1>
+ <sect1 id="writing-init">
<heading>Writing the scripts</heading>
<p>
option.
</p>
+ <p>
+ Be careful of using <tt>set -e</tt> in <file>init.d</file>
+ scripts. Writing correct <file>init.d</file> scripts requires
+ accepting various error exit statuses when daemons are already
+ running or already stopped without aborting
+ the <file>init.d</file> script, and common <file>init.d</file>
+ function libraries are not safe to call with <tt>set -e</tt>
+ in effect<footnote>
+ <tt>/lib/lsb/init-functions</tt>, which assists in writing
+ LSB-compliant init scripts, may fail if <tt>set -e</tt> is
+ in effect and echoing status messages to the console fails,
+ for example.
+ </footnote>. For <tt>init.d</tt> scripts, it's often easier
+ to not use <tt>set -e</tt> and instead check the result of
+ each command separately.
+ </p>
+
<p>
If a service reloads its configuration automatically (as
in the case of <prgn>cron</prgn>, for example), the
script must behave sensibly and not fail if the
<file>/etc/default</file> file is deleted.
</p>
+
+ <p>
+ <file>/var/run</file> and <file>/var/lock</file> may be mounted
+ as temporary filesystems<footnote>
+ For example, using the <tt>RAMRUN</tt> and <tt>RAMLOCK</tt>
+ options in <file>/etc/default/rcS</file>.
+ </footnote>, so the <file>init.d</file> scripts must handle this
+ correctly. This will typically amount to creating any required
+ subdirectories dynamically when the <file>init.d</file> script
+ is run, rather than including them in the package and relying on
+ <prgn>dpkg</prgn> to create them.
+ </p>
</sect1>
<sect1>
</p>
<p>
- Note that the same symbol (<tt>"</tt>) is used for the left
- and right quotation marks. A grave accent (<tt>`</tt>) is
- not a quote character; neither is an apostrophe
- (<tt>'</tt>).
+ Note that the same symbol (<tt>"</tt>) <!-- " --> is used
+ for the left and right quotation marks. A grave accent
+ (<tt>`</tt>) is not a quote character; neither is an
+ apostrophe (<tt>'</tt>).
</p>
</item>
<prgn>anacron</prgn>. Thus, you should only use this
directory for jobs which may be skipped if the system is not
running.)</p>
+ <p>
+ Unlike <file>crontab</file> files described in the IEEE Std
+ 1003.1-2008 (POSIX.1) available from
+ <url id="http://www.opengroup.org/onlinepubs/9699919799/"
+ name="The Open Group">, the files in
+ <file>/etc/cron.d</file> and the file
+ <file>/etc/crontab</file> have seven fields; namely:
+ <enumlist>
+ <item>Minute [0,59]</item>
+ <item>Hour [0,23]</item>
+ <item>Day of the month [1,31]</item>
+ <item>Month of the year [1,12]</item>
+ <item>Day of the week ([0,6] with 0=Sunday)</item>
+ <item>Username</item>
+ <item>Command to be run</item>
+ </enumlist>
+ Ranges of numbers are allowed. Ranges are two numbers
+ separated with a hyphen. The specified range is inclusive.
+ Lists are allowed. A list is a set of numbers (or ranges)
+ separated by commas. Step values can be used in conjunction
+ with ranges.
+ </p>
<p>
- The scripts or crontab entries in these directories should
+ The scripts or <tt>crontab</tt> entries in these directories should
check if all necessary programs are installed before they
try to execute them. Otherwise, problems will arise when a
package was removed but not purged since configuration files
- are kept on the system in this situation.</p>
+ are kept on the system in this situation.
+ </p>
+
+ <p>
+ Any <tt>cron</tt> daemon must provide
+ <file>/usr/bin/crontab</file> and support normal
+ <tt>crontab</tt> entries as specified in POSIX. The daemon
+ must also support names for days and months, ranges, and
+ step values. It has to support <file>/etc/crontab</file>,
+ and correctly execute the scripts in
+ <file>/etc/cron.d</file>. The daemon must also correctly
+ execute scripts in
+ <file>/etc/cron.{hourly,daily,weekly,monthly}</file>.
+ </p>
</sect>
<sect id="menus">
</footnote>
</p>
- <p>
- Packages containing shared libraries that may be linked to
- by other packages' binaries, but which for some
- <em>compelling</em> reason can not be installed in
- <file>/usr/lib</file> directory, may install the shared library
- files in subdirectories of the <file>/usr/lib</file> directory,
- in which case they should arrange to add that directory in
- <file>/etc/ld.so.conf</file> in the package's post-installation
- script, and remove it in the package's post-removal script.
- </p>
-
<p>
An ever increasing number of packages are using
<prgn>libtool</prgn> to do their linking. The latest GNU
language currently used to implement it.
</p>
<p>
- Shell scripts (<prgn>sh</prgn> and <prgn>bash</prgn>)
- should almost certainly start with <tt>set -e</tt> so that
- errors are detected. Every script should use
- <tt>set -e</tt> or check the exit status of <em>every</em>
- command.
+ Shell scripts (<prgn>sh</prgn> and <prgn>bash</prgn>) other than
+ <file>init.d</file> scripts should almost certainly start
+ with <tt>set -e</tt> so that errors are detected.
+ <file>init.d</file> scripts are something of a special case, due
+ to how frequently they need to call commands that are allowed to
+ fail, and it may instead be easier to check the exit status of
+ commands directly. See <ref id="writing-init"> for more
+ information about writing <file>init.d</file> scripts.
+ </p>
+ <p>
+ Every script should use <tt>set -e</tt> or check the exit status
+ of <em>every</em> command.
</p>
-
<p>
Scripts may assume that <file>/bin/sh</file> implements the
SUSv3 Shell Command Language<footnote>
support <tt>-a</tt> and <tt>-o</tt> as binary logical
operators.</item>
<item><tt>local</tt> to create a scoped variable must be
- supported; however, <tt>local</tt> may or may not preserve
- the variable value from an outer scope and may or may not
- support arguments more complex than simple variables. Only
- uses such as:
+ supported, including listing multiple variables in a single
+ local command and assigning a value to a variable at the
+ same time as localizing it. <tt>local</tt> may or
+ may not preserve the variable value from an outer scope if
+ no assignment is present. Uses such as:
<example compact>
fname () {
- local a
- a=''
- # ... use a ...
+ local a b c=delta d
+ # ... use a, b, c, d ...
}
</example>
- must be supported.
+ must be supported and must set the value of <tt>c</tt> to
+ <tt>delta</tt>.
</item>
</list>
If a shell script requires non-SUSv3 features from the shell
<heading>Device files</heading>
<p>
- Packages must not include device files in the package file
- tree.
+ Packages must not include device files or named pipes in the
+ package file tree.
</p>
<p>
<file>/dev/cu*</file> devices should be changed to use
<file>/dev/ttyS*</file>.
</p>
+
+ <p>
+ Named pipes needed by the package must be created in
+ the <prgn>postinst</prgn> script<footnote>
+ It's better to use <prgn>mkfifo</prgn> rather
+ than <prgn>mknod</prgn> to create named pipes so that
+ automated checks for packages incorrectly creating device
+ files with <prgn>mknod</prgn> won't have false positives.
+ </footnote> and removed in
+ the <prgn>prerm</prgn> or <prgn>postrm</prgn> script as
+ appropriate.
+ </p>
</sect>
<sect id="config-files">
security policy by changing the permissions on a binary:
they can do this by using <prgn>dpkg-statoverride</prgn>, as
described below.<footnote>
- Ordinary files installed by <prgn>dpkg</prgn> (as
- opposed to <tt>conffile</tt>s and other similar objects)
- normally have their permissions reset to the distributed
- permissions when the package is reinstalled. However,
- the use of <prgn>dpkg-statoverride</prgn> overrides this
- default behavior. If you use this method, you should
- remember to describe <prgn>dpkg-statoverride</prgn> in
- the package documentation; being a relatively new
- addition to Debian, it is probably not yet well-known.
+ Ordinary files installed by <prgn>dpkg</prgn> (as
+ opposed to <tt>conffile</tt>s and other similar objects)
+ normally have their permissions reset to the distributed
+ permissions when the package is reinstalled. However,
+ the use of <prgn>dpkg-statoverride</prgn> overrides this
+ default behavior.
</footnote>
Another method you should consider is to create a group for
people allowed to use the program(s) and make any setuid
fi
done
</example>
- The corresponding <tt>dpkg-statoverride --remove</tt>
- calls can then be made unconditionally when the package is
- purged.
+ The corresponding code to remove the override when the package
+ is purged would be:
+ <example>
+for i in /usr/bin/foo /usr/sbin/bar
+do
+ if dpkg-statoverride --list $i >/dev/null 2>&1
+ then
+ dpkg-statoverride --remove $i
+ fi
+done
+ </example>
</p>
</sect1>
</sect>
<p>
If a program needs to specify an <em>architecture specification
- string</em> in some place, it should select one of the
- strings provided by <tt>dpkg-architecture -L</tt>. The
- strings are in the format
- <tt><var>os</var>-<var>arch</var></tt>, though the OS part
- is sometimes elided, as when the OS is Linux.<footnote>
- <p>Currently, the strings are:
- i386 ia64 alpha amd64 armeb arm hppa m32r m68k mips
- mipsel powerpc ppc64 s390 s390x sh3 sh3eb sh4 sh4eb
- sparc darwin-i386 darwin-ia64 darwin-alpha darwin-amd64
- darwin-armeb darwin-arm darwin-hppa darwin-m32r
- darwin-m68k darwin-mips darwin-mipsel darwin-powerpc
- darwin-ppc64 darwin-s390 darwin-s390x darwin-sh3
- darwin-sh3eb darwin-sh4 darwin-sh4eb darwin-sparc
- freebsd-i386 freebsd-ia64 freebsd-alpha freebsd-amd64
- freebsd-armeb freebsd-arm freebsd-hppa freebsd-m32r
- freebsd-m68k freebsd-mips freebsd-mipsel freebsd-powerpc
- freebsd-ppc64 freebsd-s390 freebsd-s390x freebsd-sh3
- freebsd-sh3eb freebsd-sh4 freebsd-sh4eb freebsd-sparc
- kfreebsd-i386 kfreebsd-ia64 kfreebsd-alpha
- kfreebsd-amd64 kfreebsd-armeb kfreebsd-arm kfreebsd-hppa
- kfreebsd-m32r kfreebsd-m68k kfreebsd-mips
- kfreebsd-mipsel kfreebsd-powerpc kfreebsd-ppc64
- kfreebsd-s390 kfreebsd-s390x kfreebsd-sh3 kfreebsd-sh3eb
- kfreebsd-sh4 kfreebsd-sh4eb kfreebsd-sparc knetbsd-i386
- knetbsd-ia64 knetbsd-alpha knetbsd-amd64 knetbsd-armeb
- knetbsd-arm knetbsd-hppa knetbsd-m32r knetbsd-m68k
- knetbsd-mips knetbsd-mipsel knetbsd-powerpc
- knetbsd-ppc64 knetbsd-s390 knetbsd-s390x knetbsd-sh3
- knetbsd-sh3eb knetbsd-sh4 knetbsd-sh4eb knetbsd-sparc
- netbsd-i386 netbsd-ia64 netbsd-alpha netbsd-amd64
- netbsd-armeb netbsd-arm netbsd-hppa netbsd-m32r
- netbsd-m68k netbsd-mips netbsd-mipsel netbsd-powerpc
- netbsd-ppc64 netbsd-s390 netbsd-s390x netbsd-sh3
- netbsd-sh3eb netbsd-sh4 netbsd-sh4eb netbsd-sparc
- openbsd-i386 openbsd-ia64 openbsd-alpha openbsd-amd64
- openbsd-armeb openbsd-arm openbsd-hppa openbsd-m32r
- openbsd-m68k openbsd-mips openbsd-mipsel openbsd-powerpc
- openbsd-ppc64 openbsd-s390 openbsd-s390x openbsd-sh3
- openbsd-sh3eb openbsd-sh4 openbsd-sh4eb openbsd-sparc
- hurd-i386 hurd-ia64 hurd-alpha hurd-amd64 hurd-armeb
- hurd-arm hurd-hppa hurd-m32r hurd-m68k hurd-mips
- hurd-mipsel hurd-powerpc hurd-ppc64 hurd-s390 hurd-s390x
- hurd-sh3 hurd-sh3eb hurd-sh4 hurd-sh4eb hurd-sparc
- </p>
- </footnote>
+ string</em> in some place, it should select one of the strings
+ provided by <tt>dpkg-architecture -L</tt>. The strings are in
+ the format <tt><var>os</var>-<var>arch</var></tt>, though the OS
+ part is sometimes elided, as when the OS is Linux.
</p>
<p>
<tt><var>arch</var>-unknown-linux</tt>, since the
<tt>unknown</tt> does not look very good.
</p>
+
+ <sect1 id="arch-wildcard-spec">
+ <heading>Architecture wildcards</heading>
+
+ <p>
+ A package may specify an architecture wildcard. Architecture
+ wildcards are in the format <tt>any</tt> (which matches every
+ architecture), <tt><var>os</var></tt>-any, or
+ any-<tt><var>cpu</var></tt>. <footnote>
+ Internally, the package system normalizes the GNU triplets
+ and the Debian arches into Debian arch triplets (which are
+ kind of inverted GNU triplets), with the first component of
+ the triplet representing the libc and ABI in use, and then
+ does matching against those triplets. However, such
+ triplets are an internal implementation detail that should
+ not be used by packages directly. The libc and ABI portion
+ is handled internally by the package system based on
+ the <var>os</var> and <var>cpu</var>.
+ </footnote>
+ </p>
+ </sect1>
</sect>
<sect>
use <file>/usr/bin/sensible-editor</file> and
<file>/usr/bin/sensible-pager</file> as the editor or pager
program respectively. These are two scripts provided in the
- Debian base system that check the EDITOR and PAGER variables
- and launch the appropriate program, and fall back to
- <file>/usr/bin/editor</file> and <file>/usr/bin/pager</file> if the
- variable is not set.
+ <package>sensible-utils</package> package that check the EDITOR
+ and PAGER variables and launch the appropriate program, and fall
+ back to <file>/usr/bin/editor</file>
+ and <file>/usr/bin/pager</file> if the variable is not set.
</p>
<p>
</p>
<p>
- Mailboxes are generally mode 660
- <tt><var>user</var>:mail</tt> unless the system
- administrator has chosen otherwise. A MUA may remove a
- mailbox (unless it has nonstandard permissions) in which
- case the MTA or another MUA must recreate it if needed.
- Mailboxes must be writable by group mail.
+ Mailboxes are generally either mode 600 and owned by
+ <var>user</var> or mode 660 and owned by
+ <tt><var>user</var>:mail</tt><footnote>
+ There are two traditional permission schemes for mail spools:
+ mode 600 with all mail delivery done by processes running as
+ the destination user, or mode 660 and owned by group mail with
+ mail delivery done by a process running as a system user in
+ group mail. Historically, Debian required mode 660 mail
+ spools to enable the latter model, but that model has become
+ increasingly uncommon and the principle of least privilege
+ indicates that mail systems that use the first model should
+ use permissions of 600. If delivery to programs is permitted,
+ it's easier to keep the mail system secure if the delivery
+ agent runs as the destination user. Debian Policy therefore
+ permits either scheme.
+ </footnote>. The local system administrator may choose a
+ different permission scheme; packages should not make
+ assumptions about the permission and ownership of mailboxes
+ unless required (such as when creating a new mailbox). A MUA
+ may remove a mailbox (unless it has nonstandard permissions) in
+ which case the MTA or another MUA must recreate it if needed.
</p>
<p>
</list>
</item>
- <item>
- Speedo fonts must be placed in
- <file>/usr/share/fonts/X11/Speedo/</file>.
- </item>
-
<item>
Type 1 fonts must be placed in
<file>/usr/share/fonts/X11/Type1/</file>. If font
Subdirectories of <file>/usr/share/fonts/X11/</file>
other than those listed above must be neither
created nor used. (The <file>PEX</file>, <file>CID</file>,
- and <file>cyrillic</file> directories are excepted for
- historical reasons, but installation of files into
- these directories remains discouraged.)
+ <file>Speedo</file>, and <file>cyrillic</file> directories
+ are excepted for historical reasons, but installation of
+ files into these directories remains discouraged.)
</item>
<item>
</p>
</sect1>
- <sect1>
+ <sect1 id="appdefaults">
<heading>Application defaults files</heading>
<p>
<p>
Customization of programs' X resources may also be
supported with the provision of a file with the same name
- as that of the package placed in the
- <file>/etc/X11/Xresources/</file> directory, which must
- registered as a <tt>conffile</tt> or handled as a
+ as that of the package placed in
+ the <file>/etc/X11/Xresources/</file> directory, which
+ must be registered as a <tt>conffile</tt> or handled as a
configuration file.<footnote>
Note that this mechanism is not the same as using
app-defaults; app-defaults are tied to the client
<heading>Installation directory issues</heading>
<p>
- Packages using the X Window System should not be
- configured to install files under the
- <file>/usr/X11R6/</file> directory. The
- <file>/usr/X11R6/</file> directory hierarchy should be
+ Historically, packages using the X Window System used a
+ separate set of installation directories from other packages.
+ This practice has been discontinued and packages using the X
+ Window System should now generally be installed in the same
+ directories as any other package. Specifically, packages must
+ not install files under the <file>/usr/X11R6/</file> directory
+ and the <file>/usr/X11R6/</file> directory hierarchy should be
regarded as obsolete.
</p>
<p>
- Programs that use GNU <prgn>autoconf</prgn> and
- <prgn>automake</prgn> are usually easily configured at
- compile time to use <file>/usr/</file> instead of
- <file>/usr/X11R6/</file>, and this should be done whenever
- possible. Configuration files for window managers and
- display managers should be placed in a subdirectory of
- <file>/etc/X11/</file> corresponding to the package name due
- to these programs' tight integration with the mechanisms
- of the X Window System. Application-level programs should
- use the <file>/etc/</file> directory unless otherwise mandated
- by policy.
+ Include files previously installed under
+ <file>/usr/X11R6/include/X11/</file> should be installed into
+ <file>/usr/include/X11/</file>. For files previously
+ installed into subdirectories of
+ <file>/usr/X11R6/lib/X11/</file>, package maintainers should
+ determine if subdirectories of <file>/usr/lib/</file> and
+ <file>/usr/share/</file> can be used. If not, a subdirectory
+ of <file>/usr/lib/X11/</file> should be used.
</p>
<p>
- The installation of files into subdirectories
- of <file>/usr/X11R6/include/X11/</file> and
- <file>/usr/X11R6/lib/X11/</file> is now prohibited;
- package maintainers should determine if subdirectories of
- <file>/usr/lib/</file> and <file>/usr/share/</file> can be used
- instead.
- </p>
-
- <p>
- Packages should install any relevant files into the
- directories <file>/usr/include/X11/</file> and
- <file>/usr/lib/X11/</file>, but if they do so, they must
- pre-depend on <tt>x11-common (>=
- 1:7.0.0)</tt><footnote>
- <p>
- These libraries used to be all symbolic
- links. However, with <tt>X11R7</tt>,
- <tt>/usr/include/X11</tt> and <tt>/usr/lib/X11</tt>
- are now real directories, and packages
- <strong>should</strong> ship their files here instead
- of in <tt>/usr/X11R6/{include,lib}/X11</tt>.
- <tt>x11-common (>= 1:7.0.0) </tt> is the package
- responsible for converting these symlinks into
- directories.
- </p>
- </footnote>
+ Configuration files for window, display, or session managers
+ or other applications that are tightly integrated with the X
+ Window System may be placed in a subdirectory
+ of <file>/etc/X11/</file> corresponding to the package name.
+ Other X Window System applications should use
+ the <file>/etc/</file> directory unless otherwise mandated by
+ policy (such as for <ref id="appdefaults">).
</p>
</sect1>
</p>
<p>
- Due to limitations in current implementations, all characters
- in the manual page source should be representable in the usual
- legacy encoding for that language, even if the file is
- actually encoded in UTF-8. Safe alternative ways to write many
- characters outside that range may be found in
- <manref name="groff_char" section="7">.
+ If a localized version of a manual page is provided, it should
+ either be up-to-date or it should be obvious to the reader that
+ it is outdated and the original manual page should be used
+ instead. This can be done either by a note at the beginning of
+ the manual page or by showing the missing or changed portions in
+ the original language instead of the target language.
</p>
</sect>
</p>
<p>
- Your package should call <prgn>install-info</prgn> to update
- the Info <file>dir</file> file in its <prgn>postinst</prgn>
- script when called with a <tt>configure</tt> argument, for
- example:
- <example compact="compact">
-install-info --quiet --section Development Development \
- /usr/share/info/foobar.info
- </example></p>
-
- <p>
- It is a good idea to specify a section for the location of
- your program; this is done with the <tt>--section</tt>
- switch. To determine which section to use, you should look
- at <file>/usr/share/info/dir</file> on your system and choose the most
- relevant (or create a new section if none of the current
- sections are relevant). Note that the <tt>--section</tt>
- flag takes two arguments; the first is a regular expression
- to match (case-insensitively) against an existing section,
- the second is used when creating a new one.</p>
-
- <p>
- You should remove the entries in the <prgn>prerm</prgn>
- script when called with a <tt>remove</tt> argument:
- <example compact="compact">
-install-info --quiet --remove /usr/share/info/foobar.info
- </example></p>
-
- <p>
- If <prgn>install-info</prgn> cannot find a description entry
- in the Info file you must supply one. See <manref
- name="install-info" section="8"> for details.</p>
+ The <prgn>install-info</prgn> program maintains a directory of
+ installed info documents in <file>/usr/share/info/dir</file> for
+ the use of info readers.<footnote>
+ It was previously necessary for packages installing info
+ documents to run <prgn>install-info</prgn> from maintainer
+ scripts. This is no longer necessary. The installation
+ system now uses dpkg triggers.
+ </footnote>
+ This file must not be included in packages. Packages containing
+ info documents should depend on <tt>dpkg (>= 1.15.4) |
+ install-info</tt> to ensure that the directory file is properly
+ rebuilt during partial upgrades from Debian 5.0 (lenny) and
+ earlier.
+ </p>
+
+ <p>
+ Info documents should contain section and directory entry
+ information in the document for the use
+ of <prgn>install-info</prgn>. The section should be specified
+ via a line starting with <tt>INFO-DIR-SECTION</tt> followed by a
+ space and the section of this info page. The directory entry or
+ entries should be included between
+ a <tt>START-INFO-DIR-ENTRY</tt> line and
+ an <tt>END-INFO-DIR-ENTRY</tt> line. For example:
+ <example>
+INFO-DIR-SECTION Individual utilities
+START-INFO-DIR-ENTRY
+* example: (example). An example info directory entry.
+END-INFO-DIR-ENTRY
+ </example>
+ To determine which section to use, you should look
+ at <file>/usr/share/info/dir</file> on your system and choose
+ the most relevant (or create a new section if none of the
+ current sections are relevant).<footnote>
+ Normally, info documents are generated from Texinfo source.
+ To include this information in the generated info document, if
+ it is absent, add commands like:
+ <example>
+@dircategory Individual utilities
+@direntry
+* example: (example). An example info directory entry.
+@end direntry
+ </example>
+ to the Texinfo source of the document and ensure that the info
+ documents are rebuilt from source during the package build.
+ </footnote>
+ </p>
</sect>
<sect>
<p>
Please note that this does not override the section on
changelog files below, so the file
- <file>/usr/share/<var>package</var>/changelog.Debian.gz</file>
+ <file>/usr/share/doc/<var>package</var>/changelog.Debian.gz</file>
must refer to the changelog for the current version of
<var>package</var> in question. In practice, this means
that the sources of the target and the destination of the
<p>
Every package must be accompanied by a verbatim copy of its
- copyright and distribution license in the file
+ copyright information and distribution license in the file
<file>/usr/share/doc/<var>package</var>/copyright</file>. This
file must neither be compressed nor be a symbolic link.
</p>
</p>
<p>
- Packages in the <em>contrib</em> or <em>non-free</em> categories
- should state in the copyright file that the package is not part
- of the Debian GNU/Linux distribution and briefly explain why.
+ Packages in the <em>contrib</em> or <em>non-free</em> archive
+ areas should state in the copyright file that the package is not
+ part of the Debian GNU/Linux distribution and briefly explain
+ why.
</p>
<p>
<p>
Packages distributed under the UCB BSD license, the Apache
license (version 2.0), the Artistic license, the GNU GPL
- (version 2 or 3), the GNU LGPL (versions 2, 2.1, or 3), and
- the GNU FDL (version 1.2) should refer to the corresponding
+ (version 2 or 3), the GNU LGPL (versions 2, 2.1, or 3), and the
+ GNU FDL (versions 1.2 or 1.3) should refer to the corresponding
files under <file>/usr/share/common-licenses</file>,<footnote>
<p>
In particular,
<file>/usr/share/common-licenses/GPL-3</file>,
<file>/usr/share/common-licenses/LGPL-2</file>,
<file>/usr/share/common-licenses/LGPL-2.1</file>,
- <file>/usr/share/common-licenses/LGPL-3</file>, and
- <file>/usr/share/common-licenses/GFDL-1.2</file>
+ <file>/usr/share/common-licenses/LGPL-3</file>,
+ <file>/usr/share/common-licenses/GFDL-1.2</file>, and
+ <file>/usr/share/common-licenses/GFDL-1.3</file>
respectively.
</p>
</footnote> rather than quoting them in the copyright
</example>
To view the copyright file for a package you could use this command:
<example>
- dpkg --fsys-tarfile <var>filename</var>.deb | tar xOf - \*/copyright | pager
+ dpkg --fsys-tarfile <var>filename</var>.deb | tar xOf - --wildcards \*/copyright | pager
</example>
</p>
</sect>
</p>
<p>
- The maintainer scripts are guaranteed to run with a
- controlling terminal and can interact with the user.
- See <ref id="controllingterminal">.
+ The maintainer scripts are not guaranteed to run with a
+ controlling terminal and may not be able to interact with
+ the user. See <ref id="controllingterminal">.
</p>
</item>
</p>
</sect1>
-
- <sect1 id="pkg-dpkgchangelog">
- <heading><file>debian/changelog</file></heading>
-
- <p>
- See <ref id="dpkgchangelog">.
- </p>
-
- <sect2><heading>Defining alternative changelog formats
- </heading>
-
- <p>
- It is possible to use a different format to the standard
- one, by providing a parser for the format you wish to
- use.
- </p>
-
- <p>
- In order to have <tt>dpkg-parsechangelog</tt> run your
- parser, you must include a line within the last 40 lines
- of your file matching the Perl regular expression:
- <tt>\schangelog-format:\s+([0-9a-z]+)\W</tt> The part in
- parentheses should be the name of the format. For
- example, you might say:
- <example>
- @@@ changelog-format: joebloggs @@@
- </example>
- Changelog format names are non-empty strings of alphanumerics.
- </p>
-
- <p>
- If such a line exists then <tt>dpkg-parsechangelog</tt>
- will look for the parser as
- <file>/usr/lib/dpkg/parsechangelog/<var>format-name</var></file>
- or
- <file>/usr/local/lib/dpkg/parsechangelog/<var>format-name</var></file>;
- it is an error for it not to find it, or for it not to
- be an executable program. The default changelog format
- is <tt>dpkg</tt>, and a parser for it is provided with
- the <tt>dpkg</tt> package.
- </p>
-
- <p>
- The parser will be invoked with the changelog open on
- standard input at the start of the file. It should read
- the file (it may seek if it wishes) to determine the
- information required and return the parsed information
- to standard output in the form of a series of control
- fields in the standard format. By default it should
- return information about only the most recent version in
- the changelog; it should accept a
- <tt>-v<var>version</var></tt> option to return changes
- information from all versions present <em>strictly
- after</em> <var>version</var>, and it should then be an
- error for <var>version</var> not to be present in the
- changelog.
- </p>
-
- <p>
- The fields are:
- <list compact="compact">
- <item><qref id="f-Source"><tt>Source</tt></qref></item>
- <item><qref id="f-Version"><tt>Version</tt></qref> (mandatory)</item>
- <item><qref id="f-Distribution"><tt>Distribution</tt></qref> (mandatory)</item>
- <item><qref id="f-Urgency"><tt>Urgency</tt></qref> (mandatory)</item>
- <item><qref id="f-Maintainer"><tt>Maintainer</tt></qref> (mandatory)</item>
- <item><qref id="f-Date"><tt>Date</tt></qref></item>
- <item><qref id="f-Changes"><tt>Changes</tt></qref> (mandatory)</item>
- </list>
- </p>
-
- <p>
- If several versions are being returned (due to the use
- of <tt>-v</tt>), the urgency value should be of the
- highest urgency code listed at the start of any of the
- versions requested followed by the concatenated
- (space-separated) comments from all the versions
- requested; the maintainer, version, distribution and
- date should always be from the most recent version.
- </p>
-
- <p>
- For the format of the <tt>Changes</tt> field see
- <ref id="f-Changes">.
- </p>
-
- <p>
- If the changelog format which is being parsed always or
- almost always leaves a blank line between individual
- change notes these blank lines should be stripped out,
- so as to make the resulting output compact.
- </p>
-
- <p>
- If the changelog format does not contain date or package
- name information this information should be omitted from
- the output. The parser should not attempt to synthesize
- it or find it from other sources.
- </p>
-
- <p>
- If the changelog does not have the expected format the
- parser should exit with a nonzero exit status, rather
- than trying to muddle through and possibly generating
- incorrect output.
- </p>
-
- <p>
- A changelog parser may not interact with the user at
- all.
- </p>
- </sect2>
- </sect1>
-
<sect1 id="pkg-srcsubstvars">
<heading><file>debian/substvars</file> and variable substitutions</heading>
supposing that a <prgn>smailwrapper</prgn> package wishes to
install a wrapper around <file>/usr/sbin/smail</file>:
<example>
- if [ install = "$1" ]; then
- dpkg-divert --package smailwrapper --add --rename \
- --divert /usr/sbin/smail.real /usr/sbin/smail
- fi
- </example> Testing <tt>$1</tt> is necessary so that the script
- doesn't try to add the diversion again when
- <prgn>smailwrapper</prgn> is upgraded. The <tt>--package
- smailwrapper</tt> ensures that <prgn>smailwrapper</prgn>'s
- copy of <file>/usr/sbin/smail</file> can bypass the diversion and
- get installed as the true version.
+ dpkg-divert --package smailwrapper --add --rename \
+ --divert /usr/sbin/smail.real /usr/sbin/smail
+ </example> The <tt>--package smailwrapper</tt> ensures that
+ <prgn>smailwrapper</prgn>'s copy of <file>/usr/sbin/smail</file>
+ can bypass the diversion and get installed as the true version.
+ It's safe to add the diversion unconditionally on upgrades since
+ it will be left unchanged if it already exists, but
+ <prgn>dpkg-divert</prgn> will display a message. To suppress that
+ message, make the command conditional on the version from which
+ the package is being upgraded:
+ <example>
+ if [ upgrade != "$1" ] || dpkg --compare-versions "$2" lt 1.0-2; then
+ dpkg-divert --package smailwrapper --add --rename \
+ --divert /usr/sbin/smail.real /usr/sbin/smail
+ fi
+ </example> where <tt>1.0-2</tt> is the version at which the
+ diversion was first added to the package. Running the command
+ during abort-upgrade is pointless but harmless.
</p>
<p>
The postrm has to do the reverse:
<example>
- if [ remove = "$1" ]; then
+ if [ remove = "$1" -o abort-install = "$1" -o disappear = "$1" ]; then
+ dpkg-divert --package smailwrapper --remove --rename \
+ --divert /usr/sbin/smail.real /usr/sbin/smail
+ fi
+ </example> If the diversion was added at a particular version, the
+ postrm should also handle the failure case of upgrading from an
+ older version (unless the older version is so old that direct
+ upgrades are no longer supported):
+ <example>
+ if [ abort-upgrade = "$1" ] && dpkg --compare-versions "$2" lt 1.0-2; then
dpkg-divert --package smailwrapper --remove --rename \
--divert /usr/sbin/smail.real /usr/sbin/smail
fi
- </example>
+ </example> where <tt>1.02-2</tt> is the version at which the
+ diversion was first added to the package. The postrm should not
+ remove the diversion on upgrades both because there's no reason to
+ remove the diversion only to immediately re-add it and since the
+ postrm of the old package is run after unpacking so the removal of
+ the diversion will fail.
</p>
<p>
projects / debian / debian-policy.git / blobdiff